Access to a remote network through VPN remote access
Hello
I'm having a problem with users who access VPN from home. We currently have 3 offices facility, as shown below. When I VPN in the Philadelphia office, I am unable to access the resources of Connecticut offices or North Carolina.
The VPN subnet is 192.168.10.0. Inside the office of the PA, I have no problem with NC or CT. I have to add a static route from the Pennsylvania Treasury and NC? If so, could you give me a hand with the correct syntax?
Office <-----------IPSecVPN---------->Office <------------IPSecVPN------------->Office of Connecticut from Pennsylvania, North Carolina
192.168.5.0 192.168.1.0 192.168.2.0
Hello
Yes, basically the ASA accommodation the customer VPN service in this case well enough is the same configuration related to two sites with the exception of course which is obvious
- Networks/subnets
- Different ACL for each VPN L2L
Although naturally the problem for me is the WRVS4400N configuration.
Basically, you do the same things on this unit than the other remote site.
You add the VPN pool as another remote network for VPN L2L configurations. You also confirm that there is operation NAT0 for this network also. I don't know I can help you there as I do not know the device.
Can you please mark it as answered and evaluate other useful answers
Naturally ask for more and I'll try to help you if I can
-Jouni
------------IPSecVPN------------->-----------IPSecVPN---------->
Tags: Cisco Security
Similar Questions
-
Access another network through VPN
Hello, currently we have an easy vpn server in one of our sites. Remote users can access the LAN (172.17.x.x) through the VPN. Is it possible to access another network (192.168.2.x) via the same VPN connection? Please see the network diagram.
Kind regards
Tony
Hello Tony
Thank you for the config and details
I've done the configuration in the assumption that the new subnet to which the VPN users wants to access is 192.168.2.0/24 and is behind the router Dlink
VPN SERVER
----------------NZEV extended IP access list
permit ip 192.168.2.0 0.0.0.255 anyaccess-list 120 deny ip 192.168.2.0 0.0.0.255 10.0.0.0 0.0.0.255
access-list 120 deny ip 192.168.2.0 0.0.0.255 192.168.25.0 0.255.255.255access-list 121 allow ip 10.0.0.0 0.255.255.255 192.168.2.0 0.0.0.255
access-list 122 allow ip 192.168.25.0 0.0.0.255 192.168.2.0 0.0.0.255IP route 192.168.2.0 255.255.255.0 172.17.0.6
CISCO router
------------
IP route 192.168.2.0 255.255.255.0 172.21.100.1
IP route 10.0.0.0 255.0.0.0 172.17.0.71
IP route 192.168.25.0 255.255.255.0 172.17.0.71Router DLink
---------------
IP route 10.0.0.0 255.0.0.0 172.21.100.2
IP route 192.168.25.0 255.255.255.0 172.21.100.2Please let me know if you have any other questions
Harish.
be sure to note all the useful messages!
-
Network Concentrator VPN access.
We have a 3000 Concentrator and is configured with a remote vpn on it. All inside network is allowed once a connceted to the vpn user. It is quite behind firewalls. I can access an external IP.
But I can't log in to the vpn from the inside network. I can ping the public interface; but when I try to log in from the client, the server report displays no records to my IP.
Why can't I connect from the inside?
Thank you
= Internal network = Concentrator VPN = FW = off-grid
Why try you to VPN from the inside? The purpose of the VPN is to encrypt the traffic between your PC over the internet to the VPN concentrator, once traffic arrives to your VPN concentrator, it is decrypted, and he'll be in the clear to your internal network.
So, what's the purpose of attempting to connect from the network Cabinet?
The reason why it does not work is because of the delivery. You are on the internal network, while traffic will exit to the firewall and return by the same firewall to connect to the public interface of the VPN concentrator, which is why it does not work and if the goal is access to the internal network, you are already inside the network which complicates things as your ip pool must then be routed to the inside.
Hope that makes sense.
-
All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?
Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.
Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?
Laughing out loud
-
How do .1x port based authentication access network through ACS
How .1x port based authentication access network through ACS.
