absolute difference of following frames

Similar Questions

• Selecting and keeping the following frames selected in Photoshop during the animation

  I want to add a star that moves with the hand of actors in a video. I have imported the video (10 total number of frames) and add the first image of the star and positioned where I want.  I know I need to move in the following picture to follow the hand of the actors in the second picture and so on. I also know that I can choose the 2nd Mount for the last image and move my new spread across these frameworks, so I cannot move the object of the first image positions - only from the second image (repositioning). My question is, there a shortcut or a way I can have say 2-10 frames selected, move the object, and then go to frame 3 without losing the following frames to be selected? It's a pain to have to select again the following frames.

  You can use Photoshop Tween option to have Photoshop images between images, but you want the star to cross existing frames. You may be able to use tween to generate the star moving images then add the hand moving layers in the frames where the layers of hand are lower in the stack of layers. that the mobile star layer. Photoshop would have no problem generating flames stars 10, that you need.  You know where the hands are in the context of the first and the last.

  I create the gif of 150 images by using two layers.  I create the first and the last images and Photoshop generates 148 frames between them by using the interpolation option.  The first image I create I move the JJMack layer 1 content up and off the power of the Web on the left. Note: Laye 1A a layer not coupled hide the mask layer 0 clouds so that he can prove through JJmack. The last image, I create, I moved the content layer JJmack 1 low and canvas to the right. Photoshop generated interpolation of 148 frames them.

  

  

• Help with element position fixed on the screen, with a difference to follow!

  Hi guys

  While I don't have any examples online, it will be easier for you and I want to help explain my layout.

  I have a single page site, with 4 sections vertically. Each section is a div to 100% width and a height of 1200px to fill screen of the user, and obviously, this div contains a lot of divs for content.

  Now in a section, I want my navigation bar to ADOPT the screen as it scrolls down but does not scroll in the section located below or above it. So I put the item Nav to have this CSS code:

  .hostingBackgroundWrap .nav {}

  Width: 150px;

  height: 100px;
  

  float: left;

  position: fixed;

  left: 0px;

  background-image: url(images/td_bg3.png)

  It works ALMOST well. It follows the screen down, he won't go in the section below when I scroll down... but it spread in the previous sections if I scroll to the top of the screen.

  Here is the CSS code for the .hostingBackgroundWrap just in case it is necessary, which is be more or less the same coding for each of the sections above and below.

  {.hostingBackgroundWrap}

  height: 1200px;

  Width: 100%;

  background-repeat: repeat;

  border-top-width: 0px;

  border-right-width: 0px;

  border-bottom-width: thick;

  border-left-width: 0px;

  border-bottom-style: solid;

  border-bottom-color: #30312F;

  background-image: url(images/bg_hosting.jpg);

  position: relative;

  Thank you!

  Can you please put to the top of your file online on your server and give us a link?

  What you want to achieve is called a "post-it". There is a pure jQuery plugin that will do just fine for your needs. Take a look here: http://labs.anthonygarand.com/sticky

• Unique black frame

  Hello

  For some reason any, when I start the capture process, the structure of loop of producer/consumer below gives me the first image as being black (empty) with all following frames works very well. I don't know exactly why it does this. Any input would be greatly appreciated. Thus, the framework before it collects information about the exhibition or the gain of the camera and how many images is to grasp, should not really affect the capture process.

  Konstantine

  

  Konstantine salvation,

  The reason why you found it is a problem with the data flow, you put an element in the queue until the copy buffer image is completed. Try to combine all the sons of the error in the upper loop to enforce data streams.

• Google follow-up follow-up vs of Adobe.

  I've seen this exact?

  Adobe Muse offers a follow-up to the webistes that they host?

  What would be the difference between followed Google and Adobe tracking?

  Hi elindo586,

  If you publish the Business Catalyst site, Adobe plans to follow-up to the traffic to the site.

  Yes, it's different Google tracking, you can read about the difference on the following link:

  difference between analytical report and bc of google?

  Kind regards

  Radi amin

• Frame and IFRAME elements?

  Sorry if the answer was posted... tried a search here, but no useful result. The fundamental question is:

  What is the difference between a frame and iframe?

  TIA

  S

  Am using a program that creates a gallery, to incorporate the Gallery, the idea was to use an iFrame.

  It's a good reason to use an iFrame.

  I use them rarely, but when I do it is for good reason.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• Supported HTTP/2 trailers

  HTTP/2 project-14 section 8.1. allows a frame to headers optional ("trailers") following frames of DATA in the HTTP request and response.

  https://Tools.ietf.org/html/draft-ietf-httpbis-http2-14#section-8.1

  This is necessary to support the implementations as Smoc in the browser (and future protocols built on HTTP/2).

