access denied file

Similar Questions

• Owner of the 'ACCESS DENIED' file to the owner

  I'm on Windows XP Home edition 2002, Version 5.1, 32-bit (Service Pack 3)

  I can't access my account "Owner" no matter how I approach him--even from the command prompt.  I keep getting messages like "the owner is not Accessible.  "Access denied", I lost it and thousands of irreplaceable files after screwing up an attempt to "system restore."  (I have not now viable 'system restore' point.)  What I have is a second file "Owner", namely: "Owner.YOUR - W92P4BHLZG".  Apparently there are still files residing on the 'Owner' orginal account, but I can't.

  Here's the kicker: I found the instructions on how to get access to the files ' owner', but I must have a Windows odball version because there is no "Use Simple File Sharing" option in my options 'Advanced Settings' under "Folder Options."  Any help would be appreciated.

  Hi Kilpeder,

  Since you have Windows XP Home Edition, you must start the computer in safe mode and try to take ownership of the file in safe mode. The option disable file sharing Simple is available in Windows XP Professional. To start the computer in safe mode, restart both computers and keep tapping the F8 key. Once you see the option to select Safe mode, select it and press ENTER.

  You can access the link below and follow the steps in the article to take possession of the file or the folder on the computer.

  http://support.Microsoft.com/kb/308421

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows WPD - access denied file system Volume driver

  original title: Driver Windows WPD files Volume

  I just installed the Service Pack 2 of Vista for 64-bit system.  Now, I have a message looking for driver for my printer.  When I search for it, I get the message

  Refusal of access Windos WPD files Volume driver

  I just installed the Service Pack 2 of Vista for 64-bit system.  Now, I have a message looking for driver for my printer.  When I search for it, I get the message

  Refusal of access Windos WPD files Volume driver

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• program access denied files...

  whenever I have use a microsoft office a message appears saying that this program is not installed for this user, and I have to re-run the installation program.

  Today I faced same probelem. I did everything possible, but nothing happened.

  Finally, I created the NEW USER account and set the NEW USER account. I was working very well...

  Also, you can try...

  All the best...

  MOEEN AJAZ KHAN MD - MCP/N + / A +.

• Still ~ building system (tri) access denied file

  I work with a Windows 7 PC.   I'm trying to archive the old video footage of 1982. I'm used to first but new in yet.  I tried to burn this game to the school on standard DVD disc and it worked.  Then I tried double layer and my problems began.  Tried to burn to DVD folder to simplify and am almost there.

  I suspect that part of the problem may be that I export in yet.  Put film on timeline and I'm left with a chronology of orphans.   I've solved this by removing the orphan of the first.    I noticed that on my last attempt 'Menu Item I' added white to the main menu.

  Antoin151

  Don't know if this should be the problem but Windows 7 as its syster windows Vista introduces security (bug) I call cause I don't think that it is no reason for this type of interactions.

  Well instead of lunch still left by clicking on its icon, just right click and select run as an administrator, a security warning is displayed, in which you can also click on "select" when this warning appears the option and set it to never. then click OK and OK. Still can not lunch at this stage but repeat the process by right clicking and select Administrator, now try burning your disc or image.

  Hope that helps.

• Cannot conect - access denied

  I recently changed provider hosting and simply all the files in my past to my new public directory public_html folder. However, when I open contribute and the attempt to connect to my site, I get a message "access denied - file does not exist or might be a permissions problem. I see that Contribute is to start to download a file of test called "cthub337f0ela5ba0875f.csi". I have no idea what it means. I've updated name/password FTP IP information and the user for the new host. Why this is happening and what I can do about it?

  Just a suggestion here, based on our experience of the CPS in movement to a new server. ATTENTION: I would make this knowledge move everything you need to know about your new connection: the URL, the default home page is (index.htm or index.html, the FTP connection settings, etc.). Also be sure to save your xml with the user files and other mission critical files so you don't lose them. You should be ok because you're not re-setup of CPS, but it is always good to be safe.

  You can restore your connection to remove the old and creating a new. First open Contribute and even if she isn't the connection, just to get the homepage. Then click on change--> my connections to open the dialog box that shows your connection "old." You can choose and click on the button Delete. Then, you can click on the button create to walk through the process of creating a connection to the new server.

  Again, BE sure THAT you know what is on your new connection before attempting this, so that you know how to create. Passage of the files is not likely to help your login process is filled with several writings and readings on the server via FTP and the best thing to do is to create a new connection (and a new key encrypted accordingly connection) that this sets up completely. Once you are re-connected, you enter in the Admin section and access the list of possible files by default the server may use (e.g., default.htm, index.html, index.htm, default.html, etc.) so that your home page can be recognized.

  I hope this helps.

• Delete the file - access denied

  I downloaded a bios update file and saved to a folder on my desktop.  It's for another computer.  When I try to delete it now, it says "access denied."  The name of the file is sp24786.exe.  This is a utility to create a disk to update the bios for an Armada 1750.  My laptop is a DV5140US.  Can someone help me?

  Thank you

  Ron2

  You probably accidentally "run" the file, and there is a window somewhere waiting for you to click 'OK' or something, when an exe is runing, windows do not allow you to delete it. But it should allow you to remove it if it is not not runing.

• Executing an .exe file indicating "Access denied in command prompt" and a pop up with message error "this application can run on your pc.

