Black screen when you access the server console

Similar Questions

• black screen, when you open the virtual machine console

  Hi guys need help in answering the following questions:
  When you open the console of the virtual machine, the connection process is fine, but it stops at a black screen

  

  That's what I use:
  (1) Windows 7 x 32
  VMRC 2) 5.1.0.20447
  (3) Mozilla Firefox 18.0.1
  (4) VMware vSphere Client 5.1
  (5) Vcloud 5.1.0.810718

  Here is my log:

  13/01/29 10:15:42.100 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:42.101 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, VMRC_EVENT_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:42.103 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:42.832 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C]}
  29-01-2013 10:15:42.833 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:42.845 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:379] 10:15:43.901: control of the VM has not been created
  29-01-2013 10:15:43.902 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:15:43.909 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.909: control of the VM has not been created
  29-01-2013 10:15:43.923 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.923: control of the VM has not been created
  29-01-2013 10:15:43.925 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.925: control of the VM has not been created
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:44.275 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, VMRC_EVENT_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:44.276 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:44.958 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD]}
  29-01-2013 10:15:44.959 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:44.970 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:15:46.770 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:46.770 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, VMRC_EVENT_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance ID 'vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}' - mode 4 - message mode has 2-3
  29-01-2013 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:46.772 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/ScriptableObject.cc:321]: ID of property not found: onMessage
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/VmrcPlugin.cc:2548]: onMessage Manager call failed
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:47.380 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996]}
  29-01-2013 10:15:47.381 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:47.388 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:17:20.197 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.788 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.792 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:15.303 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.308 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.324 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.324: control of the VM has not been created
  29-01-2013 10:59:15.326 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.326: control of the VM has not been created
  29-01-2013 10:59:33.283 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:33.284: control of the VM has not been created
  29-01-2013 10:59:33.540 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:59:33.540 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3

  Windows 7 x 32

  That's kinda our old friend is back.

  Two checklists

  1. check the version of the VM VGA driver, if that's the case, you must update the WDDM driver display driver.

  2. make sure that you use HW 7 and more.

  More info here

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Fonts Typekit works not when you access the site through go daddy domain forwarding.

  Let me start by saying that I am a complete nube. I have a limited knowledge of the terminology and the way that the web works but I'm learning. I have CC, has created a site for a friend and used a typekit fonts. I downloaded the site to my hosting account as a "subdomain" of my website to test and everything seemed to work very well. Once I felt that everything was ready to launch, I went to my account of go daddy friends and did his estate on the site. The site loads very well and all the fonts appear ok except one typekit fonts that I used. When you access the site directly (as a subdomain on my site, example: www.mypersonalsite.com/myfriendssite) I see typekit fonts in all its glory, however when accessing the site of the field pointed no name, no typekit fonts. Very confused. I was under the impression that the two methods to access the site will take you to the same place and yet they net of different results. Any help would be appreciated.

  Hey Danny,

  Web of Typekit fonts are served only for the specified domains to publish on time. You need to specify explicitly field of your friend when the site is published.

  The website URL (s) on the ground in the Upload FTP host and export as HTML dialog boxes take in charge several entries separated by commas as in www.mypersonalsite.com, www,myfriendssite.com

  I hope this helps.

  Abhishek

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• How to cancel name for username/password when you access the WIn7 computer to stream?

  Hello

  I have a win7 computer and I would like to access it from a stream. I see the computer win 7 banners, but when I try to connect to access shared folders, it requires username & password. I don't know what they are. I have another computer with Vista from where I can access the computer of win 7. I can also access files on the computer of vista of banners.
  I turned on the discovery network, printer and file sharing, turn on sharing so anyone can read & write files in the public folder. Disabled password protection sharing and allowed Windows to manage the homegroup connections (recommended).
  Can any suggestions on how I disable the name of user and password? or at least what is it?
  Thank you
  Leon.
  PS: He used to work properly without a username, but suddenly he began to pose for her (probably after that I restarted the computer or the streamed)

  Hello

  I understand that you want to cancel the name for username/password when you access the WIn7 computer to stream.

  I suggest you to send your query on the forum of streamer and I hope that they will be able to guide you in the right direction.

