Access control server - CASE

Hi people,

I have my doubts on the access control server and NAC - clean access server.

The CASE of the NAC can do the job of the ACS?

In my scenario, it acts as VMPS server, AAA server, or RADIUS server.

Can someone help me?

Thank you!

Hi friend

ACS is entirely different than the clean access server. See the below url for more details.

http://www.Cisco.com/en/us/products/ps6128/products_qanda_item0900aecd803be813.shtml

If it helps, please note or answering another question.

Kind regards

Rafael Lanna

Tags: Cisco Security

Similar Questions

Evaluation version for the cisco secure access control server

Hello

I can get the trial version for the cisco secure access control server. IF SO pls send me the link.

Thank you

Hi Thomas,

You can download ACS for windows 4.1 or 4.2 from the link below:

http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-eval

For ACS 5.x, please visit cisco.com

Download software > Security > Cisco Secure Access Control System 5.x > Secure Access Control System Software

HTH

Kind regards

Jousset

Please evaluate the useful messages-

Directory MSDS access control error

I'm trying to grant access to a directory phone users Jabber video and I get the following error.
```
Unable to communicate with the  Provisioning Extension. See log (log-web.txt) for details. 
```
Journal - web.txt
```
23:15:29,641 [9] WARN  ASP.tandberg_tms_ui_phonebook_phonebooksetonuser_ascx - POST http://localhost:8788/pb/phonebooks/id/7a187c51-5da2-40a7-a214-27c4ae871ea1/acls failed: The remote server returned an error: (500) Internal Server Error.
```
I confirmed and even updated the user used in TMSPE settings, while the health check out all green.

Any ideas before I open a TAC case, thank you.

Hi Patrick.

It's a bug :) it happens when you change access control. For example, you grant access to a group, then clear, then re-enable a re.

The only solution is to recreate the phonebook. Delete it and recreate it. It will be fixed in the next version, I think.

/ Magnus

Sent by Cisco Support technique iPhone App

Black screen when you access the server console

We are currently experiencing the following intermittent problem...
When accessing a server through the console vcenter he'll suddenly lock (the console not the server).
At this stage the existing Remote Desktop connections continue to work, but no new connections can be established.
This leaves us in the position where the server is running, but we no longer have in any case of it management. In the past, the only way to retrieve the control was to restart the server that resolves the problem. However this is currently perform our mail server/domain controller so I hesitate to do a hard reset and will have to at least wait until that out of office hours to do. Which means I can't do the management and maintenance tasks I have to do today.
We currently have 2 x hosts running ESX 4.0.0 164009.
To manage using vSphere 4
The service that all servers seem to be Windows Server 2008 R2 or Windows Small Business Server 2008
is there one or more particular services can I restart to solve this problem?

The vSphere update, I suggest this as follows:
- first update the server vCenter Server (you need to download the new setup file, run the installation, say I have a database, use the existing ODBC name, and it will perform the update to U1)
- then install the new AUVS (there is the U1P1 version)
- then use AUVS to install ESX update (if you have a license of VMotion, it will work automatically, otherwise you will have to manually release each host to put in maintenance mode).
André

my taskbar disappears and I can't close properly. Cannot access control panel

Hi please can help you.

If I leave the computer for a while, the screen freezes.

I can't stop the computer correctly in the start menu, but have to do it from the Tower

by pressing the button until the orange indicator light appears. Instead of going to start, log off etc.

I can't access control panel either, but everything else seems to work very well.

Also, the taskbar disappears.

Help, please. best regards and thank you joan

Hi joanmorgan

Method 1:

You can check if you have found errors in the case where the Viewer, and if you find one, let us know the details. Check out the link for more details below:
http://support.Microsoft.com/kb/308427

Method 2:
You can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

http://support.Microsoft.com/kb/310353

If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

b. on the general tab, click the Normal startup option and then click OK.

c. When you are prompted to restart the computer, click on restart.

I hope this helps.

Access controls and IP addresses

Could someone clarify something for me, make access controls restrict access to a volume of only specified IP address or allow access to any IP address of a computer that includes the specified IP address...

An example of what I mean...

I have a volume 1, which has a record of access control of 192.168.1.10 and nobody else.

I have a server with two connections isci switching, 192.168.1.10 and 192.168.1.11

When I look at the current connections on the volume it shows both the addresses IP as having connections - but I would like to only one of the for connect.

Additional ACLs are hidden, being created on the fly. This prevents also maxing out limit ACL and speed up the login process.

Ideally iSCSI should be on its own subnet, with dedicated network cards. You can use the remote installation wizard to define subnets are available for iSCSI use.

