Not able to connect IPS on a graphics mode
Hello
"I updated the version of the engine of IPS-4240-k9 of" 2.0000 E4 to "engine 7.0 Version (4) E4", after the improvement, I am able to connect through SSH (putty) but if I try to connect through graphical Mode it showing "Please wait while IDM is current sever configuration loading" after 100% ' " , it in error in loading
"errSystemError-ct - sensorApp.454 does not, please check it out the processes in the system.
Coonect to the specified IO::clientPipe failed. "
This type of error, I restarted the IPS, but still, I am faced with the same error. Kindly help me solve this problem
Regadrs,
Saidou
Hello
Try the decommissioning of the sensor using the following procedure:
http://www.Cisco.com/en/us/docs/security/IPS/6.0/Configuration/Guide/IDM/dmImage.html#wp1044573
If she solves problems, try to install once more. If the problem persists, I would suggset to open a TAC case. This isn't a known issue as far as I KNOW.
Concerning
Farrukh
Tags: Cisco Security
Similar Questions
-
Not able to connect to essbase in standalone mode
Hi allI installed essbase 11.1.2.2 in stand-alone mode. After the installation of the services are running. I tried to connect to via \user_project\epmsystem1\EssbaseServer\essbaseserver1\bin < EPMHOME > maxl essbase. But he failed because of invalid connection. I'm in the name (ID epm_admin PWD xxxxx) password which I entered during Setup. Am I missing something?
Concerning
SB
No, I guess that answer at the bottom of the post:
-
HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP
Hello
I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.
When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).
My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.
Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?
the same connection problem, of course, it happens when I do touch printer and console web administration, of course.
In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices
I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.
My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.
Thanks in advance for your help,
Lorenzo
Hi Lorenzo,.
To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)
You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.
Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:
http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html
If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:
Kind regards
Shlomi
-
I am not able to connect to my facebook account and the error message reads "this website does not provide information on property." Help, please
only title bar opens and nothing else... Please help
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Also check the cookie exceptions.
-
2000-2314TU HP: not able to connect to the LAN and Wireless network
Hello
I have a HP laptop and it had Windows 8 is installed. It was very slow so I installed windows 7. After the downgrade, I am not able to connect to LAn or wireless n/w. I think that there are some missing drivers. Can anyone please suggest what drivers should I use?
You are the very welcome.
-
Satellite L650-11R - not able to connect to public networks
Hello.
Although I am very satisfied with my laptop, I have a problem. I am not able to connect to public networks using ethernet cable to some location (not everywhere) with different laptops users have no problem connecting to networks of same that I can't, so I think that the problem is my laptop.
I always get the error 'unidentified network '. I tried to replace the cable but the problem still remains.
Any suggestions?
It is not easy to tell what the problem may be, but it is certainly related to the firewall and network settings. Try to disable the firewall and check the connectivity.
Try to compare the LAN settings with others who use the same operating system.
-
Not able to connect to the server with modem 56 k
I try to connect my Tecra via modem 56 k Internet.
Also, I tried with another computer laptop with the same details and that worked.
But when I try it on my Tecra I get an error that is not able to connect to the server.So I think that it is a parameter that is not defined correctly for the modem.
(If you compare it to another laptop all parameters are the same as windows).Thanks in advance,
Theo
Hello Theo
Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.
After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.
-
my ipod nano is not able to connect to itunes.
my ipod nano is not able to connect to itunes.
What version of Nano? What kind of computer? What operating system on the computer? What happens when you try to connect?
-
I am not able to connect to the main wifi network but can connect to the network of comments.
Hello
This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.
The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...
Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.
Wait a minute
Turn on the modem first and leave a few minutes, he managed by itself
Turn on the next device that is connected to a modem and leaves turn a good minute
Keep turn on devices one by one at a time, one minute apart, until the entire network is back
Recheck the network and report on your results
-
not able to connect to the game of google on mobile data store
I bought gold x 2 lenovo 32 GB vibe.
in this unit, I am not able to connect to the playstore in mobile data, it says check your connection. But Internet is active n I can navigate can open FB also.
