Access the token Machine and MachineId of Action Script

Similar Questions

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Is it possible to access the USB ports and a slot for card SDX?

  Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?

  Rotate the iMac autour to see ports.

• Data execution prevention-window Explorer error when I try to access the windows Explorer, and more particularly when I try to watch videos.

  Original title: data execution prevention-window Explorer error

  Data execution prevention launches when I try to access the windows Explorer, and more particularly when I try to watch videos. So I tried to turn off DEP for windows Explorer. Now, I can access my videos, but they all have text on them that says video PHOTO, & www.jpg.com. I have not downloaded new software recently, so I don't know where it comes from. I ran my antivirus sofware and malwarebytes, and my system is to come clean. How can I remove this from my videos? Thank you!

  This isn't how to diagnose and repair the DEP errors - especially not Windows Explorer DEP errors.

  But 6 days of inactivity and a link to an article of a MSE = automatic response.

• Parental control: I am the admin of the computer and the computer won't let me access the list allow and block my child's account

  I am the administrator of the computer and the computer won't let me access the list allow and block my child's account.  I'll bring my parental control password, click on my childs account, put parental controls, go to web filter and click on block some web sites, click on edit the allow and block list and the computer tells me that it is not able to make changes to parental controls settings and see the system administrator if the problem persists.

  Hi Ranw,

  ·        What is the error message when you try to change parental controls?

  ·        Have you been able to make any changes on this computer from your account earlier?

  You can follow the steps below and check if you can make changes to the parental controls on your computer.

  Step 1:

  Disable UAC (User Account Control) and check the result. Access the link below and follow the steps to disable UAC.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

   

  Step 2:

  I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account:http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account

  Check out the link below to check if the parental control is properly set:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

  I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

  The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

  I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

  Any idea what's going on?

  Original title: XP Mode Setup error

  Hi smithnr10,

   

   

  You must post your question in the TechNet forums because it caters to an audience of it professionals.

  To do this, you must consult the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

   

  Hope this helps!

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• VMware networking help - network bridge / to access the virtual machines form other pc

  I have a computer 'server' that had 4 VM launched on it.

  I need to connect to these virtual machines, all of which have their own IP addresses. I can ping the server or the host of a remote computer, but must be able to communicate with the virtual machines in the remote/client computerss.

  Can anyone offer insight?  I tried to set up an automatic bypass at one of the virtual machines

  Any thoughts?

  Sorry, I'm not sure I can follow you. In any case, what you're trying to do is to configure adaper network of the virtual machine as "Bridged" within the parameters of the virtual machine and then change network card settings in as guest OS:

  IP address: 192.168.1.21 (where 21 must be an unused IP address currently)
  Subnet mask: 255.255.255.0
  Def gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  André

• Get the IP of the virtual machine and MAC

  Hello

  I'm trying to get the IP of the virtual machine and the MAC one of my data centers.

  When I run that the following script two things happen:

  1. I don't see a vm in the output of the csv file.

  2. when I send the output to the quick PowrCLI I see only a mac and one IP address for virtual machines with network cards.

  Script

  ---------

  $MV = Get-Data Center $DC | Get-vmhost | Get - VM

  {foreach ($VM to $VMs)

  $VMx = get-view $VM.ID

  $HW = $VMx.guest.net

  foreach ($dev to $HW)

  {

  foreach ($ip in $dev.ipaddress)

  {

  $dev | Select

  @{Name = 'Name'; {Expression = {$vm.name}}.

  @{Name = 'IP address'; Expression is {$ip}},

  @{Name = 'MAC'; {Expression = {$dev.macaddress}} |

  Export-CSV VM - IP - Info.csv - NoTypeInfo

  }

  }

  }

  My console output, tested on a virtual machine with two external network cards and an internal interface "dummy".

  Name                               IP                                  MAC

  ----                                   --                                    ---

  VM1 192.168.1.1 00:50:56:xx:xx:xx

  VM1 192.168.2.1 00:50:56:xx:xx:xx

  VM1 192.x.x.xxx xx

  You see the addresses expected in summary using vSphere Client VM?

  Oh sorry, I forgot the PS 3.0 requirement.

  You can put all the entries in a table and export all at the end of the script.

  $out = @)
  $VMs = get-data center $DC | Get-vmhost | Get - VM
  {foreach ($VM to $VMs)
  $VMx = get-view $VM.ID
  $HW = $VMx.guest.net
  foreach ($dev to $HW)
  {
  foreach ($ip in $dev.ipaddress)
  {
  $out += $dev. Select @{Name = 'Name'; {Expression = {$vm.name}}, @{Name = 'IP address'; Expression = {$ip}}, @{Name = 'MAC'; {Expression = {$dev.macaddress}}
  }
  }
  }

  $out | Export-Csv - NoTypeInformation-Path ' VM - IP - Info.csv.

  Concerning

  Emanuel

• Connect physical hard disks to the virtual machine (and leave the data intact)

  Hello

  I'm looking to virtualize a SOHO headless server, that I use mainly for secure file storage.

  Currently, the system runs Linux installed on a small disc and has two drives 1.5 TB, used exclusively for data, in a cluster of ZFS mirroring. (I use the ZFS-fuse Linux-based application).

  I want virtualization for two reasons. One is to make administration easier and safer - avoid having to connect a keyboard and the physical monitor to the box from time to time. The other is that the machine is a bit more powerful to handle the load, and I'm hoping to make it work on other, more challenging tasks.

