about stored user name and password on the XP computer

Similar Questions

• My stored user names and passwords are removed several times each time the computer restarts. ______

  My "XP Home Edition' Service Pack 3 > stored user names and passwords are removed several times each time the computer restarts.

  Please check the LINK for the process that I'm going through, but nothing helped.

  http://www.box.NET/shared/zcokjesxx3

  Thank you for your kind cooperation.

  Sincerely,
  Frank

  Hi Ajay,

  It worked!

  Was the only thing that I changed, I added a % USERPROFILE % so he looked like that before

  %USERPROFILE%\Application data

  Instead of like this USERPROFILE%\Application Data

  Not sure if this was necessary to make - but again - it WORKED...

  Thank you very much for your time and your help is to solve this for me.

  Sincerely,

  Frank

• How do I remove my stored user names and passwords?

  How can I delete stored user names and passwords?

  Here's how to remove a site from the list of saved passwords:

  1. go to tools | Options | Security Panel

  2. in the passwords section, select the saved passwords

  3. find the site you want to remove from the list. Select it.

  4. click on Remove . Select OK to close this window

• PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  Vista - Windows 7 network connection. username and password is unknown.

  Hello

  I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

  If someone could answer this question, it would be great.

  Hello
  Maybe this can help.

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Options > Security > passwords saved and printed on the site, the user name and passwords saved on my computer, thank you.

  Options > Security > saved passwords, can I print on the site, the user name and passwords saved on my computer, or how to locate the file where this information is kept. I change computers and want to transfer the information to the new laptop. Thank you.

  See

  • Print a list of passwords, must be run from a local drive by the directions), the - edmeister.com

• Oracle APEX server requires a user name and password of the server said XDB?

  Hello

  After you install version 5.0 of the APEX and tries to access the page admin APEX with EPG, I am invited with a pop-window that asks you a user name and password for the XDB?

  Does somone has experience with it? What can be wrong in the configuration?

  Thank you in advance.

  Kind regards.

  Hello

  I found the problem.

  Is there somwthing wrong in the security settings.

  I re - run one of the steps with the right parameters of the call:

  DBMS_NETWORK_ACL_ADMIN.append_host_ace

  There is an error in the settings.

  Now, I'm working.

  Kind regards.

• autologin Windows 7 without box "users must enter a user name and password to use this computer"

  My dialog box user accounts does not the box "users must enter a user name and password to use this computer" and how do I turn it on?

  Hello Russ,

  You can continue with the following steps to support.  However, if your computer is on a domain, unfortunately, there's nothing we can do.  You will need to contact the system/network administrator.  TechNet forums can be beneficial for a resolution on your http://social.technet.microsoft.com/Forums/en-us/category/w7itproinquiry.  Please create a Restore Point and backup of the registry before proceeding.

  1. click on start, run, type regedit, and then click OK.
  2. look for the following registry key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon
  3. with the help of your account name and password, double-click the DefaultUserName entry, type your user name, and then click OK.
  4. double-click the DefaultPassword entry, type your password in the value data box, and then click OK.

  If there is no DefaultPassword value, create the value. To do this, follow these steps: a. in the registry editor, click on edit, click New, and then click String value.
  b. Type DefaultPassword as the value name, and press ENTER.
  c. double-click the newly created key, and then type your password in the value data box.
  If no DefaultPassword string is specified, Windows XP automatically changes the value of the AutoAdminLogon registry key by replacing 1 (true) to 0 (false) to turn off the AutoAdminLogon feature.
  5 double-click the AutoAdminLogon entry, type 1 in the value data box, and then click OK.

  If there is no AutoAdminLogon entry, create the entry. To do this, follow these steps: a. in the registry editor, click on edit, click New, and then click String value.
  b. type AutoAdminLogon as the value name, and press ENTER.
  c. double-click the newly created key, and then type 1 in the value data box.
   
  6. exit the registry editor.
  7. click on start, click on restart and then click OK.

  I hope that this information is beneficial

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• local user name and password if the ACS server fails

  Hello

  I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

  AAA new-model
  AAA of default login authentication group Ganymede + activate
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  Default connection accounting AAA power Ganymede group.
  AAA - the id of the joint session

  RADIUS-server host x.x.x.x
  RADIUS-server application made
  radius-server key, regardless of

  ----------------------------------------------

  I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

  username privilege 15 secret mypassword MYUSERNAME

  line vty 0 4
  local connection

  Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

  Kind regards

  Kevin

  Now you have the password to enable as the fall back method:

  AAA of default login authentication group Ganymede + activate

  Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

  The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

• How to share an internet connection Wi - Fi, which requires the user name and password on a laptop computer of Windows 8 on a PC with Windows XP?

  I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...

  Hello Ashan,

  Thanks for the reply.

  You can try to follow the following suggestions to solve the problem.

