About journal apply to standby

Similar Questions

• My computer acer laptop keeps closing after about 5 minutes in standby mode. Is it possible to fix this?

  My computer acer laptop keeps closing after about 5 minutes in standby mode.  Is it possible to fix this.

  Original title: power shutdpwn

  Hello

  Have you checked your power options?

  http://www.thewindowsclub.com/configure-power-plan-Windows-8

• Newspapers do not apply to Standby Database

  I'm scared, I'm back.
  
  I now a primary database and an expectation of database and logs are shipped but not applied. Did some research and I got to the point where in my alert log I find the following when I try to start MRP:
  Fri Jun 29 15:03:40 2012
  modify the recovery of database managed standby database disconnect from the session
  Try to start the standby recovery process thoroughly managed (SAPDS)
  Fri Jun 29 15:03:40 2012
  MRP0 started with pid = 29, OS id = 23272
  MRP0: Background Managed Standby recovery process started (SAPDS)
  has started the process of logmerger
  Fri Jun 29 15:03:45 2012
  Managed Standby recovery not using real time applies
  Reading file ' / var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf' header (fno 2) failed with ORA-01206
  Data file header 2 replay failed with ORA-01206
  MRP0: Background Media Recovery terminated with error 1110
  Errors in the /var/hpsrp/drforp03/oradata/u04/SAPDS/admin/diag/rdbms/drfsapds/SAPDS/trace/SAPDS_pr00_23308.trc file:
  ORA-01110: data file 2: ' / var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
  ORA-01122: database file 2 failed verification check
  ORA-01110: data file 2: ' / var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
  ORA-01206: the file is not part of this database - bad database id
  Recovery slave PR00 is previously released with the exception of 1110
  Errors in the /var/hpsrp/drforp03/oradata/u04/SAPDS/admin/diag/rdbms/drfsapds/SAPDS/trace/SAPDS_mrp0_23272.trc file:
  ORA-01110: data file 2: ' / var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
  ORA-01122: database file 2 failed verification check
  ORA-01110: data file 2: ' / var/hpsrp/drforp03/oradata/u04/SAPDS/DRFSAPDS/sysaux01.dbf'
  ORA-01206: the file is not part of this database - bad database id
  MRP0: Stopping the process background Media Recovery (SAPDS)
  Completed: change the recovery of database managed standby database disconnect from the session
  
  Therefore, my question is how can I get out of this and get my logs to apply pending?

  Hello again;

  Do you think if I tried to repeat the duplicate?

  Yes I think you should do this.

  Give me a few minutes and I'll review my Word document and provide here an overview step by step as insurance.

  I always clean the day before before trying another dup

  OVERVIEW

  Step 1 - password file FRO sleep - the primary copy and rename
  Step 2 - On the remote server Directory Structure - Make sure noting is missing
  Step 3 - Oracle Net Setup - entered for the CLONE in your TNSNAMES file. ORA on both servers
  Step 4 - Adding SID_LIST_LISTENER (guess named listener LISTENER)
  Step 5 - located in listener.ora and sqlnet.ora both servers wait times
  Step 6 - settings of the auxiliary Instance initialization file
  Step 7 - Set SID of the auxiliary Instance
  Step 8 - create a SPFILE to the new database using a file with the INIT parameters pfile
  Step 9 - shutdown and startup nomount on new Spfile (auxiliary Instance)
  Step 10 - Start RMAN and run the command DUPLICATE

  SID_LIST_LISTENER example of mine

  SID_LIST_LISTENER =
     (SID_LIST =
         (SID_DESC =
         (SID_NAME = PLSExtProc)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (PROGRAM = extproc)
       )
         (SID_DESC =
         (global_dbname = CLONE.hostname)
         (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
         (sid_name = CLONE)
     )
  )
  

  Avoid delays

  Add these to both servers
  
  To listener.ora
  INBOUND_CONNECT_TIMEOUT_ = 120
  
  To sqlnet.ora
  SQLNET.INBOUND_CONNECT_TIMEOUT = 120
  
  Then stop and start the listener.
  

  RMAN

  $ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby

  Connect should return something like this

  connected to target database: RECOVER9 (DBID=3806912436)
  connected to auxiliary database: CLONE (not mounted)
  

  RMAN > current database of target duplicate for the eve of the database NOFILENAMECHECK.

  INIT Extras

  In order to avoid the ORA-09925 do of course the PFILE core_dump_dest value and audit_file_dest a file

  Best regards

  mseberg

  Published by: mseberg on June 29, 2012 11:12

• How to move from Data Guard time really apply (restore) to archive the journal

  Hello
  
  Standby database configured with broker and application really remake in time; However, I want to change it to archive the journal apply mode without losing the broker configuration. Is this possible? If it is not possible to use the broker to make archive log apply, I can remove the broker and use Data Guard to set up the day before to use the archive log apply?
  
  Concerning

  Hello;

  Broker automatically allows real-time applies to databases on hold if the standby database has standby redo logs configured.

  Stop repeat applies

  DGMGRL> EDIT DATABASE 'PRIMARY' SET STATE='APPLY-OFF';
  

  Repeat restart applies broker

  DGMGRL> EDIT DATABASE 'PRIMARY' SET STATE='APPLY-ON';
  

  In order to get rid of standby redo logs would be a way. I would like to leave myself alone. Real time assistance to prevent the loss of data.

  Best regards

  mseberg

• How to recover missing the mounting point on the standby server

  Environment: Oracle 11.2.0.3 EE on Solaris

  
  

  I have a Production database with a physical standby created and run in our remote data center and this configuration worked well for several years.

  
  

  Recently, I had 2 two new mount points, added to the Production Server but unfortunately do not have their created on the standby server.  I did not remapped mounting points, so the layout is identical between the Production and standby.  At least it was.

  
  

  I created several new data files on the Production Server using the new mount points.

  
  

  Once I realized my mistake, I had additional mounting points created on the standby server.

  
  

  I STANDBY_FILE_MANAGEMENT = AUTO on the day before, but obviously the new data file was not created since mount points were not available when they were added in the Production.

  
  

  Without the mount points and therefore the new data files, on the eve, archive logs are not applied on the day before.  There are currently about 150 newspapers that must be applied.
  

  
  

  Question: Can I copy the files of existing data from the Production Server to the standby server and Data Guard will know which archives newspapers must be applied to standby data files to bring them current with the files of Production data?

  
  

  If this is not the case, how can I get the new data files created on the eve and a return to synchronization with the Production?

  
  

  Thanks a lot for your help!

  
  

  -gary

  Once the mount points are created on the eve, manually resume the managed recovery. The day before would have abandoned managed recovery so you don't have to make it work again. The transaction that has been reproduced that requires mount points should not proceed. Given enough time, the wait will catch up to where it should be. If it's not fast enough, then use RMAN to roll forward the day before as indicated in a previous answer.

  > Can I copy the existing data files on the Production Server to the standby server

  N ° you can not do this.

  See you soon,.
  Brian

• Error applying patch 7461070

  Dear Experts,

  I installed successfully R12.1.1 Oracle on windows 2003 32-bit.

  then I'm doing of consecutive installation tasks as directed by Installation of Oracle E-Business Suite and Notes version upgrade 12 (12.1.1) for Microsoft Windows Server (32 bit) (Doc ID 761567.1() .

