About RMA of power supplies
Historically, work section that I am part of a requested RMA for the C4500 power supplies, like 1 RMA (up to two PS) by SN chassis and never using this chassis to commit an RMA again. However, it seems strange to me, that if I committed the same RMA number, because there are chassis, I wouldn't so no chassis to commit any future this RMA.
I have the theory that section my classmates and I learned incorrectly in this area, as it seems that we could submit future RMAs on equal components of a given the chassis number of components, there, to an unspecified amount... on the assumption that all RMA is fully completed in a given event.
Is my true theory? Can reuse us SNs chassis used previously for RMA of previously received replacement devices that have more later that went wrong?
Thanks for any help/clarification.
you're saying that thought is exact, and my classmates of the section have been wrongly taught.
No, this isn't what I meant.
Rules change (and that's what I mean). Perhaps the method they learned were the "old school" method, but today it's different. I RMA - ed several SFP / SFP + by using the serial number of a single chassis 6807 as a source and I have not encountered any problem.
Tags: Cisco Support
Similar Questions
-
My child has its own Apple ID, throughout I would buy apps for her and she would transfer to his iPad. But since a new update she has no access to its power supplies that are on my shopping list. She is using "Video star" app?
Hi Breda49
iTunes purchases (free downloads are taken for granted) are permanently linked to the Apple that was used to buy ID.
To work around this problem, you can set up sharing of family and your child. This will allow you to share all your purchases.
-
Error message, unbalanced power supplies, battery switch, cisco 3750 x
Hello
A new Member switch has been added. There seems to be a power supply problem as alerted in the newspapers of the switch, as shown.
Journal:
% PLATFORM_STACKPOWER-4-UNBALANCED_PS: electric battery switch 3A unbalanced power supplies
When I watched this show, research has pointed out this bug; CSCtg20513. The bug suggested orders, below;
You can enable or disable ports (stop/no closed) battery on the unit which incorrectly reports this error.
config t
battery-switch
Standalone
no autonomousHowever, these commands have been ineffective.
See the Version
Version 12.2 (55) SE3,.
Any other suggestions to help, is very much appreciated!
Thank you
JoBee
That fix is an earlier version, SE2, SE3 is not down like 1 of the service version that is why he can not work
12.2 (55) SE3 is almost to the State deferred as well as I would upgrade to a more recent image which now has 4 years of
Have you tried to manually reposition the power stacks
-
Question about Satellite A30-power adapter
Hello
I own a laptop Satellite A30 and my charger just died. I have looked on the internet to buy a new one, but can not find the same model of the same brand (delta ADP-90FB REV electronics. (E) and having trouble finding something on the site Web of Toshiba.
I found some Chargers compatible with laptops Satellite A30 on another site, but they are quite expensive (about £55). Another less expensive option?Thank you
Thomas
Hello
Believe me: it s better to use than stuff unnamed original equipment. On the one hand, you win money and if your machine is broken due to a power adapter that gives your machine
a wrong voltage or whatever.I had a great experience with my tecra 8100 a few years ago:
My old AC was broken, so I bought one in a store, which has been declared as "corresponds to 100% and blablabla".
Cost: $ 37
After a while my machine freezes sometimes and for a day-> no boot.
Then I gave my machine to fix after they have made their diagnosis, they asked, what sort of AC, I used. Heh? They explained to me, I used the AC adapter was not a constant voltage,
If some capacitors smd-says 'goodbye '.You can save money, but give you him another side, believe me.
Welcome them
-
Questions about Satellite L735 power 11(d)
Hello
I recently bought L735 notebook computer 11(d) series. I have a problem with the power indication. Even after completely stop the laptop the power light lights up with an orange indication. After stopping, the power indication starts in a few seconds. I need solve problems. Please notify.
concerning
Hello
Are you sure about the laptop stops and does not access the standby or hibernation mode?
However the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.In this case, the phone technician should test this.
-
control e363x of agilent power supplies series
I'm writing a vi where, after 30 seconds I want to change the output power of the power supply e363x agilent.
The communication is done via Rs232.
Initially I econfiguration tht to limits and voltage intial level then I created a sequence of images and otherwise I put a delay of 30000msec and then a trigger of software to modify the level of tension.
I repeated this sequence about four times.
When I run that the vi connected to my diet food .the first 30 seconds time-out is executed however the second time delay lasts only 10 dry and the last periods is performed properly.
However when I run the PGM without any connected instument I sent some smaple output form different frameworks and the delay time of 30 seconds was performed in all four times.
1. so I do not understand why in the real world scenario the second expected is not running or starts to run as soon as possible?
2.i got the trigger output example code in the driver. But I was wondering if I could just replace this part of the code with four others configure the voltage output with different levels?
I have attached the vi for your reference however if you do not have the drivers installed, you can refer to the image file showing the frame delay atypical and the handle of the pitcher.
Clarification in the problem will be highly appreciated.
First comment!
do not wait until the next multiple ms if you want to wait.
He expects indeed but the first call may end soon! Somewhere between 0 and max all the time!
Read carefully what it means and use the ms of simple waiting in your case!
-
XPS 8100: Compatible power supplies
Before that I bought the 8100 that I had to replace the power supply XPS 420 older computer. This proved irritating, since she did not had a standard power supply and a necessary compatible with Dell. In preparation for the upgrade to a Nvidia GTX 460, I need to upgrade the anemic 350w power supply in this machine at least 500w. What brands have other used? I have the service manual so I can replace it's pretty easy. I don't want to spend $80 on a new PS and come back over and over again trying to find one that matches.
Thank you all.
Don't know why you had a moment difficult with feeding 420 as who would take any standard ATX power supply with a 20 + 4 or 24-pin. The 8100 will be the same. Dell stopped using supplies owners a few years ago and all the newer systems like the 8100 will have standard ATX 24 pin supplies.
-
Would I be able to use ATX power supplies in your xps desktop 8700?
I think with the purchase of a computer XPS 8700 to make some reasonable amount of computation heavy work, so I was hoping to spend whatever food is integrated.
Specifically, I would be able to install an ATX power supply? Here's an example of something I would consider installing (it is very powerful, but I'd probably get the 850W version). I found conflicting information on the web about the compatibility of dell.
http://www.Amazon.com/DP/B007F9X9OI/ref=pe_385040_30332200_pe_309540_26725410_item#customerReviews
Daniel191919
ATX PSU are supported.
ATX power supply can be installed, with a power of 20 + 4 pin main motherboard, or 24 pins as the 8700 XPS has a rear panel open, with or without the on/off switch.
Note: A power supply with 5 SATA connectors, is necessary.
It was reported that it is better to buy a PSU with a depth of approximately 5.9 ".
Bev.
-
OptiPlex 330 (tour) - compatible power supplies?
I have a Dell Optiplex 330 minitower with a 305 Watt power supply. I get an absolute beast of a video soon card that exceeds the power of this power supply - unfortunately I need about 400 Watts for safety. I need to know if I need a diet that says explicitly that it is compatible with this model, or if I can get away with a standard ATX or same BTX power supply. Dell does not offer anything better than a 305 Watt power supply, unfortunately and the only model I found on Internet, which specifically mentions compatibility with the cost of my model supply almost $100. Someone at - it experience with the upgrade of power supply to the case of this model, or find out if Dell has stopped using power connectors card mother owner?
-
Security concerns about the external power supply connected to the my map of 9401 TTL inputs
I have an external power supply (5V DC, 500 my) that I use to test my card 9401 count entries and check my LV code is working properly. Power + 5V is used as high signal and ground as a weak signal. I haven't done the link yet because I wanted to know if there is any concern to burn my card.
Hello
Normally, if everything is OK, it shouldn't be a problem.
But in the real world "things" happen
My Advisor is to add resistance series (in this case 1 k) to protect your device if Murphy enters the room something goes wrong.
-
Can you please tell me if I can use any adapter (a fact my Microsoft for I.T.E, material computer) as an adapter for my original Xbox 360 elite; or if I have a block of power SUPPLY Xbox 360?
Hello
I suggest you to send your request in the XBOX Forums for assistance.
-
Question about support for power management in the comments on a laptop.
V6.5.2 workstation
Home XP/32
Guest XP/32
The icon of power (in the taskbar) in the prompt comes as being powered by the source. When I host out of battery power, the host icon changes to a battery, but the comments icon shows always operated by HQ should change to a more battery?
Cool, glad it finally works for you. I can't give you an answer to why it was crumbly at first.
I had asked the virtual hardware version, because I believe that the battery information parameter has been added in Workstation 6.0 - for virtual material must be at least at this level (virtualHW.version = 6 or greater).
-
confirming the processors / power supplies apply...
Is someone can you please tell me how I can confirm CPU and/or blocks of power which have been applied.
For example, I 10.2.0.4 databases.