It is a characteristic of the ACHIEVEMENT. Initiator iSCSI MS if SUCCESS did not you will need to define each path connection manually for each volume. Successfully, you need only one discovery entry, HIT does the rest.

Access control for iSCSI

Hi all

I have two EqualLogic PS6500E. On volumes of, created under the access control list , I applied and restriction of IP address to allow only the beach of 192.168.1. *.

Since a few days under connections , I noticed traffic/connections from other IP addresses (not high-end 192.168.1. *) actually configured on the servers of access to this volume.

Any ideas how is this possible?

Thanks in advance

Sébastien

Sorry, I wanted to add. Run the Remote Setup Wizard and select the option "Configure MPIO". That will list all subnets available on this server. Exclude everything except the iSCSI subnet.

Kind regards

message from Windows 7 system is unable to open the access control editor. invalid syntax

Hi, I recently bought this pc, asus n551jk, which came with windows 8.1, I switched to 10 windows because windows 8.1 give problems, so I had problems with windows 10 crashing on some games, so I decided to go back to windows 8.1 and all of a sudden I couldn't. don't know how windows.old has been deleted, but it wasn't the case to be found, and no, it wasn't a month yet since I went. After many crashes and intentions powerless to find a solution, I decided to go to windows 7. I installed windows 7 and had a multiboot windows option 10 and windows 7 successfully, but it was weird cos I just installed windows 7 on the c: drive, but now I had folders windows.old and windows.old000 on the c: drive and had also, folder windows on drives C and D, don't delete anything simply decided to restore my previous backup files, the files do not have restore to the usual places and it was all mess really, I had several repeated files, up to this point, everything worked perfect, so I decided to install updates and restart windows, after restarting, I realized I didn't have a multiboot option more, windows 10 had completely disappeared and had Windows 7 , and when I connected, I decided to get rid of some repeated files to free up space, and I noticed that I could not remove anything, when I clicked on delete, nothing happened, even no error message, nothing, nothing at all, I tried with several files and it remained the same. I looked for solutions on the net, tried to give me the privilege administrator cos it seemed to be the problem, then I noticed that I had 2 users, one of them which was 10 windows user and current user of windows 7, and the funny thing is that with the privilege of administrator is the user windows 10. but I can't access windows 10 more, then why? How is that possible? I have still two files windows.old, why have I lost access to the windows 10? It didn't remove boot options. then I went to windows.old000 and rendering account this is the folder that I had the privilege of administrator to the course, I could remove/change anything in this file outside of this folder, I couldn't do anything else, I could access the older records, but I could not change or do something with them and once again windows.old000 is on the c: drive, on which I have windows 7 installed. And why have I lost access to the windows 10 if I never deleted it, not even by mistake. and I've tried the command cmd / active: Yes NET LOG ADMIN and that I received was that USER cannot NOT BE FOUND. so I would be grateful if anyone can help cos im frustrated, I don't want to go back to windows 8.1, I have the drive, but its got a lot of questions. Thanks in advance-

Hello

Welcome to the Microsoft community.

Since the beginning of the question and not tried troubleshooting, there seems to be a lot of mixing upwards and there might be conflicts on Windows files for each installation. The best option recommended for everything what you back up data and start with the new facility.

However, you can refer to the suggestions posted by Shishira D and check if this may help.

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cant-open-access-control-editor-access-is-denied/0b938de0-620C-417f-a2b6-50a9c7f58766?DB=5

The steps include also the right command to activate by default. You can enable the default Administrator and check if you are able to access your data in the default administrator user account.

Hope this information helps.

access control exception

Hi guys,.

I read system/samples/photos pictures and show off in my application to the user. It works on the Simulator, but not on the device. When I try to open InputStream I get access controlled by exception. My application is signed. How to read? I saw that they are locked before with extension png.rem. Is it possible to read. Thank you

Best regards

yosoh.

Take a look at the details of the exception, especially the stack trace. I suspect that your claim is refused permission to read files on the local file system.

PS also, I remember that someone mentioned in this forum only images and built-in ringtones are not directly readable. Maybe it's the case...

Customer remote cannot access the server LAN via VPN

Hi friends,

I'm a new palyer in ASA.

My business is small. We need to the LAN via VPN remote client access server.

I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

Who can help me?

Thank you very much.

