Access point: access to personal data?

Hello everyone. I have a question: if I share my hotspot iphone with someone, that person has access to my data?

They should not. They are simply connected to your phone as a wifi "router/modem", that is unless they share your Apple (a bad idea) ID or have access to your account.

Tags: iPhone

Similar Questions

  • If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

    If I sell my iPhone 6, indicating the error 53, for parts, should I worry about the person buying it have some sort of access to the personal data registered on this phone?

    Hello error 53 matched a UN failure to the home button you had to replace the screen or the home button alone or outside apple store so if you replace the button man of origin and you restored the iPhone error will be fixed but if you sell the buyer has no access to the data of the iPhone

  • the installation of itune + quick time I get a message that reads "no can access network location % data%\ app. »

    had 2 users on the computer with itunes on the desktop. main user itunes has stopped working, but the secondary users still worked. tried to update software with the latest version but get a message that reads "not access network location % data%\ app.

    This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is in http://support.microsoft.com/default.aspx/kb/886549.

    The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry way to create a point in http://www.howtogeek.com/howto/windows-vista/create-a-restore-point-for-windows-vistas-system-restore/ restoration system just to be on the safe side.

    Here are the steps to fix it.

    1. click on start, run, type regedit in the Open box, and then click OK.

    2. look for the following registry key:

    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

    3 remove the entries that show the path that is listed in the error message.

    886549 KB http://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point to new, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, click change, type the value in the value data for the value name box, and then click OK. The value data must be: % USERPROFILE%\AppData\Roaming. Change it if necessary.

    Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key.  If this does not work without the full procedure, follow ALL the steps in the referenced article.

    I hope this helps.  If not, post back with the results of what you tried.  Rear post anyway so we will know what happened.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Campus solution 9.0: the process of access to demographic data MSK_CFG

    People,


    Hello. I'm working on 9.0 Solution on a University Campus. I'm working on the module of Community Campus. I face a problem like below:


    Campus Community > personal information > add/update a person


    I can type in all the information for a person successfully and save it with success. But what research, it does not return anything to PS user
    This is because the security of access to demographic data is not granted to the user. So, I put security as below:


    Step 1:

    Set Up AWAR > Security > Secure Student Administration > permissions list > access to demographic data: I have select permission list HCPPALL and EOEI9200 for the PS user

    Step 2:

    Set Up SACRED > Security > Secure Student Administration > process > access to demographics: the process to initialize the authorization indicates to the user PS process program is the Application Engine. The process name is MSK_CFG. The process is not successful and returns an error as below:

    Table or view does not exist. Has no SQL statement: Truncate Table USER.PS_MSK_CFG_TAO4.

    I guess that some parameters are not set correctly. I checked the HRMS configuration > System Administration > utility > Search/Match results > search search results for Code PSCS_TRAD_RESUL and I tried component SCC_BIO_DEMO used in the Transaction. But the process of MSK_CFG has got the same error.


    I checked the application designer, the MSK_CFG_TAO table is a temporary table with 4 fields. I run the SQL to SQL statement > as below:

    SQL > select * from the user. MSK_CFG_TAO;
    SQL > select * from user.PS_MSK_CFG_TAO;
    SQL > select * from user.PS_MSK_CFG_TAO4;

    All the 3 tables above are non-existent. I do not understand how to handle this kind of error.

    My question is:

    How to solve the Temorary MSK_CFG_TAO and PS_MSK_CFG_TAO tables are not exist in SQL > while MSK_CFG_TAO is in application designer?


    Thanks in advance.

    This is a TFTP specific problem/question that was posted in the correct forum - people with experience TFTP are better equipped to answer your question

  • shortcut to access the 'personal bar '.

    It might be smart if you access it "Personal bar" keyboard shortcut
    If we say the shortcut was "ALT + B".
    You are now on the toolbar "bookmarks".
    "Here you have a few bookmarks" often used "-lets say: 'Google Maps', 'Youtube', 'IMDb', 'Facebook', 'mozilla '.