  First, try to reset Internet Explorer and see if that helps.

  Reset Internet Explorer

  http://support.Microsoft.com/kb/923737

  Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Additional information:

  We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.

  (Also works for Windows 8)

  Updated a hardware driver that is not working properly

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• What is the default user name and password of the dynamically created edge NSX gateway?

  Hello

  I created a NAT device on request and as part of it, but an edge gateway. What is the default user name and password to connect to the edge device?

  Thank you

  Pankaj

  I do not know the password by default, but you can either define easily. Just go to the network security &--> NSX edges, select your edge, click actions and identification of Climate change information. You can also enable SSH from there.

• User name and password for the installation of VUM on 5.1

  During the installation of VUM you mush, enter a user name and password.  I am referring to the screen that says

  vCenter Server Information

  Enter in vCenter Server location and credential information

  "Please provide the necessary information on the server vCenter Server below.  VSphere VMware Update Manager will need this information to connect to vCenter Server on startup"

  Admin@system-domain should be used for this as it is used for component inventory server and vCenter facilities, or if you have a dedicated account for this other than admin@system-domain?

  If I used admin@system-domain during initial installation, what is the impact of the removal of the admin@system-domain to have privileges in vCenter Server?

  Thank you

  
  

  all credentials are for performs authentication in vCenter initially and they won't be reused.  I would like to use a domain account that is part of the Administrator role in vCenter.

  It is not a service account, VUM runs as local system.

• How to manage stored user names and passwords on a computer under W7?

  I would like to remove a few names user ID in Yahoo.  Where can I manage these in W7?

  Hi KKBrown,

  Thanks for posting your question in the Microsoft Community Forum.

  It appears from the information you want to remove some names to user ID in Yahoo.

  It would be useful that you can answer these questions to help you best.

  1. you are trying to remove information from Yahoo mail?

  2. you access yahoo mail using the client program webmail or email?

  2. what web browser do you use?

  If you try to delete the user name or password stored on Web sites that you have visited previously by using internet explorer, you can see the article and check if that helps:

  DeleteAutoComplete information

  If you try to manage the usernames stored and passwords on Windows 7, you can use Credential Manager to store identification information such as usernames and passwords that you use to open log on to websites or other computers on a network.

  For more information, see the article:

  Store passwords, certificates, and other credentials for automatic logon

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• How can I add user name and password in the target of the shortcut

  I have several shortcuts that require different from the username and passwords then my logon credentials.
  I know that there should be a way to add the username and password in the target of the shortcut.

  I found several online orders, but none of them does not seem to work.

  following commands were tested:
  / u: Administrator /p:P@ssw0rd!
  u user_name-p password
  -l votre_nom_utilisateur - pw votre_mot_de_passe
  UserID = user/password
  / User UserName /pwd password
  / username username /pwd password

  Hello

  1. Your computer is on the field?
  2. What application do you need to save your id and passwords?
  3. Are you referring to online applications?

  If the computer on the domain, I suggest you contact the technet forum, where we have some support professionals who are well equipped with the knowledge on area issues, to do that please visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• How can I remove the 'remember' user names and passwords to sell a computer?

  I'm selling the computer and want to 'clean up', the removal of personal accounts, the user id and passwords that are "saved" on the system.  How can I remove them?

  The best thing to do would be to completely erase the hard drive by using a "safe remove" utility like Darik Boot and Nuke.  If you wanted to be generous, you can then re-install Windows XP and include the installation CD with the computer.

  Most paranoid individuals pleading to remove the hard drive completely, the computer without a hard drive, selling and maintaining or physically destroy the disk hard as you wish.

  If you do not have Windows XP's installation CD, and you insist on the sale of the computer with an operating system, the best thing would be to use the system of the manufacturer of the computer to restore the computer to its "fresh coming from the factory" State.  Usually, this is done by using a hidden partition on the hard drive.

  There are 'file shredder' applications available (you can search for them), but the problem with the deletion of files and folders individual - even if the removal is made with a tool that prevents the recovery data reasonably - is that you never know if you managed to root out all your personal information.  In particular, you probably will not be able to assume that the registry of Windows was completely "sanitized."

• How to pass a user name and password in the URL for report BI Publisher as parameters

  Hi all

  I have a requirement to navigate to a specific report in the BI Publisher a

  external application when the user clicks on a link. I've had this work using

  the link below

  https://blogs.Oracle.com/XmlPublisher/entry/accessing_xmlp_enterprise_repo

  Now, when a user clicks on this link he is redirected to the BIPUBLISHER login page,

  How can we get around this to hardcode a username and password in the URL (like GO

  URL for analytics).

  Thank you

  Hello

  https://> /Analytics/Saw.dll? Answers & NQuser => & NQpassword =>

  Kind regards

  Dilek