It is said he was able to connect to my server but there is no change

Similar Questions

• Not able to connect to the server via the AFN TCP

  Hi all

  After Googling carefully I finally decided to post my problem which is really sent me nightmares.

  In my application, I try to connect to a TCP server by using the operator of internet network and after the connection string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; connectionTimeout = 30000; APN =; tunnelauthusername =; tunnelauthpassword =; » ;

  I am able to connect to the internet using the phone's browser, but not able to connect to the TCP server via app.

  In my device APN authentication is disabled by default and the AFN, the name of user and password fields are white that's why I took these settings like white with a value in the connection string.

  When I try to connect via wifi network using the suite of string

  URL = "socket: / /" + ip + ":" + port + ";" deviceside = true; interface = wifi; connectionTimeout = 30000;

  I am able to connect to the server, but not in the case via the AFN.

  Please help me...

  I'm here just stuck and not finding a way out.

  Thank you

  Finally I found the solution to the problem...

  I used ConnectionFactory (network API) to connect to the TCP server and the used connection string is just

  'socket://127.0.0.1:8089 '.

  No need to specify the APN, user name, and password.

  Here's the code used

                   ConnectionFactory connFact = new ConnectionFactory();
                    ConnectionDescriptor connDesc;
                    connDesc = connFact.getConnection("socket://127.0.0.1:8087");
  

• Able to connect laptop to HDTV but no signal goes to the laptop

  OT: was able to connect my laptop to my hd tv oe it shows it plugged into the TV, but no signal goes to the laptop,
  I managed to connect my laptop to my HD TV, but when I went to connect today he showed the link on the TV, but there was no signal to tv

  Hi Carlporter,

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2
  I suggest you check the connection settings for the signal.

  Connect your computer to a TV (you will need if you have a TV high definition)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  TV on your computer: from understanding and TV (HDTV signal scenarios) tuners TV signals
  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Solve problems with watching TV on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

• When reading emails, said TB connected to the server, but is not download emails

  The following suddenly started happening. (Things are working very well for several months on the same account settings).

  When I try to retrieve the email from my IMAP e-mail server, there is a message at the bottom that says that Thunderbird is connected to the server, but nothing happens thereafter - no emails are downloaded.
  Thunderbird invites me even a password to connect to the IMAP server as it usually does.

  However, note that I * can * send emails without problem (via the configured SMTP server).
  As well, I have no problem reading the emails on the server even on other customers of emails with same account settings.

  The problem started after I upgraded to Thunderbird 38.2.0, an earlier version of a few months back).
  Thunderbird prompted me to do the upgrade, and it can have kicked so he was still connecting and authenticating to the IMAP server - which is just speculate offshore.

  Any ideas what I can do?

  Details of the platform: Thunderbird 38.2.0, Windows 7 x 64, entering via the SSL Protocol IMAP, SMTP outgoing via the SSL protocol

  Thanks in advance

  Glen

  Thunderbird 38 is indeed longer than previous versions... See my blog. There are a few things you can do. Ranging from Fix Security broken on the server to a temporary add-on which will establish market if the server hotfix is delayed.

  http://thunderbirdtweaks.blogspot.com.au/2015/07/logjam-and-Thunderbird.html

• There was a problem connecting to the server 'SERVER NAME' error guard appearing

  There was a problem connecting to the server 'SERVER NAME' error guard appearing even though the server is not on my current network.  I recently moved my iMac to a different location and a different network, and now he constantly tries to connect to the old server.  This message appears every 30 seconds and several of those who appear (see pictures) it's extremely frustrating because it makes the machine almost useless because I am constantly closing them.  No matter how many times I try to stop the activity monitor it it keeps reappearing, and I even tried a few terminal commands that I found online, then restarted the computer, but still had no success.  I would appreciate all the advice really.

  I hope that gives you an idea of what I got!

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• I recently bought a new computer. I don't have no transfer my itunes library (or save) and eventually remove my entire itunes on my ipod library. I was able to recover my purchased music, but is there a way to retrieve the CD I downloaded too?

  I recently bought a new computer. I didn't have to transfer my itunes library or return it high and ended up to the top of the deletion of my library on my ipod. I was able to recover the purchased music, but is it possible to recover the music burned to a CD?

