Access management service

Similar Questions

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• Access to the data after the managed service VOImpl in bean method call

  I use JDeveloper 11.1.2.4.

  I created a method to Interface customer and he calls you a managed bean.

  The method is exposed in the control of data and I have a links to it through links on the page.

  The method runs just a view of criteria for a row of data in the database.

  But, because the method does not have a return value, how could access the View object data.

  Here's the Service method and the method of the bean management;

  The service method: in PersonVOImpl.java - should result in 1 row:

  public void getPersonByCnViewCriteria (String cn)

  {

  ViewCriteria viewCriteria = this.getViewCriteria ("PersonVOCriteriaByCn");

  Reset a display criteria of values that may was resolved at design time

  viewCriteria.resetCriteria ();

  this.setCnBind (cn);

  this.applyViewCriteria (viewCriteria);

  this.executeQuery ();

  }

  Method in managed Bean: I have a linking operation method to access the Service method.

  
  

  It seems that the Service method is executed successfully.  But, how to access the data after the call?
  

  
  

  protected void getPersonByCn (String cn)

  {

  BindingContainer bindingContainer = this.getBindings ();

  OperationBinding operationBinding = bindingContainer.getOperationBinding("getPersonByCn");

  Map operationsParamsMap = operationBinding.getParamsMap ();

  operationsParamsMap.put (WorkFlowBean.PROPERTY_CN, NC);

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ())

  {

  }

  
  

      // How to access data after the call?
  

  }

  You should never use a class VOImpl or VORowImpl in a managed bean. If you have to use them, create Interfaces and use.

  I'm not too sure if it's good to return a view in a method object.

• Flash Access Manager: create the update list policy generates SERIOUS: Servlet.service () Exception

  I have created a new policy and want to broadcast its existence to our server to access the Flash, but using the list of update of political strategy-> add-> create a list updated policy, I have an error message (Note: the only parameters different when comparing the new policy to the RFA - policy.pol is the addition of the HDCP Encryption tab right to play) :

  The server encountered an internal error () that prevents to satisfy this demand. java.lang.ArrayIndexOutOfBoundsException exceptions : 2

  com.adobe.flashaccess.refimpl.userinterface.UICommunicator.createPolicyUpdateList (UICommu nicator.java:817)

  com.adobe.flashaccess.refimpl.userinterface.UICommunicator.doPost (UICommunicator.java:145)

  javax.servlet.http.HttpServlet.service(HttpServlet.java:637)

  javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  It is also registered by Tomcat:

  February 1, 2012 12:57:57 org.apache.catalina.core.StandardWrapperValve invoke

  SERIOUS: Servlet.service () for servlet UICommunicator threw the exception

  java.lang.ArrayIndexOutOfBoundsException: 2

  at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.createPolicyUpdateList (UICommu nicator.java:817)

  at com.adobe.flashaccess.refimpl.userinterface.UICommunicator.doPost (UICommunicator.java:145)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)

  at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)

  at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 583)

  to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)

  at java.lang.Thread.run (unknown Source)

  Here are a few screenshots with all my settings Flash of Access Manager:

  

  

  

  

  -EDIT: MORE INFO.

  I also tried to creating policy using command line tools, specifically the AdobePolicyManager.jar by using the following:

  java-jar AdobePolicyManager.jar new poltest.pol o - x w 210240 - opAnalog NO_PLAYBACK - opDigital NO_PLAYBACK

  with my flashaccesstools.properties configured. (I can reach so useful)

  The policy is created, but the errors of content about authentication during playback.

  Content plays successfully when encrypting using the default ad - policy.pol, but new policies do not seem to be recognized by FAX3, and I can't get them to be recognized correctly.

  Post edited by: Derek J Entringer

  This is now solved. Policies were properly created, and the content was being encryption properly.

  The problem occurred because the Protection of output type was not matching what has been implemented within our Treaty custom authentication backend.

• TrueSuite Access Manager unlocked when coming out of standby

  Hello

  I have a Toshiba laptop with Windows XP Service Pack 3. There is a program called TrueSuite Access Manager responsible in this regard.

  When I leave my computer unattended for a short period of time, I lock by Ctrl + Alt + Delete and unlock everything just when I get back to him.

  Sometimes I put my computer in stand by mode. When I bring it online, it will automatically unlock and you can access everything on it. How do I set up my computer as it will be locked and requires a password when coming out of standby.

  Thanks in advance a lot.

  Hello

  If you are using Win XP Toshiba Power Saver must be preinstalled on the laptop.

  TOSHIBA Power Saver contains a very useful option that you're looking for.
  Go to Toshiba Power Saver and check the tab called configuration Action.

  You will find the option called password prompt during the recovery of the standby or hibernation mode.
  This option must be enabled!

  I hope this helps!

  See you soon

• Error Code 1720 when you try to install Verizon VZ Access Manager

  I try to install Verizon VZ Access Manager on a 64-bit Vista Service Pack 1 computer, but every time I get this message:

  "Error 1720.  There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your provider to support personal or package.  "Script UnInstallDrivers64.5F1DC02E_0598_4666_8B42_4C5AA41526BB error - 2147024894, a custom action: line 3, column 1,

  I tried the following:

  • Delete the exe file and re-upload
  • Install the latest version of Windows Installer (file. Windows6 0-KB942288-v2-x 64.msu)
    )
  • Performed all the automatic Windows updates
  • I copied the exe on another computer and then installed with no problems

  Any help would be appreciated.

  "Contact your staff support or package.

  http://www.vzam.NET/

  Link above has their Support tab at the top for them to help you with your problems regarding the installation of their products.