  I am trying to install 7461070 as pre-requisit patches patch 8421008 (I do this patch according to the instruction of MOS).  I get this error like that, I don't know why? :

  adlibout: error: aitlang.obj not properly extracted from adst.lib

  adlibout: error: aitldf.obj not properly extracted from adst.lib

  adlibout: error: aitopt.obj not properly extracted from adst.lib

  adlibout: error: aitshp.obj not properly extracted from adst.lib

  adlibout: error: aitwrt.obj not properly extracted from adst.lib

  adlibout: error: aitz.obj not properly extracted from adst.lib

  adlibout: error: aiuarg.obj not properly extracted from adst.lib

  adlibout: error: aiucef.obj not properly extracted from adst.lib

  adlibout: error: aiucmd.obj not properly extracted from adst.lib

  adlibout: error: aiuext.obj not properly extracted from adst.lib

  adlibout: error: aiufil.obj not properly extracted from adst.lib

  adlibout: error: aiulog.obj not properly extracted from adst.lib

  adlibout: error: aiumem.obj not properly extracted from adst.lib

  adlibout: error: aiuoqg.obj not properly extracted from adst.lib

  adlibout: error: aiuora.obj not properly extracted from adst.lib

  adlibout: error: aiures.obj not properly extracted from adst.lib

  adlibout: error: aiusql.obj not properly extracted from adst.lib

  adlibout: error: aiustr.obj not properly extracted from adst.lib

  adlibout: error: aiustrg.obj not properly extracted from adst.lib

  adlibout: error: aiuval.obj not properly extracted from adst.lib

  adlibout: error: aiuver.obj not properly extracted from adst.lib

  adlibout: error: aiz.obj not properly extracted from adst.lib

  adlibout: error: dmecep.obj not properly extracted from adst.lib

  adlibout: error: dmeef.obj not properly extracted from adst.lib

  adlibout: error: dmesr.obj not properly extracted from adst.lib

  adlibout: error: dmmact.obj not properly extracted from adst.lib

  adlibout: error: dmmb.obj not properly extracted from adst.lib

  adlibout: error: dmmbi.obj not properly extracted from adst.lib

  adlibout: error: dmmcad.obj not properly extracted from adst.lib

  adlibout: error: dmmcep.obj not properly extracted from adst.lib

  adlibout: error: dmmcon.obj not properly extracted from adst.lib

  adlibout: error: dmmef.obj not properly extracted from adst.lib

  adlibout: error: dmmffk.obj not properly extracted from adst.lib

  adlibout: error: dmmmax.obj not properly extracted from adst.lib

  adlibout: error: dmmmis.obj not properly extracted from adst.lib

  adlibout: error: dmmnew.obj not properly extracted from adst.lib

  adlibout: error: dmmobs.obj not properly extracted from adst.lib

  adlibout: error: dmmold.obj not properly extracted from adst.lib

  adlibout: error: dmmp1.obj not properly extracted from adst.lib

  adlibout: error: dmmp2.obj not properly extracted from adst.lib

  adlibout: error: dmmsr.obj not properly extracted from adst.lib

  adlibout: error: dmmsrc.obj not properly extracted from adst.lib

  adlibout: error: dmmtar.obj not properly extracted from adst.lib

  adlibout: error: dmmuid.obj not properly extracted from adst.lib

  adlibout: error: dmucom.obj not properly extracted from adst.lib

  adlibout: error: dmud.obj not properly extracted from adst.lib

  adlibout: error: dmuef.obj not properly extracted from adst.lib

  adlibout: error: dmumn.obj not properly extracted from adst.lib

  adlibout: error: dmus.obj not properly extracted from adst.lib

  adlibout: error: dmusr.obj not properly extracted from adst.lib

  adlibout: error: dmutt.obj not properly extracted from adst.lib

  adlibout: error extracting files from adst.lib

  Save the batch file as c:/oracle/SCREWS/apps/apps_st/appl/admin/SCREWS/out/E_ad

  To extract object requested for announcement of product modules.

  End of session adlibout

  Time is Sun Jul 6 15:07:15 EDT 2014

  **********************************************************

  An error occurred during extraction of the library files.

  Continue as if it was successful [No.]:

  in the log file... anything let me know where is the problem:

  Here is the log file

  Start of session AutoPatch *.

  AutoPatch version: 12.0.0

  AutoPatch started at the: Sunday, July 6, 2014 15:06:11

  APPL_TOP is set to c:\oracle\VIS\apps\apps_st\appl

  The value of NLS_LANG environment is: American_America.AL32UTF8

  NLS_LANG value for utility AD run is: AMERICAN_AMERICA. AL32UTF8

  Backup restart files, as appropriate. Fact.

  Your previous session to autopatch did not stand up to the end.

  You want to continue your previous session to AutoPatch [Yes]? n

  You have chosen to ignore your previous session AutoPatch

  and restart the AutoPatch early.

  ------------------------------------------------------------------------

  If you partially applied a hotfix, you should continue with your

  AutoPatch previous session until it completes successfully.

  If you try to re - apply a patch you applied only partially,

  AutoPatch can apply the patch incorrectly.

  ------------------------------------------------------------------------

  Enter Yes to confirm that you want to replace your old

  AutoPatch session and start a new session of autopatch.

  Enter number to continue with your previous session AutoPatch. [No.]: y

  Please enter the batchsize [1000]: 1000

  Please enter the name of the Oracle Applications system what

  APPL_TOP belongs to.

  Application system name must be unique on all Oracle

  Applications of the systems at your site, must be between 1 and 30 characters

  for a long time, can only contain alphanumeric characters and underline characters.

  and must begin with a letter.

  Sample application system names: 'prod', 'test', 'demo' and

  "Development_2.

  Name of the system of applications [SCREW]: SCREW *.

  NOTE: If you do not currently have certain types of installed files

  in this APPL_TOP, you may not be able to perform certain tasks.

  Example 1: If you do not have the files used for installation or upgrade

  the database has been installed in this area, you can install or upgrade

  the database of this APPL_TOP.

  Example 2: If you do not have the form files installed in this area, you can't

  generate or run them from this APPL_TOP.

  Example 3: If you have not installed in this area, the simultaneous program files

  You cannot connect concurrent programs or generate reports of this APPL_TOP.

  You currently have files used for the installation or the upgrade of the database

  installed in this APPL_TOP [YES]? YES *.

  You currently have HTML and Java files to HTML-based features

  installed in this APPL_TOP [YES]? YES *.

  You currently have files installed Oracle Applications form

  in this APPL_TOP [YES]? YES *.

  You have now installed the simultaneous program files

  in this APPL_TOP [YES]? YES *.

  Please enter the name of Oracle Applications will use to identify this APPL_TOP.

  The name APPL_TOP you select must be unique within an Oracle Applications

  System, must be between 1 and 30 characters long, may contain only the

  alphanumeric and underscore characters and must start with a letter.

  APPL_TOP sample names: "prod_all", "demo3_forms2" and "forms1.

  APPL_TOP name [AT_fineebs02]: AT_fineebs02 *.

  You are about to apply a patch for the installation of the Oracle Applications

  in your database to ORACLE "SCREW".

  using ORACLE executables in

  'c:\oracle\VIS\apps\tech_st\10.1.2 '.

  This is the database correct [Yes]? Yes

  AutoPatch needs the password for your schema ORACLE 'SYSTEM '.

  to determine the configuration of your installation.

  Enter the password for your schema ORACLE 'SYSTEM ': *.

  Connecting to the SYSTEM... Successfully connected.

  The ORACLE username specified below for Application Object Library

  uniquely identifies your existing product group: APPLSYS

  Enter the password of ORACLE Application Object Library [APPS]: *.

  AutoPatch checks your name of user and password.

  Connecting to APPLSYS... Successfully connected.

  The status of the different features in this performance of the AutoPatch is:

  <-feature version in - >

  Function Active?   Flags of APPLTOP data model

  ------------------------------   -------   --------   -----------   -----------

  CHECKFILE Yes 1 1 O N N O N O

  PREREQ Yes 6 6 O N N O N O

  CONCURRENT_SESSIONS NO. 2 2 Y O N Y O N

  PATCH_TIMING Yes 2 2 O N N O N O

  PATCH_HIST_IN_DB Yes 6 6 O N N O N O

  SCHEMA_SWAP Yes 1 1 O N N Y Y Y

  JAVA_WORKER Yes 1 1 O N N O N O

  CODELEVEL Yes 1 1 O N N O N O

  Connecting to the SYSTEM... Successfully connected.

  Connecting to APPLSYS... Successfully connected.

  The current session identifier is 543211

  Product file information...

  Reading language information and territory of file...

  The language information of applUS.txt reading...

  AutoPatch WARNING:

  Product data file

  c:\oracle\VIS\apps\apps_st\appl\admin\zfaprod.txt

  There is no product "zfa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  c:\oracle\VIS\apps\apps_st\appl\admin\zsaprod.txt

  There is no product "zsa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  c:\oracle\VIS\apps\apps_st\appl\admin\jtsprod.txt

  There is no product "jts".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Reading of data to see what the industry is currently installed.

  Read FND_LANGUAGES to see what is currently installed.

  Currently, the following is installed:

  Status of language code

  ----   --------------------------------------- ---------

  American base of American English

  Your base will be AMERICAN.

  Set up the module information.

  Reading database for more information on the modules.

