Access to several cubes Essbase ASO through a single cube

Similar Questions

• Automate the calculation against Essbase ASO through the calculation Manager

  Hi all

  Anyone know if I can automate the calculation stored in calculation on a cube Essbase ASO Manager?

  I need calculation automated directly against an Essbase cube as it is not a planning application.

  I tried to use CalcMgrCmdLineLauncher.cmd , but it seems not to be able to find the application. I'm assuming that she tries to locate a planning instead of an application of Essbase application.

  Currently I have a number of calculation parameters in the calculation Manager but I would like to automate the process, as well as on a daily basis, the cube is rebuild and recalculated.

  Any ideas if CalcMgrCmdLineLauncher.cmd should work or if there is another method, in addition to my calculations in MaxL.

  Thank you

  Jimmy

  What version? If it's so 11.1.2.3 for Essbase you use a launcher separated in % EPM_ORACLE_HOME%\common\calcmgr\11.1.2.0\lib, calcmgrCmdLine.jar file if it is an earlier version and then probably will need to use MaxL

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Access for interal AND external users through a single login server?

  Hey,.

  Apart from redundancy, it is possible to have a single connection server that allows internal users AND external access virtual resources?

  For external access, I have associated my login server security server. It works perfectly if I activate the PCoIP Secure Gateway option on my server of connection and enter the public IP address of the Security server.

  But with this configuration internal users are not able to connect (listing the works of resources, but the connection fails).

  If I disable the PCoIP Secure Gateway option, internal users can access, but not external users via the Security server.

  Any contribution is appreciated.

  Thank you very much!

  No, it's the only way you can do it for internal users and external to share the same login server - activation of the MTP setting is by CS. If you want to PSG on for external users (and it is practically a necessity unless you use a third-party VPN), but offshore for internal users, they will point to the servers of different connection and so you'll need two.

• HOW TO LOAD DIMENSIONS / MEMBERS IN ESSBASE ASO REQUEST

  Hello

  We are running Oracle EPM 11.1.2.4 and created with success the planning application help EPMA workspace, it is necessary to create a reporting application. We have created a new application of ePMA workspace as essbase ASO and have dimensions of base construction and members of epma itself, the need is to have the same dimensions / members in the application (planning and ASO). My question is:

  How to bulk load dimensions / workspace members in Essbae ASO using EPMA / EAS?

  Thank you

  Concerning

  Shahrukh

  You must use the same method to load the members that you already use in EPMA, if it's a pure Essbase applications and metadata should be loaded for EPMA and not through the Regional service.

  If you already have applications of EPMA, then you would use the same method.

  See you soon

  John

• Why other users (family members) have access to my library of photos through account here on my Mac?

  Why and how other users (family members) on my iMac accounts have access to my library of photos, I don't want anyone to have access to my photos to accept through my account that I am the administrator?

  Also I don't want my children who have iPhones to access my accounts photos by user accounts here?

  Thank you community pls help.

  You share an iCloud account?

• Question about compression in essbase ASO

  I have a few questions about to define a dimension of compression in Essbase ASO apps:-

  1. is it a good idea to have the size of compressor in app Essbase ASO.

  2. I read somewhere that said it would not be good idea to have the compression period dimension where months YTD neighbourhoods and quarters of the year. So should we put compression on any other dimension dynamic calc and roll ups and have less none of level 0 members stored.

  3. I have observed that when we level 0 export from an ASO application with compressed size vs ASO application with no compressed dimension, there is a difference in size of data export file. I'm not able to understand why it is so. I understand the difference between the size of data (.dat file) between Tablet app vs app uncompressed file, but do not understand the difference when the data is exported to a .txt file.

  Thank you

  (1) compression dimension is not mandatory, but it contributes to the performance. The compression dimension is a dynamic dimension. We need the column headers in a data load file. Ideal compression is achieved if the number of leaf-level members are divisible by 16.

