I can't start my pc. Error: Microsoft Mobile Pc presentation adaptability Client has stopped working

Similar Questions

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

  I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

  Gary

  The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

  The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

  When you have done this, place you and double click on the correct catalog and LR should then start OK.

• CS4 components stopped working. Error 150:30 - license for this product has stopped working. How can I fix it?

  Last week, I had to wipe my hard drive, reinstalling OS X 10.10.4 (then update to 10.10.5) and restore all my files. I do not often use the CS4 but I needed to open Dreamweaver CS4 just now and all first, he wanted Java Runtime 6 - that I found and installed. Now I get the 150:30 error message: a license for this product has stopped working. I have the SN of the project - it is registered. But I can not get Dreamweaver or Photoshop (or any what other applications in the package, I guess) to run. What should I do to remedy this? As I said, I do not often use CS4, but sometimes I have to get to some old files using Dreamweaver and Photoshop. So, I want to make it work.

  Hi judith,

  Please try the following steps: error "Licensing has stopped working". Mac OS

  Best regards
  Maurice

• Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working

  I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve.  I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).

  However, the problem persists.  While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.

  I tried every solution I could find on the web, namely:

  • Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
  • My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
  • Delete the Intellisync folder
  • Run scanpst on my Outlookpst file
  • Clear the entries of calendar on the Blackberry (temporary solution only)

  The latter is the only approach that has produced no results.  If I delete the entries on the Blackberry, the

  process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch.  As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.

  I'm several months and both handsets of BB has invested in this issue now.  I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB.  Type of defeated half the point of a blackberry...?

  Getting desperate here.  Help is appreciated.

  Brad

  Hello Brad!

  I had the same annoying problem that you guys have described here.
  After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!

  Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".

  I did it and now everything works perfectly.

  I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.

  I hope it will work for you also.

  Kind regards
  Steve

• Cannot start my old Photoshop CS4. Error: 150:30 license for this product has stopped working

  I can't use my PS CS4 because it seems that licensing has stopped working. I restarted the Mac several times, but this error seems to persist.

  This is a very common mistake with CS4. This means that the licensing is broken. For people not really be aware of Terminal, my best answer is to suggest a new installation of your disks to solve this problem. You need to reapply the updates.

  From the help > part update does not work well, to download and install your updates (Photoshop, Bridge, Adobe Camera Raw) from here, product updates.

  This happens usually when Photoshop is moved to another computer, from a backup as Time Machine, or even OSX Upgrade to Yosemite.

• From time to time I get an error message pop up saying "Windows Explorer has stopped working"

  Original title: Windows Explorer

  Occasionally I get a pop-up box saying "Windows Explorer has stopped working" another "Windows Explorer restarts? -for example. Control Panel - change background. What can I do?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• CD read - Error Message: Build with Autorun CD Studio has stopped working.

  I am running Vista and have had no problems reading CDs or DVDs.  However, I have a CD of my teacher built with Autorun, who will not play on my computer.  I tried 2 different copies without success, but the 2 same CDs play on all computers in the school and on the computers of the other students.  I have Microsoft Powerpoint and Word, that are required to read the files on the CD. When I insert the CD, I get the opening menu, but when I try to select any specific topic, I get the error "Build with Autorun CD Studio has stopped working" message.  I have downloaded and run the Microsoft FixIt! Program diagnosis/troubleshooting of Microsoft Support, but he could not find any problems.  I need this CD for upcoming classes and don't know what to do?

  Hi pinkpugsy,

  1. are you able to browse the contents of the CD using Windows Explorer?

  It looks like Autorun CD Studio program is defective. We recommend you to uninstall and reinstall the Autorun CD studio software on your computer and check the difference.

  Note: before you remove the software, make sure you have the Setup file of software with you.

  Step 1: Uninstall or change a program
  a. see Uninstall or change a program
  b. Once you have uninstalled the program, restart the computer.

  Step 2: Install the Autorun CD Studio software. Once you have installed the program, restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DV7 error when viewing of images: "COM Surrogate has stopped working".

  Hi, I got a new replacement laptop (Pavilion dv7-7008tx with Windows 7 Home Premium 64-bit) HP last Friday, June 8, and I find that when I browse through multiple images in the Windows Photo Viewer I invariably get the error 'COM Surrogate has stopped working. Windows is checking for a solution to the problem... "I close the window and reopen and it is fine. This does not happen with specific images.