  Here is the link:

  http://support-splashtop2.Splashtop.com/forums

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Make a custom page when you access the URL of the root of a Web application

  A BC blog post says it's now possible to "make a custom page when you access the URL of the root of a Web App site. For example, if you have a "blog" Web App, items can be made available to/blog/my-blog-post, and you will be able to customize the page/blog"

  Is this possible? It doesn't for me due to unique URL problem yet.

  For example the web page is / banksy - Guide of Banksy

  But web app components must be on/banksy/web-app-item but need to change to/banksy-editions / Banksy choose your weapon (green) | Gallery hang up Banksy Guide

  I don't see any documentation, support BC do not know and ask me the Forum to discuss. Someone at - he found a workaround?

  Thank you

  Paul

  You have a page with the same name as you want for the web application folder.

  1 remove this page from banksy (Dungeon of backup of your content)

  2. change your url web app for /banksy you need

  3. create a folder called /banksy (it will allow you to make a folder)

  4. create an index.html in the folder of Banksy page - put your content to the page that you deleted here

  You will then have an index for the file page and the web application will work...

  /Banksy - index page

  /Bansky/ - index page

  /Banksy/index.html - index page

  / web banksy/something - point app

• Black screen when you try to start PowerPC G3 beige

  I have a vintage tour 1997 beige PowerPC with OS 9 (don't know which version, I think that the last of them he would go - 9.2.2?).  It has been sitting in the corner, turned off but plugged in for years (on a UPS protected against overvoltages with newer computer).  It was probably 2-3 years since the last power successful upward to retrieve something from him.  I am wanting to get data out of an old program on it, but can't get any view of it, just a black screen.

  Here's what I know about the material:

  Label says PowerPC G3 233 MHz, 512 K Cache, 32 MB / 4 G HD/24 x CD / 56K Modem, 17/02/98

  The memory may have been renovated years ago, there are 3 SIMMS inside.

  I use the video port built, with an adapter for the Apple Display Connector to VGA adapter which worked very well all the years I've used the computer.

  When I turn on, it is what is happening:

  I get the normal "chime".

  The monitor it is connected to the wake mode 'sleep'

  The display goes completely black - (no happy Mac, sad Mac or any Mac or gray screen)

  The monitor will never return "standby mode" until I have shut down the Mac (at least for 10-15 minutes I leave at the same time).  This makes me think that the port video is send something to the screen.

  • Here's what I've tried so far:
  • Tried 2 different monitors and cables, which has occurred on other computers (relatively modern flat screen LCD)
  • Replace the onboard battery
  • Zap the P - RAM
  • Reset the NVRAM by starting command-option-O-f and strike blindly
    • Reset-nvram (press enter/return)
    • Reset-all (News-enter/return) - at what point he restarted then assume that it took orders
  • Started with the space bar to see if the extensions manager would come to the top
  • Sitting SIMM memory (I remember when a memory SIMM went wrong after years, I'm a his 'breaking glass' at the start so I think the memory is OK?)

  The only things I can think to try are changing the ADC to VGA and put in a PCI video card.  Wikipedia lists a couple that were popular with this vintage Mac: ATI Radeon 7000 and 9200.  These will work without having to install drivers? It seems that http://www.amazon.com/ATI-Technologies-Radeon-7000-Graphics/dp/B0000630TB can be had pretty cheap, I don't know about the drivers.

  I have not tried booting from a cΘdΘrom, especially because I was not able to locate them.  I could watch more difficult if it is reasonable to expect a different result, but that seems to be a more fundamental question.  If there are any people with ideas vintage Mac, it would be greatly appreciated!