  Hello team,

  I have a c# console application (EX: Utility.exe) who was once fully functional in windows server 2012 since last year 1. but for a few days while running display of the 'access denied' prompt in the command prompt and a pop up with message

  "This application can run on your pc to find a version for the control of your pc with the software publisher. I am not able to understand why I get this weird error. Other exe files works quite well in the command prompt. below is the screenshot for reference. If everyone is facing the same kind of issues before please answer quickly. are

  Hello

  You may need to ask the question on the TechNet forums:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Concerning

• Could not open my file microsoft when it says in my owner proected Compote: q: access denied, but I am the administrator how can I open it

  I can't open my file inder microsoft my computer it says access denied protected owner Q; but I am the administrator how to open this file

  I suspect that you have Microsoft Office 2010 is installed.

  See: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/local-disk-q-access-denied-0-bytes-file-system/f4426199-5077-4bbc-99f5-49036b73478d

  -steve

• Access denied when you delete a file from a batch file

  I run a batch file to compress and then delete the original file.
  The file is with everyone full access, and therefore the file.
  I run the batch Administrator file (literally, right click and choose Run as administrator).
  The delete operation has always failed with the error: access denied.

  What Miss me?

  I use Windows 2008 Server R2 Standard Edition SP1.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Cannot back up files:, error: access denied code # 0 x 80070005

  When I tried to back up files through Windows, a mess of error. said: ' access denied, error 0x80070005 # I always attack I am able to back up files to an external hard drive

  Hello

  1 do you have full permissions to the files that you are backing up?

  Looks like a problem with permissions for me. But first let's try the following steps.

  Step 1: If you receive the message that your copy of Windows is not genuine, then try to validate the OS by visiting the following Web site.

  Genuine Microsoft software

   

  Step 2: Try checking the (backup) behavior by following these steps:

  (a) you might try to temporarily disable your anti-virus and malware during execution of the backup. If the backup works fine, then you have to search for updates and firewall settings in the security software.

  (b) you can also try to disable user account control, while safeguarding.

   

  Reference: http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  Note: Make sure that you enable user account control and the back of the antivirus on the computer after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.

   

  Step 3: Check to see if there are drive errors that can cause this problem.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Step 4: Put the computer in a clean boot and see if it helps. Follow the instructions in step 1 in the following article. Run the backup and check if that helps.

  http://support.Microsoft.com/kb/929135

  Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.

   

  Hope this information is useful.

• How to delete temporary internet files which are described as "access denied."

  I tried to erase internet files temporary 'temp' and '%Temp%' records "prefetch". Some I can't delete and I get a message that says "access denied" or "this file is used by someone else. I think I have been subjected to some Martin

  Hello

  1. what operating system is installed on your system?

  2 are connected to the system as an administrator?

  Appropriate files and see if you can remove the files.

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Method 1: Remove temporary files in safe mode networking.

  Follow the link below and start in safe mode with network and check if you are able to delete temporary files.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode  (For Windows Vista)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode  (For Windows 7)

  Also, follow the link below and run the fix - it and check if the problem persists.

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  It will be useful.

• access denied with Outlook file.

  We installed the file server and domain on windows 2003 R2 SP2. Adhered to all users and all cards ready to store data and Messaging.
  May 1 month a go we know not why. Customers sometimes there when they start outlook (2003,2007) open, Outlook cannot fine or access denied on the file stored in the disk of the card. but card reader folder can be accessed to drop normal when exploring on it. But when we try using remote desktop remotely to the file server or DC until it was connected and then Outlook and can access normal.
  I really know that something happen with my server and remote with the email client desktop this file access on the file server.

  For safety use Bit defender network license
  Windows 2003 Standard Edition license

  Thank you for your interest and help.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Open the data file Outlook - access denied

  I have an Outlook data file created and used when I was running Outlook 2003 on Windows XP - Pro. I have a new computer with Windows 7 Home Premium. I'm still on Outlook 2003. When I try to open the data file, I get - file access is denied. You don't have permission to access the file C:\Users\Valued Customer\Outlook_xxx.pstr

  I am logged in as administrator.
  The permissions for all folders in the path and the file itself grant full control.

  I changed the owner to my new login name.

  NG wrong - try: http://social.answers.microsoft.com/Forums/en-US/category/officeoutlook TaurArian [MVP] 2005-2010-implementation to date of Services

• XP Pro SP3 - C:\FOUND.001 file-"Access denied" trying to open the file

  XP Pro SP3 instance reported corruption in the settings & Doc. Ran CHDKSK/f, then logon has not read the profile & given by default.  C:\found.001 was visible during logging ADMIN & No.  Removed the HD and mounted as external USB media to another PC with kit I use & even after "property", not "Access denied" trying to open the file.  ATTRIB = SH & can not change (access denied).  You will need to recover Outlook.pst & other files.  Ideas?

  Thank you

  Michael

  Try to start your system from a "Live Linux" CD free.  This CD runs a version of Linux without installing anything on your hard drive.  To create the CD, you download a file ".iso" and feature "Burn Image" of your CD burner to create a bootable CD.  The advantage, that you win, is that Linux is a lot less strict with permissions, so you should be able to access your files and copy them to a USB device.  Some Linux Live CD are:
  Knoppix: <> http://www.knopper.net/knoppix/index-en.html >
  Ubuntu: <> http://www.ubuntu.com/download/help/try-ubuntu-before-you-install >
  Ubuntu is actually an installation disc, so be very careful to follow the 'Try Me' instructions so that don't accidentally install you it on your hard drive.

  An another boot CD, you might try is "Hiren".  It is in fact a version of "First environment" of Windows XP, so you could get access to some files that you would otherwise not not when starting on this disc.
  Hirens: <> http://www.hirensbootcd.org/download/ >

  HTH,
  JW