Hello
802. 1 x can authenticate the host or by the name of username/password, or either through the MAC address of the clients (PC, printers etc.). This process is called agentless network access that can be done via Mac Auth Bypass.
In this process, the switchport 802.1 x would send the address MAC PC's connected to the server radius for authentication. If the radius server has the MAC address in its database, authentication will be successful and the PC would be granted network access.
To check the configuration on GBA 4.x, you can go to http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_ser...
To check the configuration on a CBS 5.x, you can go to http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_contro...
Kind regards
Kush
-
Cant' network with VPN card readers
Hello!
Here at my company in recent weeks, that some problems came with somes user not being able to access the network through the VPN connection drives.
If I delete all network drives and try to map them in the normal way (Tools > map network drive) I get a "extended error has occurred", but if I force using the "connect using a different user name" and putting the user domain\username and password of the person using the computer, it maps the network drive without problem... until the next reboot.
So, I repeat it, everywhere.
There is no password stored in the password manager Windows.
I remove from the registry, the keys to MapPointings2.Can someone help me?
They are all WinXp.
Thank you!
Hello
The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads -
I use the HP LaserJet 5100 printer.
I want to send the .ps file to the network through the on-board system postscript printer (the ARM Cortex microcontroller is used and the TCP/IP stack is worn).
I am able to send the file .ps for postscript using the windows system network printer and the file goes to the printer.
When the .ps file is sent to the printer by using the command line: copy test.ps\\printer_server\printer_port, is the driver is come into picture.
Please help me.
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
-
Hello my dear
I would like to ask how to change the binding of the network through the powershell command or back order.
I know it could be changed as below.
http://Windows.Microsoft.com/en-GB/Windows/change-network-protocol-bindings-order#1TC=Windows-7
but I want to change it via text command. Because sometimes, I change it many servers via GUI and then happened a long time depending on the amount of servers.
If it can be modified it using the command text, or registry, it will be useful for me.
Thank you.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers) -
How to create a link to a PDF file on a network through DPS Server
Is it possible to create a link to a PDF file on a network through DPS Server?
I know that you can use hyperlinks to create links that jump to Web sites, other realized, but I don't see anything on PDF files on a network share.
Anyone know if this is possible?
Incorporate him in the folio via HTMLResources or link to it on the web.
-
Cannot access remote network via VPN
Hello
I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
There is also a public oriented Web server in the office which must be accessible.I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.
I'm quite puzzled as to why it does not work. Please could someone help.
The results of tests and the router configuration are listed below. Please let me know if you need additional information.
Thank you and best regards,
Simon1. routing on the router table
Router #sh ip route
Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
C XXX.yyy.zzz.192 is directly connected, Vlan10
GGG.hhh.125.0/32 is divided into subnets, subnets 1
C GGG.HHH.125.34 is directly connected, Dialer0
172.16.0.0/32 is divided into subnets, subnets 1
S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
S * 0.0.0.0/0 [1/0] via ggg.hhh.125.342. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
> ping 172.16.100.1
Ping 172.16.100.1 with 32 bytes of data:
Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 2553. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
> ping 172.16.100.10
Ping 172.16.100.10 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.4. ping the router to the successful local server
router #ping 172.16.100.10
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms5 see the version
Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
the availability of router is 1 hour, 9 minutes
System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
10 FastEthernet interfaces
1 ISDN basic rate interface
Configuration register is 0 x 21026. router Config
AAA authentication login default local
connection of local AAA VPN authentication.
AAA authorization exec default local
local authorization AAA VPN network
!
!
AAA - the id of the joint session
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto ASI_Group
key mykey
DNS aaa.bbb.cccc.ddd
domain mydomain.com
pool VPN_Pool
ACL VPN_ACL
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
!
crypto dynamic-map 10 DYNMAP
game of transformation-TS1
market arriere-route
!
!
list of authentication of VPN client VPN crypto card
card crypto VPN VPN isakmp authorization list
crypto map VPN client configuration address respond
card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
!
!