  The Amazon link you posted is for the PC of ATI Radeon 7000 version.  You need the Mac or PC version which took his chip EEPROM reprogramming with the Mac code.  Fifteen years ago, I bought eight of the sale to the retail-boxing, PC version Radeon 7000 s and flashed the ROM, for use in my beige G3s.  It took OS 9.2.2 support the latest drivers that allowed a 2D acceleration.  The Radeon 9200 Mac Edition is the final PCI graphics card that they marketed for Macs and would cost more and be more graphics card that you need, just to retrieve files from the G3.  You may be able to find a cheap, compatible Mac Radeon 7000 on ebay.  In fact, the older (Mac compatible) ATI Rage 128 PCI graphics of a B & W G3 (shown here) would be well suited to your needs.  When you zapped the PRAM, how many times have you let it go through the reboot cycle, while now pressed the keys "command + Option + P + R?  I usually gave it three.  You could try to remove the sound card 'personality' clean oxidation on the pins plated gold with a soft, white gum and reinstall.  This would be the case for modules of memory DIMMS and ROM card, which can also become oxidized over time.  If the Mac to VGA DB-15 you have a set of microswitches adjustable, the parameters of the (resolution) may be different for newer LCDs you've tried, especially if they have an image format widescreen.  "You can also consult the"failures of start-up list' on this page speed up your Mac G3 box. " "There was a problem with the first batch of voltage regulators used in the beige G3s, but I think they were passed to the VRM Raytheon in February 1998.  If "Raytheon" is printed on your VRM, you can probably exclude the problem.

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• Can I turn off the setting that displays the height and width in a small black box when you use the marquee selection tool?

  In Photoshop CC on a mac...

  When you use the marquee selection tool, a little black box appears next to the cursor and displays in real time, the height and the width of the selection.  The same annoying box also appears when you drag an item with the tool move, displaying the numeric position of the cursor.  Is there anyway to disable the display of this little black box?  It makes me crazy.

  In cmd/ctrl-k preferences click "Interface". At the bottom of the interface user is a drop down menu to see the transformation. The value as 'never '.

  

• 503 error when you access the console of the APEX for the CDB

  I can access the console of the Apex for the preliminary draft BUDGET, as per the documentation. But not the CBD.

  • For the CBD in a database of the 12 Release 1 database Oracle:https://node-ip-address/apex/
  • For a file in a PDB database of the 12 Release 1 Oracle database:https://node-ip-address/apex/lowercase-pdb-name/

  I get a 503 error.

  I tried with and without SSH tunnel. Neither work. Any advise?

  You can create a PDB files using the PDB self-service app, EM Express, SQL or SQL Developer directly. No net APEX strictly for that.

• Black screen when I turn the Satellite M

  When I turn on the laptop, I can not in the system screen, in black only, after that I tried several times, so I can't get into the windows system.

  What is the problem?
  Tanks, boyfriend

  Hello

  You are able to access the BIOS?
  If this is while there could be a motherboard problem

  Have you tried to connect the Satellite laptop for external monitor to check if something is not visible on the second screen?
  I think it would be useful to get more information about the possible hardware problem
  If a second screen would be too dark, then a problem of graphics card would be possible

  However, I doubt that you could fix yourself. Most of the time it s a job for a technician

• Forbidden/403 error when you access the OIF after installation

  Hello
  
  I just installed OID + OVD + OIF on a Windows 2003 server. The Oracle database is on a separate machine.
  
  For the installation of the OID + OVD + OIF, I installed WebLogic 10.3.3, then ran the installer OID + OVD + OIF and was able to do successfully.
  
  I then rebooted (seems to be necessary), then ran startNodemanager.cmd and can access the Console of WL and seen the servers 'wls_ods1' and 'wls_oif1 '.
  
  I have two of these servers has started successfully.
  
  When I go to http:// < host >: 7005/dohad, I have the console of the ODS.
  
  But, when I go to http:// < host >: 7499/fed, I get an error 403/forbidden.
  
  I checked the Adminserver log file and the wls_oif1 log file, and there are no errors. In addition, the log file of access for the wls_oif1 server shows no access.
  
  Is there an extra step that I have to do to enable the server of the OIF?
  
  Thank you
  Jim

  You are using an incorrect URL. Please use this:

  http://: 7499/fed/PDI/initiatesso

  and / or

  http://: 7499/fed/sp/initiatesso

  If you want to administer the OIF, you can use the MS enterprise manager. Using the em, you can start the OIF and use the url above.

  http://: 7001/em
  http://: 7001/em

  Port 7001 is the default value; If you thing hv selected during installation, then use this port. The login is (by default) weblogic and password, this is what you gave when installing.

  I hope this helps. Let us know.

  Published by: AmbarishMitra on April 11, 2011 10:33