  Firefox does support HTTP trailers or just ignore them? Thank you.

  Hi Alexander_Litus, I asked in the channel developer for the network component this topic...
  apparently trailers are not supported now in firefox (or rather ignored) - they not get read in order to maintain the appropriate State in the compressor of the header, but then they are simply thrown away.

• Made a decision: would you please help a PAO

  Hi, I am wanting to buy a new laptop and 71 who, at my age, maybe the last, I'll buy. I wish that the specification to be as good as I can get with a limit price of £1200. I think I narrowed down it to two models (Envy 15-as004na) and spectrum 15 ap007na. Both are models of 4 K. Both are approximately the same size and weight. Aside from the obvious difference of the spectrum being a 2 1With tablet mode, I see the main differences as follows

  Envy has PCIe SSD and spectrum M.2 SSD M.2

  Envy has 12 GB of ram DDR4 and spectrum has 16 GB of DD3 ram

  Envy has 52 WH battery and spectrum has 65WH battery

  Envy has two B & O speakers and spectrum quad B & O speakers

  My questions are

  1. how much faster the urge will be start-up with SSD PCIe?

  2. What is the difference between DDR3 and DDR4?

  3 can I assume that the larger battery will give better battery life (I'm not sure that I can go to claimed the life of the battery).

  4. as will be most of my listening with headphones Bose is there a difference between the models of speakers of 2 and 4 sound quality.

  I work a lot using Microsoft Office (spreadsheets and databases), but will use the machine more for watching movies (Netflix, which gives movies 4 K and Youtube and also Sky Sports average sky GB)

  It does not seem possible for me to go into a store to try computers because they do not stock these computers appear for demonstration purposes.

  Any advice would be appreciated. Thank you

  You want the tablet feature? I mean, if he wasn't so its replacement by a portable form factor standard for a form factor 2 in 1.

  The processors are the same and are very powerful. Same video chip. One is tactile and we're not. Both are IPS 4 k poster that will be wonderful, except in my touch experience tend to be a little muddy compared to not touch.  Both have 512 GB m2. Envy says expressly that's IS. Envy a DDR4, which is a bit faster and works on a lower voltage should thus extend the battery life. Both are 3 cell batteries, but the spectrum has more Watt-hour capacity, so you have to assume there's going to be the longest running.

  I would say that envy will run and start more quickly. Not much. Even a M.2 SATA is very fast but the NVME (aka PCI-e) is like instant - on. I have the new spectrum "the thinnest in the world" which has a PCI-e m2 memory card and it is literally instant - we. My previous laptop was a Lenovo Carbon X-1 with a SATA m2 and it was close but not exactly instant - on.

  For what you say you will do, I would say either of these laptops is exaggerated and frankly it boils down to how you want the ability to have a tablet form factor. Envy is a little more durable due to DDR4 memory and PCI - e disk.

• The moving average of the data file

  Hello

  I'm doing a Subvi, which has jumps in the data points.

  The algorithm:

  -build an array of samples (of size round(FPS/2))

  -Take the average

  -subtract the data of the table of average points: = absolute difference (medium-sized data point).

  -compare the difference threshold: If difference > = point, then add 1 to the counter.

  The Subvi (jump detect) is intended to be used in a larger vi, and I need to make sure that it works. But it doesn't now.

  When the vi works and everything is calculated, it does not count the jumps that are visible on the ground.

  Any ideas what I am doing worng?

  Thank you

  The exsist problem in your loop in your Subvi. At this stage you are iterating FPS/2 size of the array, and you only show the last value of all of your calculations. Unless the last value is reported as a jump, it will not be saved. You can easily fix this by putting registers at offset on your loop for, the only question is do something with your Boolean indicator. You can index the Boolean values, and then make a chart or works, but this part is up to you.

  

• FPGA time off sistematically

  Hello

  I use 2 targets to host FIFOs DMA to transfer data acquired to the PC host (see photo).

  In the FPGA vi, whitin the while loop, I use a wait (in microseconds).

  Regardless of the "dt" given this expectation, in the home value I remember in time data with a systematic error:

  each 10 points, the time elapsed is not dt but (dt + 1 microsec).

  A small mistake, it becomes significant when dt should fall below 10, because I need and complicates the analysis.

  This behavior is always the same, not random (I get 10 good 'dt', then a dt + 1 microsec, and vice versa).

  I wonder if I did something wrong or if it's a problem.

  Thank you

  You should try using a Structure of sequence:

  

  By the help documents:

  To manage delivery rates with the Express VI loop Timer, set loop Timer Express VI in the first image of a flat sequence or stacked Sequence structure and put the rest of the code in the following frames.

