My computer has re boots itself after that it was off for about 5 minutes
Whenever I turn on my pc it has re boots itself after about 5 minutes, the standby icon is not highlighted more either. Can anyone help?
Do you mean that when you turn off your PC, it will turn on again automatically?
I suggest you run a complete scan with:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
So what that it either detects and remove them.
Also check your BIOS setting, this is one of the keys F (F1... F12), during startup it will say that one is it or you might have a look at your PC guide (it's different in each system depend on the model of BIOS) and check if it is set to start.
Tags: Windows
Similar Questions
-
After I shut down the computer, he re boots itself after 5-10 minutes.
After I shut down the computer, he re boots itself after 5-10 minutes. Weird. I tried to change the settings. Can anyone suggest anything?
Hello
1. How did you shut down the computer?
2. are - it stop with the power button on the computer?If so, this causes the computer in a standby / hibernation
If you shut down properly by clicking on start > stop, then you must wait until the computer is shut down before you close the lid of the laptop. -
my computer guard stop after about 15-20 minutes when I turn it back on I get an error message that says: it was closed for the safety of the environment and of him having served. I got servised at least 4 times and it still has the same problem after a few months.
If its still under warranty take it back. Tell them to fix it properly. Or replace
-
Why my mousepad of envy going crazy after that, I was online for a while?
Why my laptop running Windows 8.1 envy TouchSmart seems to have a mouse who becomes crazy after a few minutes online? Block Web sites and they can only be closed with the Task Manager; get ahead start requires 10 trials, because it keeps flipping from the desktop to the "pretty 8.1 tiles; jumps of magnification of the screen so small I can't read so great, I can't read, and so on.
I know it sounds like The Madwoman of Information Technology, but this could be due to a virus/malware thing where someone got into my system and has kind of a "flag and funnel" system that sends an alert when I log off? I just had to put down a computer that had what was called a 'persistent' pest that cannot be removed with conventional methods of nuke-and-burn. (Not the partition recovery, but DBAN and other).
I just had this happen two times this morning, and both times she was corrected by unplugging and restarting my router.
Is there a way I can just install Windows 7 on a different partition? Is there another way I can solve this problem more effectively by disconnect and reconnect to the network? Is - this somehow related to the previous post from this morning, 'Why HP Recovery Manager starts by Rebecca.exe?'
Thanks to all who responded here.
Hey ElizaDoolittle8,
Thanks for the test for me.
When you say better that you mean that the problem does not occur with the mouse, or less often?
If this always happens with a mouse looking for problem software or Windows. If this does not happen with a mouse, looking at a hardware or driver problem.
You can try to reinstall drivers touchpad with the following link to troubleshoot driver: Driver of the Synaptics TouchPad.
If this is a new issue and it was working properly before you can also try a system restore. What result would be no Windows, updates driver updates or installs software that may cause the problem. It will not affect your personal files. You can see how to do this here: How to refresh, reset, or restore your PC.
Let me know if it helps.
-
How can I fix a form field after that doc was sent for signature?
I sent a doc to the signature of a payment to be made. Account # must be changed, how can I change this field on the form without having to cancel the entire form, create a new after re - enter all the information and then have it signed by the HIGHER-UPS?
Hello Jtufugafale,
From now on, it is not possible to change the form fields, once the document is sent. I probably took this as a feedback.
Kind regards
-Usman
-
Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes
As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.
I'm sorry to see it, but you will need to contact your local care Xperia
http://support.sonymobile.com/global-en/contactus/
Request a trial of vacuum.
The crack may be the cause of the water damage.
-
Help! My computer Dell laptop keeps telling me that Windows Explorer has stopped working. After that another pop up immediately comes up saying Microsoft explore restarts. It does not give me enough time to get what in the start menu, I was able to start the virus scan twice but it does not end. When I run it in safe mode, it continues to be. Any ideas? I was able to access the control panel through the Task Manager, but it doesn't seem to be any abnormal process running.
Hi Roar4life88
1. for how long have you been faced with this problem?
2. did you of recent changes on the computer?Method 1:
You can perform a scan SFC and check. To Perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
Also I suggest you to check if you are facing the same question in the user account new or different administrator account. You can create a new user account on your computer, and then check.Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-accountIf you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
-
Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»
All this began after Microsoft security essentials did an update in February.