!
IP cef
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
username admin privilege 15 password mypassword
Archives
The config log
hidekeys
!
!
!
!
!
interface FastEthernet0
WAN description
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
automatic duplex
automatic speed
PPPoE enable global group
PPPoE-client dial-pool-number 1
!
interface FastEthernet2
Description Public_LAN_Interface
switchport access vlan 10
full duplex
Speed 100
!
FastEthernet6 interface
Description Private_LAN_Interface
switchport access vlan 100
full duplex
Speed 100
!
interface Vlan1
no ip address
!
interface Vlan10
Public description
IP address xxx.yyy.zzz.193 255.255.255.248
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Vlan100
172.16.100.1 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Dialer0
IP unnumbered Vlan10
no ip unreachable
IP mtu 1452
IP virtual-reassembly
encapsulation ppp
no ip mroute-cache
Dialer pool 1
Dialer-Group 1
Authentication callin PPP chap Protocol
PPP chap hostname myhostname
PPP chap password mychappassword
PPP ipcp dns request accept
failure to track PPP ipcp
PPP ipcp address accept
VPN crypto card
!
IP pool local VPN_Pool 172.16.100.50 172.16.100.60
!
!
no ip address of the http server
no ip http secure server
!
VPN_ACL extended IP access list
IP 172.16.100.0 allow 0.0.0.255 any
!
Dialer-list 1 ip protocol allow
not run cdp
!
!Simon,
Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.
Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.
Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like
IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255
219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255
Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.
I hope this helps.
Luis Raga
-
Cannot access remote network by VPN Site to Site ASA
Hello everyone
First of all I must say that I have configured the VPN site-to site a million times before. Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks
ASA local:
hostname gyd - asa
domain bct.az
activate the encrypted password of XeY1QWHKPK75Y48j
XeY1QWHKPK75Y48j encrypted passwd
names of
DNS-guard
!
interface GigabitEthernet0/0
Shutdown
nameif vpnswc
security-level 0
IP 10.254.17.41 255.255.255.248
!
interface GigabitEthernet0/1
Vpn-turan-Baku description
nameif outside Baku
security-level 0
IP 10.254.17.9 255.255.255.248
!
interface GigabitEthernet0/2
Vpn-ganja description
nameif outside-Ganja
security-level 0
IP 10.254.17.17 255.255.255.248
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. * 255.255.255.0
!
interface GigabitEthernet0/3
Description BCT_Inside
nameif inside-Bct
security-level 100
IP 10.40.50.65 255.255.255.252
!
interface Management0/0
nameif management
security-level 100
IP 192.168.251.1 255.255.255.0
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
name-server 192.168.1.3
domain bct.az
permit same-security-traffic intra-interface
object-group network obj - 192.168.121.0
object-group network obj - 10.40.60.0
object-group network obj - 10.40.50.0
object-group network obj - 192.168.0.0
object-group network obj - 172.26.0.0
object-group network obj - 10.254.17.0
object-group network obj - 192.168.122.0
object-group service obj-tcp-eq-22
object-group network obj - 10.254.17.18
object-group network obj - 10.254.17.10
object-group network obj - 10.254.17.26
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
icmp_inside list extended access permit icmp any one
icmp_inside of access allowed any ip an extended list
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
RDP list extended access permit tcp any host 192.168.45.3 eq 3389
rdp extended permitted any one ip access list
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
pager lines 24
Enable logging
emblem of logging
recording of debug console
recording of debug trap
asdm of logging of information
Interior-Bct 192.168.1.27 host connection
flow-export destination inside-Bct 192.168.1.27 9996
vpnswc MTU 1500
outside Baku MTU 1500
outside-Ganja MTU 1500
MTU 1500 remote access
Interior-Bct MTU 1500
management of MTU 1500
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any outside Baku
ICMP allow access remotely
ICMP allow any interior-Bct
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
3 overall (RAS) interface
azans access-list NAT 3 (outside-Ganja)
NAT (remote access) 0 access-list sheep-vpn-city
NAT 3 list nat-vpn-internet access (remote access)
NAT (inside-Bct) 0-list of access inside_nat0_outbound
NAT (inside-Bct) 2-nat-ganja access list
NAT (inside-Bct) 1 access list nat
Access-group rdp on interface outside-Ganja
!