  EDIT:

  You should also note that the first iteration may be turned off.  There is nothing that can be done about it (from what I understand).  But after the first loop, each execution else will follow very strictly to your timing chosen by the VI Express loop Timer.

• Measure of angle from XYZ positions

  I made a 3D particle tracking image. It is (in this example) 17 tracks including the point of start in 0,0,0 (XYZ). Some of them didn't start the part of track (tracking problem), but it is not serious.

  
  I also have a digital picture with any XYZ positions for each particle in the following frames. Now my question: is it possible in LabView to measure the initial angle (start) for each track of the first 10 frames (1-10)? On the photo above shows could be an angle for part of the beaches marked in red. There are only the initial angle, another part of the beaches is not bad actually.

  
  Greetings to you.

  OK, it is not too difficult.  You have a point P (I will choose 20, 34.5, 20), origin O (10, 10, 10) and you want to know the angle between the line of origin upside (call this OP line) and the line that is the projection of OP on the plan through the origin XZ.

  Let's start with the passage of the origin 0, 0, 0.  We do this simply by subtracting O p, which gives us a new point P' = 10, 24.5, 10.  The point on the XZ plane is simply P' with its component is returned to zero, 10, 0, 10.  Since our origin is (now) to (0, 0, 0), points P' and the projection of P' also represent vectors from the origin (that is, they are 'lines').

  We now use the fact that the scalar product of two vectors is simply the product of the length of the two vectors times the cosine of the angle between them.  I assume you know how to calculate a scalar product (if not, there is a function "Dot product" practical mathematics, algebra linear subpallet) and the length of a vector (vector Norm, even under Palette).  The division, take the arc-cosine, and you should get (approximately) pi/3 (I took 24.5 = 10 * sqrt (6) I figured it would give me this angle).

  If you write this as a Subvi with particle XYZ and XYZ origin (2-3 items 1-D tables) and Theta as output, you can put this inside a loop For that subscribe to all of the 2-D array of particles and the only original value and it will return an array of Angles.

  I hope it's clear.

  Bob Schor

• Judgment of Compatibility Mode

  I have problems to read the Yahoo and Big Fish Games Games.  Everything is little someone can help me understand this problem?

  Hi Ripkat1,

  (1) what hear you exactly by "Break compatibility mode" in the title of your son?

  Your screen resolution settings can contribute to your display of game issues. Follow the instructions below to adjust your resolution to screen for Windows 7.

  1. from your desktop, right-click and select the screen resolution.
  2. set your screen resolution of 1024 x 768 (or more), and then click OK.
  3. open your game again

  If this doesn't make any difference, then follow the article from the link below Big Fish.

  http://bigfishgames.custhelp.com/app/answers/detail/A_ID/1100

  Hope this information helps.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my Windows XP Professional is not nothing download at all. help please

  my system is nothing download at all

  Hi Matthew81,

  ·         What happens when you try to download?

  ·         You receive a message?

  ·         You are able to go online with no problems?

  ·         Are you using Internet Explorer?

  Follow the steps listed below if you are using Internet Explorer.

  Method 1: You can run the next Fixit tool and see if it helps.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• Help with Windows XP. Your security settings do not Web sites to use ActiveX controls installed on your computer.

  Original title: help with Windows XP.

  I have a laptop with Windows XP. When I try to go on homepage e-mail he says I have no internet connection, even if I do. Also, I can't run windows update. A pop up as my security settings will not allow active x but don't give me any option to change as I've seen it before. I tried everything I can think of.

  Hi SteveKey,

  ·         You use Internet Explorer to access these sites?

  ·         If so, which version?

  Method 1: Run automated troubleshooting and check if it helps.

  Improve performance and security in Internet Explorer

  Method 2: Check to see if the following is useful.

  a. open Internet Explorer.

  b. Select tools, then Internet Options in the menu at the top of the Internet Explorer window. The Internet Options window opens.

  c. Select security from the list of tabs at the top of the Internet Options window. The Security tab appears.

  d. click on the custom level button. The security settings window opens.

  e. scroll down to download signed ActiveX controls entry and select the quick option.

  f. scroll down to Run ActiveX controls and plugins entry and select the active radio button.

  g. Select the OK button to accept the changes. You may have to restart Internet Explorer for the settings to take effect.

  Method 3: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try

• network location detection. Failed with error 0x8007007E: the specified module could not be found

  Using the internet connection at home:

  Identification of network adapter

  Error failed with error 0x8007007E: the specified module could not be found

  Hi JimQv,

  Check to see if the following is useful.

  Method 1: Run that this automated convenience store and look for the question.

  Improve performance and security in Internet Explorer

  Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.

  Internet Explorer is slow? 5 things to try