  Now, there is a catch. These discs are as highly important. I mean the data on them. What I need is to convert the current Linux system to a virtual machine, or re - install Linux on a virtual machine (don't like that), then connect the physical disks to the virtual machine as if they were actually connected.

  I certainly don't want to vmware touches those disks somehow.

  I've read the documentation, but I'm a noob when it comes to server virtualization and system engineering and don't quite understand if this is possible or not. These discs are not a SAN, they are physically connected to the server, I want to install vSphere on. (Of course, I'll log out when I run the setup of vSphere. But I need plug them again later, and they need to be sure that vmware will leave them alone and pass them to the virtual machine transparent.)

  Sigmoid wrote:

  Oh yes, the cluster mirrored ZFS. It is essentially a software RAID type thingie.

  http://en.Wikipedia.org/wiki/ZFS

  A material, or the point of view of virtualization, it appears two hard drives with a single huge partition on each that is not transparent to anyone, except the implementation of ZFS.

  OK, means that you can break the RAID, connect the drives to different host and configure RAID once again, right?

  Let's do it this way

  1. We will need a disc player more for VM, cause on flash, we install ESXi
  2. I will share ZFS :-), all you need to do with that before you install ESXi
  3. make the BACKUP!
  4. Disconnect the data host drives
  5. install ESXi 4.1 U1 free version on flash
  6. Download the site VMware vSphere client
  7. Connect the VM disk to ESXi
  8. customer help create the virtual machine and install the OS on it
  9. stop the virtual machine and esxi
  10. connect DATA drives to the ESXi host
  11. begin to ESXi
  12. See how to add RDM on youtube, after client use, change first hardware VM--> add a new hard disk--> choose Raw Device Mapping--> (physical or virtual) mode--> store it with folder VM - FACT
  13. Start the virtual machine, now your VM should see both drives, with good data course :-)

  I have just made this procedure (add ROW with data in Linux VM) on ubuntu VM, works well

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• To access the virtual machines of two different hosts

  Greetings,

  I have a question that I can't find the answer to. I am setting up a virtual machine environment small and need to better understand the architecture behind it.

  2 host servers

  1 iSCSI Equallogic San (target)

  I have installed 35i ESX and runnning on two physical hosts. .205 et.206

  I created a data store on my SAN to host my 'model' VM.

  De.205, I can see the data on the SAN network store and browse the virtual machine I (using VMConverter) moved there.

  De.206, I can see the data store on the SAN, but when I sail, I do not see the same information. I see no. VM.

  MY understanding is that using the SAN to store the virtual machine and that I would make the hosts of this data store to run the virtual machine. But the way in which it seems that I have the virtual machine configured on both hosts, always pointing the data store on the San but again using converter, copy de.205 vers.206.

  What don't understand me or that I don't understand.

  Your help is appreciated.

  Welcome to the VMware community forums.   If you have configured things Ok, you will be able to browse the data from these two hosts store and see the same content.  You can register the virtual computers on both hosts.  For an existing VM on the host from 1, you find the data on the host of the 2nd store, right-click on the VMX file and select Add to the inventory.  Have you thought to vcenter server?  It's going to do it is a lot easier.

• Password is now required to access the virtual machines

  I ran Money 98 on my laptop working for the last 2 years (in fact since 1998 on other computers) and from 07/10/2014 when I try to open Money 98 Windows asks for a password. I have not configured this virtual machine, and I do not think that a password has been set up. I really need access to this program, 16 years of financial info desperately needed for the work. Help please.

  Hello

  Would you repost with kindness that your Question in Forum money Microsoft for assistance with money issues:

  https://social.Microsoft.com/forums/en-us/home?Forum=money

  See you soon.

• Automate the deployment of iso on the virtual machine and configuration following the

  I need to:

  1. create a virtual machine with a certain configuration

  2 specify an iso file to be connected to the power on.

  3. the need to have access to the console after plugging on.

  I know that #1 and #2 are possible using the CLI. I need to know if #3 is possible.

  
  

  I need to deploy a custom on the virtual computer operating system and must have access to the console to use options in the CLI of the target VM.

  
  

  
  

  TIA
  

  When you say that access to the console after poweron, do you mean open the console automatically? If this is the case, then you can use the Open-VMConsoleWindow cmdlet. It will automatically open the console of the virtual machine in WebClient.

  If you want to automatically run commands inside the virtual machine then use Invoke-VMScript cmdlet.

  Please let me know if this is what you're looking for or something else.

• Dedicated network adapter to the virtual machine and the host computer not let can visit his profile

  OK, here's my question, I know how to give themselves a phyiscal nic to a vmware, but I wanted to take it one step further and do not leave the host send or receive data from this network card, only the virtual machine can use this network/NIC...

  Here's my reasoning, I have to network conections, one is for my internal/field network and the second is a direct connection to the internet (Comcast) I don't want to use to separate the machines have for internet connection, I want to be on the same machine phyiscal and have just the vmware machine talking to comcast... is it possible?  I am running VMware workstation 7, last update.

  Thank you

  Cdrshm

  I assume you are using a Windows host?

  If Yes...

  -first set up networking networking with vmnetcfg.exe

  -assign vmnet0 to the network card for the internal network

  -assign vmnet2 to the network card used for direct access to the internet

  -Right-click on the map network-icon in the systray and access the properties of the network adapter for vmnet2

  -Disable all other protocols and the Protocol of vmware_bridge for this network adapter

  result: a virtual machine that uses vmnet2 can directly access the internet and the host has no IP address for this network adapter - and therefore cannot use it.

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual