Access to multiple users on a desktop remotely

Similar Questions

• Impossible to support the user's virtual desktop remotely

  Hello

  I have a few question unable to support the computer remotely using vWorkspace management console. I get error "the following error occurred while shadowing session 2 on server xx.xx.xx.xx, this function is not supported in this system (120).»

  There is no recent change made broker server and am able to do support remotely to the desktop of the user without any problem. Can someone help me?

  Thank you.

  Hi Whosen,

  It is essentially an issue with differences between RDP7 and RDP8.
  Although you mention that has not changed, is it possible that it is the use of RDP7 instances, but fails on Instances of RDP8 news? It could also be related to Server 2012 for example.

  It is covered in the following Technical Support article:
  [See:support.software.dell.com/.../105537:550:0]

  I hope that it is of little help?

  See you soon,.
  Dave Caddick

• Multiple users, a Desktop view

  
  Hello!  I was responsible for the setting up of an office to view in a conference room that would be available for any user who needs.  We use Wyse P25 as zero customers.  My problem is this, is it possible to assign a desktop zero client and still allow a user to connect to windows on it?  I played with kiosk mode however I couldn't figure out how to allow multiple users to connect to this topic.  Any thoughts?  Most of my users have already access to a pool of office but which asked me to do, that separate this office conference room.  One thing I thought be set up a server connection of separate view with a floating desktop computer that is available for everyone however can two separate servers connection access to the resources of backend even at the same time?  (i.e. ESXi, vCenter, etc.)

  The setting you are looking for is the AllowSingleSignon policy. This deactivation will cause the VM to require authentication at the level of the office and will allow for the use you are looking for.

  More details on this setting can be found here:

  Display Agent Configuration ADM Template settings

  You will need to install the Agent ADM view model in AD and apply that policy to make it active. You can also assign the template to just the single virtual machine if necessary.

  -Mike

• Desktop remotely - the user name or password is incorrect

  I have a company Vista32 trying desktop remotely at a Vista64 company, I can see the login screen, but cannot open a session with the error msg "the user name or password is incorrect".

  Both enable remote desktop in the firewall.
  Both counts are the administrator account.

  Help appreciated.

  Hello

  The error message tells you everything.

  Verifier check in safe mode with networking, if successful, then try to clean boot.
  http://support.Microsoft.com/default.aspx/KB/929135

  Good luck $

• Cannot access through desktop remote after replacing the hard drive

  After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

  Hello

  I appreciate the efforts that you put to publish the query on this forum.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• Using filters Essbase to restrict access to OBIEE dashboards for multiple users

  Hello

  You can use Essbase filters to restrict access to the data in OBIEE dashboards so that users with no access to specific members are not able to see all data for multiple users.

  Any suggestions on how to go about it.

  Thank you!

  Hello

  Like any data source as an essbase.

  

  You can filter the data by the user, use a NQSESSION. to get the session the correct access.

  

  Kind regards

• I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected.

  issue license remote dekstop

  I have Windows Server 2008 R2. I have set up the desktop remotely for 5 users, but each time a user logged on to the other user will be disconnected. Is this a problem with the license? Is it how do I get license for 10 users remote desktop? Thank you

  You will get the best answers by posting in the dedicated remote desktop on TechNet Forum:

  Remote Desktop Forum services (Terminal Services)

• After you configure multiple users on the computer, not all accounts have access to all programs

  I have "cut" my computer so that there are currently 3 users, each with their own space programmes. The computer has always had Microsoft Office on it, and Word was part of the office. Two users have no word at their disposal, while the third user access to Word. How to do the first two Word users access. They are able to access other programs that are in the office.

  Hi Tom.Wi,

  
  1. are you able to access the other office applications two user accounts?
  2. have you selected the option to use the program for all users during installation of the Office program?
  
  Method 1:
  Try reinstalling the program by selecting the option to provide access to all user accounts.

   

  Method 2:
  If the problem persists, you can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  I hope this helps.

• El Capitan server has been updated to allow multiple users to GUI?

  Good afternoon

  We currently use a mini Server mac to run our software controller of AFN and we want it to be so that several people can manage the server of the Mini on their own connections. Is it possible that several people to connect with their own credentials to remotely?  While the account running the controller software that is connected, my attempts just go on forever.

  Several GUI users can mean many different things, but I think that the case more suitable for you, the following means.

  • Yes, multiple users can connect remotely by using screen to your Mac server sharing
  • They can each use a different user account to authenticate their connection
  • If they use another user account to authenticate their screen sharing connection, they offered the possibility of initiating a separate session, you will then get a prompt similar to the following

  

  • You would choose "Log In" to get a separate user session

  Note: Some applications such as Apple Remote Desktop administrator do not like to be used by multiple users on the same computer at the same time, other Applications may be ok.

• Is it possible to set up for multiple users on the same computer to avoid entering the e-mail and the password

  Original title: Multi users

  Is it possible to set up for multiple users on the same computer to avoid entering the email and password every time that a new user want to check emails?

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. According to the description, you need help in the creation of multiple user accounts. I've surely you will help find a solution on the issue.

  What is the operating system installed on the computer?

  User accounts, several people can easily share a single computer. Each person can have a separate user account with unique settings and preferences, such as a screen saver or desktop background. User accounts control files and programs users can access and what types of changes users can make to the computer. As a general rule, you'll want to create standard accounts for most computer users.

  If you use Windows Vista or Windows 7, see the article below:

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-in/Windows-Vista/create-a-user-account

  For Windows XP users:

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783?WA=wsignin1.0

  Hope this information helps. Answer please if you have more queries about Windows.

• Is it possible to use the desktop remotely without password?

  Hello, I have a question for remote desktop connection.

  I have two computer, computer (XP pro) and computer B.  And A computer user account has no password created.  My question is, if I activate the remote desktop on A computer (computer A user account has no password) and try to access it remotely from computer B, is it possible to connect? or should I set password of computer user account to access desktop remotely from another computer?

  If anyone can help me with the answer, I would really appreciate it!

  If your PC has no password and disable remote desktop is so they can access account, if it is disable remote desktop. By default, it's that do not allow access without password if you do not have password for Remote Desktop works by default unless you change the setting in the security policy that I posted.

  If Disable generator IP = remote desktop won't get to your PC

  If remote desktop enable no default = password cannot access but if change the security policy as I said can be accessed.

  You could try these different scenario by laptop and try to access your by using remote desktop.

• Fusion and multiple users

  Hello

  I hope someone can answer a few questions for me.

  I just installed Fusion 3 on an iMac with 4 users in my household. For one reason or another, we all need access to WinXP. I have admin rights and everyone has rights of the user.

  I installed the merger under my admin account, but when I change user and launch the merger, he seems to want to install XP.

  My questions are:

  (1) merger not allows to access XP from several user accounts? Not even a single user at a time?

  (2) otherwise, since it is the woman who has the most need for XP, is possible to move the virtual machine to its account, or do I have to perform another installation of XP?

  (3) if I need to perform another installation, it ruin things if I have XP/Fusion installed on my account and create another facility for her?

  Thank you

  This error message is related to the function of VMware shared folders (VMware Fusion (menu bar) > VM > settings... > sharing (under control panel)) and is apparently pointing to a file that other users have no access to or is they if, lets say, pointing to your desktop folder.  In other words if the shared folder of VMware will be used, then you must point to a location that all applications have access to.  Also note that the "Mirrored folders" feature should not be used when multiple users need to access/use the same Virtual Machine.

  Probably the best solution for the use of VMware shared folders with multiple users is to not use this feature and instead use native file Mac sharing in order to achieve this.  Unfortunately if you do not use the VMware Shared Folders functionality you can also not use the settings > Applications > default Applications features either.  The workaround for this is to use a share point common that all users have access to and then use native file sharing on the Mac to allow each user access to files in their home and the common share folder point that all users have access to the shared folder of VMware feature to use the settings under settings > Applications > default Applications

  Unfortunately, that's when the permissions are involved and we certainly won't give all permissions for everyone to (even if desired).

