TVSU v.5.98 access connections

Similar Questions

• Super large icon access connections

  Is there a reason why the Connectioins Logo to access is as big as the battery icon and is posisitoned immediately to the left of the battery rather than be a small regular icon in the taskbar as the rest of my icons?

  Altoid666 wrote:

  Is there a reason why the Logo of logins is as big as the battery icon and is posisitoned immediately to the left of the battery rather than be a small regular icon in the taskbar as the rest of my icons?

  You can disable the gauge AC - start Access Connections - switch to Advanced mode - click Tools - global settings - click on notifications - uncheck "show the tonnage of logins in the taskbar.

  You can enable 'the status of connections access in the taskbar icon' at the same place.

• Support - disable ThinkVantage Access Connections - 3000 N200

  Hello everyone,

  How can I disable ThinkVantage Access Connections, so that I can use Windows to configure wireless.

  Any help much appreciated.

  Thank you

  KeepGreen.

  If you don't, you can uninstall in Control Panel... If you want to temporary disable it, go to bootmgr to search on your hard drive under the start menu, and then clear thinkvantage access under list of startup programs.

  Or if you are using Vista, go to control panel, defender of windows-> tools-> software-> show for all Explorer users-> disable Thinkvantage access.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Access connections 4.52 tries to authenticate until the user logs

  We have a large number of computers laptop R61 and R61i on our field. How they are to connect to the network is the Windows login screen appears, the user enters his user name and password, THEN access should try to access the network and connect.

  Now, we have a few computers that start at the login screen but before the user can enter their credentials, logins continues its merry way and starts logging in the wireless... Since many of our customers are looking at the keys instead of the screen, they don't see what happens and are QUITE frustrated that they have to keep re - typing their username and password.

  Of course, the network connection fails because all users logging into our wireless network must have a domain account.

  This is how it is currently set up and works on MOST laptops.

  Wireless network using the JUMP to step 4 (safety type)

  TKIP encryption type is

  News of connection is configured to use the Windows logon user name and password<--- ac="" tries="" to="" log="" in="" before="" obtaining="">

  Tried with and without the inclusion of the domain name in the login name and refusing access until the user authenticates, but no go.

  I also tried with PEAP settings as well, but that he has not solved.

  Any ideas?  Y at - it a Windows update that causes maybe this?

  Salvation Fuzz!

  Try to change these keys in Regedit ens valeur0.

  HKLM\SOFTWARE\Lenovo\Access Connections\Roaming\EnableEthernetRoaming

  HKLM\SOFTWARE\Lenovo\Access Connections\Roaming\EnableRoaming

  Let me know if it solves the problem!

• Impossible to install Access Connections 5.00

  I have a T42 running Win2k, driver hotkey 2.08.2008, 4.1.2.156 wireless drivers and Access Connections 4.42. I downloaded Access Connections 5.00 and tried to install it but I got the following error after reboot:

  GetSystemWow64DirectoryW could not be located in the Kernel32.dll module

  My best estimate, this function exists only in XP or in the Windows 64-bit versions. I uninstalled AC 5.00 and cleaned up the directory and tried to reinstall, but still shows the same error. Does this mean 5.00 AC is incompatible with Win2k? Lenovo Web site claims that it supports Win2k...

  Note of the moderator; Please update your profile with your location country properly in accordance with the rules of the forum. Products, services and options vary from a market. Know your location helps us to help you

  
  

• After the remote access connection, network printers disconnected

  I hope someone can help me here.

  In Windows Vista, whenever I would give the remote access connection to my PC at home, my default printer (which was be a shared printer on the network out of my server) will prepare its default value.  It was boring but easily fixible.

  I've since upgraded to Windows 7 Ultimate and I'm having a related problem.  Now every time I connect remotely to my home PC, my default printer (same network shared printer - HP LJ 4000) disconnects, and it only comes back online after a reboot.

  It is a point of pain is huge for me because I usually 20 + / applications windows running at a given time and a restart takes 30 minutes out of my day to get back to where I was.

  Any help would be appreciated. Jeff Balcerzak

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/Windows-7-C7200-C7280-offline/m-p/167672

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/0cfa31d7-B44B-4241-aa31-d0ae9f0a2112

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00843712&tmp_track_link=ot_faqs/top_issues/en_US/c00843712/loc:8 & lc = en & dlc = en & cc = us & product = 1153481 & lang = en

• ThinkVantage Access Connections for Windows XP on G41

  I use a 2886-5TU G41 and I really screwed up.  I was cleaning my registry and it is a mess.  I lost all network connections, and they are not recoverable.  I reinstalled the software wireless and ethernet.  Device Manager reports the wireless card and Ethernet work.  But I can't connect what either as utilities connection - windows and IBM are corrupt.

  I d/l the 83cx71ww.exe and followed all the instructions.  I reinstalled sp3, hotkey upgrade, NET 4, upgrade of power management before you install the dial-up connection.  Now, when I boot the message I get is that ThinkVantage Access Connections will not work on this system.

  Y at - it somewhere that I can d/l the original supplied with this laptop for connections, files card WiFi and Ethernet card?  The latest just will not work.

  Thank you

  Carl

  Well, it's now a moot point.  Windows was all simply too altered by me and required a reinstall.  I just did.

  Thanks for watching all the.