  Saving the module information.

  Reading database for more information on the products.

  Connecting to the SYSTEM... Successfully connected.

  Connecting to APPLSYS... Successfully connected.

  Connecting to the SYSTEM... Successfully connected.

  Database of reading to find out how the products depend on each other.

  Connecting to APPLSYS... Successfully connected.

  Reading topfile.txt...

  Registration of the product information.

  Connecting to the SYSTEM... Successfully connected.

  Connecting to APPLSYS... Successfully connected.

  AD code level: [B.1]

  You chose to abandon your previous session to autopatch

  and to continue under a new session.

  Cleaning up the previous session database...

  Complete the cleaning of data base for the previous session.

  STRT_TASK: [AutoPatch startup after software] [] [Sunday, July 6, 2014 15:06:26]

  Connecting to applications... Successfully connected.

  STRT_TASK: [password validate schema] [] [Sunday, July 6, 2014 15:06:26]

  Connecting to APPLSYS... Successfully connected.

  Connecting to applications... Successfully connected.

  STOP_TASK: [password validate schema] [] [Sunday, July 6, 2014 15:06:26]

  STRT_TASK: [history of Patch Upload information filesystem] [] [Sunday, July 6, 2014 15:06:26]

  Try to get a lock...

  About to attempt of instantiation of the snapshot of the current view: Sunday, July 6, 2014 15:06:27

  Attempt to instantiate the snapshot current view...

  Was already instantiated. If no instantiation made this time.

  Trying to instantiate the snapshot of the current view: Sunday, July 6, 2014 15:06:27

  S T E R T O F U P L O A D *.

  Start date: Sunday, July 6, 2014 15:06:27

  0 "left on" files uploaded to DB javaupdates.txt: Sunday, July 6, 2014 15:06:27

  0 patches downloaded from the history of patch ADPSV format files: Sunday, July 6, 2014 15:06:27

  Download information on files copied during previous tests...

  Downloading "c:\oracle\VIS\apps\apps_st\appl\admin\VIS\out\filescopied_543205.txt"...

  Start instant processing of information

  AutoPatch error:

  Could not download 'filescopied_543205.txt' to update the current view of the snapshot.

  Downloading "c:\oracle\VIS\apps\apps_st\appl\admin\VIS\out\filescopied_543206.txt"...

  Start instant processing of information

  AutoPatch error:

  Could not download 'filescopied_543206.txt' to update the current view of the snapshot.

  0 "left on" filescopied_ < session_id > .txt files uploaded to DB: Sunday, July 6, 2014 15:06:27

  ****************** E N D   O F   U P L O A D ******************

  End date: Sunday, July 6, 2014 15:06:27

  STOP_TASK: [history of Patch Upload information filesystem] [] [Sunday, July 6, 2014 15:06:27]

  Enter the directory where your Oracle Applications patch has been unloaded

  The default directory is [C:\oracle\VIS\apps\apps_st\appl]: C:\patches\7461070

  STOP_TASK: [AutoPatch startup after software] [] [Sunday, July 6, 2014 15:06:51]

  Please enter your AutoPatch driver file name: u7461070.drv

  STRT_TASK: [execute a driver file single patch] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [steps before the part of copy] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [pilot Initial processing steps] [] [Sunday, July 6, 2014 15:07:01]

  For the driver file is the start time: Sunday, July 6, 2014 15:07:01

  STOP_TASK: [pilot Initial processing steps] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [get Oracle Applications release and read the driver file] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [Get Oracle Applications version] [] [Sunday, July 6, 2014 15:07:01]

  Getting Oracle Applications version...

  Connecting to APPLSYS... Successfully connected.

  Current version is 12.1.1

  Connecting to applications... Successfully connected.

  STOP_TASK: [Get Oracle Applications version] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [driver file process patch] [] [Sunday, July 6, 2014 15:07:01]

  Reading patch driver folder...

  STRT_TASK: [parse and load the driver patch file] [] [Sunday, July 6, 2014 15:07:01]

  Analysis and fix the driver file loading...

  6728 rows processed.

  STOP_TASK: [parse and load the driver patch file] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [check the integrity of patch] [] [Sunday, July 6, 2014 15:07:01]

  Do not check integrity patch as an indicator of integrity checking is disabled.

  STOP_TASK: [check the integrity of patch] [] [Sunday, July 6, 2014 15:07:01]

  Reading patch file of the driver.

  STOP_TASK: [driver file process patch] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [other driver and the logic output-based] [] [Sunday, July 6, 2014 15:07:01]

  Determine the version target...

  The current version of target is 12.1.1

  STOP_TASK: [other driver and the logic output-based] [] [Sunday, July 6, 2014 15:07:01]

  STOP_TASK: [get Oracle Applications release and read the driver file] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [Prereq logic check] [] [Sunday, July 6, 2014 15:07:01]

  For the current view:

  l_appl_top_id... 1044

  l_eav_patch_release_name... 12.0.0

  Current view - 7461070:US's NOT_APPLIED

  STOP_TASK: [Prereq logic check] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [patch question Ask translated] [] [Sunday, July 6, 2014 15:07:01]

  STOP_TASK: [patch question Ask translated] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [determine bugs apply] [] [Sunday, July 6, 2014 15:07:01]

  Determine which patches to apply...

  Disable bugfixes for installed or shared products in the database...

  Reset actions for bug bug fixes we will not...

  Processing of files for the Applications Oracle Government...

  Done to determine what patches to apply.

  Journal and news file synchronization point:

  Sunday, July 6, 2014 15:07:01

  Deactivation of the actions that make reference to unrecognized products.

  Journal and news file synchronization point:

  Sunday, July 6, 2014 15:07:01

  End of unrecognized product verification.

  STOP_TASK: [determine bugs apply] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: process action [Options] [] [Sunday, July 6, 2014 15:07:01]

  STOP_TASK: process action [Options] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: Edit actions for "bootstrap" mode] [] [Sunday, July 6, 2014 15:07:01]

  STOP_TASK: Edit actions for "bootstrap" mode] [] [Sunday, July 6, 2014 15:07:01]

  STRT_TASK: [Ask for the number of parallel workers] [] [Sunday, July 6, 2014 15:07:01]

  Utilities of the AD can support a maximum of 999 workers. Your

  current database configuration supports a maximum of 83 workers.

  Oracle recommends to use between 2 and 4 workers.

  Enter the number of parallel workers [2]: 2

  STOP_TASK: [Ask for the number of parallel workers] [] [Sunday, July 6, 2014 15:07:10]

  AutoPatch will run in parallel mode.

  STOP_TASK: [steps before the part of copy] [] [Sunday, July 6, 2014 15:07:10]

  STRT_TASK: [Not part of copy] [] [Sunday, July 6, 2014 15:07:10]

  STRT_TASK: [applied the new applterr.txt] [] [Sunday, July 6, 2014 15:07:10]

  * Disable all the actions of applterr.txt.

  Version check:

  C:\patches\7461070\admin\applterr.txt

  version is less than or equal to

  c:\oracle\VIS\apps\apps_st\appl\admin\applterr.txt.

  File will be copied to destination.

  Didn't need to apply new applterr.txt.

  STOP_TASK: [applied the new applterr.txt] [] [Sunday, July 6, 2014 15:07:10]

  STRT_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Sunday, July 6, 2014 15:07:10]

  Application (if any) new applprod.txt...

  * Disable all the actions of applUS.txt.

  * Disable all the actions of applprod.txt.

  Version check:

  C:\patches\7461070\admin\applprod.tmp

  version is greater than or equal to

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\applprod.tmp.

  File will be copied to destination.

  Version check:

  C:\patches\7461070\admin\applUS.tmp

  version is greater than or equal to

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\applUS.tmp.

  File will be copied to destination.

  "US7ASCII" character set is a subset of the character "AL32UTF8.

  No character set conversion is required.

  AutoPatch WARNING:

  Delete the old backup file

  C:\patches\7461070\backup\VIS\AT_fineebs02\admin\VIS\applprod.tmp.

  Backup

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\applprod.tmp

  TO

  C:\patches\7461070\backup\VIS\AT_fineebs02\admin\VIS\applprod.tmp.

  Copy of the file

  C:\patches\7461070\admin\applprod.tmp

  TO

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\applprod.tmp.

  "US7ASCII" character set is a subset of the character "AL32UTF8.

