Access connections 5.02 disables Wifi

Similar Questions

• Support - disable ThinkVantage Access Connections - 3000 N200

  Hello everyone,

  How can I disable ThinkVantage Access Connections, so that I can use Windows to configure wireless.

  Any help much appreciated.

  Thank you

  KeepGreen.

  If you don't, you can uninstall in Control Panel... If you want to temporary disable it, go to bootmgr to search on your hard drive under the start menu, and then clear thinkvantage access under list of startup programs.

  Or if you are using Vista, go to control panel, defender of windows-> tools-> software-> show for all Explorer users-> disable Thinkvantage access.

• Is there a troubleshooting guide for the connection of DSC-RX100M2 WiFi?

  Try to send a picture to my computer via the WiFi does not work.

  Of playback mode, when I select the menu option 'Send to the computer', the camera connects to the WiFi access point and then, is never able to connect to the computer...

  Name/group of computer job information been defined previously in the camera via USB with the help of PlayMemories House.

  After expire tries to connect to the computer, the reports of the camera that he was able to connect to the access point but not can connect to the computer.

  I already tried things

  (Please read this instead to suggest that I have try this... again)

  • I tried viewing pictures on a TV which is on the same network... and that works.
  • I tried to send photos to a "smart phone" (actually an android Tablet) connected to the same network... and it works.
  • I do not use the Windows Firewall so that the changes you home PlayMemories try to the firewall configuration Windows are not relevant.  So, I added some firewall rules for firewall, I use (Comodo) to allow incoming traffic on UDP and TCP protocols on ports 1900 and 2869 (as suggested in another post on this forum titled "Sony WX200 cannot connect to the computer via wifi".  I know it's another camera, but I guess the end of PlayMemories of the connection must use the same ports, etc..
  • I tried to connect with the products of firewall (Comodo) and the Windows Firewall completely disabled both.
  • I tried to restart the PMBDeviceInfoProvider service after the firewall rules have been added and then tried to connect the camera again, but always failed to connect.
  • I tried to restart the PMBDeviceInfoProvider service, while all products of firewalls have been disabled and then tried to connect the camera again, but always failed to connect.
  • I have temporarily stops the service of PMBDeviceInfoProvider and a simple http/web server (tiny Java Web Server - http://tjws.sourceforge.net/) port 2869 on the computer where PlayMemories Home is installed.  Then, using a web browser on another computer that is connected to the same WiFi access point that the RX100M2 camera, I was able to connect and get the default page of the web server.  If failure of the camera of the connection does not appear to be caused by a TCP connection failure and 2869 port is not blocked by the firewall.

  It does not appear to be any technical documentation or correct this information available about how the camera identifies and finds the computer, or what else can stop him from connect.  I speculate that it uses a UDP (port 1900) "broadcasting" of the PMBDeviceInfoProvider to allow the camera to find the computer.  I suspect that the "cannot connect" problem could be related to whether the wireless access point allows the UDP packets from the WiFi "side" of the wired/ethernet 'Coast' but I have no way to test or prove that, or even enough Sony documentation on the issue of whether it is a reasonable thing to try troubleshooting.

  If it gives anyone else having the same problem any ideas that lead to discovery, where it fails, please share.  If there is someone at Sony who knows what might be the cause of failure, please answer.

  Another thing I noticed is that a MTP IP device appears in Device Manager when you attempt to connect the camera, but it was not the name of camera model. I tried to uninstall the generic driver from "Device IP DPW" (right click and uninstall in Device Manager). The next time I tried to connect the camera, Windows RE-load the driver and now, it appears as DSC-RX100M2. So, I have evidence that the camera is now to find the computer, but it is yet to transfer all the files from the camera.

• Super large icon access connections

  Is there a reason why the Connectioins Logo to access is as big as the battery icon and is posisitoned immediately to the left of the battery rather than be a small regular icon in the taskbar as the rest of my icons?

  Altoid666 wrote:

  Is there a reason why the Logo of logins is as big as the battery icon and is posisitoned immediately to the left of the battery rather than be a small regular icon in the taskbar as the rest of my icons?

  You can disable the gauge AC - start Access Connections - switch to Advanced mode - click Tools - global settings - click on notifications - uncheck "show the tonnage of logins in the taskbar.

  You can enable 'the status of connections access in the taskbar icon' at the same place.

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• Windows Vista calendar says access denied... disabled?

  Windows Vista calendar says access denied... disabled?

  jpdodson,
  Thank you for visiting the Microsoft Answers community forum.

  What just happened recently?  It worked before?  If something has changed on your computer as new hardware, installed software or updates applied?

  Search for system files corrupted and then try a restore:
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  If you still get access denied, try to temporarily disable the user account control:
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
   
  2. click on Turn User Account Control on or off.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  3. Select the use User Account Control (UAC) to help protect your computer check box to turn on UAC, or clear the checkbox to disable UAC, and then click OK.
   
  Let us know if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• M425dw - disable WiFi, don't turn off WiFi

  Hello

  We have a Laserjet M425dw in one of our offices. Works well, only we want to disable WiFi because we use a cable to connect it to our printer/network server.

  We have disabled the WiFi but it keeps broadcasting its SSID, it is a major security risk, someone could hack his way into the printer, and from there, in our corporate network, which we don't want.

  Update to the latest firmware does not help, its still sound broadcasting SSID. If I set this setting to "Off", I want that he turn to physically!

