Disable wireless on a WRT54GC router

Similar Questions

• Cannot connect my HP Photosmart c309g-m printer to my Linksys WRT54GC router. "No filtering = FAIL.

  I have problems connecting my HP Photosmart c309g-m to my Linksys WRT54GC router.  The diagnostics report says "no filtering = FAIL" in all my attempts.

  First I had implemented security wireless to the router with a personal WPA2 password.

  Because this does not work, I spent my WPA security, given that the diagnostic report suggests that this is what he actually uses for encryption. This no longer works.

  I double and triple checked the MAC address of the printer in my MAC filtering wireless settings. He was right. However, he didn't always connect.

  Reluctantly, I turned MAC filtering. However, the printer still wouldn't connect.

  Now, I'm out of options. All possible ideas for this problem?

  Here are a few ideas:

  1. check that the SSID is being broadcast.

  2. make sure that DHCP is active.

  3. don't use MAC filtering (it is not a security measure, in any case).

  4 change the channel from router to 11.

• My photosmart lost SSID and disabled wireless without any known reason.

  My photosmart lost SSID and disabled wireless without any known reason. Diagnotics only clue is that the addresses IP, SSID, etc. are empty. However, it can detect the 802.11 network (ethernet address but no IP address) where it belongs.

  I am advised to do an install "wireless", but no indication where to start? Need my Win7 computer USB connection?

  Thanks - I've finally found the Belkin router WPS button so after activation of wirwlwess with WPS on my printer PS B109n the problem has been resolved automatically.

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• connect to hp 2540 wireless to linksys WAG200G router

  I try to connect the HP DESKJET 2545 to the Linksys WAG200G router via the USB cable and the HP software. The software detects the router and the parameters (name SSID and password) but finally when it tries to connect, it says that the name of the network (SSID) is not found.

  I have enterd the router manually settings and I still get this message.

  I have disabled the firewall on the router and still nothing

  Help, please

  Thank you. Isolved the problem. Just use another browser. I used google Chrome instead of internet explore and everything went well

• Enabling/disabling wireless adapter without administrator rights (Win 7 64 - bit)

  Is there a way to toggle wireless adapter without it as an administrator? Our political laptops where user access is limited and admin password is required to install all the software are submitted. Since the enabling/disabling wireless adapter requires Admin rights, users by default are not able to turn on/off wireless. However, our IT Department has confirmed that their policy has nothing to do with the wireless adapter and it's a setting in Win 7. Is there a solution to this? Thank you.

  There is no control of Windows 7 that will allow a user account Standard toggle the WiFi card.

  A Standard user account is limited to the secondary action of switching on & off WiFi using the F7 / Fn + F5 key or the key it is for the model [a switch is often provided in the dialog box Windows-X as well, "Windows Mobility Center" key].

• BlackBerry Smartphones how do you 'Disable' wireless synchronization...

  How can you 'Disable' wireless synchronization...

  You can either go to each individual PIMS and calendar to turn it off.  for example go to calendar > Options > Desktop > wireless sync.

  Or you can go to Options > advanced options > Enterprise Options.  Once you're there, press and hold "Alt" key + cnfg, then you should be able to see the wireless sync options in there, just change no. "

• Satellite C660 won't take a wireless connection to my router

  My new C660 very quickly finds my router and shows a connection, but then does not connect to the internet - suggestions please because I don't know where to look!
  It works fine with a cable.

  Our internet connection is sometimes a bit low, but I have a Satellite P200 (which I am currently using) who manages to connect every day every day so I expect the same of the C660. My daughter needs to use it at the boarding school therefore essential that one can easily get the wireless operation.

  Thank you very much

  > My new C660 very quickly finds my router and shows a connection, but then does not connect to internet

  disable firewall settings to see if it blocks the connection.

• Disabling wireless internet for HP pavilion 23

  I have a new HP Pavilion 23 office, running windows 8.1.  I want to do a recovery of the DVD set and the instructions tell me to 'DISABLE CONNECT WIRELESS to the INTERNET'.  How can I do this without turning off the router used by the other PCs in my home wireless?