  No character set conversion is required.

  AutoPatch WARNING:

  Delete the old backup file

  C:\patches\7461070\backup\VIS\AT_fineebs02\admin\VIS\applUS.tmp.

  Backup

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\applUS.tmp

  TO

  C:\patches\7461070\backup\VIS\AT_fineebs02\admin\VIS\applUS.tmp.

  Copy of the file

  C:\patches\7461070\admin\applUS.tmp

  TO

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\applUS.tmp.

  #

  Validation of the PDI for existing products...

  #

  Validation of IDPS (OID = 0) for the product 'fnd '...

  Connecting to the SYSTEM... Successfully connected.

  Validation of IDPS (OID = 0) for the product ' to the '...

  Validation of IDPS (OID = 0) for the product 'ad '...

  Validation of IDPS (OID = 0) for the product "alr"...

  Validation of IDPS (OID = 600) for product 'ax '...

  Validation of IDPS (OID = 601) product 'ak '...

  Validation of IDPS (OID = 602) produced "xla"...

  Validation of IDPS (OID = 103) product 'gl '...

  Validation of IDPS (OID = 168) product 'rg '...

  Validation of IDPS (OID = 140) product 'fa '...

  Validation of IDPS (OID = 800) for products 'by '...

  Validation of IDPS (OID = 800) product 'salary '...

  Validation of IDPS (OID = 800) product 'ff '...

  Validation of IDPS (OID = 800) product 'dt '...

  Validation of IDPS (OID = 804) product 'ssp '...

  Validation of IDPS (OID = 805) produced "ben"...

  Validation of IDPS (OID = 808) produced "hxt '...

  Validation of IDPS (OID = 810) product 'ota '...

  Validation of IDPS (OID = 250) for product 'qa '...

  Validation of IDPS (OID = 178) produced "icx"...

  Validation of IDPS (OID = 190) for the product 'az '...

  Validation of IDPS (OID = 191) product 'bis '...

  Validation of IDPS (OID = 240) for product 'pn '...

  Validation of IDPS (OID = 800) produced "ghr"...

  Validation of IDPS (OID = 800) produced "pqh '...

  Validation of IDPS (OID = 800) product 'PPC '...

  Validation of IDPS (OID = 809) produced "hxc"...

  Validation of IDPS (OID = 662) product 'rlm '...

  Validation of IDPS (OID = 663) for the product 'Eva '...

  Validation of IDPS (OID = 298) product 'pom '...

  Validation of IDPS (OID = 265) product 'frm '...

  Validation of IDPS (OID = 271) for the product 'bsc '...

  Validation of IDPS (OID = 274) product 'MEF '...

  Validation of IDPS (OID = 0) for the product "leaves"...

  Validation of IDPS (OID = 426) product 'eam '...

  Validation of IDPS (OID = 716) for the product "FTE"...

  Validation of IDPS (OID = 8400) product 'igi '...

  Validation of IDPS (OID = 230) produced "itg"...

  Validation of IDPS (OID = 726) product 'msr '...

  Validation of IDPS (OID = 455) product 'eni '...

  Validation of IDPS (OID = 879) product 'BMI '...

  Validation of IDPS (OID = 231) product "bne"...

  Validation of IDPS (OID = 186) product 'qrm '...

  Validation of IDPS (OID = 396) product 'pon '...

  Validation of IDPS (OID = 883) produced "csm"...

  Validation of IDPS (OID = 432) product 'dom '...

  Validation of IDPS (OID = 431) for product 'ego '...

  Validation of IDPS (OID = 430) product 'ddd '...

  Validation of IDPS (OID = 1292) produced "MEP"...

  Validation of IDPS (OID = 701) for the product "cln"...

  Validation of IDPS (OID = 709) for the product "BDU"...

  Validation of IDPS (OID = 242) product 'amw '...

  Validation of IDPS (OID = 204) produced "xle"...

  Validation of IDPS (OID = 390) product 'STD '...

  Validation of IDPS (OID = 435) for the product 'fun '...

  Validation of IDPS (OID = 266) product 'SCM '...

  Validation of IDPS (OID = 603) product 'OPE '...

  Validation of IDPS (OID = 235) product 'zx '...

  Validation of IDPS (OID = 206) product "lns"...

  Validation of IDPS (OID = 205) for the product 'ia '...

  Validation of IDPS (OID = 440) produced "fpa"...

  Validation of IDPS (OID = 210) product 'zpb "...

  Validation of IDPS (OID = 778) produced "jmf"...

  Validation of IDPS (OID = 438) product 'ita '...

  Validation of IDPS (OID = 508) product 'ftp'...

  Validation of IDPS (OID = 507) product 'pft '...

  Validation of IDPS (OID = 800) product 'soul '...

  Validation of IDPS (OID = 800) produced "irc"...

  Validation of IDPS (OID = 560) produced 'GM '...

  Validation of IDPS (OID = 429) for the product "DNA"...

  Validation of IDPS (OID = 207) product "ipm"...

  Validation of IDPS (OID = 278) produces 'izu '...

  Validation of IDPS (OID = 718) produced "RR"...

  Validation of IDPS (OID = 9001) for the product "mth"...

  Validation of IDPS (OID = 667) for product "qpr"...

  Validation of IDPS (OID = 9003) product 'ddr '...

  Validation of IDPS (OID = 9004) produced "inl"...

  Validation of IDPS (OID = 200) for products 'ap '...

  Validation of IDPS (OID = 222) product 'ar '...

  Validation of IDPS (OID = 300) for the product 'oe '...

  Validation of IDPS (OID = 279) for products 'Sub '...

  Validation of IDPS (OID = 275) product 'pa '...

  Validation of IDPS (OID = 283) product 'cn '...

  Validation of IDPS (OID = 700) for the product 'mfg '...

  Validation of IDPS (OID = 401) product 'inv '...

  Validation of IDPS (OID = 201) produced "po '...

  Validation of IDPS (OID = 201) product 'IVT '...

  Validation of IDPS (OID = 702) for the product 'BOM '...

  Validation of IDPS (OID = 703) product 'eng '...

  Validation of IDPS (OID = 704) produced "mrp"...

  Validation of IDPS (OID = 705) for the product 'crp '...

  Validation of IDPS (OID = 706) product 'wip '...

  Validation of IDPS (OID = 708) for the product 'cz '...

  Validation of IDPS (OID = 712) produced "pjm"...

  Validation of IDPS (OID = 714) produced "flm"...

  Validation of IDPS (OID = 724) produced "msc"...

  Validation of IDPS (OID = 185) product 'xtr '...

  Validation of IDPS (OID = 170) for the product 'cs '...

  Validation of IDPS (OID = 260) for products 'this '...

  Validation of IDPS (OID = 175) product 'ec '...

  Validation of IDPS (OID = 7003) product 'jg '...

  Validation of product (OID = 7003) IDPS 'I '...

  Validation of IDPS (OID = 7000) product 'ja '...

  Validation of IDPS (OID = 7004) product 'jl '...

  Validation of IDPS (OID = 550) product 'gma '...

  Validation of IDPS (OID = 552) produced "gmd"...

  Validation of IDPS (OID = 553) product 'gme '...

  Validation of IDPS (OID = 555) produced "gmf"...

  Validation of IDPS (OID = 551) for the product "gmi"...

  Validation of IDPS (OID = 556) produced "gml"...

  Validation of IDPS (OID = 554) product 'gmp '...

  Validation of IDPS (OID = 557) for the product 'gr '...

  Validation of IDPS (OID = 558) for the product 'pmi '...

  Validation of IDPS (OID = 8727) produced "cus"...

  Validation of IDPS (OID = 8722) product 'cui '...

  Validation of product (OID = 8723) IDPS 'cut '...

  Validation of IDPS (OID = 690) produced "jtf"...

  Validation of IDPS (OID = 677) produced "bix"...

  Validation of IDPS (OID = 539) product 'ieo.

  Validation of IDPS (OID = 510) product 'okc '...

  Validation of IDPS (OID = 515) produced "oks"...

  Validation of IDPS (OID = 511) for product 'SCC '...

  Validation of IDPS (OID = 518) produced "bic"...

  Validation of IDPS (OID = 512) for product 'CSD '...

  Validation of IDPS (OID = 522) produced "asf"...

  Validation of IDPS (OID = 513) product 'csf '...

