control e363x of agilent power supplies series

Similar Questions

• My child has its own Apple ID, throughout I would buy apps for her and she would transfer to his iPad. But since a new update she has no access to its power supplies that are on my shopping list. She is using "Video star" app?

  My child has its own Apple ID, throughout I would buy apps for her and she would transfer to his iPad. But since a new update she has no access to its power supplies that are on my shopping list. She is using "Video star" app?

  Hi Breda49

  iTunes purchases (free downloads are taken for granted) are permanently linked to the Apple that was used to buy ID.

  To work around this problem, you can set up sharing of family and your child. This will allow you to share all your purchases.

• Agilent Power Supply E3645A IVI Driver Communication error

  Hello world

  I'm trying to communicate to Agilent power using IVI Drivers. I join you MAX Report, all the modules installed on the system.

  When I run initialization of the VI for Agilent power, using the simulation with 'Specific Driver', no errors appear. But when I select "do not simulate", I get this error:

  Initialize IviDCPwr with Options.vi
  The primary error: (Hex 0xBFFA0011) function or method not supported.
  Development: FunctionId: 3, FunctionName: InitWithOptions

  Communicate with instruments instrument using Driver works fine, but using the Drivers IVI is not.

  I tried all the steps in this topic .

  PROMT any help will be highly appreciated.

  Kind regards.

  Shane5ab

  Hello, Tanguy,.

  I am pleased that install the specific instruments IVI - C Driver took care of things.  The differences between IVI - C and IVI - COM can be confusing at first.  I hope the rest of your application development goes smoothly.

  See you soon,.

  NathanT

• About RMA of power supplies

  Historically, work section that I am part of a requested RMA for the C4500 power supplies, like 1 RMA (up to two PS) by SN chassis and never using this chassis to commit an RMA again. However, it seems strange to me, that if I committed the same RMA number, because there are chassis, I wouldn't so no chassis to commit any future this RMA.

  I have the theory that section my classmates and I learned incorrectly in this area, as it seems that we could submit future RMAs on equal components of a given the chassis number of components, there, to an unspecified amount... on the assumption that all RMA is fully completed in a given event.

  Is my true theory? Can reuse us SNs chassis used previously for RMA of previously received replacement devices that have more later that went wrong?

  Thanks for any help/clarification.

  you're saying that thought is exact, and my classmates of the section have been wrongly taught.

  No, this isn't what I meant.

  Rules change (and that's what I mean).  Perhaps the method they learned were the "old school" method, but today it's different.  I RMA - ed several SFP / SFP + by using the serial number of a single chassis 6807 as a source and I have not encountered any problem.

• Error message, unbalanced power supplies, battery switch, cisco 3750 x

  Hello

  A new Member switch has been added. There seems to be a power supply problem as alerted in the newspapers of the switch, as shown.

  Journal:

  % PLATFORM_STACKPOWER-4-UNBALANCED_PS: electric battery switch 3A unbalanced power supplies

  When I watched this show, research has pointed out this bug; CSCtg20513. The bug suggested orders, below;

  You can enable or disable ports (stop/no closed) battery on the unit which incorrectly reports this error.
  config t
  battery-switch
  Standalone
  no autonomous

  However, these commands have been ineffective.

  See the Version

  Version 12.2 (55) SE3,.

  Any other suggestions to help, is very much appreciated!

  Thank you

  JoBee

  That fix is an earlier version, SE2, SE3 is not down like 1 of the service version that is why he can not work

  12.2 (55) SE3 is almost to the State deferred as well as I would upgrade to a more recent image which now has 4 years of

  Have you tried to manually reposition the power stacks

• Satellite A60 - treatment control of speed under Power Saver

  Hello!

  After I had removed the WinXP preinstalled and installed a normal Windows XP - SP1, I can't control my processor speed more. This option became simply not available in the energy saving program.
  Also, change the processing speed in the BIOS for 'always low' has no effect on it. It seems that Windows simply ignores this setting.