  Watch the systray next to the clock on the desktop to the wireless icon. Left click on it and then click the icon that shows your internet connection. Select disconnect. That's all. Wireless is disconnected.

  

• hp7520 disable wireless or hide the SSID

  Hello.

  I have a HP Photosmart 7520.

  It works fine except my client does not want the ssid broadcast in the doctor's office.

  It is already password protected, but he dislikes the ssid 'disorder' in the air.

  I would like to disable Wi - Fi to the printer or at least hide the ssid broadcast.

  Is this possible?

  Thank you.

  Go to the printer and turn off wireless Direct.  Quite.  This assuming the printer is connected to the router.

• EA6500 disable wireless streaming

  I think I've been carefully through each single screen and may not know how to disable the broadcast wireless on my new EA6500. I usually see cela in 'Wireless' settings but must be missing something.

  Please indicate where I can get this temperature!

  We actually noticed this as well. There is no option to disable broadcasting SSID on the EA6500. I found this article from cisco knowledge base that explains why he is no longer available.

  Title: where can I disable Broadcasting SSID in Linksys Smart Wi - Fi account? ID article: 25811

  "In the broadcast SSID router configuration is no longer an option in Linksys Smart Wi - Fi routers.

• E2500 - Possible to disable wireless?

  My E2500 is running firmware 1.0.01 build 3.

  Is there a way to disable the wireless with this router? I checked in the advanced through Cisco Connect, and if it's there, I missed.

  Thanks in advance for any ideas on that.

  Go to the web interface and set the network on page mode wireless for guests with disabilities.

• Cannot access wireless with linksys WRT54GS router

  Hello

  I just installed a Linksys WRT54GS router on my connection, the problem I have is to be able to access with my wireless on my laptop.

  I kept getting a message saying 'connection unindentified' 'access '. I did most of what is already on your forum that such a power out of my rooter, my modem and such and still nothing. I am able to access wireless with my girlfriend Mac laptop, my playstation 3 and my desktop computer which uses Windows X. I initially thought that it my be a problem with my security but even when the connection is unprotected I still have this error. I am trying to disable the IpV6but that didn't ' dot something or the other.

  My laptop is a Toshiba Qosmio X 300 PQX32C-033019 with Vista and my router is a Linksys WRT54GS to. 6

  Here is my connection connect you, sorry if this is in French:

  Try this-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  On your Vista laptop, first turn off the wireless network connection and restart the laptop, and then enable the wireless connection...

  Then click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows , and then restart the laptop, now see if you can connect to the Internet wireless...

• WRT54G2 - temporarily disable wireless access?

  Hi, is it possible to disable (temporarily) the router wireless?

  My office (by cable) is connected to the Internet, most of the time, but for reasons of security, I would turn off the Wi - Fi to the router (and therefore to our network home) when we do not use our laptop.

  Thank you

  Luis

  Well Yes.  Access the router admin pages.  Select the wireless tab and select Disable.  Save the settings.

• Wireless and VPN RV042 router WRT54G

  Respected member, please help if you can! I have an ADSL with dynamic connected with the wrt54g router, I recently bought RV042 and want to connect the wire coming from wireless with ports. so, basically, I want to use RV042VPN for help after the router, is there a way I can use vpn behind with port using RV042 router wireless

  I can't be able to connect to the vpn as he seeks is not an ip or WAN/LAN.

  It may be possible if you're lucky. But I highly recommend not to connect the RV042 after the WRT. A VPN server must always have a public IP address. Running a VPN server behind a router NAT (such as WRT) makes it extremely difficult and often it won't work at all. Connect the RV042 directly to your modem, configure it to your internet connection. In this way the RV042 has the public IP and VPN should become much easier. Then implement the WRT as simple access point in your network by changing the address LAN IP of 192.168.1.1 to 192.168.1.2, disable the DHCP server, and connect a LAN port of the WRT on a LAN on the RV042 port.