The following configuration:

ASA Version 7.0(7)
!
hostname VPNhost
names
dns-guard
!
interface Ethernet0/0
nameif outside
security-level 10
ip address 221.122.96.51 255.255.255.240
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.42.199 255.255.255.0
!
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
!
ftp mode passive
dns domain-lookup inside
access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
access-list allow_PING extended permit icmp any any inactive
access-list Internet extended permit ip host 221.122.96.51 any inactive
access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool testpool 192.168.43.10-192.168.43.20

arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list VPN
nat (inside) 1 access-list PAT_acl
route outside 0.0.0.0 0.0.0.0 221.122.96.49 10

username testuser password 123
aaa authentication ssh console LOCAL
aaa local authentication attempts max-fail 3

no sysopt connection permit-ipsec
crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto dynamic-map dyn1 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface outside
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp nat-traversal 3600
tunnel-group testgroup type ipsec-ra
tunnel-group testgroup general-attributes
address-pool testpool
tunnel-group testgroup ipsec-attributes
pre-shared-key *
telnet timeout 5

ssh timeout 10
console timeout 0

: end

Topology as follows:

Hello

Configure the split for the VPN tunneling.

Create the access list that defines the network behind the ASA.

ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0

Mode of configuration of group policy for the policy you want to change.

ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

Specify the policy to split tunnel. In this case, the policy is tunnelspecified.
```
ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 
```

Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List

Type this command:

ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes

Associate the group with the tunnel group policy

ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn

Leave the two configuration modes.

ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

Kind regards
Abhishek Purohit
CCIE-S-35269

KB3035583 failed - cannot access control panel or turn off PC

Because today, I'm not able to access control panel or turn off my PC Windows8.

I checked the software updates, and I see that the KB3035583 update failed last night. If windows 10 update I don't want installed nor am I eligible for it. However, this update failed meant now I can not access PC settings, control panel or turn off my PC. Also I am not able to run any command as an administrator because it tells me that I don't have that even if I am sure that this feature is enabled, and it's my PC denied access. I also tried restore but even that does not work.

Advice please?

Hello

See if this helps you:

"How Fix and PC Restore settings and"PC settings"in Windows 8.1"

http://www.eightforums.com/tutorials/42001-PC-settings-fix-restore-Windows-8-1-a.html

Information

This tutorial will show you how to restore the PC settings on applications screen and set the 'Change PC settings' link in the charm of settings (+ I) in Windows 8.1 and Windows RT 8.1.

You must be logged in as an administrator to be able to do the steps in this tutorial.

_____________________________________________

If this isn't the case, follow these steps.

«Use the System File Checker tool to repair missing or corrupted system files»

http://Support2.Microsoft.com/kb/929833?WA=wsignin1.0#manually repair

_________________________________________________

And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

"How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

Read it in conjunction with the rest of the information they give link above.

Note

If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

Repair-WindowsImage-online - CheckHealth

Repair-WindowsImage-online - ScanHealth

Repair-WindowsImage-online - RestoreHealth

Restart the PC afterwards, and then retry the command sfc/scannow .

If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

__________________________________________________

"How to update windows 8 and 8.1" . "

http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

Refresh your PC goes like this:
- The PC starts in Windows RE (Recovery Eenvironment).
- Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
- Windows RE installs a new copy of Windows.
- Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
- The PC reboots into the newly installed copy of Windows.
_________________________________________________

"How to reset Windows 8 and Windows 8.1" . "

http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

"When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

See you soon.

"Assign access control" on essbase applications through shared services

Hi Experts,
I just install an Essbase 11.1.2.4 environment, where I could see that the ability to assign filters to users in environmental assessments is disabled (I guess maybe it's that this version does not support the autonomous concept).
So I thought of attribution of the filters to users through shared services groups\Essbaseinstance1\sampleapp Application - access entitlement control, but when I click on "Assign access control", it says in the right pane that the page cannot be displayed.
Any tips? for your information, I use IE 11.
Thank you
Siva

I gather from your question that EAS runs like it enough to be upward, as you did that you have configured the web server again after that the configuration of the Regional service otherwise it will be a communication error.