  Carl

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• 6.23 access connections wrote dangerous registry key

  ThinkPad W520 4282-A23. Win7-64; 6.23 access connections

  Connections to access profile (slightly simplified) environment:

  1.) office LAN: Ethernet; DHCP environment full

  2.) home LAN: Ethernet; (192.168.2.8) fixed IP address; Router (192.168.2.1) DSL is the DNS server and default gateway and is also a DHCP server (mainly for WLAN clients, but will also answer on cable). All ethernet customers have a fixed IP address to allow independent operation of the DSL router.

  Note: Automatic localization is enabled IN the configuration of the CA.

  Scenario of the (repeatable) error:

  (a) of operating successfully the Office LAN profile: office's LAN disconnect AC

  (b) stopping of the system

  (c) starting system (disconnected ethernet cable at home;)

  (d) connect ethernet cable:

  Access creates the "Name Server" registry key with value 192.168.2.1 in the registry HKLM\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces\ key {...}, where {...} is the interface instance related to connections to profile 'Office LAN' (in this case: {9345B66E-EA2A-42AD-ACE5-03BE8E7FD63B}).

  (e) AC connect to profile 'Home LAN' (works ok)

  (f) AC disconnect 'Home LAN'

  (g) system shutdown

  (h) starting system (plugged ethernet cable at the office, in a docking station;)

  (i) AC connection to the profile 'office LAN:

  AC profile connection is successful, but the subsequent resolutions of name server fail. The system has received a full installation of DHCP, including name servers in the DhcpNameServer Key. However, the key 'NameServer' existing still in step d) above obviously outweighs the DhcpNameServers servers. As server names still points to 192.168.2.1, all name resolutions fail in the desktop environment.

  Temporary problem solution: use regedit to manually remove the server from the registry key names.

  I traced this down with ProcMon: Access Connections is the only process that never written in the key of the name server. More specifically (the call stack):

  ACon.dll AcRegistry 16: SetRegistryValue + 0 x 93 0x902f803 C:\Program Files (x 86) \Lenovo\Access Connections\ACon.dll
  17 ACon.dll AcSMBIOSHlpr::IsMasterSwitchExist + 0x21a5 0 x 9034895 C:\Program Files (x 86) \Lenovo\Access Connections\ACon.dll

  I can provide more data on request.

  I called Lenovo support. They said that ThinkVantage programs are not taken in charge.

  The assistants here who can cast a magical spell?

  After the latest Microsoft Windows updates, from January 15, the problem disappeared (with GIC760WW still installed).

• Access connections 5.02 disables Wifi

  I recently updated my T43 2686DFU with the latest updates of the system which included Access Connections 5.02 and the latest versions of Power Manager and Intel Wireless LAN drivers and now I can use is no longer my wifi - it is true that I have to carry a long LAN cable everywhere I'm lugging this laptop $ 1200.

  I googled and checked several forum posts, most of them returning negative with the only solution is to move to Windows Zero wireless Config to use my wireless radio, but that simply does not work for me (it is said that it is connected, but it is not really connected to that I can't do anything online).

  In fact, when I hit Fn + F5, a pop-up message tells me that there are no supported wireless adapters.

  I tried all reboot Power Manager, logins, keyboard shortcuts and drivers wireless, uninstall, reinstall new versions and even reinstall the old versions and nothing does.  I hope for an update to any software that has messed up my laptop and working soon as most of the things that I need this machine for online and if there is no LAN plugin, I'm pretty damn good everywhere where I bring this thing.

  Please do not make me buy a Mac!  I know one thing for sure - after I solve this problem, I uninstall the system update and NEVER update again (not the first time she missed for me).

  OK, I played with all the settings on my computer for 2 weeks now and I finally fixed it!  This means that I will NEVER put my computer using system update again.  If it ain't broke - don't fix.

  That's what I did (attention: cannot make no sense, but it in some way worked for me).

  1. go into network connections and highlight the LAN and Wifi.

  2. right click and "bridged connections."

  3. once filled, right-click on each LAN and wifi and remove the bridge.

  4 remove the bridge which looks like a 3rd card WLAN (which brings back you to what you had before: LAN and Wifi).

  After doing this, the dial-up connections started working again - IE. It's somehow figured out he could control my Wifi again!

  However, still unable to connect.  I did ipconfig and it says "media disconnected" for my Wifi.

  This is how I fixed it:

  5. upgrade to the Intel wifi adapter in the 9.0.4.39 2200 driver (last Intel site).

  It works!  I can go to sleep now.

• How to set up a local administrator account with elevated privileges, but without the rights of local access connection

  I want workstation installation a Windows 7 where regular users only have power user rights, because I do not want that they either accidentally change important settings or for malicious to be processes able to run Web sites. However that these will be remote users there maybe times when they need a local administrator account to allow them to perform installation, correction or updating. So, I created a local user account, added to the Administrators group and used the Panel of local security policy and the account added to the list "Deny log on locally '.

  It works by refusing the admin account to connect directly. However when I log in under the power user account and run something that requires elevated privileges the admin account is refused to carry out the process.

  What is the combination of security settings can I refuse a desktop session Admin account but allows it to be used for processes requiring elevated privileges?

  Thank you!

  Hello

  Thank you for contacting Microsoft Community.
  This is quite normal. When you refuse the privileges of local access connection, local users can not use the administrator account information because it is be the local login. So, it is better to create a domain and restrict the use of administrative operations to the administrator.