About adding missing elements

Similar Questions

• Receive an error about a missing file message when I try to open Firefox

  When I tried to open Firefox today I received a message about a missing (Wrusr.ddl) file and that Firefox was not able to open. I tried uninstalling and reinstalling, but it did not work. I have no idea what this file is or where it went. I used Firefox 2 days ago and it was working fine. The only thing that changed between then and now was that I renewed my antivirus software but I certainly did not remove all the files and I made sure that Firefox is permitted to access the internet. I use this same software (Webroot) with Firefox for years and never had any problems until today. Any help would be greatly appreciated! I've included a screenshot of the error message below.

  Webroot seems to provide a tool for such an occasion: http://www.webroot.com/prodCheck/?pc=64150 & origrc = 1 & co = 221 & Midwest = 7 & rel = 6 & bld = 38 & lang = to & loc = AUS & kc = ppc % 60lkik % 5th % 5Eafhgpewgfa opi = 2 & Moy = 6 & omn = 1 & osl = in

• Addition of waveform with adding block - element wise or interpolated or...?

  Hello

  I see the block addition is beautifully overloaded to overlay waveforms and I would like to know how it works. Specifically, I want to know if using matrix addition (i.e. simply by adding the elements of each waveform) OR is he among the waveforms by interpolation and resampling to the points of time corresponding to the other or another method.

  I know that the sampling interval (dt) should be the same for both waveforms added, so I suspect it is using matrix addition, but don't know.

  To add a bit of context, I use this to add two waveforms of sampled data of a sinus waves up to 100 kHz. Sampling faster than my DAQ can exploit the difference in the two waveforms of departure time (t0) is an important part of the period. At this point, I think that the approach by adding simple matrix will not work.

  Thanks for any idea that you can give. See you soon

  -ron

  Hi Ron,

  I don't think there is a VI that does it for you. However, it should not be too difficult to program yourself. There's a Subvi, called 'Get waveform components' that allows you to access the table variables (Y) t0, dt and the data type of waveform data. You can subtract the two start times to find the difference between the two waveforms (DAQ readings put a timestamp on the data). Then you can complete the table operations to create a lag in the data. A few other useful subvis are "Get the subset of waveform" or "Index Waveform Array", you can use depending on how you want to set up your program. Let me know if you need help with this programming. Good luck!

• I want a NEW computer, but I want Windows XP on it. I don't like about adding new fangled to it. I just want to use my OLD stuff. Is this possible?

  I want a NEW computer, but I want Windows XP on it.  I don't like about adding new fangled to it.  I just want to use my OLD stuff.  Is this possible?

  Hello

  If you are considering buying new PCs, you can go ahead and buy Windows 7 Professional, Ultimate or enterprise. These editions of Windows 7 supports Windows XP Mode, where you can use all programs Windows XP. You can also use the Windows compatibility mode to run Windows XP programs in Windows 7. For more information, see:

  Buy Windows 7: main questions

  http://Windows.Microsoft.com/en-us/Windows/shop/buying-Windows-7-top-questions

• I've added two elements (accessibility and analyze) in the Tools menu of right hand.  How to remove or hide?  Or at least rearrange the elements of the toolbar. I want to Sign & certify be the last element/section.  Thank you.

  I've added two elements (accessibility and analyze) in the Tools menu of right hand.  How to remove or hide?  Or at least rearrange the elements of the toolbar. I want to Sign & certify be the last element/section.  Thank you.

  Hi Stacey Nathan,

  To remove the items from right toolbar, click Tools at the top.

  Then open the fall down to the accessibility or analyze and select 'delete the shortcut '.

  In a similar way, select "Add a shortcut" in the Tools drop-down menu to add to the tool on the right pane.

  Let us know if you need help.

  Kind regards

  Meenakshi

• Does anyone know how to reach someone by phone about the first Elements 10 resettlement?

  Does anyone know how to reach a human by phone at Adobe about the first Elements 10 resettlement?

  Thank you!

  https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html,

  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

• Missing elements of user interface after ui.dll "upgrade".

  I have a strange problem with installation on 64-bit Windows 8 LR5. After following the instructions on this page http://helpx.adobe.com/lightroom/kb/lightroom-5-crashes-editing-images.html missing elements of the user interface, the most obvious is the display of the grid, the film and the module selector.

  

  The photos are actually in the catalogue and can be seen in the Loupe, and then in the develop module.

  In the develop module, there are also a few missing pieces, as the histogram, the curve in the curve tool and the type of curve selector. The histogram shows on the library module.

  

  Returned ui.dll originally solves all problems.

  If someone has encountered this?

  'Hi,

  From the looks of it, you have a confrontation with the DLL, I can repeat what you see by renaming the old DLL to "ui.old.dll".

  From my experience with the DLL, make sure that you rename the old user interface. DLL for an extension that is NOT. DLL or. EXE, for example follow the instruction:

  10 rename ui.dll file in this folder to ui.dll.old, for a return upwards.

  Do not rename it as "old.ui.dll" or "ui.old.dll" as it will be loaded at startup.