  (2) ASO tuning is an art as much as a science.  The best choice depends on the distribution of data in the database.  and it's different in each database.  Read all the information and then test the various options.  Try it with time as the compression and then try with the next best dynamic dimension defined as dimension of compression.  I've linked a doc tuning which is version 7, but has a very detailed discussion of the dimensions of compression.

  http://www.Oracle.com/technetwork/middleware/bi-Foundation/4822-tuning-Essbase-ASO-WP-133014.PDF

  (3) the format of the header (layout) of the export may be different when you use compression vs when you are not using compression.  It will certainly be different if you use another dimension for compression.  I expect the size of the file to edit when the compression setting is changed.

• Access to the Service of maintenance through Javascript

  Hey guys,.

  Had a problem with access to the service of maintenance through Javascript.

  Let's start first of all, here's the section of code:

  **********************

  var objXMLHttpRequest = new XMLHttpRequest();

  objXMLHttpRequest.open ("POST", "http://localhost:8020/determinations-server/interview/soap/10.4/OPA_IS", false); Point of Service endpoints, synchronous method

  " package of var = ' < soapenv:Envelope xmlns:soapenv = ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:typ =" " http://Oracle.com/determinations/Server/interview/OPA_IS/types ">\

  < soapenv:Body >.

  < typ:open - session-request / >.

  < / soapenv:Body >.

  < / soapenv:Envelope > ';

  
  

  objXMLHttpRequest.send (packet);

  
  

  **********************

  The ODS with the relevant innterview service has been deployed and I can test this very well through SoapUI. He returned with the correct answer in this casting the Session ID for the new session of the OPA.

  When I run the present thanks to my JavaScript code, I get the following error in my log:

  com.oracle.determinations.server.exceptions.InvalidActionException: no action for 'null' does exist in the service 'odsInterviewService104 '.

  Thus, it seems that it does not find "OpenSession" action that is needed.

  My question is: How to indicate the type of action in my SOAP package?

  I ran across the ODS code and I can see what is causing the error, but everything I try, I can't seem to be able to add action to resolve.

  Kind regards

  Evert

  OK, that is now resolved. Added action and settled the question of calls cross-domain that came after that.

  Everything works now.

  Evert

• 1119: access of possibly property indefinite Timer through a reference with static type class

  Hello

  I am trying to create a timer event for delaying the instantiation of my clip on the stage, but I get the error message:

  1119: access of possibly property indefinite Timer through a reference with static type class

  I am confused with how to proceed. I thought that the timer was a term already in the library for AS3, so how can he be undefined? Any help that you could provide to help me understand the problem and how to fix it, would be great.

  Thank you

  Here's a look at my code:

  import flash.display.MovieClip;

  import flash.utils.Timer;

  import flash.events.Event;

  import flash.events.TimerEvent;

  var dripTimer:Timer = new Timer (3000)

  var blood1:MovieClip = new Blood();

  dripTimer.addEventListener (TimerEvent.Timer, bloodDrip)

  dripTimer.start ();

  function bloodDrip(e:TimerEvent):void {}

  trace ("blood flows");

  blood1.x = 300;

  blood1.y = 100;

  addChild (blood1);

  }

  AS3 is case sensitive.

  Thus, the code should be:

  dripTimer.addEventListener (TimerEvent.TIMER, bloodDrip) - upper

• Calculations of the rate of aggregation in essbase ASO SEEP cubes

  The question (limitation to ASO) we tried to find a solution/workaround. ON PBCS (Cloud)
  

  Details of the application:

  
  Application: type of ASO in cloud Oracle planning 11.1.2.3 (PBCS) application

  
  Dimension : Total 8 dimensions. Account to the dynamic hierarchy. Remaining 7 dimensional hierarchies Stored value. Only 2 dimensions have about 5000 members and others are relatively small and flat hierarchies.

  Description of the question of the requirement: We have a lot of calculations in the sketch that use amount = units * rates type of logic. The obligation is such that these calculation logic should apply only to the intersections of Level0 and then data resulted must roll up (down) to the respective parents across all dimensions. But when apply us this hierarchical logic / formula calculation to ASO, the logic(i.e.,amount=units*rate) of calculation is applied at all levels (not only the leaf level) of remaining dimensions. Here, rates are also numbers derived using the formula MDX.