  Validation of IDPS (OID = 530) for the product 'ams '...

  Validation of IDPS (OID = 520) produced "amv"...

  Validation of IDPS (OID = 517) product 'bim '...

  Validation of IDPS (OID = 534) product 'xnp '...

  Validation of IDPS (OID = 535) produced "xdp"...

  Validation of IDPS (OID = 676) produced "bil"...

  Validation of IDPS (OID = 519) product 'ies '...

  Validation of IDPS (OID = 521) for product 'ast '...

  Validation of IDPS (OID = 172) for the product 'TDC '...

  Validation of IDPS (OID = 674) product 'PAI '...

  Validation of IDPS (OID = 673) produced "abdellah"...

  Validation of product (OID = 671) IDPS 'IBE '...

  Validation of IDPS (OID = 672) product 'ibu '...

  Validation of IDPS (OID = 450) produced "IFI"...

  Validation of IDPS (OID = 453) produced "hri"...

  Validation of IDPS (OID = 454) for product 'SAIs '...

  Validation of IDPS (OID = 451) product 'opi '...

  Validation of IDPS (OID = 452) product 'poa '...

  Validation of IDPS (OID = 723) product 'mso '...

  Validation of PDI (OID = 660) product 'have '...

  Validation of IDPS (OID = 661) product "PS"...

  Validation of IDPS (OID = 665) produced "wsh"...

  Validation of IDPS (OID = 722) product 'msd '...

  Validation of IDPS (OID = 385) produced "wms"...

  Validation of IDPS (OID = 388) produced "wps"...

  Validation of IDPS (OID = 8724) produced "cuf...

  Validation of IDPS (OID = 8731) produced "HPI"...

  Validation of IDPS (OID = 8721) product 'ipa '...

  Validation of IDPS (OID = 689) for the product "asg"...

  Validation of IDPS (OID = 695) produced "iex"...

  Validation of IDPS (OID = 524) produced "okx '...

  Validation of IDPS (OID = 697) produced "aso"...

  Validation of IDPS (OID = 523) produced "csp"...

  Validation of IDPS (OID = 682) for product "ozf '...

  Validation of IDPS (OID = 696) product 'God '...

  Validation of IDPS (OID = 680) produced "iem"...

  Validation of IDPS (OID = 777) for the product 'oke '...

  Validation of IDPS (OID = 174) product 'ecx '...

  Validation of IDPS (OID = 8402) product 'gms '...

  Validation of IDPS (OID = 8404) product 'igw '...

  Validation of IDPS (OID = 8401) product 'psb '...

  Validation of IDPS (OID = 8403) product "psp"...

  Validation of IDPS (OID = 177) product 'pos '...

  Validation of IDPS (OID = 698) for the product 'csr '...

  Validation of IDPS (OID = 699) for product 'Deal '...

  Validation of IDPS (OID = 8406) produced "igf"...

  Validation of IDPS (OID = 8405) product 'IA '...

  Validation of IDPS (OID = 410) product 'wsm '...

  Validation of IDPS (OID = 405) produced "mwa"...

  Validation of IDPS (OID = 8901) product 'fv '...

  Validation of IDPS (OID = 8407) product 'IGC '...

  Validation of IDPS (OID = 8450) for the product 'psa '...

  Validation of IDPS (OID = 691) product 'pv '...

  Validation of IDPS (OID = 544) product 'asl '...

  Validation of IDPS (OID = 869) produced "asp"...

  Validation of IDPS (OID = 862) produced "biv"...

  Validation of IDPS (OID = 542) produces "csi"...

  Validation of IDPS (OID = 868) produced "csl"...

  Validation of IDPS (OID = 866) product 'CUGs '...

  Validation of IDPS (OID = 870) product 'oki '...

  Validation of IDPS (OID = 545) product 'iec '...

  Validation of IDPS (OID = 873) product 'CSE '...

  Validation of IDPS (OID = 874) produced "jtm"...

  Validation of IDPS (OID = 867) product 'lah '...

  Validation of IDPS (OID = 540) for product "okl"...

  Validation of IDPS (OID = 549) produced "IBCS"...

  Validation of IDPS (OID = 880) produced "qot '...

  Validation of IDPS (OID = 881) product 'xnb '...

  Validation of IDPS (OID = 694) product 'PRI '...

  Validation of IDPS (OID = 280) product 'crash '...

  Validation of IDPS (OID = 666) for product "ibw '...

  Validation of IDPS (OID = 9000) produced "dpp"...

  #

  Audit of existing products for the minimum set of required files...

  #

  Checking files for product 'fnd '...

  Checking files for product ' to the '...

  Checking files for product 'ad '...

  Checking files for product "alr"...

  Checking files for product 'ax '...

  Checking files for product 'ak '...

  Checking files produced "xla"...

  Checking files for product 'gl '...

  Checking files for product 'rg '...

  Checking files for product 'ap '...

  Checking files for product 'fa '...

  Checking files for product 'ar '...

  Checking files for product 'oe '...

  Checking files for product "like"...

  Checking files for product 'pa '...

  Checking files for product "cn"...

  Checking files for product 'by '...

  Checking files for product 'salary '...

  Checking files for product 'ff '...

  Checking files for product 'dt '...

  Checking files for product 'ssp '...

  Checking files for product "ben"...

  Checking files for product "hxt '...

  Checking files for product 'ota '...

  Checking files for product 'mfg '...

  Checking files for product 'inv '...

  Checking files for product "po '...

  Checking files for product 'IVT '...

  Checking files for product 'BOM '...

  Checking files for product 'eng '...

  Checking files produced "mrp"...

  Checking files for product 'PRC '...

  Checking files for product 'wip '...

  Checking files for product 'cz '...

  Checking files for product "pjm"...

  Checking files for product "flm"...

  Checking files for product "msc"...

  Checking files for product 'xtr '...

  Checking files for product 'qa '...

  Checking files for product 'cs '...

  Checking files for product "this"...

  Checking files for product 'ec '...

  Checking files for product "icx"...

  Checking files for product 'az '...

  Checking files for product 'bis '...

  Checking files for product 'pn '...

  Checking files for product 'jg '...

  Checking files for product 'I '...

  Checking files for product 'ja '...

  Checking files for product 'jl '...

  Checking files for product "ghr"...

  Checking files for product 'gma '...

  Checking files for product "gmd"...

  Checking files for product "gme"...

  Checking files for product "gmf"...

  Checking files for product "gmi"...

  Checking files for product "gml"...

  Checking files for product 'gmp '...

  Checking files for product 'gr '...

  Checking files for product 'pmi '...

  Checking files for product "cus"...

  Checking files for product 'cui '...

  Checking files for product 'cut '...

  Checking files for product "jtf"...

  Checking files for product "bix"...

  Checking files for product 'ieo.

  Checking files for product 'okc '...

  Checking files for product "oks"...

  Checking files for product 'SCC '...

  Checking files for product "bic"...

  Checking files for product 'CSD '...

  Checking files for product "asf"...

  Checking files for product 'csf '...

  Checking files for product 'ams '...

  Checking files for product "amv"...

  Checking files for product 'bim '...

  Checking files for product 'xnp '...

  Checking files for product "xdp"...

  Checking files for product "bil"...

  Checking files for product 'ies '...

  Checking files for product 'ast '...

  Checking files for product 'TDC '...

  Checking files for product 'PAI '...

  Checking files for product "abdellah"...

  Checking files for product 'IBE '...

  Checking files for product 'ibu '...

  Checking files for product "IFI"...

  Checking files for product "hri"...

  Checking files for product 'SAIs '...

  Checking files for product "IPO"...

  Checking files for product 'poa '...

  Checking files for product "pqh '...

  Checking files for product 'PPC '...

  Checking files for product "hxc"...

  Checking files for product 'mso '...

  Checking files for product 'have '...

  Checking files for product "PS"...

  Checking files for product 'rlm '...

  Checking files for product 'Eva '...

  Checking files for product "wsh"...

  Checking files for product 'msd '...

  Checking files produced "wms"...

  Checking files for product "wps"...

  Checking files for product "cuf...

  Checking files for product "HPI"...

  Checking files for product 'ipa '...

  Checking files for product "asg"...

  Checking files for product "iex"...

  Checking files for product "okx '...

  Checking files for product "aso"...

  Checking files for product 'csp '...