See you soon

John

Cannot access ESXi server via network

Hello world!
We have a HP C7000 Encolosure with 4 BL460c Gen 8 blades in front size of it. Back size of the C7000, we have 2 SAN Switch, 2 switch HP BLc GbE2c layer 2/3 and 2 Onboard Administrator Module.
Everything is working fine with IP addresses like this:
OA active:
IP address: 172.16.0.253
STANBY OA:
IP address: 172.16.0.254
Server Blade BL460c Bay 1:
The IP address of the ILO: 172.16.0.10
Server Blade BL460c Bay 2:
The ILO IP address: 172.16.0.11
BL460c blade Bay 9:
The ILO IP address: 172.16.0.19
Server Blade BL460c Bay 10:
The ILO IP address: 172.16.0.20
We can ping pc that connected to the port of ILO on Onboard Administrator (OA) IP addresses above. (I can it call PC MANAGE?)
Continue, we access OA via Web https://172.16.0.253 use of , then Console integrated to control 4 Server blades. We have mounted image ESXi 5.1 U1 and successfully installed on 4 servers blade.
We manually config IP address on each ESXi Server (like this):
BL460c Server Blade on Bay 1 as server ESXi 1:
IP address: 10.0.0.11
BL460c Server Blade on Bay 2 as server ESXi 2:
IP address: 10.0.0.12
BL460c Server Blade on Bay 9 as a server ESXi 9:
IP address: 10.0.0.19
BL460c Server Blade on 10 Bay as a server ESXi 10:
IP address: 10.0.0.20
Now we can ping server to another server ESXi ESXi 1. I mean 4 Blade Server can ping together.
BUT:
-We can not ping servers to blade PC of manage (that PC connect to the port of ILO on OSTEOARTHRITIS. In this scene, MANAGE PCs has the IP 172.16.0.100/16)
-We unplug the network cable from the port of iLO, then connect it to the port number 24 on HP BLc GbE2c LY 2/3 switch, then address IP of the PC to MANAGE the 10.0.0.100/24 value. Always the same, can only access servers
Can someone explain to me how to access this server (ping, http, etc...). Do we have to config switch HP BLc GbE2c LY 2/3? We read many many guide on the HP website, but they have not mentioned about routing or switch to configure
Thanks in advance!

It's my mistake!

My servers have 2 connections FlexLOM. That a connection has been enabled for 'network management' in ESXi. I do not understand, then I activated 2 connections. That cause outside the network can not access them.

I just disabled a single connection and everything works perfectly.

I thank everyone!

Message access control in the OSB proxy service when the Service Type is the Any SOAP Service

Hello
We have a proxy OSB service where the Service Type is 'no matter what SOAP Service'. We use Auth.xml to authenticate messages to achieve this proxy service.
It is, ca we apply Message this proxy access control so that only user A is allowed to sent message has and only user B is allowed to message sent B?
Us know if the proxy OSB service is based on a wsdl, then we can apply access control message for each operation in the Security tab - and thus specify which user can access the operation. But unfortunately, we have not a wsdl, because this service proxy is a proxy gateway and must accept any SOAP message reaches.
For example, if the user name in the SOAP header is msgAUser, get is accepted.
"< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"
< soapenv:Header >
"< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."
< wsse: UsernameToken >
< wsse:Username >msgAUser< / wsse:Username >
< wsse:Password >msgApwd< / wsse:Password >
< / wsse: UsernameToken >
< / wsse: Security >
< / soapenv:Header >
< soapenv:Body >
<Get>
...
< /Get>
< / soapenv:Body >
< / soapenv:Envelope >
If the user name in the SOAP header is msgBUser, then MessageB is accepted.
"< soapenv:Envelope xmlns:soapenv ="http://schemas.xmlsoap.org/soap/envelope/">"
< soapenv:Header >
"< xmlns:wsse wsse: Security ="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">."
< wsse: UsernameToken >
< wsse:Username >msgBUser< / wsse:Username >
< wsse:Password >msgBpwd< / wsse:Password >
< / wsse: UsernameToken >
< / wsse: Security >
< / soapenv:Header >
< soapenv:Body >
<MessageB>
...
< /MessageB>
< / soapenv:Body >
< / soapenv:Envelope >
Any suggestions please?

Understood.

My current client, we have faced the same problem and implemented a similar design which nevertheless has important benefits.

The problem with proxy input all SOAP is not only in the complexities of authentication. Most important, resources fine grain (thread) management becomes impossible: proxy entry has a workmanager, one constraint of son max. If any single service behind entered proxy knows an influx of requests (because of a peak or a misconfigured customer), he eats the workmanager dry and the rest of the services become too inadmissible.

In this spirit, we have implemented the following diagram. It's a little more complicated, but it serves us well for a few years already:

EntryProxy 1-> Interceptor entering Proxy-> Proxy 1

EntryProxy 2-> Interceptor entering Proxy-> Proxy 2

...

Enter proxy doesn't do Nothing but shall forward the request for interception of incoming traffic. Power of Attorney of the entry, however, has its own WSDL, authentication and the workmanager which allows precise control.

Another important aspect of a proxy of the entry, it is that it passes a custom header containing the name of the destination of the interceptor, e.g. TargetURI = "ProxyService/Paypal/Paypal.

Incoming Interceptor Proxy performs all recording, the error handling and other common tasks.

Then, according to the last header, the proxy of the interceptor makes a dynamic call to route to the specified destination.