  Problem solved. I went on HP Live Chat support and the technician gave me the download links to updates to the graphics driver, which solved the problem.

• error 150:30 Liscencing for this product has stopped working? Mac only loaded with elcapatain

  

  Any help would be appreciated thanks

  See error: "License has stopped working". Mac OS for instructions on how to use it.

  Link to the download tool:-Adobe licensing repair tool.

  Kind regards

  Assani

• Microsoft Explorer Mini track blue Mouse has stopped working

  The mini track blue mouse worked fine and then just stopped working.  I tried to turn on/off the mouse and restart the computer.  I am running Vista.  Any ideas?

  Hello
   
  Do you remember any change to your computer?
   
  I suggest that you follow the steps below and check if that helps.
   
  Step 1:
   
  Follow the steps mentioned in the article below and check if any method to solve your problem.
   
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
   
  Step 2:
   
  If the methods in the article made little assistance, I would have you perform the System Restore point that your mouse works fine.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: "Evented i/o for V8 JavaScript has stopped working"

  Someone had this problem? Anyone know what is causing the error?

  This has happened the last couple days now.  There are still a number of messages from forums with no fix from Adobe on this matter.

  Re: Indesign: evented i/o for v8 javascript stopped working

  I saw this when, indesign or photoshop is open, and the problem started when the update of the Adobe Creative Cloud application.  This will affect hundreds of users spread across several companies, I was successful.

  I managed to stop the error as follows

  renamed node.exe to node.bak in the following locations:

  C:\Program Files\Adobe\Adobe Photoshop 2015\ CC
  C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CCLibrary\libs\
  C:\Program Files (x 86) \Adobe\Adobe Creative Cloud\CCXProcess\libs\

  Waiting for fix appropriate from Adobe like this is a widespread problem.

• Microsoft Picture It Publishing Platinum 2002 has stopped working.

  Original title: Picture It Publishing Platinum 2002

  I love this program and want to continue using it. I upgraded my old computer from 98 to XP, and it ran very well! I had to get a new computer and'm running XP Professional. The program loaded fine but whenever I try to put in place a project or just image, it stops working! Have found several articles on the downloadint files to fix (PI19299.exe, as well as the Ko scid EN US 316861). Tried to download the two and apparently neither one is now available. Please help me. I can't find other programs that will allow me to do what PIcture It will make! Can't believe there is no way to fix it. Why in the world MS would not continue to let people to run this program? Very frustrating!

  Hello
  OK you have downloaded and installed the patch... should I do exactly the same thing in the same place as before? Be as specific as possible with all the details.
  B Eddie

• I get an error message that says the service TFTP has stopped working. He said that Microsoft has detected and RPC virus on my computer.

  It is said there is a solution available, but the solutions don't make much sense to me. Ive has run a virus scan and nada. I need help.

  Hi Momoftwins,

  Try the suggestions in this post to see if it can clean the virus.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Hope this helps, good luck.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Windows search protocol that Host has stopped working

  Application name: SearchProtocolHost.exe

  Application version: 7.0.6002.18005

  Application timestamp: 49e0244d

  Fault Module name: curslib.dll

  Fault Module Version: 6.0.88.4

  Timestamp of Module error: 4b1cca69

  Exception code: c0000005

  Exception offset: 000062b 9

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  I don't see anything on there office that includes the menu star clock taskbar icons trash his all Blacks

  Hi bsebllking23

  Thanks for posting in the Microsoft answers site!

  You can try to reset the Indexing Options to a new start by removing and rebuilding the index.
  Your index requires virtually no maintenance. However, if the index find the files you know problems must be located in an indexed location, you might need to rebuild the index.

  To rebuild the index:

  1. open indexing and search by clicking the Start button Options, click on the Control Panel, clicking system and Maintenance, and then clicking Indexing Options.
  2. click on Advanced Options, click the index settings tab and then click on rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  See the link below for more details:

  Improve Windows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  See the link below for more information on troubleshooting problems with the research:

  The problems with the search
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  You can also check out the msdn below link for a similar problem and see if that solves the problem:

  http://social.msdn.Microsoft.com/forums/en/windowsdesktopsearchhelp/thread/53f6e6e0-89F0-47D8-A812-3a7d7c7e4c63

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support