  Checking files for product "ozf '...

  Checking files for product 'God '...

  Checking files for product "iem"...

  Checking files for product 'oke '...

  Checking files for product 'ecx '...

  Checking files for product 'gms '...

  Checking files for product 'igw '...

  Checking files for product 'psb '...

  Checking files for product "psp"...

  Checking files for product 'pom '...

  Checking files for product "pos"...

  Checking files for product "rea...

  Checking files for product 'Deal '...

  Checking files for product "igf"...

  Checking files produced "igs"...

  Checking files produced 'frm '...

  Checking files for product 'wsm '...

  Checking files for product 'bsc '...

  Checking files for product "MEF..."

  Checking files for product "mwa"...

  Checking files for product 'fv '...

  Checking files for product 'IGC '...

  Checking files for product 'psa '...

  Checking files for product 'sht '...

  Checking files for product 'pv '...

  Checking files for product 'asl '...

  Checking files for product "eam"...

  Checking files for product "FTE"...

  Checking files for product 'igi '...

  Checking files for product "itg"...

  Checking files for product "msr"...

  Checking files for product 'eni '...

  Checking files for product "asp"...

  Checking files for product "biv"...

  Checking files for product 'csi '...

  Checking files for product "csl"...

  Checking files produced "cug"...

  Checking files for product 'oki '...

  Checking files for product "IRC"...

  Checking files for product 'CSE '...

  Checking files for product "jtm"...

  Checking files for product 'lah '...

  Checking files for product 'BMI '...

  Checking files for product "bne"...

  Checking files produced "qrm"...

  Checking files for product 'pon '...

  Checking files for product "okl"...

  Checking files for product "IBCS"...

  Checking files produced "qot '...

  Checking files for product "csm"...

  Checking files for product 'dom '...

  Checking files for product 'ego '...

  Checking files for product 'ddd '...

  Checking files produced "MEP"...

  Checking files for product 'xnb '...

  Checking files for product "cln"...

  Checking files for product "BDU"...

  Checking files for product 'PRI '...

  Checking files for product "amw"...

  Checking files for product "xle"...

  Checking files for product 'crash '...

  Checking files for product 'STD '...

  Checking files for product 'fun '...

  Checking files for product 'gcs '...

  Checking files for product 'OPE '...

  Checking files for product 'zx '...

  Checking files for product "lns"...

  Checking files for product 'ia '...

  Checking files for product "fpa"...

  Checking files for product "zpb"...

  Checking files for product "jmf"...

  Checking files for product 'ita '...

  Checking files for product 'ftp '...

  Checking files produced 'pft '...

  Checking files for product 'soul '...

  Checking files for product "irc"...

  Checking files for product "ibw '...

  Checking files for product 'GMO '...

  Checking files for product "DNA"...

  Checking files for product "ipm"...

  Checking files for product "izu '...

  Checking files for product "RR"...

  Checking files for product "dpp"...

  Checking files for product "mth"...

  Checking files produced "qpr"...

  Checking files for product 'ddr '...

  Checking files for product "inl"...

  #

  Loading information of the new applprod.txt...

  #

  Product file information...

  Product file information...

  Validation of the dependency between product information...

  Re-organization of the information product lists...

  #

  New Applprod.txt validated successfully.

  #

  #

  No new products included in the new applprod.txt

  #

  Enforces new applprod.txt.

  Connecting to applications... Successfully connected.

  STOP_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Sunday, July 6, 2014 15:07:10]

  STRT_TASK: [Version searching for driver files] [] [Sunday, July 6, 2014 15:07:10]

  Performing the check of the version driver files...

  Journal and news file synchronization point:

  Sunday, July 6, 2014 15:07:10

  AutoPatch found some files that will not apply.

  These files are listed in the file information AutoPatch message.

  STOP_TASK: [Version searching for driver files] [] [Sunday, July 6, 2014 15:07:11]

  STRT_TASK: [copy driver files] [] [Sunday, July 6, 2014 15:07:11]

  Copying driver files in the installation area.

  No driver files have been selected for copying.

  STOP_TASK: [copy driver files] [] [Sunday, July 6, 2014 15:07:11]

  STRT_TASK: [driver files Forcecopy] [] [Sunday, July 6, 2014 15:07:11]

  To jump...

  ForceCopy of the driver in the installation area files driver specific

  Since no action is present for this driver file

  STOP_TASK: [driver files Forcecopy] [] [Sunday, July 6, 2014 15:07:11]

  STRT_TASK: [screen invalid files for this configuration] [] [Sunday, July 6, 2014 15:07:11]

  Projection invalid files for this installation...

  STOP_TASK: [screen invalid files for this configuration] [] [Sunday, July 6, 2014 15:07:11]

  STRT_TASK: [read the file driver files for a list of valid files] [] [Sunday, July 6, 2014 15:07:11]

  Determine the valid site files...

  Setting JAVA_TOP to 'c:\oracle\VIS\apps\apps_st\comn\java\classes '.

  STOP_TASK: [read the file driver files for a list of valid files] [] [Sunday, July 6, 2014 15:07:12]

  STRT_TASK: [libout Perform actions] [] [Sunday, July 6, 2014 15:07:12]

  Retrieving the object libraries of product modules...

  An error occurred during extraction of the library files.

  Continue as if it was successful [No.]: No.

  Release includes the hash table

  Release fixes hash table

  Releasing entities hash table

  You must check the file

  c:\oracle\VIS\apps\apps_st\appl\admin\VIS\log\7461070.log

  to find errors.

  I am using Cygwin.

  Kind regards

  Ahmad

  Solved

  AR-order has not been installed in the dir cygwin folder, I just installed the binutils package and rerun adpatch.

• An error occurred during rebinding of application program after applying the patch patch p9239090

  Dear experts,

  I put my installation Oracle of R12.1.1 to R12.1.3 level.

  I made a request patch 9239089 successfully, but system showed me an error after the application of patch p9239090 . (An error occurred during re-Association of the application programs. ) )

  The log file is

  Start of session AutoPatch *.

  AutoPatch version: 12.0.0

  AutoPatch started: Tuesday, June 17, 2014 06:34:34

  APPL_TOP is defined on/u01/applr12/apps/apps_st/appl

  The value of NLS_LANG environment is: American_America.US7ASCII

  NLS_LANG value for utility AD run is: AMERICAN_AMERICA. US7ASCII

  Backup restart files, as appropriate. Fact.

  Your previous session to autopatch did not stand up to the end.

  You want to continue your previous session to AutoPatch [Yes]? There

  You are about to apply a patch for the installation of the Oracle Applications

  in your ORACLE database "PROD".

  using ORACLE executable files in ' / u01/applr12/apps/tech_st/10.1.2'.

  This is the database correct [Yes]? Yes

  Connecting to the SYSTEM... Successfully connected.

  Already asked the ORACLE username and password

  Application Object Library.

  (The name of user and password given was: APPLSYS / *)

  Connecting to APPLSYS... Successfully connected.

  The status of the different features in this performance of the AutoPatch is:

  <-feature version in - >

  Function Active?   Flags of APPLTOP data model

  ------------------------------   -------   --------   -----------   -----------

  CHECKFILE Yes 1 1 O N N O N O

  PREREQ Yes 6 6 O N N O N O

  CONCURRENT_SESSIONS NO. 2 2 Y O N Y O N

  PATCH_TIMING Yes 2 2 O N N O N O

  PATCH_HIST_IN_DB Yes 6 6 O N N O N O

  SCHEMA_SWAP Yes 1 1 O N N Y Y Y

  JAVA_WORKER Yes 1 1 O N N O N O

  CODELEVEL Yes 1 1 O N N O N O

  Product file information...

  Reading language information and territory of file...

  The language information of applUS.txt reading...

  AutoPatch WARNING:

  Product data file

  /U01/applr12/apps/apps_st/appl/Admin/zfaprod.txt

  There is no product "zfa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/applr12/apps/apps_st/appl/Admin/zsaprod.txt

  There is no product "zsa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/applr12/apps/apps_st/appl/Admin/jtsprod.txt

  There is no product "jts".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Currently, the following is installed:

  Status of language code

  ----   --------------------------------------- ---------

  American base of American English

  Your base will be AMERICAN.

  Set up the module information.

  Reading database for more information on the modules.

  Saving the module information.

  Connecting to the SYSTEM... Successfully connected.