  Your i-device was not designed for unique storage of your media. It is not that a transfer backup device and media has been planned with you keep a master copy of your media on a computer that is in itself independently supported against loss.  To use a device with a different configuration, you pass the old library from a computer or a backup directly in the new configuration, not the device to the library. Synchronization of media isn't a way, computer to the device, update the contents of the device to the content on the computer, update or restore the content on a computer. The exception is iTunes Store purchases that can be transferred to a computer.

  Redownload or transfer your iTunes Store purchases an iPhone, iPad or iPod to computer - https://support.apple.com/en-us/HT201267 - 'this feature only works for content purchased from the iTunes Store. From iOS9 is more apps that now need to be re-downloaded directly from the store.

  To transfer other items from an i-device to a computer, you will need to use third-party commercial software.  See this document in turingtest2: recover your iTunes library from your iPod or device iOS - https://discussions.apple.com/docs/DOC-3991 even this method can fully recover what you originally had in the library. For example, in order to save space during synchronization if you had converted music files at a lower rate, or photos at a lower resolution, it is these lower quality files that will pick you up.

  If you subscribe to the Apple music, titles that are not part of the content that you have purchased or downloaded may not be transferred and must be downloaded directly from iCloud.

• I have Windows Vista and was able to SAVE flash from adobe, but it does not open.

  I have Windows Vista and was able to SAVE flash from adobe, but it does not open. Can someone send me a link to a fix. I can't open videos, games or live videos. Someone please help. Should I change my operating system?

  Software Adobe isn't really an option-backup software, you install adobe active X software to enable it. Whatever it is,

  Just go to macromedia.com to install adobe... If she refuses, then your user account is not set as an administrator, to change

  account, disable the parents settings. Macromedia's flash player.

• Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  Hello
  I am not able to coonect to a server by using the code below.
  
  If I try the same code on the server to connect it self, it works well. But when I try to connect to another server gives the error below. And I use the IBM Jdk when getting this error. Y at - it a setting to avoid this error.
  
  Error:
  INFO: Add /usr/jdk/instances/jdk1.6.0/jre/lib/ext/sunpkcs11.jar to the CLASSPATH of the extension
  ConfigurationLoader
  November 30, 2010 16:33:12 < clinit > com.sshtools.j2ssh.transport.publickey.SshKeyPairFactory
  INFO: Loading public key algorithms
  Error so that SFTP
  java.util.NoSuchElementException
  at java.util.StringTokenizer.nextToken(StringTokenizer.java:332)
  at java.util.StringTokenizer.nextElement(StringTokenizer.java:390)
  to com.sshtools.j2ssh.transport.AbstractKnownHostsKeyVerification. < init >(Unknown Source)
  to com.sshtools.j2ssh.transport.ConsoleKnownHostsKeyVerification. < init >(Unknown Source)
  at com.sshtools.j2ssh.SshClient.connect (unknown Source)
  at fileTransfer.connectToServer(fileTransfer.java:18)
  at fileTransfer.main(fileTransfer.java:56)
  
  
  
  Code:
  public static boolean connectToServer (String serverIp, int serverPort, String userId, String password)
  {
  SFC SshClient = null;
  try {}
  System.out.println ("inside the Try to like his SFTP");
  ConfigurationLoader.initialize (false);
  System.out.println ("ConfigurationLoader");
  
  SFC = new SshClient();
  SFC. Connect (Ipserver, serverPort);
  System.out.println ("SFC. Connect");
  
  PasswordAuthenticationClient pwd = new PasswordAuthenticationClient();
  
  pwd.setUsername (userId);
  
  pwd.setPassword (password);
  
  int checkAuth = sfc.authenticate (pwd);
  System.out.println ("checkAuth" + checkAuth);
  
  If (checkAuth == 4) {}
  System.out.println ("AuthenticationProtocolState.Complete");
  
  SFTP SftpClient = sfc.openSftpClient ();
  sftp.Quit ();
  SFC. Disconnect();
  }
  on the other
  {
  throw new Exception ("invalid user name or password for the user");
  }
  }
  catch (System.Exception e)
  {
  System.out.println ("Error While SFTP");
  SFC. Disconnect();
  e.getStackTrace ();
  Returns false;
  }
  Returns true;
  }

  Swapped

  Sun Solaris 5.10 - SSH 1.1.3 - Not able to connect to the server by ssh - Urgent

  @O.P.
  Don't, don't.
  In the future, to choose the most appropriate forum and make your post.
  Swap shall be the same as the rude spamming.
  I'm not aware of any web-site-of-value forum that would promote the permutation in its directions on the label.

