Access to the camera connects but no Movie Uploader

Similar Questions

• Can I get help to install my web cam? I have the cam connected but I can't make it work.

  I would like help with my web cam, I can't make it work. Can someone please tell me what to do?

  Hello

  -What is the serial number and model of the webcam?
  -Is the webcam compatible with Windows XP?
  -What is the status of the webcam in Device Manager?
  -You get an error message?
  -Have you installed the latest drivers for webcam for your operating system?
  -Is the issue relevant to a particular application?

  Please see:
  How to manage devices in Windows XP

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• Problem with access to the camera on the net via dsl modem and linksys router

  OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.

  I think that the problem of my lie with ip addresses.

  Camera 192.168.0.115

  Router 192.168.0.1

  Modem 192.168.1.1

  The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?

  The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.

• Access to the Camera Roll AS3 Flash CS5.5

  Hello

  I'm looking and looking, but can´t can't find anything on access to the camera and camera to take a picture of my application, nobody has any code to do?

  No class please, just AS3

  Or perhaps point me to a URL?

  Thank you

  There are a few differences between the two needs. For fun, I made an entry screen to turn the example of aid for CameraRoll a timeline version! Here is the registration form:

  http://XFiles.funnygarbage.com/~colinholgate/video/camerrolltimeline.mov

  and here is the final code, which includes the error various trapping, and Android support too:

  import flash.media.CameraRoll;

  import flash.media.MediaPromise;

  import flash.media.MediaType;

  import flash.events.MediaEvent;

  import flash.events.Event;

  import flash.display.Loader;

  import flash.display.Sprite;

  import flash.events.IOErrorEvent;

  import flash.display.StageAlign;

  import flash.display.StageScaleMode;

  var mediaSource:CameraRoll = new CameraRoll();

  CameraRollTest();

  function CameraRollTest() {}

  This.stage.Align = StageAlign.TOP_LEFT;

  this.stage.scaleMode = StageScaleMode.NO_SCALE;

  If {(CameraRoll.supportsBrowseForImage)

  Newspaper (or "Browsing for image... ») ;

  mediaSource.addEventListener (MediaEvent.SELECT, imageSelected);

  mediaSource.addEventListener (Event.CANCEL, browseCanceled);

  mediaSource.browseForImage ();

  } else {}

  Log ('navigation in camera roll no is not supported.");

  }

  }

  var imageLoader:Loader;

  function imageSelected (event: MediaEvent): void {}

  Log ("picture... ») ;

  var imagePromise:MediaPromise = event.data;

  imageLoader = new Loader();

  If {(imagePromise.isAsync)

  Log (' media asynchronous promise. ");

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  imageLoader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, imageLoadFailed);

  imageLoader.loadFilePromise (imagePromise);

  } else {}

  Log (' media synchronous promise. ");

  imageLoader.loadFilePromise (imagePromise);

  this.addChild (chargeurImage);

  }

  }

  function browseCanceled (event: Event): void {}

  Log ("Image Browse cancelled.");

  }

  function imageLoaded (event: Event): void {}

  Log ('loaded asynchronously Image.");

  this.addChild (chargeurImage);

  }

  function imageLoadFailed (event: Event): void {}

  Log ("Load Image failed.");

  }

  The function log (text: String): void {}

  trace (text);

  }

• How do I get my apps to allow access to the camera and photi

  • MY iPhone 5s was software updated this morning and found out my snapchat and Kijiji, do not have access to my camera or the photos
  • I have reset my attribution and privacy, it's still doesn't work do not
  • AAND also when I go into settings > privacy > camera it says ' apps that have requested access to the camera will appear here "(mais là pas appers ci-dessous) it's the same for photos under the heading Privacy"»
  • someone also suggested in general > restrictions but do not know my password so I can't try it

  Does anyone have any other suggestions

  Hello

  Delete the apps that you have problems with then download again.

  Open the app, then it should be on the access to the camera.

  See you soon

  Brian

• iPhone 5 s - no access to the camera to lock screen

  iPhone 5, iOS 8.4.1

  Don't try to drag the icon of the lock screen camera to take a picture - the gliding camera icon, but I left with just the display of the home screen - access no camera.

  Camera works fine when the code lock is entered and access camera... just no access to the camera of the lock screen.

  Another day, another Apple irritation ;-)

  No way I'll close iOS9 don't please so no opinion suggesting.

  Thank you

  Hi mariotheplumber

  Try quitting applications: Double click on the Home button and the sliding of the application for each open application preview page

  then

  Force reboot: press and hold the sleep/wake and Home buttons and do not let go until the screen darkens and the Apple logo appears (no data is lost)

• Access to the camera - work air player not on the Playbook

  Good day everyone. I use the following code to take a snapshot of the webcam and then save it with a button. It works when I run the app in the AIR drive, but on the Playbook is not access to the camera, nothing appears.

  
  http://ns.adobe.com/mxml/2009"
          xmlns:mx="library://ns.adobe.com/flex/mx"
          xmlns:s="library://ns.adobe.com/flex/spark"
          actionBarVisible="false"  creationComplete="init()" overlayControls="false"
          tabBarVisible="false">
      
          
      
      
          
          
          
      
      
          
      
  
  

  Don't forget, you must add the permissions for it in your blackberry file - tablet.xml.

      use_camera
  

  It should invite you at the launch of the application to allow the authorization to the camera. You can also add:

      access_shared
  

  You can take a look at this article.

