ABOUT THE conime.exe FILE

Similar Questions

• Question about the SansaUpdaterInstall.exe file

  Hello, I am a new user of Sansa Clip.  Before doing anything, that I read on this site about updates of firmware etc..  The video that the sticky points to is not updated I think, because my setup is a little different.  I'm went sansa.com/download site and clicked on the choice under the Sansa Clip (a first), updated firmware from sansa.  I chose save to the desktop as the video say.  But the screens after this were different.  I had to open the file sansaupdaterinstall.exe on my desktop and then he asked me to accept, etc, and then to connect my player and he did his thing.  Find the most recent update that you made and installed, said to unplug the player, the player says installation finished.  I checked, and the new firmware from V02.01.32A is now listed.  He said not to change USB MSC or something like that.  I checked my USB setting and it's even auto detection.  Everything seems to be fine.  My question is (I know this sounds stupid) can I delete this file .exe on my desk now?  Where is the update installed?  The video says he wants you, but he did not.  I went into c > programs, but no program of Sandisk.  Do you know where they put him?  If I go into Add/Remove is listed, just curious as to where it as stored.  Any help is greatly appreciated, I'm an old grandmother 58 year and new to such things.  Thanks again, Happy Passover and Easter.   Aliza

  With the update update (which has a confusing ring to it), you can leave the application running in the background.  It has been configured to sleep until he sees the combination of a Sansa needing a file update available.  Only, it queries the device when it is plugged.

  Note that the desktop icon is also is no longer displayed unless there is an update available.

  µsansa

• When you try to open some a desktop icon, get the error about the msimn.exe file

  When my wife ties open OE6 since its icon on the desktop, a box shows always ask him to "open with + list of files" with a Ref file msimn.exe that has arisen recently. How are we OE6 to work only on windows xp user profile and not on any of our files without resorting to the OE 6 RE-INSTALLING from scratch and lose all folders and contacts... etc.

  Hello

  I suggest you to select Outlook express as the default mail client

  When pops up an error I suggest you manually navigate to the following location, and then select the file that is missing: C:\program files\outlook express\msimn.exe

   
  In doing the above that should open Outlook Express.
   
  Check out the link for your reference below
  http://forums.techguy.org/Web-email/328145-cannot-set-Outlook-Express-default.html

• What is the purpose of the ame.exe file

  What is the purpose of the ame.exe file.  It has been on my computer by a technician who claimed to be from microsoft

  As Gina, says "This allowed?

  Given that no one I know (and certainly not me) remembers the product key 25 character Microsoft for the Windows installation, I suspect that you were told by the appellant to seek a place of your "license".  Where were who told you to watch?

  Without revealing your current number, the "license" in question looks like a, B, C, D or something else?

  Xxxxx-xxxxx-xxxxx-xxxxx-xxxxx.

  B. xxxxx-xxx-xxxxxxx-xxxxx

  Xxx.xxx.x.x c.

  D. xx-xx-xx-xx-xx-xx

  Still, at least to download the file ame.exe on Virus Total and see what they have to say about it.

• Cannot run the install.exe file...

  I have a PC laptop toshiba a500-025 with the following specifications:

  4 GB of ram
  Radeon ati hd4570 512 MB
  2.1 intel centrino
  Vista 64-bit
  I downloaded assassins creed... and when I click on the install.exe file, it says the following: "the version of this file is not compatible with the version of windows that you are running.
  check your computers sysytem information if you require a version 86(32 bit) x or x 64(64 bit) of the program and communicate with the editor.
  Help... Ive waited a long time for this game... downloaded and now it does not work!

  Do you have this of Direct2Drive?  Basically, the original Assassin's Creed v1.0 is compatible not 64-bit.  You need to have the v1.02 patch.  Available here.  Although I don't think you can install the hotfix without first installing the game.  If you need a more recent copy of the game.  If you buy it on Steam, it will not work.  But if you have the Direct2Drive version, you might have missed the system requirements specifying that you need a 32 bit OS to play.

• I am trying to reset windows xp back to the original settings, but miss me the winnt32.exe file. Where can I go to get the download

  I don't have a winnt32.exe in the i386 folder. My computer behaves very strange sometimes. It drags, freezes and load things on that I do not click.

  You can download SP3 from HERECOMPUTER. Save it to your desktop. Use an extraction of files such as WnRar software to extract the service pack 3 you downloaded to extract the files in the C drive. Once the files have been extracted, click Start > run and paste the command below > click Ok. This should install the recovery console.

  C:\\i386\winnt32.exe cmdcons

  In addition, the i386 folder will contain the winnt32.exe file you requested.

• the csrss.exe file is missing

  I was downloading addons for a game on the internet and then later the next time I turned on my computer, it said I was missing the csrss.exe file and so I searched for it looking to see if I somehow accidentally moved and he didn't so I was wondering if there is anyway I might get this file without reformat my computer and reinstall windows xp

  How can I get a new file csrss.exe

  MD5: f12b178b1678d778cfd3ff1fc38c71fb

  SHA1: d9aa29288951e94773caa1054237d29734e79f34

  SHA256: 42a7aeb7d7056d583b620993f733d259b78600aab2c9b95e58d437a6401c79b1

  ssdeep: 96:1NlAN1CnotgbZm4vU / 93SqYs5FEW5B8enWwG:1NlANooygp/ZSq/5eW5B8enW

  File size: 6144 bytes

  This confirms my suspicions you have (or had) malware. This version of csrss.exe is for service Pack 2 of Windows XP.
  You really need to run MBAM.
  But despite this, if you run at the SP2 level, it is unclear what might make its way onto your PC. There are some out there extremely difficult to detect rootkits. You find you might need to perform a clean installation. If you would rather fight infection, you can always look for guided help:
  http://www.bleepingcomputer.com/forums/forum103.html

• How to obtain the bcupdate2.exe file? __

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you get a message stating that the file NTLDR is missing, it is unlikely that the bcupdate.exe file will solve the problem, but you can download it from my SkyDrive if you want.  I've never used it to fix anything and if you see this message, it's probably not your problem.