Router eigrp 2008
No Auto-resume
neighbor 10.254.17.10 interface outside Baku
neighbor 10.40.50.66 Interior-Bct interface
Network 10.40.50.64 255.255.255.252
Network 10.250.25.0 255.255.255.0
Network 10.254.17.8 255.255.255.248
Network 10.254.17.16 255.255.255.248
redistribute static
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede GANYMEDE +.
AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
key *.
AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
key *.
RADIUS protocol AAA-server TACACS1
AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
key *.
AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
key *.
authentication AAA ssh console LOCAL GANYMEDE
Console to enable AAA authentication RADIUS LOCAL
Console Telnet AAA authentication RADIUS LOCAL
AAA accounting ssh console GANYMEDE
Console Telnet accounting AAA GANYMEDE
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 Interior-Bct
http 192.168.139.0 255.255.255.0 Interior-Bct
http 192.168.0.0 255.255.255.0 Interior-Bct
Survey community SNMP-server host inside-Bct 192.168.1.27
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.10
card crypto mymap 10 transform-set RIGHT
correspondence address card crypto mymap 20 110
card crypto mymap 20 peers set 10.254.17.11
mymap 20 transform-set myset2 crypto card
card crypto mymap interface outside Baku
correspondence address card crypto ganja 10 110
10 ganja crypto map peer set 10.254.17.18
card crypto ganja 10 transform-set RIGHT
card crypto interface outside-Ganja ganja
correspondence address card crypto vpntest 20 110
peer set card crypto vpntest 20 10.250.25.1
newset vpntest 20 transform-set card crypto
card crypto vpntest interface vpnswc
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = gyd - asa .az .bct
sslvpnkeypair key pair
Configure CRL
map of crypto DefaultCertificateMap 10 ca certificatecrypto isakmp identity address
ISAKMP crypto enable vpnswc
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.0.0 255.255.255.0 Interior-Bct
SSH timeout 35
Console timeout 0
priority queue outside Baku
queue-limit 2046
TX-ring-limit 254
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.168.1.3
SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
SSL-trust ASDM_TrustPoint0 remote access point
WebVPN
turn on remote access
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal group ssl policy
attributes of group ssl policy
banner welcome to SW value
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
group-lock value SSL
WebVPN
value of the SPS URL-list
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the PFS
BCT.AZ value by default-field
ssl VPN-group-strategy
WebVPN
value of the SPS URL-list
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP retry threshold 20 keepalive 5
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
IPSec-attributes tunnel-group DefaultWEBVPNGroup
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.10 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.10
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type SSL tunnel-group remote access
attributes global-group-tunnel SSL
ssl address pool
Authentication (remote access) LOCAL servers group
Group Policy - by default-ssl
certificate-use-set-name username
Group-tunnel SSL webvpn-attributes
enable SSL group-alias
Group-url https://85. *. *. * / activate
tunnel-group 10.254.17.18 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.18
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.11 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.11
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type tunnel-group DefaultSWITGroup remote access
attributes global-tunnel-group DefaultSWITGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultSWITGroup
pre-shared key *.
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect the netbios
Review the ip options
class flow_export_cl
flow-export-type of event all the destination 192.168.1.27
class class by default
flow-export-type of event all the destination 192.168.1.27
Policy-map Voicepolicy
class voice
priority
The class data
police release 80000000
!
global service-policy global_policy
service-policy interface outside Baku Voicepolicy
context of prompt hostnameCryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
: end
GYD - asa #.ASA remote:
ASA Version 8.2 (3)
!
ciscoasa hostname
activate the encrypted password of XeY1QWHKPK75Y48j
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif inside
security-level 100
IP 192.168.80.14 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 10.254.17.11 255.255.255.248
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
no ip address
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
access-list 110 scope ip allow a whole
192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
management of MTU 1500
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0 access-list sheep
Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.9
mymap 10 transform-set myset2 crypto card
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPNtunnel-group 10.254.17.9 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.9
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostnameCryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
: end
ciscoasa # $Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas
Would appreciate any help. Thank you in advance...
