Computer Dell won't start windows xp

Similar Questions

• My computer just won't start in safe mode...

  My computer just won't start in SafeMode... after the signs up to 'safe mode' and pushing enter... it stops (no signal) and normally restarts itself! I need to get rid of malware and infections in the start up... hmmmmm

  First, run a full scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If nothing detects remove, also try run system restore and your system at a time before the problem happens.

• Update won't start windows

  Startup Repair lists autofailover and badpatch after that update won't start windows and not repairable auto. How to start to remove the last update?

  Bob

  http://bertk.MVPs.org/html/safemodevista.html

  http://bertk.MVPs.org/html/restoresysv.html

  If sytem restore fails, try

  http://bertk.MVPs.org/html/recovery.html

  When you are running manually Morphix updates one at a time. You need to know what update is the cause of the problem. Before you post a list updates so that a check can be performed as to if there are known problems.

• laptop won't start windows xp up.error win32k.sys?

  My laptop won't boot windows xp, to ask if I want to start windows normally or with guests orders or network in safe mode. According to what I try nothing works. It says: an error has occurred with win32k.sys. What is - this and how to fix it?

  Claire

  As you probably know Evesham closed to the public in 2008.

  I think that your computer is a portable computer. I can't access a free copy of the manual, but I imagine that you have a copy of the operating system on the hard drive in a recovery partition. Am I wrong?

  Before attempting to repair your computer, you will need to back up your data files on removable media. If the computer does not start, you need access to a second computer at home. Do you have a? If Yes is it a desktop or a laptop?

  I would also ask if you comfortable using a screwdriver to remove the hard drive of your laptop Evesham, put it on an external support which can be purchased via Amazon and its connection to a USB port on the second computer. These are not difficult tasks, but not everyone wants to take on this task. If not comfortable take your laptop to a local computer repair shop.

  As for the repair of your laptop once you have recovered your data files, restore the operating system to factory settings using the copy of Windows XP, which I think is more than likely in a recovery partition. It will be activated by single key, perhaps the F10 or F11 key or you can have an option in the menu that appears when you press the F8 key during the boot process. It also seems that Evesham commonly supplied recovery discs.

  If a factory restore does not work I would then test the memory.

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• HP G62 Notebook Pc: MY COMPUTER LAPTOP WON, T START

  my laptop won, t start when I press the button nothing! It doesn, t start

  Tell me please help me

  With most HP laptops the first thing that do is to unplug power removed battery and push and hold the power button for 15 to 30 seconds to reset the machine.

  After you have done that reset for the power back in and try again, sometimes get you lucky.

• Computer Dell laptop, OS preinstalled Windows 7 does not start. Error: PXE - E61

  Original title: Failure to Boot to

  Computer laptop Dell, OS of Windows 7 pre-installed. No disc restoration/reformat/install for 7. (This is bullcrap if you ask me). Does not start. Error: PXE - E61: Media test failure, check cable PXE - M0F: out Broadcom PXE - ROM

  What should I do here?

  See if there is a solution here: http://hubpages.com/hub/How-to-Solve-PXE-E61-Media-test-failure-Check-cable-Error

  J W Stuart: http://www.pagestart.com

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP keeps hanging on the "application of the parameters of the computer" and won't start

  All of a sudden, one of our computers on our network starts. He remains stuck at the application of the computer settings. I tried to take the network cable and reboot and it ends up getting stuck on loading personal settings. I tried to start in safe mode that happens to the logon screen, but it does not accept my username and password. I can not connect to the computer at all to change the settings. Does anyone have an idea on how to get around this problem?

  Thank you
  Paul

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Toshiba Windows Vista operating system to start, Safe Mode doesn't work anymore. How to save the personal data of the computer that won't start.

  I have a Toshiba laptop with windows vista: the OS home.

  Recently, the operating system wouldn't start up, there will always be on the page of the logo 'miscrososft society '.

  I tried F8 to start safe mode, safe mode started but will load some files and stay on this page forever.

  I tried to run the system repair, the report is as follows:

  Signature of the problem:

  Event name: Startup Repair V2

  Signature of the problem 01: breakdown car

  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000

  03:6 problem signature

  Signature of the 04:851981 problem

  Signature of the problem 05: corrupt and registry

  Signature of the problem 06: corrupt and registry

  Signature of the 07:1016 problem

  Signature problem 08:3

  Signature of the problem 09: Rollback register

  Signature of the problem 10:0

  Signature of the 11 problem: 6.0.6001.2.1.0.256.1

  Signature of the 12:1033 problem

  I tried to use system restore, but he says he has not found a moment of restoration which is good.

  The main concern right now for me is to get my personal data and files on the computer.  I still have another computer to use, so I'm not so worried about starting the computer.  I want to find a way to the first backup of my personal data and files from the computer to external devices, then try to repair the computer.

  Thank you.

  Hi DreamMeng,

  You can try to use third party software to back up data and check.

  You can use your favorite search engine to navigate on the third-party data backup software and that the software allows to save data.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also make contact with the Local Techshop for assistance to the protection of the data.

