Absent an error of supported CPU virtualization when upgrading from 4.1 to 5.0

Similar Questions

• ERROR: No supported CPU installed, HP P6310F

  HP p6310F

  Windows 7 Home Edition

  ERROR: No supported CPU installed

  CPU replacement

  Hello!  I replace the CPU in my HP P6310F.  According to this literature, http://support.hp.com/us-en/document/c01949155 , I have an AMD Phenom II X 4 Quad-Core 9xx/9xxe/8xx (Deneb).  My understanding has always been that "9xx" means any phenom II in the class of the 900 series.

  I bought a retail Phenom II X 4 965 Black Edition, part HDZ965FBGMBOX number, installed and get the error message: CPU support is not installed message.  After searching and reading about the error message and other messages, it seems it might be due to the 'black edition' and/or because it is 125 watts.  It was the answer to a few others in the same situation as me.

  Can you please tell me why this CPU is not compatible and please help me with a list of compatible CPU?

  This is also in the 9xx series, but is it at 125W

  HDZ955FBK4DGM AMD Phenom II X processor 4 955 - Quad Core, 6 MB of Cache L3, 2 MB L2 Cache, 3.20 GHz, Socket AM3, 125W, fanless, OEM

  This lies in the 9xx series and is 95W

  AMD HDX945WFGIBOX Phenom II X 4 945 Quad Core Processor - 3.00 GHz, 6 MB of Cache, bus front to 2000 MHz (4000 MT/s), retail, Socket AM3, processor with fan

  The stock processor is an AMD Athlon II X 4 630, 95W

  I can provide any other information you may need, thank you very much!

  There is no AMD Black Edition CPU that are compatible with any PC HP desktop.

  That's what the problem is related to. Black Edition CPU are special processors who have discovered the multipliers for amateur quality motherboards. You could not access the multipliers to overclock the CPU with the motherboard you have installed it anyway.

  Even if you choose, buy and install one of the microprocessors in maintenance & service Guide there is no guarantee HP which will be exploited.

  You should also be aware that installing a different CPU than your office has been delivered with the warranty.

  Sorry to bear bad news.

  The good news is that the processors listed in the maintenance department & guide reputable reports of upgrade in discussions in the forum, to run.

  Best regards
  ERICO

• Error 0x8024402F message when upgrading from Windows

  I have an 0x802440F error message and I can't get help for this problem.  I tried to get updates, but this always error message keeps coming up and no updates are displayed by download. Can you please indicate

  0X8024402F

  Treatment of the external WU_E_PT_ECP_SUCCEEDED_WITH_ERRORS file completed with errors.

  It is a Windows Update error, which indicates some sort of connectivity problem.

  See - you may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941>

  `~`

  Also, try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  As downloads fail, when run you the fix it choose its mode by default when you run the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 12:53 Friday 9 December 2011

• How to fix error code 8024402F when upgrading from windows

  When I update my windows vista, an error occurs saying code 8024402F Windows Update encountered an unknown error.

  Could someone please tell me what is the problem and please tell me the steps of how to fix this.
  If it has to do with a router, please tell me how to solve this problem with the router.

  Thank you

  1 see: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/8024402f-error-keeps-occuring-when-searching-for/ebb9fc06-685a-4cb3-a8b3-d45c6e6afe62

  2. Windows Update, error 80244016, 8024402f or c80003fa
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa

• Error 49.60FF on 4240n when printing from Mac

  It recently came to me and another user. She was on 10.5.8, I'm on 10.6.1. Whenever we would print in duplex, the printer hang with the 49.60FF error.

  After much experimentation, I found that the problem occurred when printing using a preset, which was how we had two set up options duplex. After deletion and recreation of the presets, everything was fine.

  I'm guessing that a recent update to pilot pushed by Apple is incompatible with some of the data stored in older Presets.

  Trying to mark it as resolved. I hope someone else finds the information above useful.

• Message error "GFXUI has stopped working" when starting from the laptop to the top, running Windows 7

  Hi guys,.

  When I start my laptop there is a popup saying "GFXUI stopped working.

  Please tell me what to do...

  Thank you

  Ajay

  The seams of this file to be part of the Intel graphics drivers [1]. Install the latest Intel graphics drivers to fix.

  André

  [1] http://answers.yahoo.com/question/index?qid=20100208064051AArbWBM

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• 643 error when upgrading from Windows Vista

  The problem could be that you need you to update Windows Installer:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8483

  Install and after rebooting your computer, try Windows Update again.

  I tried to download the files on the page of the links you provided and the downloader has indicated that none of them would work with my system. I clicked on all the links on this page indicate suitable for Windows Vista.

• Error code 0 x 80070424 for upgrading from Windows XP

  When you try to make a version 5.1 Windows XP update, I hit the Express button, then get error message 0 x 80070424 'site has encountered a problem and cannot display the page you are trying to view. I have not found this anywhere error code. I use Trend antivirus software. Any ideas?

  Click Start, select run, type: regsvr32 c:\windows\system32\wuaueng.dll

  Click OK

  Try again to WU, if it does not - help

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002/

• Alienware 17 4 beeps on startup when upgrading from memory...