    Now imagine how easy you can get for example Youtube:
    Just tab 'Alt + B', then 'Y' (for the Youtube-bookmark)

    because it is a mainly managed by the community support forum is probably not the right place for the characteristics of the request (we are unable to implement all the features & devs read here).
    Please use https://input.mozilla.org/feedback for either your reactions or if you think that it is a missing feature in the browser file a bug at bugzilla.mozilla.org. Thank you!

  • I would like to know how to encrypt the phone to stop access to my data

    I'm fine back my iPhone 5 for a 6sPlus of the iPhone. Before doing so, I would like to know how to encrypt the phone to stop access to my data. I was told that everything simply erase the data without actually deleting...

    < re-titled by host >

    What to do before you sell or give away your iPhone, iPad or iPod...

  • my other computer has an icon in the taskbar to access the personas. This computer does not display an icon or a shortcut to access the personas. I have the latest version. Why is there no shortcut to access the characters?

    on a computer last year I updated firefox and he gave me an icon on my lower left side of the taskbar to access the personas. It was a cute little Fox. This computer that I use now not never showed an icon anywhere, or shortcuts, access to personas. I click firefox to watch. Why? I like to use.

    This has happened

    Don't know how many times

    is always

    There is no element of Personas menu in tools, unless you have the Personas Plus extension. In Firefox 3.6, Personas installed is selected using tools > Addons > > themes.

  • Screw access to private data class: concave or not?

    I just created (my German translation) in a class of the screws for the access to private data. I refer to these screws, allowing you to connect your class object to a node property to read or write data from the private class. These screws are by default non-reentrant. My question is: what happens if I try to access the two objects of the same class with these property nodes? Must the second object wait the first be read? If Yes, can I work around this by making these screws reentrant?

    Kind regards

    Marc

    Yes the theory. In practice this depends on what you do behind closed doors, the method and the methods that it calls.

    Ben

  • Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

    Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

    The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

  • ErrorCode A97 installation: Microsoft® Office Access Runtime and Data Connectivity 2007 Service Pack 2 (SP2)

    How to avoid this update (it retains pupping upwards each time).

    Hello Marcel.Pont,

    Follow the steps below to solve the problem:

    1. Start - Control Panel - programs and features - in the left pane, click View installed updates - uninstall Microsoft Office Access Runtime and Data Connectivity 2007 Service Pack 2 (SP2) update.

    2 restart the computer.

    3. download the updated Microsoft Office Access Runtime and Data Connectivity 2007 Service Pack 2 (SP2) manually from the link below and install it:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=6F4EDEED-D83F-4C31-AE67-458AE365D420&displaylang=en

    Samantha M S

  • No access to the data of a partition of a disk

    Windows Vista automatically starts the repair of my D: drive. Many errors have been reported and fixed.

    I now see the D: drive in the Windows Explorer, but no access to the data on D: is possible. The bar that shows the used/free space is not shown. A second partition on the hard drive works fine.

    In disk management I find D: drive with all the information on the used/free space, no error is reported.

    No idea how to fix?

    Any help is cordial welcome.

    Your machine to HD will have a free test bootable utility, for example WD SeaTools

  • Another computer can access my personal files across the LAN?

    Some background info: I moved into my dorm to the school a few months ago and I'll use the dormitory internet via lan cable in my room. I'll also put ad hoc internet connection for my phone. Recently, I realized in the "computer > network" I am able to see a list of computers and media devices that is connected to the network "dormitory" via the lan cable. I had problems that these users may be able to see my computer and access my personal files.

    I went to check my 'advanced sharing settings' and these are the following parameters, I had put: ' network discovery: on ', ' files and printers sharing: on "," public folder sharing: on "and finally" Sharing password protected: on»
    Since the discovery of the 'network' is on, my computer can be seen on the network too. I realized my "files and printers sharing" and "public folder sharing" was also lit and I was more worried about my computer being easily accessible by others in the dormitory network. However as my password protected sharing is turned on also, is it still possible for other computers to access my computer and my personal files?
    Thank you for your kind attention

    In the centre network and sharing, make your network a "Public network" rather than a "home network" or "work network".

    This should have the effect to make the following settings in 'advanced sharing settings.

    • Discovery - Off network
    • Files and printers sharing - Off
    • Public folder sharing - Off

    If these parameters only to not configure this way, when you changed in 'Public network', to do so.

  • Lost access to local data store

    Hi people:

    I have ESXi 6.0 running on an Intel S2600CWTS motherboard using the LSI SAS controller onboard and six readers Samsung 850 Pro SSD in a RAID 5 configuration.  This server is about a month and a half, and it worked fine for the first month, but in the last few weeks I started to do in the case where journal messages saying that ESXi has lost access to the data store, then, most of the time, about 15 seconds later access is restored.   Several times it took more time, which one crashed the server.  On these long, the motherboard Intel event log showed that a player had failed and began a regeneration and once the motherboard has shown that two different drives had failed, and it took both offline originally ESXi crashing.  On it that I was able to bring the two records back online via the RAID bios and everything worked fine again.  I suspect that I have hard disk problems because these discs are new and because different readers have been reported as failed, and also because no data has been lost even if 2 drives went offline at the same time.   I guess I could have a bad controller LSI, or a cable has come loose somewhere, but I expect to happen if it is really the case of data loss.

    I also noticed that lost access messages tend to appear in the log at the moment I start a virtual machine.  At first I thought that it would be one thing to flow, thinking a VM departure did a lot of IO, but this happens immediately, before even the bios of the virtual screen machine disappears, so I don't think that the virtual machine is actually reading the disc again.  In addition, as a precaution, I started the migration of some virtual machines on the server to the old server I still had available, and there is no lost access messages in the event log while that was happening, while about 50 megabytes per second of i/o has reached the disk during transfers.  I put the last patch on ESXi in mid-May, about two weeks before this started, and I begin to suspect that the patch may have something to do with it, because it seems to me that if something is happening between ESXi and the disk controller making hang up or lose interruptions during a short period of time , and I wonder if it goes pretty long if material in the motherboard sensors interpret this as some sort of hardware and simply brand failure according to readers I / O was hooked as bad then.

    Unfortunately I'm out of town now so I wanted more I had to the remote server, lest I do not not get back to the top.  I moved a couple of the most critical virtual machines from the old server which I was remotely start and transfer to virtual machines.  I also noticed that this issue tended to occur more frequently when I got to the top of the VCenter Server apparatus that any other (sometimes to others, but has happened every time I tried to start the device VCenter).  So who was the first that I moved to the old server, but strangely enough there is no error logged when I transferred the files, so the issue is not that ESXi had trouble reading the VMs vmdk file when I started it.

    I also wanted to ask you if there are any vibs for the LSI Megaraid controller on motherboard S2600CWTS I could install that would allow me to access the RAID controller without having to pick up the server and do it from the BIOS configuration screens, similar to how you can access the controller RAID from Dell while ESXi is running via a vib add-on.  So far I have not found one.

    My intention when I go to the server is to run an integrity check against the RAID 5 array via the controller and then use the AIMÉ ESXi utility on the data store to see if something is wrong here.  If not, then I guess I'll rewritten can patch.

    Ideas or suggestions welcome.

    Success!  I finally understood what the problem was corrected.  The problem is the fact that although the last vib driver LSI has been installed, for some reason any it would not automatically replace the default ESXi pilot lsi_mr3.  I did not notice that even though the latest driver package vib properly installed LSI controller was still using the original driver.  This could be considered by a 'esxcfg-scsidev - a' command showed that even "vmhba1 lsi_mr3 link-n/a sas.5001e67ca647e000 (0000:0: 00.0) controller LSI MegaRAID SAS Fury."  The second field after the controller (vmhba1) is the current manager used.  The pilot, which was to be used was: "vmhba1 megaraid_sas link-n/a unknown.vmhba (0000:03:00.0) Avago (LSI / Symbios Logic) Invader MegaRAID SAS controller.