  I tried different third party programs to control the speed, but it did not help.

  Any idea?

  Hi lop
  It's very strange. I really don't understand how this can happen. The recovery CD with Windows XP Home SP1 edition home. It must be the same. Have you installed the right tool electric saver for this unit (TOSHIBA Power Saver V7.03.02.I)? The order of installation is also very important and you can find the file txt on CD Utility & Tools.
  Try reinstalling the energy savings. Can you please tell me why you want to put down? Power of sawing?

• manage requests between acquisition and control program using agilent 34970 A

  Hello
  I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
  to complete the program and control the taps installed in a photovoltaic system, pumping system
  I realized that a second program for the controlit is functional
  but the problem is when I merge the two programs in real-time
  This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
  (the poster of agilent 34970A labview crashes)

  -------------------------------------------------- --------------------------------------
  what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTS

  Sorry for the bad English

  Thank you

  If you are in the same executable, semaphores works well.  You lock the semaphore before making your order and demand.  Release after you get your data.  If the lock is already taken, then the semaphore just will wait until the lock is available.  Only one process can act both in this way.

• control the HP / Agilent 3499 x with RS232

  In the instrument driver network, I fould a 'pilot' that show how to operate an HP / Agilent 3499 B switch using GPIB in LabVIEW.  Problem is that no GPIB on my system.  Is there an equivalent of "pilot" / example VI that shows how to control a switch 3499 using RS232 and LabVIEW?  (LabVIEW 7.1 compatible perfered or 8.0)  Thank you.

  Since it is an IVI driver, you have LabWindows/CVI to change.

  A switch is usually a simple instrument. You can write your own driver or use the Instrument i/o Assistant. I advise to use MAX or Hyperterminal to test communication before writing any code.

• the installation files that are necessary to control a 33210 agilent has via USB

  Hello

  I'm trying to control agilent 33210 via USB to a produce an arbitrary waveform using labview. The installation files I need? Obviously labview 86, ivi specific driver for 33210a, and? After you install labview 86, the program prompted me to install pack pilot devices, which I did, but he asked for disk 3 that does not exist in the package, I downloaded on ni.com.

  BTW, is there a guide on where to go from there? I'm more c/matlab programming and graphic...

  Thank you very much

  Hi User2009,

  Once you have installed LabVIEW and NI-VISA, you can do the rest of LabVIEW.

  The simplest process is:

  1. Go to tools' Instrumentation' find instrument Driver and to use the finder driver tool to download and install the appropriate driver (I recommend getting the pilot LabVIEW Plug - and - Play project).
  2. "Once you have installed the driver open the example finder and navigate to hardware input and output" Drivers of instruments ' LabVIEW Plug and Play and find an appropriate example.
  3. Select your device and run the example to make the work of communication course.
  4. Use the example as a starting point and make any changes you need.

  I got to have an Agilent 33120 at my office, so I recorded a quick video for you to the process described above.  I use GPIB, but the process must be the same for USB.

• XPS 8100: Compatible power supplies

  Before that I bought the 8100 that I had to replace the power supply XPS 420 older computer.  This proved irritating, since she did not had a standard power supply and a necessary compatible with Dell.  In preparation for the upgrade to a Nvidia GTX 460, I need to upgrade the anemic 350w power supply in this machine at least 500w.  What brands have other used?  I have the service manual so I can replace it's pretty easy.  I don't want to spend $80 on a new PS and come back over and over again trying to find one that matches.

  Thank you all.

  Don't know why you had a moment difficult with feeding 420 as who would take any standard ATX power supply with a 20 + 4 or 24-pin. The 8100 will be the same. Dell stopped using supplies owners a few years ago and all the newer systems like the 8100 will have standard ATX 24 pin supplies.

• Power supplies, envelopes and Mac OS 10.6

  Recently updated iMac Core 2 Duo Intel Mac OS 10.4.11 to 10.6.2.  Was to put in place the new queue for the printer HP LaserJet 4100DTN printer as previous communication was via AppleTalk.