  Some of the options explored so far:
  Option1: This is an expected behavior in ASO as all stored hierarcies are calculated first, then the dynamic hierarchies. So we tried to change the formula for each of the calculated members to explicitly summarize data at parent levels using algorithm as shown below.

  IF (Leaf Level combination)
  amount = units * rate
  Else / * for all levels parents * /.
  Use the function sum adding up the amounts between the children of the current members of dimension1, dimension2 and so on.
  End

  Result: Recovery works through the parents for a dimension. When the summary level members are selected in 2 or more dimensions, the recovery freezes.

  Option2: Change the type of hierarchy to group all the dimensions to "Dynamic" so that they calc after account (i.e. after amount = units * rate runs at intersections Level0).

  Result: Same as option 1. Although the aggregation works through one or 2 dimensions, it freezes when the summary level members are from many dimensions.

  Option3: ASO use custom Calc.
  We created a custom calc by fixing the POV Level0 members of any size and with the amount of formul = units * rate.

  Result: Calc never ends because the rate used is a dynamic calc with formula MDX (which is needed to roll forward rates for a specified period at all the following exercises).

  If you could get any help on this, it would be a great help.

  
  

  Thank you and best regards,

  Alex keny
  

  
  

  
  

  Your best bet is to use the allocation of the ASO, what difference does make. (one ton)

  There are a few messages blog out there that can help you meet this goal. (including mine), the trick is to create a member calculated with a NONEMPTYMEMBER in the formula

  Then it will be a member with an inside MDX formula

  NONEMPTYMEMBER units, rates

  Units * rates

  Now, make a copy of data (allocation) of this member-to-Member stored.

  http://www.orahyplabs.com/2015/02/block-creation-in-ASO.html

  http://camerons-blog-for-Essbase-hackers.blogspot.com/2014/08/calculation-Manager-BSO-planning-and.html

  Concerning

  Celvin Kattookaran

  PS I found NONEMPTYTUPLE does not and still used NONEMPTYMEMBER

• "Assign access control" on essbase applications through shared services

  Hi Experts,

  I just install an Essbase 11.1.2.4 environment, where I could see that the ability to assign filters to users in environmental assessments is disabled (I guess maybe it's that this version does not support the autonomous concept).

  So I thought of attribution of the filters to users through shared services groups\Essbaseinstance1\sampleapp Application - access entitlement control, but when I click on "Assign access control", it says in the right pane that the page cannot be displayed.

  Any tips?  for your information, I use IE 11.

  Thank you

  Siva

  I gather from your question that EAS runs like it enough to be upward, as you did that you have configured the web server again after that the configuration of the Regional service otherwise it will be a communication error.

  See you soon

  John

• write again (lock and sending) cubes (v11.1.1.3) Essbase ASO?

  Hi all
  
  can you please let me know if I can make a "lock and send ' in throug cube ASO Excel Add-in? I have Essabse version 11.1.1.3. If Yes, please let know if do any particular setting.
  
  See you soon!
  REDA

  Thanks John, can I know why we don't need to lock with the ASO database.

  ^ ^ ^ There is no blocks to lock. The blocks are at the heart of data block storage Option. Technology of comprehensive database storage Option is a different beast under the covers.

  Kind regards

  Cameron Lackpour

• To access the properties of QML context through several QML files

  It seems so basic, but I don't see how well...

  I put a 'WebAPI' context property to access my class that makes HTTP requests etc. WebAPI works very well main.qml, but when I try and use it in the included LargeThumbItem.qml I get:

  "LargeThumbItem.qml:37: ReferenceError: can't find variable: WebAPI.

  How to set a context property that is available for * all * my QML files? What is the best practice for this?

  hand. QML

  {

  ...

  {ListItemComponent}

  type: 'point '.

  LargeThumbItem {

  }

  }

  ....

  }

  LargeThumbItem.qml

  {

  ....

  WebAPI.getImagePath (...)

  ...

  }

  I do the usual configuration...