    To fix this I had to disable the lsi_mr3 driver so that ESXi is forced to use it.  The procedure to do is the following:

    (1) make sure you have the new EXSi driver you want to use already installed.  I assume that bad things would happen if you have disabled the only driver who could run your disk controller.  Use this command to view the drivers installed: "esxcli software vib list" and you should get something similar to the following:

    [root@intelserver:~] esxcli list of software of vib

    Name Version Date seller installation acceptance level

    -----------------------------  ------------------------------------  ------  ----------------  ------------

    MegaRAID SCSI-sas 6.608.11.00 - 1OEM.600.0.0.2494585 Avago VMwareCertified 2015-07-19

    LSI - mr3 6.606.10.00 - 1OEM.550.0.0.1391871 LSI VMwareCertified 2015-06-19

    mtip32xx-native 3.8.5 - 1vmw.600.0.0.2494585 VMWARE VMwareCertified 2015-04-28

    ATA-pata-amd 0.3.10 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-atiixp 0.4.6 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-cmd64x 0.2.5 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-hpt3x2n 0.3.4 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-pdc2027x 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-serverworks 0.4.3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-sil680 0.4.8 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    ATA-pata-via 0.3.3 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    block-cciss 3.6.14 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    CPU-microcode 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

    EHCI-ehci-hcd 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    elxnet 10.2.309.6v - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    Emulex-10.2.309.6v - 0.0.2494585 VMwareCertified-2015-04-28 VMware esx-elxnetcli

    ESX-based 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

    ESX-dvfilter-credits-fastpath 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

    ESX-tboot 6.0.0 - 0.0.2494585 VMware VMwareCertified-2015-04-28

    6.0.0 - 0.0.2494585 of xserver-ESX VMware VMwareCertified 2015 - 04 - 28

    IMA-qla4xxx 2.02.18 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    IPMI-ipmi-devintf 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    IPMI-ipmi-paremeter 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    IPMI-ipmi-TR-drv 39, 1 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    LPFC 10.2.309.8 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    LSI-msgpt3 06.255.12.00 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    LSU-hp-hpsa-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    LSU-lsi-lsi-mr3-plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

    LSU-lsi-lsi-msgpt3-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    LSU lsi megaraid sas plugin 1.0.0 - 2vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

    LSU-lsi-mpt2sas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    LSU-lsi-mptsas-plugin 1.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    Misc-cnic-register 1.78.75.v60.7 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    Misc-pilots 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

    NET-bnx2 2.2.4f.v60.10 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-bnx2x 1.78.80.v60.12 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-cnic 1.78.76.v60.13 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-e1000 8.0.3.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-e1000e 2.5.4 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-enic 2.1.2.38 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-forcedeth 0, 61 - 2vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-igb 5.0.5.1.1 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    NET-IGB 3.7.13.7.14iov - 20vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-mlx4-core 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-mlx4-en 1.9.7.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-nx-nic 5.0.621 - 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-tg3 3.131d.v60.4 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    NET-vmxnet3 1.1.3.0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    nmlx4-core 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    nmlx4-en 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    nmlx4-rdma 3.0.0.0 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    nVMe 1.0e.0.35 - 1vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    OHCI-usb-ohci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    qlnativefc 2.0.12.0 - 5vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    REST 2.0.2.0088 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    Ahci SATA 3, 0 - 21vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