  You should also start a new thread/question for your question - no one is going to look at this thread that is older than a year.  Start a new thread/question in order to get some attention.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work

  You have to put the downloaded files in the correct folders on your system.

• Problems with the sound on my PC (i.e., no noise at all). m ' said that the Sndvol32.exe file is missing

  I have problems with the sound on my PC (i.e., no noise at all).  He told me that the Sndvol32.exe file is missing.  I went through the 'fix - it' and the solution is to extract the file from the Windows XP CD.  My PC did not come with it - otherwise, how can I get this file?  Thanks in advance!

  Most of the people do not have a genuine XP bootable CD.   This is good advice if you have a true bootbale CD, but given that the majority of people have never seen one in their life, why start there?  That's why this kind of troubleshooting tips kill me...

  The fix it will not help you.

  This will help you:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Of course the file must never be missing, so something has badly haywire.

  If the system is working properly, what do you think has happened since the last time, that he did not work properly?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for the antivirus/antimalware protection, I followed with some other respectable malware scanners, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• In XP error message - unable to locate the RUNdll.exe file when trying to open Microsoft files.

  Original title: just had a fight with the virus 'Windows XP security 2011.

  I am running Windows XP Home Edition and managed to get rid of the virus, but now I can't open any microsoft file. that is, control or any downloaded files Ms. I get an error message that it can't locat the RUNdll.exe file. How to solve this?

  Thank you aleweeks

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.

  This isn't the answer.  ---> pay attention -------------------------------------------->

  It's time to mark the answer but:

  This "response" meets or exceeds the requirements of Microsoft Answers forum for an "automatic response":

  1. support the answer of engineer or a moderator that is impossible, probably not or will not solve the problem
  2. marked as the answer by a comrade moderator
  3 contains a link to one or more Microsoft KB articles
  4. no activity for 5-10 days

• The svchost.exe file is damaged

  I had a virus on my computer, I installed the Mcafee antivirus, which seems to have found some viruses. However when I do a complete viruscan whenever the scan it gets the Svchost.exe file stops working, Mcafee contacted who informs me that the Svchost.exe file is corrupt, you must contact Microsoft to resolve the problem. Does anyone have any ideas of how filial this file? Thank you very much

  I had a virus on my computer, I installed the Mcafee antivirus, which seems to have found some viruses. However when I do a complete viruscan whenever the scan it gets the Svchost.exe file stops working, Mcafee contacted who informs me that the Svchost.exe file is corrupt, you must contact Microsoft to resolve the problem. Does anyone have any ideas of how filial this file? Thank you very much

  Hey Richard Gibson123

   

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• The wmplayer.exe file has a version number of 11.0.6002.18005 where__11.0.6002.18311 was expected.

  My OS is Vista Ultimate SP2.  When I try to open WMP, I get the following error message:

  "The wmplayer.exe file has a version number of 11.0.6002.18005 where.
  11.0.6002.18311 was expected.

  "Windows Media Player is not installed correctly and must be reinstalled.

  "Do you want to install the player on the Microsoft Web site?"

  When I click on Yes to the question, the web page, that I have has no option to download WMP for Vista.

  How can I solve this problem?  To help guests or you can provide answers.

  Here are simple instructions from Microsoft Support:
  http://support.Microsoft.com/kb/961047

  On Windows Vista:

  1. Reboot your system.
  2. Open cmd.exe as an administrator by selecting Start Programs/Accessories.
  3. Right-click on command prompt and choose Run as administrator.
  4. Type in
     Unregmp2.exe /UpdateWMPVersion
  5. Press ENTER.

  If this does not help, please report back. I have another method that involves editing the registry.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Why windows 7 let download me the Esmutl.exe file that was sent to me by the support of Epson for deletion or uninstallation of a scanner?

  Why windows 7 let download me the Esmutl.exe file that was sent to me by Epson to remove the scanner aa?

  You should report this message from the screen, exactly as it is to the people of Epson who sent you the file.

• accidentally, I changed the default program for the openng exe files

  accidentally, I changed the default program for the openng exe files now I can't reverse my mistake and a lot of things on my count no longer works... I cnt play games or open all programs... what should I do?

  http://support.Microsoft.com/kb/950505

  Note at the beginning of the article that it says that Windows 7 users should go directly to the "Fix it myself" section

  Tricky

• create the executable (*.exe) file

  I could create and executable file (*.exe), but it does not all libraries (*.dll) necessary, IE NIVIsSVc.dll, imaq1349.dll... So I was wondering if someone could guide me to create an executable file with all the necessary libraries to run on a different machine? I have LabView 8.2.1 and XP OS. My *.exe file is to capture an image of the camera (FirWire 1394) and save it in a file on the hard drive.

  Thank you

  Shaun

  SC1,

  Unfortunatley LabVIEW get where the drivers have been installed since. This is to ensure that the same versions of the driver are in LabVIEW and the installation program that you created. The best way to work around this problem in your situation is to reinstall the drivers from your hard drive. You can download the drivers on our website linked below. In the future if you plan to create many installers, copy the contents of the CD driver on your hard drive and install from there. I made a suggestion of product in the past, to make it an easier process. If you want that this so, please visit our product suggestion Center below the link.

  Drivers
  http://Joule.NI.com/nidu/CDs/fn/p/lang/en

  Suggestion of products Center
  http://digital.NI.com/applications/PSC.nsf/default?OpenForm