• Execution of multiple user profiles does not not in Firefox 32.0.3

  Hello.

  I have several profiles user for work and private use. Today I decided to use Firefox for private use again (currently using Chrome for private use). Because on Chrome, the video is "pixelated" when video quality is superior to 720 p. Also for purposes of stability, if Firefox crashes, which happens frequently, I keep everything.

  In any case, I use the Profile Manager for execution of multiple user profiles.

  The problem is when I try to open a private profile when you're already running a work profile, it opens a new window of work profile, not a private.

  I use this shortcut: "C:\Program Files (x 86) \Mozilla" P - by default - noremote
  The "default" profile is the work, I have a different shortcut, which is private:
  "C:\Program Files (x 86) \Mozilla ' private Pei - noremote

  Any help will be much appreciated. Thank you.

  Hello tgolisa, I think the right command line parameter is -no-remote...

• IMac is not able to share multimedia files with multiple users on the same computer.

  We just bought a new IMac that we were very excited.  We have phones Apple and iPads, replacement and ten year with a new Mac old PC made since.

  Now, the trouble begins. For more than ten years Windows had several usernames on the same machine and have been able to have a shared folder only for music, pictures and video that my iTunes program and others could acsess and share from several user names. This kept all in one place for new photos families by me or my wife and our 30 gigabytes of music that comes from our CDs was available at bolt of us. Now in train to implement on IMac should be easy but is impossible.  after transferring the music to my login information, it cannot acsess all files on my login. I am not even able to share or provide his acsess. I can move the iTunes folder to my shared folder. She can get acsess now but iTunes says that the library file is locked. I worked with care from Apple on the phone for that sold, but they believe it will not be possible without creating two copies of the 30 gigabytes of music for each of us. who would take more hard drive when it failed too.  Sharing is not any help. These files were before iTunes. I'm not pay 30 dollars a month to store in icloudcor use a google reader slow to the Internet connection when everything's fine here. Apparently Applow programmers do not believe in sharing of multimedia files between two users on the same device, even if a PC does that very well. My choice here is so far have duplicates of all the photos, music and videos loaded on the disc for me and my wife, charge all the media for an external hard drive which for some reason any all Apple programs will share, or return the mac to another PC that will be able to make several connections with sharing music and photos. Apple if you are reading this you are 10 years behind on that. Not everyone is born in the last five years and bought their music on iTunes to be able to use home sharing. Home sharing cannot help this. your applications should be able to be told to use the media files shared without import copies to readers of the user. I am very disappointed. Someone else has any ideas for that?  I have pictures, not iPhoto. I have a week more to be able to return it. I'm not interested in making a fake account that is always connected to share or maintaining of me constantly connected. It should have been easy, I had to be happy to play with new software.

  Photos, iPhoto and iTunes libraries must appear on an external hard drive that is formatted as shown below to be used by multiple users on the same Mac:

  

  So get a properly formatted external HD and move your iPhoto/pictures of her as well as your iTunes library.  This way all your iMac users can access and use both libraries.

  An alternative to the external HD method is to partition your internal hard drive into two partitions, one for libraries.  It is formatted as shown above and be large enough to contain the libraries and allow the expansion of libraries.

  

• How to support multiple users at the same time?

  Hi all

  I have a Labview program that controls a parser via GPIB connector. When the user uses the software, user B must wait is made. But in fact, the parser is not very busy, when the user uses the software.

  I want A, B, C and D of the user may use the software at the same time. just as we can open several Web sites at the same time.

  How can I program the software, so that software can be opened several times? Do you have any examples?

  Thank you very much.

  Steven

  Parallel SALVATION,

  you want to use the same material in different forums at the same time? What happens if the user uses a different device as user B setting?

  There could be problems to access the port of connection (GPIB card) at the same time too...

  It's the same usual problem, you'll have to any shared resource. Instead of calling the same software several times at the same time you should make your software up-to-date with multiple users...