I run opatch lsinventory, and it says the following:
When I select in v$ version in the database, it says:Invoking OPatch 10.2.0.4.7 Oracle Interim Patch Installer version 10.2.0.4.7 Copyright (c) 2009, Oracle Corporation. All rights reserved. Oracle Home : /CP/u01/oracp/oracle/product/10.2.0 Central Inventory : /CP/u01/oracp/oraInventory from : /var/opt/oracle/oraInst.loc OPatch version : 10.2.0.4.7 OUI version : 10.2.0.4.0 OUI location : /CP/u01/oracp/oracle/product/10.2.0/oui Log file location : /CP/u01/oracp/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2010-05-26_13-28-24PM.log Patch history file: /CP/u01/oracp/oracle/product/10.2.0/cfgtoollogs/opatch/opatch_history.txt Lsinventory Output file location : /CP/u01/oracp/oracle/product/10.2.0/cfgtoollogs/opatch/lsinv/lsinventory2010-05-26_13-28-24PM.txt -------------------------------------------------------------------------------- Installed Top-level Products (2): Oracle Database 10g 10.2.0.1.0 Oracle Database 10g Release 2 Patch Set 3 10.2.0.4.0 <===== Notice: Patch Set 3 There are 2 products installed in this Oracle Home. Interim patches (2) : Patch 7210921 : applied on Mon Feb 22 19:34:37 EST 2010 Unique Patch ID: 12172435 Created on 4 Feb 2010, 15:15:05 hrs PST8PDT Bugs fixed: 7210921 This patch overlays patches: 9119284 This patch needs patches: 9119284 as prerequisites Patch 9119284 : applied on Mon Feb 22 19:29:15 EST 2010 Unique Patch ID: 12095738 Created on 7 Jan 2010, 04:36:32 hrs PST8PDT Bugs fixed: 6418420, 7835247, 7207654, 7592346, 6724797, 7936993, 7331867, 9093300 7552067, 5879114, 5457450, 8344348, 7272297, 7136866, 7196894, 7013124 6512622, 7196532, 8568395, 8309587, 7557226, 6509115, 8568397, 8568398 6052226, 7424804, 6817593, 7553884, 6741425, 7513673, 8437213, 6452766 6469211, 7527650, 8309592, 5991038, 6945157, 9119226, 6403091, 7552082 6711853, 8304589, 6052169, 8199266, 6327692, 5756769, 7460818, 6268409 8232056, 6687381, 6972843, 8230457, 6800507, 7027551, 6778714, 6200820 6645719, 7393804, 6775231, 3934160, 6683178, 6650256, 7528105, 6378112 6151380, 6844866, 4723109, 8544896, 5126719, 5890312, 7036453, 8426816 8433026, 7270434, 7172531, 6451626, 8247855, 6324944, 6874522, 7175513 6960489, 7341598, 8576156, 6797677, 8342923, 5895190, 7150470, 7593835 7356443, 7044551, 8227106, 4695511, 7298688, 5747462, 8556340, 7197445 5348308, 7937113, 8341623, 7569205, 6053134, 8409848, 6163771, 6181488 6375150, 7295780, 6345573, 7033630, 7523475, 6954722, 7457766, 7309458 8324577, 6840740, 6804746, 7375611, 8268054, 6512811, 6988017, 7375613 8344399, 7340448, 8362683, 7375617, 8251247, 5933656, 6599920, 7238230 6379441, 6452375, 6352003, 6833965, 7136489, 6610218, 7612639, 6392076 5476236, 7609057, 7609058, 6374297, 6193945, 4693355, 8217795, 7039896 7432514, 7330909, 6952701, 7190270, 8287155, 7207932, 6802650, 7189447 4598439, 6615740, 7155655, 6749617, 7159505, 5868257, 5727166, 7173005 6917874, 7013768, 7691766, 7385253, 7225720, 7257770, 7244238, 7363767 6941717, 8267348, 7710551, 7247217, 8328954, 8909984, 6681695, 8702276 9119284, 8217011, 7661251, 6265559, 6823287, 6991626, 6954829, 5259835 6500033, 5923486, 7432601, 8534387, 5147386, 7697802, 6653934, 7375644 6490140, 7662491, 8331466, 5623467, 6070225, 6635214, 7396409, 6638558 7038750, 6714608, 6838714, 6870937, 7219752, 7263842, 7278117, 6882739 5404871, 8836667, 8373286, 6678845, 6903051, 7936793, 6600051, 7155248 4966512, 7155249, 7197637, 8836308, 8568402, 8568404, 8568405, 5704108 6343150, 7280764, 6923450, 7643632, 6145177, 8836671, 8310931, 6640411 8347704, 8836675, 7155250, 7155251, 8836677, 7155252, 8836678, 7155253 7155254, 8292378, 6219529, 7411865, 8227091, 8340379, 7276960, 7659217 5863926, 7022905, 7123643, 6413089, 6596564, 6851438, 8836681, 8836683 8836684, 7579469, 8836686, 7494333, 7315642, 8340383, 8340387, 6926448 7462072, 7600026, 6679303, 7197583, 7172752, 7326645, 7008262, 9173244 9173248, 7573151, 7477934, 6733655, 6799205, 6980597, 6084232, 7499353 6014513, 7140204, 7254987, 8833280, 6760697, 7693128, 6120004, 6051177 8247215, 6858062, 6844739, 7189645, 5630796, 7196863, 6768251, 7378661 7378735, 8290506, 5970301, 6658484, 9173253, 8309623, 7599944, 7125408 7257461, 6987790, 7568556, 6919819, 5883691, 8886674, 6955744, 6074620 7149004, 6857917, 8283650, 7552042, 8210889, 8287504, 6506617, 6271590 5386204, 6976005, 8330783, 7606362, 7043989, 8309632, 7575925, 6870047 8309637, 8309639, 6827260, 7588384, 6752765, 6024730, 6628122, 8315482 8239142, 4637902, 8309642, 7345904, 6994160, 6404447, 6919764, 7597354 7523787, 6029179, 5231155, 6455659 -------------------------------------------------------------------------------- OPatch succeeded.