  Don.

• Missing elements only on certain layers, only on certain pages, Ghost - CS6 INDD

  Items on certain layers, only on certain pages, disappeared while I was working on other pages in the document.

  • The layers Panel expands to show that there are several elements on the page, but elements (text boxes and a chart area) does not visibly show up on the page. Yes, I have reviewed the "layer options" - this isn't the problem
  • I'm not able to choose them, even when the file is a visible layers. Yes, shows the symbol of the eye. These issues all come while each layer is 'on' - so it's not the problem.
  • Only 2 of the 14 layers are made... and just over 10 pages (about 308), although not all the elements on these 2 layers disappeared on these 10 pages, there are a few anomalies that has not disappeared
    
  • If I stick a new element in another layer, while the box is checked I can move in my "layer of problem" and the form will visibly disappear (although always register as something existing in the layers panel). As long as I do not deselect, I can move it to another layer using the layers panel, and he re - appears. If I deselect the, I can not select the question again using the selection tool or layers panel again, but it still shows that the element exists in the layers panel. I have not found a way to deal with these elements 'Phantom' again. S.O.S.!

  I've never seen this problem before. At 3 other designers see it to confirm that I wasn't crazy. They never saw coming forward either.

  Working on a project to design complex book... I mean here on 2200K + links images, 308 pages, 40 + master pages and 14 active layers.

  Would love to no explanation for this software error.

  I wish l could explain it's "human error" but I have not worked on these affected pages today. I noticed missing items when I went to review the chapter. I worked in the file all day today... and it is very disturbing: I printed these performed 10 pages late yesterday afternoon. I went to retrieve this file in time Machiene, but my backup file also had the same problem of 'ghost elements' (even if it backed up once I have printed, and the impressions were very good). I had to go all the way back to file on Monday, which was pre-re-design of these pages.

  I use InDesign for 8 years and have never encountered a problem like this before. I hope that someone out there!

  -Bree

  Is there any other object in front of him, maybe - a large empty frame filled with perhaps paper? If this isn't the case, I would say that there is probably some kind of file corruption and I save a copy in the current state as backup, and then export to .idml to see if you can clean it. See remove minor corruption by exporting

  You should probably also do a Select All on the page and see if you see single-point stray objects or other objects that you do not (at the time on the screen of the page or in the layers panel). I saw maybe three cases in 8 or 9 years of single point objects with a fill assigned which caused all sorts of behavior strnge. I never managed to create on these intentionally, however.

• Questions about adding a Skype number

  First timer here, here are my questions, I live in Thailand, former U.S. citizen, have for years had major problems with government agencies to reach me by phone. My billing address is in CA, my verified phone number is thai. I believe that with a Skype CA phone number I can eliminate these problems, correct? As the Government agencies and US automated banking systems cannot recognize a 11 digit number.

  OK, so I did not have a first core of Galaxy attached to any diet, talk with a slot for sim card available. My intention is to buy a prepay sim for the available location local, and then add a Skype number. This Skype number wouldn't be usable wifi connected. A one year subscription is $52.25, but the site says nothing about other calling some how fees, or I've missed?

  With the second sim with a Skype number, dedicated to the United States calls only, and I was able to differentiate between the two by which the sim was used to receive the call. I receive a message if a call was made for me if it is not connected to wifi?

  Could I have the call transferred to my Thai number, if I were to buy call forwarding also?

  I intend to wait until I have answers from the community before I do anything.

  Thanks in advance for those who add their comments.

  Hi, what you're trying to do is possible in principle, but you do not add the number of Skype to a SIM.

  What happens, is that you install the Skype app on Google Store on your base premium Galaxy then receive calls and outgoing calls via the Skype in wifi or mobile data, if you add a local SIM card.

  Check Skype calling subscriptions and distribution rates to the United States and the Thailand (subscriptions especially if you make a lot of calls or transfer calls to a number of Thai). If you buy a subscription or even 2 subscriptions (1 USA and 1 Thai) then you get a 50% discount when you buy a Skype number for 12 months, which is a good deal.

  The application on your Galaxy will inform you of all the missed calls. I suggest you only install Skype on a PC too to see the full selection of purchase options in Tools/Options. You must configure the voicemail here and select this option to allow anyone to call your Skype number. Spend some time looking at all the options that are available to you.

  You can transfer your Skype CA number to a number of Thai, if you wish and have a subscription or a credit to pay for it.

  Perhaps start by installing Skype on your base premium Galaxy from the game store, sign in with your account and take a look at all the parameters available on the app. Setting most are in the app now except setting up voicemail that can be made on the program Skype on a PC.

• Refresh the library (adding missing albums)

  OK, I get that itunes is not automatically sweeping the "media folder location" during the files after the initial launch after installation. Even what is an automated scan, which scans all drives from what I understand (because no media file has been specified yet).