  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);

  QML-> setContextProperty ("WebAPI", m_pWebAPI);

  I tried calling qml-> documentContext()-> setContextProperty(), but it did not work. Is there a global context that I can put all documents will inherit? (the API documentation seems to suggest there is).

  This problem is related to what is described here and the solution is the same. The problem is that the ListItemComponents have a different context and lifecylce due to the fact that they are cached in and out as the scrolls of the ListView (see here for details).

  I solved it by adding a dynamic property on the global object of 'Qt' for example in onCreationCompleted() or anywhere where the senses in main.qml. In my case, I chose to pass a string, because I don't know if the global property to the instance around WebAPI is a good idea.

  Qt.homeListBaseURL = WebAPI.getImagePath ("TitleImagePathPrefix", "170 x 240")

  Then in LargeThumbItem.qml for example

  {WebImageView}

  ...

  URL: Qt.homeListBaseURL + ListItemData.ContentId + '.jpg '.

  ...

  }

• Formula Member Essbase ASO (the order of resolution)

  Hello everyone,

  I was hoping to get some opinions on how they would handle a calc question I have.  I built a cube ASO (my first) for the loan on the housing data. A few fields I'm loading are a "Eff Int rate" and "Rate Eff Trans" (below) which are then used to calculate the 'interests Inc. or Exp' and 'transfer Inc. or Exp.

  Interest Inc or Exp =.

  CASE

  When IS ([account]. CurrentMember, [loan account]) THEN 0

  ON THE OTHER

  (([Avg Bal Mth] * ([taux d'Int Eff] / 100)) / [days per year]) * [days]

  END

  Transfer Inc. or Exp =.

  CASE

  When IS ([account]. CurrentMember, [loan account]) THEN 0

  ON THE OTHER

  (([Avg Bal Mth] * ([taux de Trans Eff] / 100)) / [days per year]) * [days]

  END

  

  The challenge I'll have and don't know how to manage in essbase is in what regards running sums.  I have a dimension labeled "Loan account" with about 15,000 members of individual accounts. For all the accounts of members, it works fine however when it gets to the cumulative of the 'loan account' it calculates incorrectly because of the aggregation.  To test, I tried isolating the different ways to make this work with my current solution (as seen in the above Calc) is to reset just the update rollup for now.  However, the ultimate goal would be to have this dimension of 'Loan account' always aggregate the information accurately.  Here's an example to help explain in more detail:

  

  For example, if I were to use the size of the attribute "Loan officer" and then drill at the low level of the 'loan account' it would recover 4 accounts and then those subtotal as stated above.

  I hope someone is able to give me some ideas or outline.  If this isn't the case, I can just try to accomplish in SQL before load my data.

  Thank you in advance,

  Bret

  Bret, I think what you see is a fundamental limitation of ASO.  Stored hierarchies are ALWAYS grouped together in front of a member formulas.  The only real workaround in Essbase is to use a procedural calc of the ASO - this would actually save results to the cube as input data that can then be wound the stored size.

• Essbase ASO 9.3 to 11.1.2.3

  My system has been improved to 9.3 to 11.1.2.3. Now I have a bunch of ASO databases that need to be upgraded. Is simple copy the apps from the server version 9 on the server of version 11 and then the upgrade via the EAS? I read the section upgrade of Essbase in installation guide and config tasks. However, I wonder about ASO contours and aggregations and if something needs to be done, but a simple copy on. I don't speak of Shared Services or anything else, just the apps Essbase and dbs and so simply copy the applications through is enough or not and if there are additional tasks that must be done after copy if cela the correct route.

  Installation and Configuration Guide Release 11.1.2.3

  Why not use the migration of EAS, then export/import data wizard and run aggregrations

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Guide DBA Essbase ASO

  Hi Experts,
  
  Currently, I am working on the ASO cubes. y at - there no guide DBA for only cubes ASO (including MaxL & MDX)?
  
  Thank you very much for your time.

  Essbase documentation is available at http://docs.oracle.com/cd/E17236_01/nav/portal_3.htm
  There is a guide to the administrator for OSI/ASO

  See you soon

  John
  http://John-Goodwin.blogspot.com/