  See you soon.

  Mick Murphy - Microsoft partner

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.

• Deactivate the filter driver Cisco AnyConnect Network Access Manager

  I hope that it is the community just to post this in.

  I was wondering if it is possible to script disable the "Cisco AnyConnect Network Access Manager filter driver" for a LAN connection?

  By comparison to the registry before and after it is manually turned off via Control Panel control-> network and Internet-> network-> connection to the Local network connections, I came with:

  : remove the filter Cisco AnyConnect Network Access Manager driver
  : the list of filters for the LAN adapter
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0007\Linkage /v FilterList/f

  : import the Cisco AnyConnect Network Access Manager filter driver
  : to the list of filters, excluding the LAN adapter
  Reg import linkage - no - lan.reg

  : remove the filter Cisco AnyConnect Network Access Manager driver
  : the network of the LAN adapter config
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Network /v /f Config

  : import the Cisco AnyConnect Network Access Manager filter driver
  : to the network with the exception of the LAN adapter config
  Reg import network - no - lan.reg

  : Remove the adapter LAN of the list of maps where the
  : Cisco AnyConnect Network Access Manager filter driver is used
  reg delete HKLM\SYSTEM\CurrentControlSet\services\acnamfd\Parameters\Adapters\ {77197E43-5875-469F-A3A5-A97F63A32E0A} /f

  This disables 'Cisco AnyConnect Network Access Manager filter driver' to connect to the local network, but it is not automatically to my wireless connection.  However, if I manually in a not checked the "Cisco AnyConnect Network Access Manager Filter Driver', the connection automatically changes my wireless.

  The end result, I'm looking for must be able to use a wireless connection and at the same time be able to use the connection to the local network, when I connect directly to some work equipment to download the firmware files.

  Any thoughts would be greatly appreciated.

  Thank you.

  Hi Paul,.

  Instead of hacking the registry, you can use nvspbind.exe for this task.  You can download the tool here.  It will be also NAM automatically mode interfaces.

  https://Gallery.technet.Microsoft.com/Hyper-V-network-VSP-bind-cf937850

  Disable: nvspbind.exe /d "Wireless network connection" csco_acnamfd

  activate: nvspbind.exe/e 'Wireless network connection' csco_acnamfd

  Thank you.

• TrueSuite Access manager needs fingerprints - Satellite U400 driver

  Hello

  Whenever I start my new Satellite U400, TrueSuite Access manager says that the drivers are not installed for the fingerprint reader and try to install them again. Even after I install TrueSuite Access Manager, he asks me to reinstall the driver. I'm currently ignoring this but it bothers me.

  "TrueSuite Access Manager on Portege M700 - 13P"asked the same question and answer. But I did not understand what means TPM.
  > Okay - it just stopped.
  > I installed the TPM secure and the problem disappeared...

  Can someone help me?
  Shinya

  Hello

  On the European driver Toshiba page, you will find a new v-Fingerprint Software 7.10.1.2
  Remove your old software from the system. Then clean the operating system using the CCleaner (it of free). Reboot several times, and then install the new fingerprint software downloaded.

  Work

• Tecra R10 - TrueSuite Access Manager doesn't work with IE8

  Fingerprint software does not start after you install Internet Explorer 8 in my Tecra R10 TrueSuite Access Manager stops working that is when I open a site that requires the login/password.

  I've updated the TrueSuite Access Manager to the latest version 2.5.28.0 but the problem remains. From the console to access the password Bank Manager the program stops responding.

  Operating system: Vista Bussiness 32 bit
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager: 2.5.28.0

  Does anyone have an idea of the problem?

  Thank you.

  Hello

  Have you tested with IE7?
  Did this happen using the preinstalled Toshiba OS and Windows with IE7?

  If this n t happens using the IE7 while there may be a compatibility issue between the two parties; IE8 and TrueSuite Access Manager.

• TrueSuite Access Manager on Portege M700 - 13p

  Whenever I start my new Portege M700 this program says that the drivers are not installed for the fingerprint reader and t testing install again. Install TrueSuite Access Manager starts and then it asks me to restart my PC. Every time. I'm currently ignoring this but it bothers me.

  I can connect with the fingerprint reader, which suggests that the message is bogus.

  Recommend a way to solve this problem?

  I'm tempted to remove the device from the hardware Manager and uninstall the software, then restart, reinstall the software and then redetect the hardware...

  Anyone got a better idea before that I'm wasting my time?

  See you soon,.

  Rob.

  I agree with you and I think that the first step, you can try to remove preinstalled software and install the latest version of the Toshiba support page.

• Portege R500 - TrueSuite Access manager does not work with IE 8

  TrueSuite Access Manager does not work with Internet Explorer 8

  Version:
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager 2.1.23.0

  Any idea?

  Thankx
  Robert

  Hello!

  Which laptop computer and operating system you have?
  And what do you mean with it doesn t work? You get an error message or something else?

  You must give us a little more information. Otherwise, we can t help you my friend.

  Good bye

• Satellite A300-1IH: TrueSuite Access Manager not preinstalled

  Hello

  I bought a Toshiba Satellite A300 1IH and in the user manual, I read about TrueSuite Access Manager but I have not found installed on the pc.

  Why?

  You have a fingerprint on your laptop?
  I doubt that this and that is why the TrueSuite Access Manager is not installed on the A300-1IH.

  Only portable computers with fingerprint function (there are various notebook series) are pre-installed TrueSuite Access Manager.

  I think I could bring a precision ;)