  Connecting to APPLSYS... Successfully connected.

  AD code level: [B.3]

  STRT_TASK: [AutoPatch startup after software] [] [Tuesday, June 17, 2014 06:34:49]

  Connecting to applications... Successfully connected.

  STRT_TASK: [password validate schema] [] [Tuesday, June 17, 2014 06:34:49]

  STOP_TASK: [password validate schema] [] [Tuesday, June 17, 2014 06:34:49]

  STRT_TASK: [history of Patch Upload information filesystem] [] [Tuesday, June 17, 2014 06:34:49]

  Try to get a lock...

  About to attempt of instantiation of the snapshot of the current view: Tuesday, June 17, 2014 06:34:50

  Attempt to instantiate the snapshot current view...

  Was already instantiated. If no instantiation made this time.

  Trying to instantiate the snapshot of the current view: Tuesday, June 17, 2014 06:34:50

  S T E R T O F U P L O A D *.

  Start date: Tuesday, June 17, 2014 06:34:50

  0 "left on" files uploaded to DB javaupdates.txt: Tuesday, June 17, 2014 06:34:50

  0 patches downloaded from the history of patch ADPSV format files: Tuesday, June 17, 2014 06:34:50

  Download information on files copied during previous tests...

  Download ' / u01/applr12/apps/apps_st/appl/admin/PROD/out/filescopied_15760.txt '...

  Start instant processing of information

  No records processed = 5012

  Collecting statistics for the table 'AD_CHECK_FILE_TEMP '...

  Fact.

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:34:53

  Fact update of the snapshot for the above lines Tables... End time: 17 June 2014 Mar 06:35:50

  No records processed = 10110

  Update of the snapshot Tables... Start time: June 17, 2014 Mar 06:35:51

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:36:24

  No records processed = 15110

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:36:25

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:36:51

  No records processed = 20130

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:36:52

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:37:16

  No records processed = 25130

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:37:16

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:37:49

  No records processed = 30842

  Collecting statistics for the table 'AD_CHECK_FILE_TEMP '...

  Fact.

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:37:50

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:38:01

  Completed the instant processing of information

  1 "left on" filescopied_ < session_id > .txt files uploaded to DB: Tuesday, June 17, 2014 06:34:50

  ****************** E N D   O F   U P L O A D ******************

  End date: Tuesday, June 17, 2014 06:38:01

  STOP_TASK: [history of Patch Upload information filesystem] [] [Tuesday, June 17, 2014 06:38:01]

  Already asked the name of the patch directory.

  (The answer was: / u01/9239090)

  STOP_TASK: [AutoPatch startup after software] [] [Tuesday, June 17, 2014 06:38:01]

  Already asked the name of the driver of the patch file.

  (The answer was: u01/9239090/u9239090.drv)

  STRT_TASK: [execute a driver file single patch] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [steps before the part of copy] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [pilot Initial processing steps] [] [Tuesday, June 17, 2014 06:38:01]

  STOP_TASK: [pilot Initial processing steps] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [get Oracle Applications release and read the driver file] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [driver and logic output for a reboot] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [read the release list save file] [] [Tuesday, June 17, 2014 06:38:01]

  Playlist version save file...

  Release list reading registered the file

  STOP_TASK: [read the release list save file] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [driver and logic output for a reboot] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [get Oracle Applications release and read the driver file] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Prereq logic check] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Prereq logic check] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [patch question Ask translated] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [patch question Ask translated] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine bugs apply] [] [Tuesday, June 17, 2014 06:38:03]

  Journal and news file synchronization point:

  Tuesday, June 17, 2014 06:38:03

  Deactivation of the actions that make reference to unrecognized products.

  Journal and news file synchronization point:

  Tuesday, June 17, 2014 06:38:03

  End of unrecognized product verification.

  STOP_TASK: [determine bugs apply] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: process action [Options] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: process action [Options] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: Edit actions for "bootstrap" mode] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: Edit actions for "bootstrap" mode] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Ask for the number of parallel workers] [] [Tuesday, June 17, 2014 06:38:03]

  (The number of parallel workers is: '8')

  STOP_TASK: [Ask for the number of parallel workers] [] [Tuesday, June 17, 2014 06:38:03]

  AutoPatch will run in parallel mode.

  STOP_TASK: [steps before the part of copy] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Not part of copy] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [applied the new applterr.txt] [] [Tuesday, June 17, 2014 06:38:03]

  Didn't need to apply new applterr.txt.

  STOP_TASK: [applied the new applterr.txt] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Version searching for driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Version searching for driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [copy driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [copy driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [driver files Forcecopy] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [driver files Forcecopy] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [screen invalid files for this configuration] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [screen invalid files for this configuration] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [read the file driver files for a list of valid files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [read the file driver files for a list of valid files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [libout Perform actions] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [libout Perform actions] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [To conduct an audit of version] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [To conduct an audit of version] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine the directories to create] [] [Tuesday, June 17, 2014 06:38:03]

  To jump...

  Determine the directories to create for driver specific

  Since no action is present for this driver file

  STOP_TASK: [determine the directories to create] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine executables to bind] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [determine executables to bind] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine the executable files to generate Forms] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [determine the executable files to generate Forms] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [library files determined PL/SQL to generate reports] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [library files determined PL/SQL to generate reports] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [files determine the reports to generate] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [files determine the reports to generate] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine to build the files of messages] [] [Tuesday, June 17, 2014 06:38:03]

  To jump...

  Determine if you need to generate messages for driver files specified

  Since no action is present for this driver file

  STOP_TASK: [determine to build the files of messages] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Find bugs with any active] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Find bugs with any active] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: custom view [files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: custom view [files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [copy files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [copy files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Forcecopy files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Forcecopy files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Perform actions of libin] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Perform actions of libin] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [create directories] [] [Tuesday, June 17, 2014 06:38:03]

  To jump...

  Create specific directories pilot

  Since no action is present for this driver file

  STOP_TASK: [create directories] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Relink executable] [] [Tuesday, June 17, 2014 06:38:03]

  Reissue of executable links...

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: No.

  Release includes the hash table

  Release fixes hash table

  Hash table freeing basedons

  Releasing entities hash table

  You must check the file

  / U01/applr12/Apps/apps_st/Appl/admin/prod/log/adpatch_901

  to find errors.

  Kind regards

  Dear X E H E R

  I have faced this message also when installing

  ATTENTION: All workers have failed or are pending:

  Failed: File WFRESGEN worker 1.

  Failed: File WFRESGEN worker 2.

  Failed: File WFRESGEN worker 3.

  ATTENTION: Fix the worker failed above the Manager to continue.

  What it means?

  Kind regards

  Ahmad

• How standby database works

  Hello!!

  I created the database (testcat) pending for the primary database (test) using the command RMAN duplicate on the same server (windows XP) on Oracle 11.2. I know how to create the standby database but I don't know how and when Eve database works. I checked the file init.ora backup of database that contains all parameters prefixed to *. as follows

  * .db_create_file_dest = "F:\app\Administrator\oradata".

  * .db_domain = "

  * .db_recovery_file_dest = "F:\app\Administrator\flash_recovery_area".

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testcat".

  *. Db_name = 'test '.

  * .control_files = 'D:\APP\ORACLE\ORADATA\TESTCAT\CONTROLFILE\CONTROL_STAND1. CTL "

  While the primary database init.ora file contains entries like

  db_create_file_dest = F:\app\Administrator\oradata

  db_recovery_file_dest = F:\app\Administrator\flash_recovery_area

  db_recovery_file_dest_size = 4039114752

  control_files = 'F:\APP\ADMINISTRATOR\ORADATA\TEST\CONTROLFILE\O1_MF_8TXW6QN0_. CTL.

  So I want to know is

  1. What IS the difference between the settings that start with. * and start without. *

  2. can I set db_create_file_dest parameter in init.ora backup of database to another location.

  3. how to make journal apply to the standby database when I run ALTER DATABASE RECOVER... command

  4. where log files archived on eve of the databases will be stored?

  Hello

  You mean there are two types of transport for recovery logs.

  ((1) ASYNC 2) SYNC.

  1. If the transport type is ASYNC what background process will perform redo transport?

  LNS background process

  2. If the transport type is SYNC then what background process will perform redo transport?

  If version<11.2.0.3 then="" lns="" ,="" else="">

  3. is there a difference between ASYNC and SYNC?