If the tunnel is up (phase 1), but no traffic passing the best test is the following:
Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.
inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside
The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).
Test on both directions.
Please post the results.
Federico.
-
I had many problems to connect to remote servers, only set by trial and error. I forgot how I solved the problem last time (a year ago), but because the server was, I can access is more data - I suspect that this is a basic setting preventing laptop computer to interact with the service.
Hello
Thanks for posting your query in Microsoft Community.
The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
-
How to allow access to the external network of VPN through PPTP
Hi guys, this is probably a simple one, but I have not much firewall experience so any help is appreciated.
We would like to have the opportunity to connect to a private network virtual to a company, we have recently acquired. When you connect to it directly from the Internet (not), it is accessible. However, behind our firewall, there is no access. We use Cisco ASA 8.2 (2)
Currently, we have an entry as follows:
PPTP tcp service object-group
EQ pptp Port object
inside_access_in list extended access permit tcp any host object_name object-group PPTP
Please can anyone advise what else are required to complete what I'm not sure of what else is needed? Basically, we want any device within our network in order to access the VPN through PPTP.
Your help is appreciated
Kind regards
Hi Angelo,.
It should work when you make a pptp permitted and inspected. But will also Appreciate ACL with your firewall to the PPTP server.
The above documents helps you better understand.
Please assess whether the information provided is useful.
By
Knockaert
-
Need help to access the internal network via VPN on ASA5505 8.4 (1)
Recently, I upgraded my ASA5055 from 8.02 to 8.4 and since I have updated to the new version I can access my home network is no longer through the VPN. I can connect to the VPN with no problems however I can no longer ping or you connect to my network of 10.0. Someone would be kind enough to look at my config and tell me what needs to be added to make it work? In my old config, I had a statement of NAT for VPN that is no longer here.
I also wanted to configure WebVPN to work as well, and this is something that I've never been able to understand. Is it also possible that I can be on my 20.0 network and connect to the VPN and access 10.0 as well? When it is connected to my network of 20.0 I'm not received credentials to connect to the VPN. I would be grateful if someone can help out me. The major part of this is the first part of this question.
My configuration:
ASA Version 8.4 (1)
!
ASA5505 hostname
domain xxxxxxxx.dyndns.org
enable encrypted password xxxxxxxxxxxx
xxxxxxxxxxxxxxx encrypted passwd
names of
nameserver 192.168.10.2
Office of name 192.168.10.3
name Canon 192.168.10.5
name 192.168.10.6 mvix
name 192.168.10.7 xbox
name 192.168.10.8 dvr
name 192.168.10.9 bluray
name 192.168.10.10 lcd
name 192.168.10.11 mp620
name 192.168.10.12 kayla
name 192.168.1.1 asa5505
name 192.168.1.2 ap1
name 192.168.10.4 mvix2
name 192.168.10.13 lcd2
name 192.168.10.14 dvr2
!
interface Vlan1
nameif management
security-level 100
IP address asa5505 255.255.255.248
management only
!
interface Vlan2
0050.8db6.8287 Mac address
nameif outside
security-level 0
IP address dhcp setroute
!
interface Vlan10
nameif private
security-level 100
IP 192.168.10.1 255.255.255.224
!
interface Vlan20
nameif Public
security-level 100
IP 192.168.20.1 255.255.255.224
!
interface Ethernet0/0
Description pointing to WAN
switchport access vlan 2
!
interface Ethernet0/1
Uplink port Linksys 12 description
switchport access vlan 10
!
interface Ethernet0/2
Description Server 192.168.10.2/27
switchport access vlan 10
!
interface Ethernet0/3
Uplink Eth1 management description
!
interface Ethernet0/4
switchport access vlan 30
!
interface Ethernet0/5
switchport access vlan 30
!
interface Ethernet0/6
switchport access vlan 30
!
interface Ethernet0/7
Description of Cisco 1200 Access Point
switchport trunk allowed vlan 1,10,20
switchport trunk vlan 1 native
switchport mode trunk
!
Banner motd users only, all others must disconnect now!
boot system Disk0: / asa841 - k8.bin
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain xxxxxxx.dyndns.org
network object obj - 192.168.50.0
192.168.50.0 subnet 255.255.255.0
Server network objects
host 192.168.10.2
network object obj - 192.168.10.0
192.168.10.0 subnet 255.255.255.224
network object obj - 192.168.20.0
subnet 192.168.20.0 255.255.255.224
network server-01 object
host 192.168.10.2
network server-02 object
host 192.168.10.2
xbox network object
Home 192.168.10.7
xbox-01 network object
Home 192.168.10.7
xbox-02 network object
Home 192.168.10.7
xbox-03 network object
Home 192.168.10.7
xbox-04 network object
Home 192.168.10.7
network server-03 object
host 192.168.10.2
network server-04 object
host 192.168.10.2
network server-05 object
host 192.168.10.2
Desktop Network object
host 192.168.10.3
kayla network object
Home 192.168.10.12
Home_VPN_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
outside_access_in list extended access permit tcp any any eq 3389
outside_access_in list extended access permit tcp any any eq 2325
outside_access_in list extended access permit tcp any eq ftp server object
outside_access_in list extended access permit tcp any any eq 5851
outside_access_in list extended access udp allowed any any eq 5850
outside_access_in list extended access permit tcp any any eq pptp
outside_access_in list extended access udp allowed any any eq syslog
outside_access_in list extended access udp allowed any any eq 88
outside_access_in list extended access udp allowed any any eq 3074
outside_access_in list extended access permit tcp any any eq 3074
outside_access_in list extended access permit tcp any any eq field
outside_access_in list extended access udp allowed any any eq field
outside_access_in list extended access permitted tcp everything any https eq
outside_access_in list extended access permit tcp any eq ssh server object
outside_access_in list extended access permit tcp any any eq 2322
outside_access_in list extended access permit tcp any any eq 5900
outside_access_in list extended access permit icmp any any echo response
outside_access_in list extended access permit icmp any any source-quench
outside_access_in list extended access allow all unreachable icmp
outside_access_in list extended access permit icmp any one time exceed
outside_access_in list extended access udp allowed any any eq 5852
KaileY_splitTunnelAcl list standard access allowed 192.168.10.0 255.255.255.224
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer of 36000
logging warnings put in buffered memory
recording of debug trap
asdm of logging of information
address record [email protected] / * /
exploitation forest-address recipient [email protected] / * / level of errors
Management Server host forest
MTU 1500 management
Outside 1500 MTU
MTU 1500 private
MTU 1500 Public
local pool IPPOOL 192.168.50.2 - 192.168.50.10 255.255.255.0 IP mask
local pool VPN_POOL 192.168.100.2 - 192.168.100.10 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ASDM image disk0: / asdm - 641.bin
don't allow no asdm history
ARP timeout 14400
!