  Thought, if this can help to upgrade the firmware to a 425dn in it, like those who do not have a WiFi module, do not know if this will kill the good printer.

  Another solution is to return this printer and get a 425dn instead (we already have about 10 of those running in our society, a total amount of printers that we have running is 86, 90% of which are HP).

  Any thoughts?

  Thanks for the reply!

  I scanned with WiFi several software of scans and cannot find the SSID, I tried the WiFi Analyzer and WiFi Console WiTuners on my Android phone and WiFi on a laptop Xirrus Inspector. Placed the laptop next to the printer and couldn't find the SSID is broadcast, I would say that this one is solved

• ThinkVantage Access Connections for Windows XP on G41

  I use a 2886-5TU G41 and I really screwed up.  I was cleaning my registry and it is a mess.  I lost all network connections, and they are not recoverable.  I reinstalled the software wireless and ethernet.  Device Manager reports the wireless card and Ethernet work.  But I can't connect what either as utilities connection - windows and IBM are corrupt.

  I d/l the 83cx71ww.exe and followed all the instructions.  I reinstalled sp3, hotkey upgrade, NET 4, upgrade of power management before you install the dial-up connection.  Now, when I boot the message I get is that ThinkVantage Access Connections will not work on this system.

  Y at - it somewhere that I can d/l the original supplied with this laptop for connections, files card WiFi and Ethernet card?  The latest just will not work.

  Thank you

  Carl

  Well, it's now a moot point.  Windows was all simply too altered by me and required a reinstall.  I just did.

  Thanks for watching all the.

  Carl

• Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Here you will find a way how to activate your iPad If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• How does a customer preform connected to an extensive WiFi hotspot using Ethernet?

  How does a customer preform connected to an extensive WiFi hotspot using Ethernet?

  It performs like any other wired device that is connected to an Ethernet port. However, in the case of a WAN, the unit that plugs into the Ethernet port on the extended base station will only get that fast of a signal that the connection between the "main" and "extended" base stations.

  In other words, if you use wireless to connect to the extended base station, there will be a loss of at least half of the potential speed wireless on the network.  A device that plugs into the Ethernet port on the extended base station will get this same speed.

  In order to maintain top speeds on the network, the main and extended base station must be connected together using wired Ethernet wired, permanent.

• Can you connect two cable on wifi networks?

  Basically, I'm trying to build it.  It was much easier in photoshop than to the fact of installation.

  

  There are many features, some wired, some wireless.  I ran son where I can run threads, but it's a bit more difficult that I thought for a domain.

  Basically, I need to connect two wired over wifi networks.   The 2nd must share this wifi via ethernet. (I can exchange picture 2 and 3 if necessary)

  There are also two 4-port switches in the mix for the NAS in the basement and other devices connected.

  Everything works the latest firmware. All computers on the network are running 10.11.4 Mac

  Can you connect two cable on WiFi networks?

  In theory, Yes.  In practice, not if you work with image, video files or other media.

  Honestly, it's a big House of cards, and even if it does not, it will be very SLOW... Since everything will depend on a connection without wire between Imagine and Imagine 3... and wireless will be much less bandwidth of a wired connection, not to mention the much less reliable than a wired connection being.

  If unfortunately, the bottom line here is that a professional, or even a good amateur would never has something like this.

  There are some other questions to ask, but by far the most important would be... is it possible that Imagine and imagine 3A connect using a wired Ethernet cable connection?

• TVSU v.5.98 access connections

  When running system update, I received notification that a new update of the Access connections

  v. 5.98 was available.

  When downloading from v.5.98 to 90% through the download process, I received

  a niotification the download failed.

  My current version of dial-up connections is 5.97

  All other system updates are underway.

  Any suggestions?

  Thank you

  Altoid666

  Problem solved...

  Downloaded v. 5.98 logins this AM and installation

  performed correctly.

  Altoid666

• Satellite M100-221: unable to connect to the home WiFi AP

  Unable to connect to the home WiFi AP. Impossible to establish connection (when using intel software Bundle, connection hangs on the authentication step.
  When using the connection and windows engine, it connects 3 times will come down on "acquiring network address").

  I downloaded and installed the latest drivers and updates to the BIOS, but it does not solve the problem. Other computers with equivalent settings to connect without any problems.
  Wireless AP DLINK 1000AP + type b Wi - Fi.

  What is the problem?

  Hello

  When I have this kind of problems, sometimes by turning and the AP help.
  Or try to change the authentication or encryption settings.

  Good bye

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• HP laptop - 15-f387wm: try to connect to the hotspot wifi from comcast I get ~ wifi doent have an ip address of vald

  Trying to connect to the hotspot wifi comcast I get ~ wifi doent have an ip address of vald. But only does

  This wifi connection. All the others are fine. Anyone has the same problem or maybe a solution? Thank you

  everyone. Good useful things on this forum...

  linv

  Sorry, do not use Comcast (or Xfinity - their new name!), but this info on their website leads me to believe that you must download and install the security profile to use their hotspots: http://wifi.xfinity.com/?CMP=KNC-IQ_ID_sEG2mI6Pa-VQ2-g-VQ6-107412918689-VQ16-c-pkw-%2Bcomcast%20%2Bwifi%20%2Bhotspots-pmt-b-slid--tid-17589yuy33248-

  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.