However, when I check dba_registry in the database, it displays the following?BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for HPUX: Version 10.2.0.4.0 - Production NLSRTL Version 10.2.0.4.0 - Production 5 rows selected.
So, what is the definitive way to know what PSU/CPU has been applied?COMP_ID COMP_NAME VERSION STATUS ---------- ----------------------------------- ------------------------------ --------- CATALOG Oracle Database Catalog Views 10.2.0.4.0 VALID CATPROC Oracle Database Packages and Types 10.2.0.4.0 VALID OWM Oracle Workspace Manager 10.2.0.4.3 VALID <============ NOTICE JAVAVM JServer JAVA Virtual Machine 10.2.0.4.0 VALID XML Oracle XDK 10.2.0.4.0 VALID CATJAVA Oracle Database Java Packages 10.2.0.4.0 VALID EXF Oracle Expression Filter 10.2.0.4.0 VALID 7 rows selected.
Thanks in advance.PL see this related post - Re: cpu July 2009
HTH
Srini -
Question about the universal power adapter car for Satellite U500
There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
These units have a reputation of reliability or security for the laptop or are they to be avoided?Hello
The problem is that in most cases these s universal adapter takes care of different intensity values
You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.I would not recommend these universal adapters because the laptop needs some value ampere
I recommend buying an adapter that is designed for this laptop to avoid some hardware problemsGet in touch with the local ASP to get such part
-
Power supplies, envelopes and Mac OS 10.6
Recently updated iMac Core 2 Duo Intel Mac OS 10.4.11 to 10.6.2. Was to put in place the new queue for the printer HP LaserJet 4100DTN printer as previous communication was via AppleTalk.
All the features of the printer have been recognized in the queue, including the envelope feeder, but every time we try to select the envelope feeder on a source document he reports: -.
"Replace the parameter of paper Source for the envelope feeder, would cause a conflict that cannot be resolved." No changes will be made. »
Have you tried specifying the size of different envelopes, but the result is always the same.
Mac has all the up-to-date Apple applied.
Did anyone come across this problem and what was the solution?
This issue seems to affect to any HP printing multiple attachment envelope feeder. There is a work around using Tray 1 manual feed, or for a simple envelope print job: selecting expanded dialog printer "Paper feed" and select "first Page since: envelope feeder"... it works fine if you ned envelope that only! but it's such a shame that 70 envelopes charger fails to make more than one.
If someone else has a better solution please post!, I use a HP P4015 on HP laserjet P4515 driver because there is no driver of the 4500 series even with the latest updates... hmm that job...
Maybe you are looking for
-
new app can be inappropriate for certain age groups when the iPad is used by children in the domestic workplace or school. How can I remove this app? Fit in a folder is not a satisfactory solution that proved ineffective. Thank you.
-
iMac you see is not all 16 GB of RAM installed
I have a 27 "iMac late 2009. I7 2.8 GHz I had little RAM this Christmas to upgrade the stock 4 GB it came with. I put sticks of 4-4 Go inside, but he sees only 8 GB of it. I have re-sit and rearranged the papillotes a few times, but he sees more than
-
What is HP Scanjet Professional 3000 compatible with Windows 2000 Professional?
is it compatible?
-
Hello My X 200 sound controll of the Tablet is very poor. When you set the volume to 0, the sound is 0. But if I turn the volume to 1, the level of descible is quite high - almost jump at an average level of my X 60 Tablet. Level 1 and further up to
-
How can I fix svchost?