• Computer takes forever to start (windows 8)

  Until recently my phone has taken an hour or more at the start (and I'm pretty sure it takes a lot of time to stop but that doesn't bother me). When I hit the power button / I hear the fan or something when I put my ear close by, but all lights only stays on for a few seconds and then I don't hear it anymore. My computer will simply if sit like a black screen... as the monitor is asleep or something, suspecting he was asleep I tried to hit the SPACEBAR several times to wake up but no it doesn't. . After what seems like years, I finally see the lenovo loading screen and it starts up fast from there. I tried to run ccleaner, tried to make a record of cleaning / optimization, I scanned for virus/malware, I fiddled around in the boot parameters by running 'msconfig', disabled some startup programs and nothing I tried worked even. I go GeekSquad.com and they tried to help me remotely and they said that "it seemed that I just needed a good tuneup", so if any of you know what they do to optimizations that could be useful and I can try to do it myself.

  When I go on the start with Ctrl Alt Del menu it says my last time of bios is about 2.8 seconds

  I guess I can give you the specs of my computer just to save time incase someone asks:

  Lenovo IdeaPad N580

  Windows 8

  Processor: Intel Pentium CPU 2.20 GHz 2.20 GHz B960
  Installed memory (RAM): 4.00 GB (3.87 GB usable)
  System type: 64-bit, x 64 processor operating system
  Pen and touch: no pen or no key is available to view

  It would be great if someone could try and help me, thanks!

  Hello

  Check with support from Lenovo, their online documentation and drivers, diagnostics and ask
  in their forums on known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/

  =================================================

  These should help:

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  How to speed up your PC
  http://support.Microsoft.com/kb/2746761/en-us

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My PC won't start Windows after I used it to work from home

  New software has been installed on my HP Pavilion G6 to allow me to work at home home. Now I stopped the work and my PC cannot start when starting. She's just a black screen and I can't get to Windows. How can I go back to Windows? How do I get this software and Boot up to the Windows STARTUP?

  Hey RobVanEna,

  You can try to perform a Microsoft System Restore. A Microsoft System Restore will only put you back to an earlier date and it won't affect your files (except files/files saved directly on the desktop). Please note that this is different from a recovery. A recovery will be programmed the laptop back to factory conditions, and you will lose all data on the hard drive that is not backed up externally.

  Check out these instructions on how to perform a system restore. There is a lot of information at the top that you'll want to read later. In the blue link at the top of the document list, click "using System Restore when Windows 7 will not start normally.

  If the system restore fails for some reason any, let me know. It is advisable to try a few different dates so does not work.

  Please let me know if you have any questions or if this suggestion helped (May) help others with a similar problem. I'll keep an eye out for your answer.

• Computer Dell won't boot Strike F1 to reboot, F2 for Setup

  After his return from a trip of two weeks, I turned on my computer that had been totally disconnected during this period. Everything seemed fine. There were several automatic updates. There is also a (not automatic) update which was to "correct a problem of communication between the computer and the HP printer. I downloaded and installed. Immediately after that, I got an error message. I don't remember what he told (because it was 23:00 and I had been driving all day), but he said that if the problem persists, you should disconnect (printer/scanner/copier). I tried to restart. Now, all I get is a screen that says "Strike F1 to reboot, F2 for Setup". Pressing F1 does nothing except fact by repeating the same screen. Ideas for an easy solution? The computer is a Dell with Windows XP.

  Hello

  Follow the steps from the link below and check to see if this helps: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

• Inspiron 6000 - won't start Windows - Blue Screen of Death - the hard drive is Toast! Help me!

  I have a Dell Inspiron 6000 2-1/2 years, with XP Media Center.  Last night at the start, he went to the Blue Screen of Death.  I tried to restart about 10 times, each time by selecting a variety such as 'use last known good Configuration, Safe Mode, Etc.' nothing works.  Get to the point where the windows flag is waving in the wind (may be waving goodbye?) and then hangs at Blue Screen of Death.

  To make matters worse, this is the only hard drive, I have not saved for a few months and I can't seem to find my recovery/boot drive... I swear to you that I made a copy when you are prompted 2-1/2 years ago?

  in any case, I started press F12 and got to the dell diagnostic interface.  I ran the tests in the Section of the blue screen, and almost all categories of hard drives contained errors.  I tried Googling some of them and almost all of the shots indicate disk hard death is imminent.

  So, anyone have any ideas how I can:

  1 retrieve the data

  2. get Windows transferred to another hard drive (without having to buy a whole new copy)

  Any help is appreciated deeply... only 3 weeks until final and just lost a huge amount of assignments for my grad. school...

  Thank you

  Aaron

  
  

• Windows 8 lenovo bookno net dvd rom won't start windows, still trying to repair disk errors

  , I like the oem license is stored in the bios, how can reinstall windows with disc or usb

  Hi all the success possible,

  After finding that windows 8 is wired in the Bios and that the media is now the manufacturer I dug in the Lenovo Web site.

  The computer shop I took it to could not diagnose the cause of the other that a defective hard drive old 2 years priming scrap the laptop and waive the fees of consultants £25.00.

  Fortunately, I refused, released and after that audit on the lenovo Web site found that the option of repair on the lenovo is wired with a hidden in the drive partition.

  So with a simple turn on and outside while pressing the small 15-minute Windows 8.1 reset button has been restored and is now currently update itself to windows 10.