Hello
Method 1
I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.
http://support.Microsoft.com/kb/929833
Method 2:
I suggest you perform the disk check and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
hope this helps,
-
Why does my monitor Samsung SyncMaster B2330 start flashing after a few seconds after that, I was on the computer?
Hello
What operating system do you use?
Method 1:
I suggest you check in safe mode.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2:
Troubleshoot monitor and video card
http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-monitor-and-video-card-problems
I suggest you to contact Samsung support center and check out.
-
managed to put the computer in a restaurant that is the method of compensation it back to the date of purchase of 2008.
Don't you think that this will solve my problem. ?I changed the passwords againI received a call of support technique microsoft stating that my computer has been infected evil and that they would clean it for me.
Have I been swindled £ 89.99 from my pension for 12 months cover.I paid money to mauritias amCancel, wipe your computer and change all of your passwords for each account that you contact your financial institutions to warn them to watch for unusual transactions.
-
my computer shutdown itself each time I use netflix for a few minutes
my computer shutdown itself each time I use netflix for a few minutes. I don't know what the cause, but it's okay
Hey, Zain.
Of course, everything is not fine - as a result, the problem. ;)
My first thought would be overheating. Clean dust from the computer lately (if ever)?Spent, I suggest you have a look through the system logs (right click on computer > manage; go to computer Management\System Tools\Event Vieewer) and find the event entry that indicates why the computer turns off. You'll find it at ~ downtime (can be registered just before closing, can be generated on the reboot log entries.) You devriez find the offending entry in Windows logs\System.
Whatever it is, search through newspapers preceded entires, a yellow or red !HTH,
Chris -
My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.
https://discussions.Apple.com/message/30014877#30014877http ://
Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.
-
After a break in service web, Firefox refuses to load the pages I have tried to load during shutdown for about a minute, even after other pages load fine, he is not even trying to establish a connection
Connection errors
https://support.Mozilla.com/en-us/KB/error%20loading%20Web%20sites#w_connection-errors
Check and tell if its working.
-
Remote works for about 5 minutes after I turned on my Qosmio F60
Hi there all the
My Qosmio F60 remote works for about 5 minutes after I turned on my pc...
How can I make it works normally?all Ty<>
Hey,.
And after these 5 minutes, you get an error message or what happens?
Either the remote or not so did you start some applications after 5 minutes they could affect this function?
-
My iPad and iPhone will be printed using AirPrint on my printer HP Deskjet 2540 for about 40 minutes and then will not be able to find all of the available air printers. No idea why. The deskjet printer shows that there is a wireless connection.
Hi Mpsfeldt,
Thank you for using communities Support from Apple!
Your question, it looks like you are only able to use AirPrint sporadically. We know that situations of this kind can be frustrating, but we are here to help.
To begin the process of solving problems, I suggest you to read about the section If you can not print on your printer AirPrint in the following article.
Best!
Maybe you are looking for
-
Recovery of the Internet wants to install more recent OSX
Hello I'm trying to reinstall OS x on a Macbook Pro mid-2010. I erased the hard drive and now need to reinstall. Following the advice of many threads on this site and others, I try to use Internet recovery to reinstall the original OSX (which was in
-
Toshiba TL938 fails to display Greek subtitles, USB movie playback
Hello The Toshiba media player play well the videos that are in the usb port, but is unable to correctly display theGreek subtitles. Even if they are charged, these characters appear wrong. I tried to convert the srt file to UTF - 8, but it made no d
-
HP Pavilion 11-n010dx x 360 PC bad volume control
Published in the forum of the laptop and solved, 14/01/2015. When the system starts up happens immediately with the box of volume indicator on the screen which indicates the maximum volume of 10. Try to reduce or cut the output by using the keys on
-
HP Scanjet 7400c driver for Mac OS 10.8
I'm upgrading to OS 10.4 to 10.8 and the latest driver for the Scanjet 7400c is dated 2004, the same software that came with the scanner when buying? I doubt that it runs with Mountain Lion? Any ideas?
-
Hi all Is someone can you please tell me if it is possible to completely block the use of Skype on an internal network using a router ADSL 877. I'm in advanced ip services 124 - 15.T8. I have read, followed and implemented the document from cisco "Ci