Yet one thing I'm not receving messages instantly in whatsapp, fb, viber. Once I open the app and then receive only the mesaages.
and after the last firmware update whatsapp contacts are not synchronized, integrated Lenovo Security app is diabling syning whatsapp contact.
Please give the solution.
-
Not able to connect to Wifi, USB ports, bluetooth
Hello team
I bought the new HP laptop today. I have installed Windows 7 OS. I am not able to connect to Wifi, not be able to use the blue tooth, not be connected to the USB. I downloaded the drivers from the website of the other computer. But how can I install it with one of them works. Please help us on the question mentioned.
Product number: G8D85PA #ACJ
Thank you
Sunil
Hi Sunil_motukuri,
Thank you for visiting the Forums HP's Support and Welcome.I would be happy to help you. I read your thread on your computer laptop 15-g030au HP and who need wireless for Windows 7 drivers. Here is a link to the drivers.
Hope this helps you.
Thank you.
-
I am not able to connect a remote desktop from my laptop computer.
Remote Desktop connection problm
I am not able to connect to a remote desktop from my laptop with Windows XP Professional service Pack 2, but at the sametime I can access the remote computer from other laptops. I tried manythings but it doesnot work.can someone help me? Thank youHello
Is there an error code or the message that displayed when you try to establish the remote desktop connection?Try it out below mentioned methods and check if this may help solve the problem.Method 1:
Check out the link and follow the steps.Method 2:
You can also visit the link below and try the methods in the article.How to use the Windows XP Professional Remote Desktop feature
http://support.Microsoft.com/kb/315328 -
Original title: Win32/Sirefef.DAtrojan
Recently, I got the following virus. Win32/Sirefef.DAtrojan
I was not able to connect to the internet since then.Y at - there someone who can help me with the connection to the internet?I have a Dell XPS600Microsoft XP ProfessionalHello
1. what happens when you try to connect to the internet?
2 - is confined to the browser Internet Explorer problem?I suggest you perform a full scan of the system.Here is a link that will give you know howPerform a full scan of the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. -
I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.
original title: Reinstalling windows xpHi Lynn B,.
· What is the exact error message?
· What type of installation you perform? Is this an upgrade or fresh on-site installation?
· What service pack is installed on your computer?
· You have the Windows installation disc?
You can consult the following Microsoft articles:
Install, reinstall, or uninstall Windows
http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
How to perform an upgrade on the spot (reinstallation) of Windows XP
http://support.Microsoft.com/kb/978788
Hope this information helps.
-
not able to connect a printer shared in task force gives the access error is to deny cannot coonect
not able to connect a printer shared in task force gives the access error is to deny cannot coonect
Hello
1. don't you make changes on the computer before this problem?
2. What is the brand and model of the printer?
3. What is the full and exact error message?
4. have you set a password to the shared printer?Please answer these questions and provide us with more information. This could help us help you better.
See the articles that may be useful.
"Access denied" error message when you print to a network printer, or view the properties of the printer
http://support.Microsoft.com/kb/307053
Cannot use network printer if your password is not saved
http://support.Microsoft.com/kb/312055
Maybe you are looking for
-
can address bar and search bar be adjusted
I find the too narrow address bar. If it is adjustable, I hope someone can tell me how. Ditto for the search bar.
-
Whenever I get a PDF attachment in an email on my iPad, it opens automatically in electronic mail instead of in Adobe Acrobat. How can I stop this from happening? I need to print an attachment that I received, not my whole email.
-
Tecra A8-158 freezes several times
I use a Tecra A8-158. I bought in February and after that maybe in the first week of use, he got froze up.I remember that in the first month, that it froze only 2 times, but after that it goes as many times. Sometimes it works fine for days and somet
-
RGB to the transfer of the HSI COLOR SPACE
An organization can help me for example how to change the color space of the image RGB to HSI image and then save and display the new image
-
Better make a link to the latest DirectX end user runtime web install?
What is the best way to link (from our application) to the latest DirectX end user runtime web install? http://go.Microsoft.com/fwlink/?prd=11234&pver=latest%20DX%20Web&plcid=0x409&clcid=0x409orhttp://www.Microsoft.com/downloads/details.aspx?FamilyId