Server network objects
NAT (private, foreign) static tcp ftp 5851 service interface
network object obj - 192.168.10.0
NAT (private, foreign) dynamic interface
network object obj - 192.168.20.0
NAT (outside) dynamic public interface
network server-01 object
NAT (private, outside) interface static 2325 2325 tcp service
network server-02 object
NAT (private, outside) interface static udp syslog syslog service
xbox network object
NAT (private, outside) interface static service udp 88 88
xbox-01 network object
NAT (private, outside) interface static service udp 3074-3074
xbox-02 network object
NAT (private, outside) interface static service tcp 3074-3074
xbox-03 network object
NAT (private, outside) interface static tcp domain domain service
xbox-04 network object
field of the udp NAT (private, foreign) of the static interface function
network server-03 object
NAT (private, outside) interface static tcp https https service
network server-04 object
Static NAT (private, outside) interface service tcp ssh 2322
network server-05 object
NAT (private, outside) interface static 5900 5900 tcp service
Desktop Network object
NAT (private, outside) interface static service tcp 3389 3389
kayla network object
NAT (private, outside) interface static service udp 5852 5852
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.248 management
redirect http outside 80
location of SNMP server on the Office floor
SNMP Server contact [email protected] / * /
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
No vpn sysopt connection permit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto-map dynamic outside_dyn_map pfs set 20 Group1
Crypto-map dynamic outside_dyn_map 20 set transform-set ESP-3DES-SHA ikev1
life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds
Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.248 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 30
Console timeout 30
access to administration management
dhcpd dns 24.205.1.14 66.215.64.14
dhcpd ping_timeout 750
dhcpd field xxxxxxxx.dyndns.org
dhcpd outside auto_config
!
dhcpd manage 192.168.1.4 - 192.168.1.5
dhcpd enable management
!
dhcpd address private 192.168.10.20 - 192.168.10.30
enable private dhcpd
!
dhcpd 192.168.20.2 public address - 192.168.20.30
dhcpd enable Public
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.43.244.18
Server NTP 129.6.15.28
WebVPN
internal Home_VPN group strategy
attributes of Group Policy Home_VPN
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol without ssl-client
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list Home_VPN_splitTunnelAcl
value by default-field www.xxxxxx.com
the address value IPPOOL pools
WebVPN
the value of the URL - list ClientlessBookmark
political group internal kikou
group attributes political kikou
value of 8.8.8.8 DNS Server 4.2.2.2
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list KaileY_splitTunnelAcl
XXXXXXX.dyndns.org value by default-field
username scottrog encrypted password privilege 0 xxxxxxxxxxxxxx
user_name john encrypted password privilege 0 xxxxxxxxxxxxxxx
username joek encrypted password privilege 0 xxxxxxxxxxxx
eostrike encrypted xxxxxxxxxxxx privilege 15 password username
username almostsi encrypted password privilege 0 xxxxxxxxxxxxxx
username ezdelarosa password xxxxxxxxxxxxxxencrypted privilege 0
type tunnel-group Home_VPN remote access
attributes global-tunnel-group Home_VPN
IPPOOL address pool
LOCAL authority-server-group
authorization-server-group (outside LOCAL)
Group Policy - by default-Home_VPN
authorization required
IPSec-attributes tunnel-group Home_VPN
IKEv1 pre-shared-key *.
type tunnel-group SSLClientProfile remote access
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
tunnel-group type ClientLESS remote access
tunnel-group kanazoé type remote access
attributes global-tunnel-group kanazoé
address VPN_POOL pool
by default-group-policy kikou
tunnel-group KaileY ipsec-attributes
IKEv1 pre-shared-key *.
by default-group Home_VPN tunnel-Group-map
!
!
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:438ed6084bb3dc956574b1ce83f52b86
: end
ASA5505 #.
Here are the declarations of NAT for your first question:
network object obj - 192.168.100.0
255.255.255.0 subnet 192.168.100.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.50.0 obj - 192.168.50.0
NAT (private, foreign) source static obj - 192.168.10.0 obj - 192.168.10.0 destination static obj - 192.168.100.0 obj - 192.168.100.0
And 'clear xlate' after the above and that should fix your first question.
I would check your second question and get back to you shortly.
-
ASA 5510 worm. 8.2 (5) access through VPN without client management?
Hi all
I am completely new to networking Cisco and virtual private networks, I'm working on to the ASA 5510 8.2 (5) 46. Currently, the unit is set up very very little. Access to the administration are accessible from my home network to 192.168.2.1. I'm trying to enable management access remotely by VPN. I created a clientless SSL VPN, which, during the wizard process, access to the specified administration was the/admin adding to the VPN https url. Add the/admin in the url for VPN is not me the VPN connection, and by using the/admin url from the portal returns a message "not available". Also, from the portal I can't access the ASDM using inside IP network management, it also returns the message as "unavailable". Again, I'm new to this, any help would be greatly appreciated. Here is my config. and thank you!