    ATA-SATA-piix 2: 12 - 10vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    NV-sata-SATA 3, 5 - 4vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    SATA-sata-promise 2: 12 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SATA-sata-sil24 1, 1 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SATA-sata-sil 2, 3 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SATA-sata-svw 2, 3 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-aacraid 1.1.5.1 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-adp94xx 1.0.8.12 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-3, 1 - aic79xx 5vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-bnx2fc 1.78.78.v60.8 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-bnx2i 2.78.76.v60.8 - 1vmw.600.0.11.2809209 VMware VMwareCertified 2015-07-21

    SCSI-DNI 1.5.0.45 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-hpsa 6.0.0.44 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-ips 7.12.05 - 4vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-megaraid-mbox 2.20.5.1 - 6vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-megaraid2 2.00.4 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-mpt2sas 19.00.00.00 - 1vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-mptsas 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-mptspi 4.23.01.00 - 9vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    SCSI-qla4xxx 5.01.03.2 - 7vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    UHCI-usb-uhci 1, 0 - 3vmw.600.0.0.2494585 VMware VMwareCertified-2015-04-28

    VMware-esx-dvfilter-maclearn-1, 00 1.00 VMware VMwareCertified 2015-05-12

    xHCI-xhci 1, 0 - 2vmw.600.0.0.2494585 VMware VMwareCertified 2015-04-28

    Tools-light 6.0.0 - 0.11.2809209 VMware VMwareCertified 2015-07-21

    [root@intelserver:~

    Verify that the scsi-megaraid-sas driver is installed before proceeding.

    (2) to disable the lsi_mr3 driver do the following: "esxcli set of module system - enabled = false - module = lsi_mr3 '

    (3) reboot

    After restarting, do: "esxcfg-scsidev - a" to check megaraid_sas driver is assigned to your disk controller.

    I don't know how ESXi decided to prioritize if two or more drivers are applicable to a single hardware device, or if the installation of the new driver LSI process is supposed to disable or remove default lsi_mr3 driver and simply failed to do so.  Also, I don't know what's going to happen when I put on the next patch of ESXi, specially if the lsi_mr3 driver will be once more the priority.  If anyone knows how the driver installation process is supposed to work in this situation, please let me know.  I am so happy that I finally got this problem because the server has been seriously covered with the data store become unaccessable for 5 to 10 seconds every time a VM started or stopped, and the former driver at least once done something bad enough to deceive the controller into thinking that one of the disks has went wrong and began a RAID Resync.

  • ColdFusion 11 allows the use of MS Access 32-bit data sources?

    ColdFusion 11 allows the use of MS Access 32-bit data sources?

    Well well, my first rhetorical question: is 2014, why MS Access? MS SQL has free versions that are much faster and more stable than any version of MS Access, I have no problem of migration.

    Now to your question, 32 bit "should not be a factor." 64-bit applications can talk to most 32-bit applications through an API without too much difficulty. The only exception that I know are 32-bit applications that rely exclusively on the DLLs for their API - I don't "think" MS Access has this limitation. It was probably at least 15 years since I touched what whatsoever in dealing with MS Access so my hesitation to be clearer in my response. Good luck.

  • The results of F1-QUERY-how to restrict or to SQL with the role of access to the data?

    Hello

    With the help of CC & B 2.3.1.

    I'm configuration of a Zone of F1-OF-QUERY to get and display customer information as level account; the filter criteria will be Geo val SP.

    With our application, we use access to accounts and groups access to the data on users roles to restrict access to sensitive accounts, such as VIP.

    What keywords should I use in the SQL statement to limit the results only for group accounts to which access is included in the Dar of the user?

    Example: If the user has DAR 'STANDARD', it won't see accounts with group access 'VIP '.

    I tried unsucessfully: USER: USER ID,: USER_ID.

    Unsucessfull example:

    Select dar_cd, user_id, expire_dt
    of ci_dar_usr
    Where user_id =: USER_ID
    and expire_dt > =: F1

    Thks,

    Fabien

    Hi, Fabien,

    If you are looking to determine the current user in the box,
    the keyword to use is: USERID

    You can check the zone of F1 "F1-FAVSCR" for its use.

Maybe you are looking for