  All the features of the printer have been recognized in the queue, including the envelope feeder, but every time we try to select the envelope feeder on a source document he reports: -.

  "Replace the parameter of paper Source for the envelope feeder, would cause a conflict that cannot be resolved." No changes will be made. »

  Have you tried specifying the size of different envelopes, but the result is always the same.

  Mac has all the up-to-date Apple applied.

  Did anyone come across this problem and what was the solution?

  This issue seems to affect to any HP printing multiple attachment envelope feeder. There is a work around using Tray 1 manual feed, or for a simple envelope print job: selecting expanded dialog printer "Paper feed" and select "first Page since: envelope feeder"... it works fine if you ned envelope that only! but it's such a shame that 70 envelopes charger fails to make more than one.

  If someone else has a better solution please post!, I use a HP P4015 on HP laserjet P4515 driver because there is no driver of the 4500 series even with the latest updates... hmm that job...

• The output on my Macbook Pro is not giving me the drop-down list, & happens either in the port of the helmet or digital port and neither one is what I need. I tried turning off the computer and hold "Shift"' Control', 'Option' with the power-o ".

  The output on the sound output box has no drop downs. The audio output suddenly disappeared and when I went to the 'exit' sound in 'sound preferences' the only thing that would show was the headphones.  After that I tried a couple of things suggest that 'Helping Apple', sometimes in digital form & everything that happens you can't change for something else.  Things I've tried suggested by Apple press help were the "Shift control option buttons & button / stop at the same time."  or press the Option, the command, the P & R key as soon as possible after you have pressed the button On.  Hold down until after the second gong during a manoeuvre.   This did cause the digital option, but none of these 2 is the one I need.  Help

  Perhaps, it would be useful to know what that is exactly the one you need. Are get you an external speaker output or anything like that. Also, it would be useful to know the operating system you are using.

• Qosmio G20 remote can be used to control the volume of a TV series?

  Hello. I read the instructions here http://www.salloway.org.uk/mediacenter/2005/index.html#remote, for programming of a Media Center remote control to adjust the Volume of a television. I can't the procedure to work with Toshiba Media Center Remote black :(

  I have a USB DVB - T Tuner connected to a Qosmio G20 connected to an XBox 360 connected to the LCD TV. The Toshiba remote has no problem of control of the XBox 360 (as Media Center Extender). But I need to juggle the two remotes... the TV for the Volume remote control and remote control Toshiba for everything else.

  Is it possible to program the Toshiba remote?

  Have you tried to connect the remote control or 'learn' to another TV? Maybe you should try it because it may be that the LCD is just incompatible or else.

  Would appreciate feedback. :)

  Welcome them

• How to control the TTi QL564P Power Supply with USB connection?

  Hello

  When I connect the TTi QL564P power supply via the USB port I see not on MAX (peripherals and interfaces) the virtual serial connection. With GPIB, everything works great!

  I already downloaded the latest drivers on the site of the IFG.

  And I created a simple VI like this:

  OPEN--> VISA VISA WRITE ('V1?") --> DELAY (0.1 s)--> READING of VISA--> VISA CLOSE

  (works via GPIB, does not work via USB)

  VISA OPEN I have the name of resource VISA only the LPT1 and COM1 ports available... so where is the USB port (this virtual serial port, case)?

  VISA GPIB resource name is the ALIAS that I set on MAX...

  Thanks for the help

  OK, the solution was... on the front panel of the power supply, I replace the USB bus (I had default GPIB )

• It is a question on the Xbox 360 but brought in another topic of Microsoft-oriented; power supplies.

  Can you please tell me if I can use any adapter (a fact my Microsoft for I.T.E, material computer) as an adapter for my original Xbox 360 elite; or if I have a block of power SUPPLY Xbox 360?

  Hello

  I suggest you to send your request in the XBOX Forums for assistance.

  http://www.Xbox.com/en-us/forums