• Camera connected but still showing "Capture Device Offline"

  Hello

  2 weeks ago, that I used the capture feature in Adobe first CC for the last time, with no problems. Yesterday I tried to capture a video cassette again, unfortunately not the capture window to say "Capture Device Offline". I can control my camera (rewind, playback, front, etc.), but just cannot click on the record button.

  I use the latest version of Adobe first Pro CC (automatically updated 19 days ago) and I'm trying to capture with my camera Sony FX1000.

  There are 3 days, my PC downloaded automatically updates Windows 10. This update is perhaps responsible for my problems?

  Thanks in advance,

  Justin

  From the Netherlands

  

  Hi Justin,

  The first thing, in the first of the Capture settings, make sure that it is set to DV or HDV you like to match the band being captured. The transport controls are the same for either, but the video data are very different between HDV and DV. That's why you can have control, but no video, the format is incorrect.

  The next thing to check - will record your DV or HDV camera. Windows detects DV and HDV cameras as two quite different. This same thing happened to me before - can control the camera, but no image. This is because the PC "thinks" he's talking to a DV camera when it is really a HDV tape you play, or vice versa.

  Look in the menu of the camera - you should see options to set the unit of "DV, HDV or Auto. I think it's under the option 'VTR '. Unit must be in VCR mode to see this option, not fashion ENR. Choose the setting to match the tape you want to capture, DV or HDV. Do it with Firewire disconnected from the PC. This will "force" the camera to DV or HDV output via Firewire. Turning the camera off, 1394 connection, turn on the VCR mode. Windows will beep when the camera connects and don't know what will do 10, but Windows 7 always put a small message at the bottom right of the screen. DV camera would say 'Caméra DV' and 'HDV' Save as "Subunit STROKE".

  If this does not resolve the problem, you may have to resort to using the Legacy 1394 driver in Windows. http://www.studio1productions.com/articles/FireWire-1.htm

  Follow these steps should help you back in business

  Thank you

  Jeff Pulera

  Safe Harbor computers

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• My wifi will display all the available connections, but all of a sudden that stopped

  Former title: Wifi

  My wifi to view all the available connections, but all of a sudden that stopped. Wifi is turned on and there is here the wifi connections I used but now how do they return?

  Hello

  I suggest you try to update the latest drivers for the network adapter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more information, see these links:

  http://Windows.Microsoft.com/en-us/Windows7/view-and-connect-to-available-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  It will be useful.

• Access to the camera? [Android]

  Why is-Reader for Android, requesting access to the camera?

  Because the CreatePDF feature allows to convert digital pictures to PDF. See help of Acrobat Reader for Android: create a PDF file in other formats.

• Revel may automatically add photos imported to the iPad with the camera connection kit?

  Any help would be appreciated.

  Revel may be implemented in the automatic import of your camera. Go to settings and select a name from the title of the "automatic" import library Alternatively, you can select the files to import and to manally. Revel is not taken directly from the camera connection kit, however.

  Guinot

• I have reset my user password after reset and recovery mode, I clicked on save and now the user connects, but there is a problem wih Keychain it does not open safari or any internet connection

  After resetting my password user in recovery mode the connected but user Keychain has an error and or safari or chrome will connect to the inernet also trying to access my icloud it asks to check my apple ID and freezes when I try to update the keyring password, it also freezes and nth seems to be work ive tried in safe mode , but the same problem

  Hey Mariam Gamal.

  I see that you have reset your password for the user account on your Mac and are facing some issues related to your keychain. I think that this article will be able to help you remedy this situation:

  OS X: Keychain Access asks for Keychain "login" after the change of password - Apple support

  https://support.Apple.com/en-us/HT201609

  Thank you for using communities Support from Apple!

• Access to the camera of the JSR-135 after standby on 8520

  Hello world

  I have an application that uses the JSR-135 to access the camera on a 8520. The code I use is correct (quite similar to the the here: http://docs.blackberry.com/en/developers/deliverables/17968/Take_a_picture_in_a_BB_device_app_122820... ) and it works most of the time.

  But sometimes, when I try to access the camera after that the phone is in standby mode, no image is displayed on the screen and getSnapshot() returns no image data. It turns out that this also happens with the native camera application (the user interface is there, but no camera picture), except that the native camera app finally gets the image of the camera (it can take from 1 second to 5 or more). Once the native camera app becomes the camera image, this also works in my MIDlet.

  I can't use the camera application native from my app needs a user interface customized for the screen where the snapshot is taken. I tried to call and close the camera application before showing my screen in the MIDlet, but it is not very pretty and I have to wait an arbitrary amount of time (which may or may not be sufficient to return to the screen), or try taking snapshots with the application native camera up to what he was able to know that the camera is available that is not very satisfactory.

  Prevent sleep mode is not an option since my request is supposed to be running for a whole day.

  Is this a known bug? Is this a hardware bug of my device? Y at - there a better solution?

  The device information:
  8520 with OS v5.0.0.592 (Platform 5.2.0.64)
  no update available

  Looks like she could be related to the hardware problem described here I'll have to test it a little more, but by pushing the lens seems to have solved the problem.