  SYNC required for the Protection of Max and MAX availability Modes, ASYNC held a Max performance.

  4. According to your first post, RFS receives (which exist in standby mode) repeat primary and MRP applies it again then what is the role of SRL, LGWR - LNS, GAP?

  SRL required for demand in time real process and Max Protection and availability modes Max.

  When the GAP occurs, not transported logs archived corrupted or deleted on the side of priamry.

  Concerning

  Mr. Mahir Quluzade

  p.s. Please read: Data Guard - content

• RMAN-08120: WARNING: log archived not deleted, not yet applied watch

  I get RMAN-08120: WARNING: journal archived not deleted, not yet applied watch on primaries
  but when I run under query, I get the same result of primary and backup
  
  SQL > select max(sequence#) from v$ archived_log;
  
  MAX(SEQUENCE#)
  --------------
  44051
  
  SQL >
  
  
  Eve is a log switch behind only!

  Hello;

  If RMAN tries to remove an archive which is not yet applied in standby log, you see the RMAN-08120

  It's a good thing. As long as you don't have any archives for days on standby, you probably don't have a problem.

  What are your RMAN settings for the database of the day before?

  MetaLink Note: 361182.1 can help too. Or Note 1079953.1

  Your main, make sure that:

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
  

  Please consider closing some of your old issues to clean up the forum.

  Best regards

  mseberg

• newspapers are not get applied to the eve of the database

  Hi guys,.
  
  I installed oracle 10g R2 on RHEL5. I also created a database of watch on the same host at the elementary level.
  
  now everything works fine, but when I checked if archived logs is applies or not, I found that no newspaper use.
  
  When I checked the log files, I said that
  
  Killed Dec 30 12:22:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log 7 thread 1, fake newspaper n ° 3 in header
  ORA-00312: wire 7 1 online journal: ' / u01/app/standby/std_data/redo07.log'
  Killed Dec 30 12:22:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log 7 thread 1, fake newspaper n ° 3 in header
  ORA-00312: wire 7 1 online journal: ' / u01/app/standby/std_data/redo07.log'
  Killed Dec 30 12:23:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log thread 5 1, fake newspaper # 1 in the header
  ORA-00312: wire 5 1 online journal: ' / u01/app/standby/std_data/redo05.log'
  Killed Dec 30 12:23:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log thread 5 1, fake newspaper # 1 in the header
  ORA-00312: wire 5 1 online journal: ' / u01/app/standby/std_data/redo05.log'
  Killed Dec 30 12:23:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log thread 6 1, fake newspaper # 2 in header
  ORA-00312: wire 6 1 online journal: ' / u01/app/standby/std_data/redo06.log'
  Killed Dec 30 12:23:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log thread 6 1, fake newspaper # 2 in header
  ORA-00312: wire 6 1 online journal: ' / u01/app/standby/std_data/redo06.log'
  Killed Dec 30 12:23:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log 7 thread 1, fake newspaper n ° 3 in header
  ORA-00312: wire 7 1 online journal: ' / u01/app/standby/std_data/redo07.log'
  Killed Dec 30 12:23:05 2008
  Errors in the /u01/app/standby/std_data/bdump/standby_arc0_7397.trc file:
  ORA-00341: log 7 thread 1, fake newspaper n ° 3 in header
  ORA-00312: wire 7 1 online journal: ' / u01/app/standby/std_data/redo07.log'
  
  
  When I researched this error it is said that this online journal is corrupted, install the new version or reset the logs.
  
  I have reset logs on the primary database after incomplete recovery.
  
  I just want to know that if I reset primary newspapers should I recreate the standby database recovery logs?
  
  coz it generates the same error.
  
  What is the solution?
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on December 29, 2008 22:57

  Hello

  I just want to know that if I reset primary newspapers should I recreate the standby database recovery logs?

  not only you must create redologs Eve but must also create a new standby controlfile.

  Kind regards!

• Firefox 9.0.1 "apply the update"? I can't get Firefox 9.0.1 to install and be usable by the other account on our desktop. as the administrator that the update is installed, other user accounts cannot get beyone 'Apply Update' - what is happening?

  Sorry for the long question. The issue is that totally impossible to install Firefox 9.0.1, so it can be used by the two user accounts on this desktop computer. I tried several times to download the update and install when running the second user account. It does not seem to install - page 'About' Watch 'Apply Update' - which then seems to do nothing. When I go to the primary account user Firefox is fully installed and functional.

  If files have already been downloaded, then delete the files in the folder of updates\0 and updates or you need to run Firefox once as administrator on each account where the files for the update has been downloaded.
  
  You can also remove active - update.xml, or even updates.xml (stores the history of update).

  • http://KB.mozillazine.org/Software_Update (Update works not properly)

  C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
  (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
  

  The "Application Data" in XP/Win2K folder and the folder "AppData" in Vista/Windows 7 are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

• My computer has re boots itself after that it was off for about 5 minutes

  Whenever I turn on my pc it has re boots itself after about 5 minutes, the standby icon is not highlighted more either.  Can anyone help?

  Do you mean that when you turn off your PC, it will turn on again automatically?

  I suggest you run a complete scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  So what that it either detects and remove them.

  Also check your BIOS setting, this is one of the keys F (F1... F12), during startup it will say that one is it or you might have a look at your PC guide (it's different in each system depend on the model of BIOS) and check if it is set to start.

• How to set up a database of Eve 'apply in real time '.

  Hi all

  11 GR 2,

  Rhel6

  How to set up real-time apply such as the transactions are updated in near real-time to the wait, even without switching to log files?

  For example, we have 1 GB size redo logs and assuming that it will take 1 day to fill these newspapers. This means that our expectation will be entitled to 1 day delay of data?

  This means we lost 1 day of a disaster at the primary data value? because the redo log was not able to move the log files?

  Thank you very much

  JC

  Hello

  Hope this helps

  Real time apply ---> all committed changes should have been applied in standby mode

  How to:

  standby mode

  SQL > alter database recover managed standby undo;

  SQL > change managed database recovery ensures assistance to disconnect log current;        --> You should have SRL and this command works up to 11g, 12 c apply by default start with real time

  At the primary level: check the recovery mode:

  SELECT DEST_ID, RECOVERY_MODE FROM V$ ARCHIVE_DEST_STATUS WHERE DEST_ID = 2;

  Read only apply with--> is called as--> ACTIVE DATA GUARD redo apply when the database is open read-only

  
  

  standby mode

  SQL > alter database recover managed standby undo;

  SQL > alter database open read-only.

  SQL > change managed database recovery ensures assistance to disconnect log current;        --> You should have SRL and this command works up to 11g, 12 c apply by default start with real time

  SQL > select name, open_mode, controlfile_type, db_unique_name from v$ database;

  Thank you

• Redolog files to physical standby standby in 11g

  Hi all

  Configure a physical in 11 g standby database on Linux.

  My first question is, Create SRL (Standby Redo Logs)-

  Is - mandatory to set up physical standby?

  
  

  If I create SRL , what would be the advantage for the installation of DR?

  If I ignore it, what would be the downside for the installation of DR?

  
  

  Hello;

  Laughing out loud

  But it is a good idea.

  If your database pending is in maximum protection or maximum availability mode you need.

  If you use Real Time apply on Standby Database you need.

  If you use cascading Destinations you need.

  If you create both primary and Standby you pass quickly without additional measures or issue.

  Redo Eve can also buffer it again entering.

  Best regards

  mseberg

• Removal of archives on Standby and primary

  My scenario:

  RDBMS 11.2.0.3

  I want to put this, but some input from you guys.

  RMAN delete on primary policy: CONFIGURE ARCHIVELOG DELETION POLICY TO NONE;

  RMAN delete pending policy: CONFIGURE ARCHIVELOG DELETION POLICY to APPLIED on STANDBY BACKED UP 1 TIME FOR 'SBT_TAPE ';

  Rman backups are taken on the strip of the main server instead of the day before. and I wanted to know if it's the best way to avoid to get the archive deleted before sent and deleted once applied on the Stanby site.

  
  

  
  

  Hello;

  N ° if you take backups on the primary then I would change the DELETION STRATEGY on letter waiting.

  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY;

  Or use this

  Remove the Archivelogs applied on the physics of the standby database

  Best regards

  mseberg