Yes, this design has an additional moving part - a proxy entry - but he a) works b) guard control all in our hands. The entry proxy is a very small point; When I need to make a new one, I just copy an existing one and replace the WSDL file and the value of the TargetURI - 30 seconds of work.

Hope that helps.

Vlad

http://vladimirdyuzhev.com

Fedora to access VMware server 2 web

Hello
I had problems with the interface web vmware server 2. When I first install vmware server 2 on a clean system, it works fine. However, after a reboot, the web interface is more accessible to the general public.
When I do
"netstat - anp |" grep vm ' I see port 902 listening however ports 8222 and 8333.
SELInux is disabled, I also turned to IPtables and ip6tables as well as fedora firewall.
I tried rerun vmware - config.pl, however this does not resolve the issue. I also tried to restart the management interface and that does not work either.
When I restart the vmware service, everything seems fine:
Stop the VMware autostart virtual machines:
Virtual machines [OK]
Stopping VMware management services:
VMware Virtual Infrastructure Web Access
VMware Server [OK] host agent
Stopping VMware services:
[OK] VMware authentication daemon
Virtual machine communication interface [OK]
Virtual machine monitor [OK]
Networking networking on/dev/vmnet0 [OK]
Detection of network host [OK]
DHCP server on/dev/vmnet1 [OK]
Host only networking on/dev/vmnet1 [OK]
Networking networking on/dev/vmnet2 [OK]
DHCP server on/dev/vmnet8 [OK]
NAT service on/dev/vmnet8 [OK]
Host only networking on/dev/vmnet8 [OK]
Virtual Ethernet [OK]
Starting VMware services:
Virtual machine monitor [OK]
Virtual machine communication interface [OK]
Virtual Ethernet [OK]
Networking networking on/dev/vmnet0 [OK]
Network invited only on/dev/vmnet1 (background) [OK]
DHCP server on/dev/vmnet1 [OK]
Networking networking on/dev/vmnet2 [OK]
Network invited only on/dev/vmnet8 (background) [OK]
DHCP server on/dev/vmnet8 [OK]
NAT service on/dev/vmnet8 [OK]
VMware Server Authentication Daemon (background) [OK]
Shared Memory available [OK]
Starting VMware management services:
VMware Server Host Agent (background) [OK]
VMware Virtual Infrastructure Web Access
From the VMware autostart virtual machines:
Virtual machines [OK]
I watched acroos the forums and tried quite a few options, but do seem to be getting anywhere, I was wondering if anyone has any other ideas.
I use a 64-bit version of vmware.
Thank you

Hello

I had same problem - Fedora 14 64 bit & vmware 2.0.2... and nothing on google :-/

Because I have not found a solution for this problem, so I wrote this post (my first btw :-))

After you install vmware (and patch before), everything works well before the first server to restart. After reboot - web access (port 8222 & 8333) has not worked.

For me, it has worked:

(1) check if vmware - spend is running (when vmware service is started):

# ps to the | grep vmware - pass

--------------------------

root of 1752 0.0 0.6 50760 225708? SSL 14:36 0:01 / usr/lib/vmware/bin/vmware-hostd - a d u - /etc/vmware/hostd/config.xml

(2) If vmware - spend does not, try to run vmware - pass manually (without the-d (demon) parameter):

# / usr/lib/vmware/bin/vmware-hostd - a u /etc/vmware/hostd/config.xml

--------------------------

(there was no mistake as.. libvmomi.so.1.0: no such file or directory)

(3) copy (or link) libraries starting from/usr/lib/vmware/vmacore/and/usr/lib/vmware/lib/to /lib64/

# cp /usr/lib/vmware/vmacore/libvmomi.so.1.0 /lib64/

# cp /usr/lib/vmware/vmacore/libvmacore.so.1.0 /lib64/

# cp /usr/lib/vmware/lib/libexpat.so.0/libexpat.so.0 /lib64/

(4) just try to restart the vmware service or server; I had to run vmware - config.pl new - vmware crashed.

If this isn't the case, vmware - always come running after you restart, try to rerun manually and wait minute (if it is started).

I already had virtual machine in vmware, so I got another problem...

VMware-get started, but just for a minute. After a minute, he wrote something as... out of memory. I tried to rename my vm and vmware has worked well (WebAccess Inc.) ...

So... Here is the solution to another problem...

5) simply to stop the vmware service

judgment of vmware for the service #.

6) Rename the library libxml2 vmware based

# mv /usr/lib/vmware/lib/libxml2.so.2 /usr/lib/vmware/lib/BAD-libxml2.so.2

VMware will skip this library and use a for/lib64 /...

(7) restart the server and try out it

Access control server - CASE

Similar Questions

Maybe you are looking for