  Hello

  I just got my new Alienware 17... When installing a SSD, I noticed that the locations of two memory under the lid without sticks in them so thought that I would upgrade it stock 8 GB to 16 GB of RAM, flipping the rear unit above and turn immediately got a 4 beep error code which I assume is a memory error?

  Transformed and more and I tried a stick at a time in both slots and got the same problem.

  Now I disconnect the battery when you install the SSD drive and every time I removed and added memory (I see this new design, causing some ESD melt downs that you do not have to remove the battery... anyway, I digress) which leaves me to suspect that there is some sort of lock BIOS or hardware that prevent me from adding additional memory?

  Oh and we don't know good memory that I took the Hynix memory of my Alienware M17X R4, similar marked DELL Alienware 17 and she didn't...

  Help, any ideas or suggestions would be appreciated, or perhaps a BIOS update to solve this... ?

  I have improved my 18 Alienware who had 32 GB of 1600 MHz. 1.35v Micron RAM 32 GB Kingston HyperX 1866 MHz 1.35v RAM. After all, first install the RAM and turning on my laptop, I got these 4 beeps as well and I thought that maybe the RAM is not compatible or something but then I got just the power button for 5 seconds to force the shutdown of the laptop and then power back on then it worked well and have been using it like that for nearly 8 months. I suggest that you try to force the system to stop, and then walk back and try.

  Note: I use the last A10 BIOS

• Beware when upgrading from CF5 to 7

  Finally convinced my company to buy the upgrade of CF5 to CF7 Enterprise. Got the CD CF7, but before you install, download the trial version of 30 days (converted to the developer after 30 days) and install on my PC, the "Developer" so I could test all my apps CF5, made some adjustments are required, before the production server upgrade to CF7.
  
  According to the documentation (online and comes with CF7) and as I was told by the Adobe CF support (415-252-9080 installation only supported), you CAN install CF7 with CF5 left on your PC. CF7 even convert / will integrate both your CF5 settings as possible. Installation of CF7, went to CF7 administrator, put in place of the data sources, other settings, and everything worked. Do you have a server using IIS Configuration and kept all the apps in the c:\Inetput/wwwroot folder.
  
  The documentation and technical support will tell you that you can uninstall CF5 whenever you are ready. So, I uninstalled CF5. Documentation and technical support don't tell you, whatever the CF5 uninstall will remove the CF for CF5 AND 7 administrator. So after the CF5 uninstall and re-boot, I could not access the administration of CF7. CF5 both CF7 store administrator at the same place:
  c:\inetpub\wwwroot\cfide\administrator\index.cfm. When you uninstall CF5, this file is deleted.
  
  Well, you can not run CF without the administrator. So, I looked on this forum, docs online and even called the Support Adobe technique. Guess what? Adobe support told me it was a installation PROBLEM is no LONGER, and I would have to pay $599 for a call of support unique, just to see if I could get my INDEX. CFM recovered/restored. Even if THEY are the ones who told me to install CF7 with CF5 left on the disc and remove CF5 when CF7 has been installed and working properly.
  
  There is nothing on the backup of your folder of... \cfide\administrator, before deleting CF5. So, I had to completely uninstall CF7 and reinstall it. You can not re - install ' ON TOP OF ' as there is no "REPAIR" or similar options (hoped could give me this option, but it doesn't).
  
  Well, 3 hours later (the re - install took about an hour for some reason, very slow) was up and running, data sources of restored CF7. But now, as I tried to install the free trial of 30 days TWICE (even if the 2 install was just 72 hours apart), it things I'm trying to get another 30 days out of it, place it AS a DEVELOPER VERSION WITH water MARKS ON SOME PAGES. You are supposed to get 30 days without a watermark on the 30 day free trial. I was expecting it, so I could show my business a few nice (no water brand) examples of what CF7 could do for our reports.
  
  Now I have to upgrade a development PC CF5 to CF 7 1 (the first was my laptop, the 2nd is my office). Not sure whether A. remove CF5 Completely before installing the version 30 days free trial/developer, or B. do installation with CF5 left on the PC, then when it comes time to remove CF5, save folder... \cfide\administrator. In fact, shouldn't you save the folder integer c:\inetput\wwwroot, just to make sure?
  
  Only problem is I can close restore some programs CF5, or copy on CF7 programs with some old programs CF5. There is tons of stuff in there and don't know who's who.
  
  Does anyone have suggestions until I make it again, on which is the best way to do the upgrade? Delete firstly, CF5 or keep it and backup/restore after removing CF5? Thank you for any help or advice.
  
  Gary
  

  It was an old message, but yes, you're right. Copy the CFIDE folder in the web root, and you ask your administrator to CF. So far, am in love with CF7. Great program, especially WebCharts 3D. There are better trace programs (including the latest version of WebCharts), but one that comes with CF7 is much better than what came with CF5, and it's free. Gary.