  Now, I added manually tons of albums in my media folder. These albums are subfolders album separated into separate artist folders in my media folder. I can't 'add to library', and then select all and press to enter. This opens the last artist folder in alphabetical order. I must therefore compare my library with my media folder and manually add all songs in the album missing files? It's just stupid. I could also reinstall itunes and rescan everything...

  There must be an easier way... is it?

  Sorry, but I'm very frustrated because this is a function of SIMPLE who always missed and is clearly not here to promote the purchase of songs via itunes only.

  Thanks in advance for the help.

  Anyone?

• missing element

  I TRY TO INSTALL ON MY NEW VISTA COMPUTER PIKACHU. HE SAID THAT THERE IS AN ELEMENT MISSING WINDOWS. IS THERE A WAY WE CAN DOWNLOAD THIS MISSING COMPONENT? I HAVE ANOTHER COMPUTER THAT HAS VISTA WHICH ALLOWS ME TO PLAY PIKACHU. IT IS A DELL AND I HAVE A VERY GOOD CARD TO PLAY IN THIS. MY MOTHER LOVES THIS GAME AND I WOULD REALLY LIKE TO GET IT INSTALLED ON HIS COMPUTER. Thank you!

  Try, right-click on the setup.exe and choose 'Run as administrator' and see if the problem still occurs.

• General question about the Browser element

  Will look for an alternative, I found the Browser element and now I have a few questions about that:

  As I am not yet experienced on the Interfaces of Java development, I was wondering if following senario is possible:

  Have some HTML Pages which do the job of the Interface.

  If you submit a form, the JAva Base program (the Master application) process all Information.

  If you are viewing a list, the info is from a json of the Base program output.

  As the Communication Server Client HTML, the only difference is, that all communications remains inside the app.

  Is this possible?

  I can't speak to the idea of dealing with the entry of html, but I can confirm that it is possible for an application program to create a html page and providing the BrowserField for display.

• Missing elements when the paper is published online

  I tried to publish a document online, and whenever I publish, some items are missing (decorative lines, logos, photos, etc.).  I tried all possible combinations of the parameters before publication but can't seem to solve the problem.  Help, please!

  I replaced the elements involved and republished and finally, they appeared.

• XSL Transform map failure during execution due to missing element Xpath

  Hello

  I have a case where I use a source variable which has two components. At run time, these variables can be non-existent depends on previous activities.

  The problem is the transformation XSL doesn't like it and fails with the error

  XPath expression cannot run.

  The XPath expression cannot run; the reason was: oracle.xml.parser.v2.XMLDOMException: import not allowed on nodes of type of document.

  Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  How can I ignore for the mapping of similar transformation to affect ignoreMissingFromData activity?

  Thank you.

  Hello

  > variable source that has two components. At run time, these variables can be non-existent

  Are you talking about BPEL variables or XML elements? Can send you a sample xml?

  In any case, I think you could use getContentAsString or something like that in your XLST and causing its failure... A workaround is to use xslt:if or xslt: choose test if the element is there...

  See you soon,.

  Vlad

• First partition 12 missing elements and sound effects

  I've recently updated the PRE 11 to 12 PRE.  I noticed immediately that I am missing components.  I don't have the same amount of (TRANSITIONS, TITLES & TEXT, EFFECTS, AND GRAPHICS).  If you look at PRE 11 to 12 MEADOW there is a huge difference in the number of options at my disposal.  In addition, the new 12 PRE boasts 50 musical scores and 250 sound effects.  This section is grayed out and there is nothing available to choose from.  I understand that you have to download, but there is nothing to choose, so I can't download them.  I uninstalled and reinstalled all my firewall and antivirus is disabled.  So I ran a software update.  Still nothing!  With PRE 12, looks like a stage spectacular return and before the 11.

  shawndpaul

  What operating system is running your 12 items first? Have you updated from 12 12.1 in an open Project Help Menu/set day?

  Now for the immediate question... First 12 elements content must match all purposes useful the first elements 11.

  Please check out my blog first elements 12 First Look (especially part 3 content) where I did a microscopic look at the differences between the 11 and 12.

  First Elements ATR troubleshooting: first items 12 first look details

  and surprises should be included in

  http://www.atr935.blogspot.com/2013/09/pe12-daily-discoveries.html

  Did you stay with Windows as it passed first items 11-12?

  Let us go through a list, see check if we can understand what is happening in your IT environment... for now, I will assume, Windows 7, 8 or 8.1 64bits.

  1. you are running a user with privileges account? In addition, applied run as directors to the program by clicking on the icon of the Office first 12 items and selecting run as administrator.

  2 How long have you waited for the content under the Audio tab is displayed. Many have observed that there is a delay between what seems to be the installation of the program and the appearance of sheet music and sound effects. Let the program open and give the time.

  3. I almost forgot a thought since you said that you worked with 11 already. But, I ask to make sure I don't take anything for granted.

  In the first 12 items you're looking for in the Expert workspace or workspace quick? If you work in the quick workspace, which may contribute to your problem.

  Please review and then we can decide what then. Not looking for a first elements 11 compared to question 12, rather a problem in your specific environment.

  RTA