  ... and for what is "Urgent"?
  This web site is for the end-user community gather and discuss various topics in general conversations. Your time constraints are irrelevant. If you need real support for something, then log a support case and pay for a quick response.

  See the FAQ in the link at the top of the page.

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• Hi there, was trying to download Adobe elements 13 but there is no facility to add information to the card at checkout

  Hi there, was trying to download Adobe elements 13 but there is no facility to add information to the card at checkout

  Hi Gavin,

  Please try to buy the product from the link below:

  Photo editor, photo editing | Adobe Photoshop Elements 13

  Hope that helps!

  Kind regards

  Sheena

• How can I add the "open a new tab" button back to tabs &amp; bookmarks to the menu bar? I was able to click and drag the bookmarks there and the tab button has always been thr

  How can I add the "open a new tab" plus button back to tabs & bookmarks to the menu bar? I was able to click on and drag the bookmarks and folders containing the bookmarks in the menu bookmark to a bar of tools and click the tab + button was always on the right side of a tab before seeing ff 13.0.1 on windows 7.

  I need back, areas have red around em

  http://i48.Tinypic.com/25gue0x.jpg

  Draggin ' bookmarks toolbar items, it's done. Thank you for the mind can.

• Check error: there was a problem connecting to the server Apple ID

  When I try to connect to my iTunes on my Windows laptop account it is said there is a problem connecting to the Apple ID server. This problem did not begin until 2 days. I have the latest version of iTunes and Windows.

  What is the number of the version of iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Start by missing error MSI.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Leave a post by: turingtest2

  On the PC, when connecting each device, it loads a separate driver. You can try this trick when you want to get iTunes recognizes the iPhone 6. Thanks to the user of the CSA turingtest2 for the tip.

  Try the following:

  Open Control Panel > Device Manager

  Plug in your device

  Locate Bus USB Controllers > Apple Mobile Device USB Driver.
  It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.

  Right-click and select software update of the driver...

  Click Browse my computer for driver software

  Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers

  Click on let me pick from a list of drivers for devices on my computer

  Click on Apple Mobile Device USB Driver

  Click Next, then close and exit the Device Manager

  Leave a post by: ChrisJ4203

• Firefox said it is unable to connect to the net but IE and the signal is strong

  Firefox has been great until this afternoon. Then all of a sudden it gave me an error message that he was "unable to connect." "" The laptop thinks it entirely connected wireless to the Homehub. I have been in contact with BT that kept me in line with IE and say that the problem is with Firefox. I uninstalled and reinstalled Firefox and I'm still getting the message that it is unable to connect. Help, please!
  PS Firefox works perfectly on my desk.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Not able to connect to the server OPAM using the customer remains

  Hi all

  I have a working server OPAM. I am able to connect to the console of OPAM using url "http://localhost:18101/oinav/opam and could perform all operations as managing the Fund, account, target, check in etc.." Now I'm trying to use the rest of the OPAM API to achieve the goal of managing, according to the documents I should connect to the server of OPAM "https://< servername >: 18102/opam /" but I get no response from the server when I tried to connect in this way. If I try to connect using "http://localhost:18101/oinav/opam"URL I am able to connect and get the response code 200, but not able to invoke any API and get the error"page not found". " I don't know why OPAM server is not sensitive on the SSL port, when I am able to do all operations using oPAM console that still connect to the OPAM server using SSL port.

  Please help me.

  Did the nslookup of your match servername IP address than 18102 listening?

  That is to say

  netstat - year | grep LISTEN | grep 18102

  vs

  Nslookup serverName

  In addition, you imported the SSL certificate for https OPAM instance into your customer REMAINS reliable?