: Saved : ASA Version 8.2(5)46 ! hostname ALP5510 enable password 8Ry2YjIyt7RRXU24 encrypted passwd 2KFQnbNIdI.2KYOU encrypted names ! interface Ethernet0/0 nameif outside security-level 0 ip address 99.66.203.148 255.255.255.248 ! interface Ethernet0/1 shutdown no nameif no security-level no ip address ! interface Ethernet0/2 shutdown no nameif no security-level no ip address ! interface Ethernet0/3 nameif inside security-level 100 ip address 192.168.2.1 255.255.255.0 ! interface Management0/0 nameif management security-level 100 ip address 192.168.1.1 255.255.255.0 management-only ! boot system disk0:/asa825-46-k8.bin ftp mode passive dns domain-lookup inside dns server-group DefaultDNS name-server 68.94.156.1 name-server 68.94.157.1 same-security-traffic permit inter-interface pager lines 24 logging asdm informational mtu outside 1500 mtu inside 1500 mtu management 1500 ip local pool vpn 192.168.2.10 no failover icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-714.bin no asdm history enable arp timeout 14400 global (outside) 101 interface nat (inside) 101 0.0.0.0 0.0.0.0 nat (management) 101 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 99.66.203.150 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http server session-timeout 20 http 192.168.1.0 255.255.255.0 management http 192.168.2.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.2.0 255.255.255.0 inside ssh timeout 5 console timeout 0 management-access inside dhcpd address 192.168.2.3-192.168.2.10 inside dhcpd dns 68.94.156.1 68.94.157.1 interface inside dhcpd enable inside ! dhcpd address 192.168.1.3-192.168.1.10 management dhcpd dns 68.94.156.1 68.94.157.1 interface management dhcpd enable management ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside enable inside group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn webvpn svc ask enable group-policy eng internal group-policy eng attributes vpn-tunnel-protocol webvpn webvpn url-list value EngineerBookmarks username user1 password mbO2jYs13AXlIAGa encrypted privilege 15 username user1 attributes vpn-group-policy eng webvpn url-list value EngineerBookmarks tunnel-group test type remote-access tunnel-group test general-attributes address-pool vpn tunnel-group Engineering type remote-access tunnel-group Engineering general-attributes default-group-policy eng ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options inspect icmp ! service-policy global_policy global prompt hostname context no call-home reporting anonymous Cryptochecksum:05f3afe3383542c8f62b1873421a7484 : end asdm image disk0:/asdm-714.bin asdm location 99.66.203.150 255.255.255.255 inside no asdm history enable
I'm TAC if you give me a number I can help you, I think we will extend that if we continue on the support forum
Maybe you are looking for
-
Satellite A500-1DN - high DPC latency resolved
Hi all! All first of all sorry for the bad English!I am writing because this problem drove me crazy in the half of the year. I got cracking audio etc. thanks for the high dpc latency time but finally I managed to understand how to clear my A500 these
-
Error BTTray: Unable to start Bluetooth Stack Service
I have an Envy 17 3D (product number: LV045UA #ABA). Recently, shortly after startup, I get an error to the effect that there is a BTTray error as it is unable to start bluetooth stack service. I use a Bluetooth Logitech mouse and the mouse continues
-
Read the size in pixels of the camera
Hello is it possible to read the size in pixels of a digital camera by programming with IMAQdx? e.g. Basler acA1300-30um ace: Horizontal/vertical pixel size3.75 x 3.75 µm µm Thanks in advance. Thomas
-
I tried to get a HSDL controller to work on my D20. It Dosent appear in the BIOS, during installation or in the management of devices, once windows installed on another drive. I tried the controller into another machine and it works fine. Any ideas?
-
Video 9.2.A.1.6 on Xperia M update hangs
The last update of video application makes the phone hang and the UI system shuts down accidentally while playing movies. The application also makes the phone a lot heat and drains the battery faster in this update from the previous version.