• Lost the synchronized data when upgrading from Mozilla

  When I upgraded to Mozilla all the information I had synchronized has been deleted so I can't set up the synchronization with all the information I had. I ' ts as all the timing information has already been removed from the browser after the update.
  I want to recover any of this info because it was really important, and it's a lot.
  Thank you

  Hi ivanxos,
  Unless you have a return to the top of the local profile, the data cannot be guaranteed to the top. It is possible to link the account to the profile that is ongoing, but this ensures all data again that she was.

  There is a restore to the previous version feature in your operating system may be useful. Profiles - where Firefox stores your bookmarks, passwords and other user data If you right click on your profile folder and restore to a version before the update, you can recover data from local profile.

• Acer eRecovery fails when upgrading from XP to 7

  Hi - I have an Acer Veriton M265 that came with XP as a preload and rights to upgrade to Windows 7.

  I wanted to run XP and load Win 7 then attempted to use the "Recovery" button on the front of the machine.  I could not recovery appear.  I had my own set of recovery CD (2 discs) and I launched the restore CD.  CD, I created when the system was born.  The installation runs through and looks like it will be successful.

  But, after that a reboot (invited by the eRecovery software) Windows starts, shows the colourful animation, the join of the orbs in the middle of screen, screen shows "Starting Windows" and then nothing.  If you look at the Windows 7 4-color 'flag' it continues to vibrate but nothing else happens.  I left it this way for an hour.  I tried reinstalling from the CD at least 4 times.

  But - I can do this: type Alt/F10 to the POST and I don't get a menu to change the boot with a training Path, Partition Options: 1, Hark disk: and then a note: [/ NOEXECUTE = OPTIN] if I press ENTER to continue, Windows 7 starts up normally.  IGet my desktop, icons and everything seems normal.  If I have a detour not with Alt/F10, then I'm back to the same blocked on Windows is starting up.

  Is this something simple like an editing tool that the Boot.ini file is missing?  I can't get any guaranteed help Acer itself.  But I hope someone here will know the correct procedure to get the boot to complete sequence.

  Thanks and I'll be standing.

  Hoib

  If your Advanced menu does not have a "Repair your computer" option, you will need a Windows 7 repair disk. You will need one computer working Windows 7 to make it one, if you do not.

  The ERD also has the ability to "Startup Repair".

  Good luck and let us know how you go!

• Invalid # license when upgrading from vista to windows 7 using hp W7 Home Prem upgrade disc

  Hello

  I bought your desktop at the end of Vista so I got a free upgrade to Windows 7, which made me send HP.

  However, until the last days vista was work fine.  When he had problems, rather than research the issue, I finally used Windows 7 Home premium upgrade disk from HP that I got for free weeks after I bought my computer.

  The upgrade went very WELL!  Until the end when W7 asked me my license number.  I entered the license number of Vista (which is the only one I have ever had - I have not received a license # with the upgrade).  Window 7 crossed the verifcation license and told me that my license number was invalid.

  I tried to discuss with HP, but the site won't let me that my computer is no longer under warranty.

  How can I go about solving this problem?  I have to call HP and get a license number or what?

  Dennis

  All,

  I solve this problem.

  Thanks for you help.

  Dennis

• Problem when upgrading from windows 7 to windows 10

  When I installed the free update for windows 10 on my win 7, he asked me to automatically install updates for her but I clicked on update later, I thought it was a minor update but my windows 10 of the language pack installation package has disappeared...

  My Installer went up 83% and something, then it restarted and when it started showed 0xc000000f problem and tells me to insert a disk installation and repair my computer, I don't have any drive to win 10 or win 7 disc, but I do had win 8 disk, so I booted my pc with him... and windows 8 works... bt every time my pc displays the message to choose an operating system and the os are windows 8 and another is the clumsy windows installation, when I click on windows 8 it starts normally but when I click on windows installation this old problem 0xc000000f takes place,... What should I do to get back on my windows 7? and I got win 7 in the recovery partition, the icon of recovery showed and I've never touched bt after that when I access win 8 and then access the recovery partition, is to show that the same amount of data, which is full of partition bt icon does not appear and nor my windows recovery tool 8 helps me to do or to recover?

  Hello

  If you can start with 8 Win Media and select REPAIR installation screen, you will get Repair Options...

  Select troubleshooting, then advanced... You MIGHT have an option for going back to a previous operating system...

  Another thing on the start menu...

  If you go into MSCONFIG... The STARTUP tab, you will probably see a list of which appears when you start your machine... There will be options to select one as the default...

  I delete anything again, until get you a better idea as to what is still usable.

• When upgrading from 278 to 296? which directory will be update?

  If I have hyperic 278 in/opt/hyperic/hq qnd upgrade to 296., IF I put the installation files 296
  hq2 say what directory after an upgrade will be the last. It updates files in the directory of the AC or it will put the new expandable files in hq2.  What directory I use now to launch the improved version of the hyperic?

  When asked for "Enter the full path of the HQ server to upgrade", you specify the directory of your existing installation. THIS WILL NOT BE CHANGED.

  Then asked for the "HQ Server installation path" specifying the location where you want the new version (based on the old version upgrade) must be installed. The server at this location is the one you want to start the post upgrade.