Access to the demo in the browser, to solve a problem of green spots

Similar Questions

• When I click on the right botton I see a small copy of the browser page. This problem on the new version of mozilla. This problem is not presented on 15 version of mozilla.

  When I click on the right botton I see a small copy of the browser page. This problem on the new version of mozilla. This problem is not presented on 15 version of mozilla.

  I think that you run two versions;

  The details of your system to watch;

  Shockwave Flash 14.0 r0 * Shockwave Flash 13.0 r0

• Should I spend the $280.00 for the cannon to solve my problem of autofocus 70 d?

  Should I spend the $280.00 for the cannon to solve my problem of autofocus 70 d? Or just go back to my rebels much trust?

  MelekalsCanon wrote:

  Very much appreciate your taking the time to send a response. As a new user, I was not sure if anyone worth. Let me add a bit more to my first post. I go into this niche between amateur and a person with clients. For more than 10 years, I have covered the events for a non-profit organization, capturing the look and feel of 20 + events per year and received permission to buy some cameras this year. My decision from the beginning was to use the Canon Rebel. The images are on site and once I had a problem with one of them (after the filming of the external events in time 105 degree for 3 days).

  So when I retired a year ago, it was for me a selection fairly simple to get a gun for me - especially since at this time there the 70 d was on the cover of magazines and has been very very touted. I also did a lot of publication computer assisted and helped me to realize that I want the best sensor, resolution and sharpness, lens that I could afford - the 70 d of photo editing. My post was actually a result of reading many replies online, including your very informative responses on 70 d focus problems. My biggest concern is I'll spend hundreds of dollars and maybe, just maybe get a camera that captures images better targeted, but still not as strong as the bottom end rebel I used. I had hoped to buy my first goal of 'L' and really get excited - not try to repair the unit more expensive that I bought that day.

  Thank you once again and before he gets noted by someone... Yes, I should have pushed this issue earlier and then at least the guarantee would have covered the cost. A lesson in expensivve. But I must add that at least an authorized Canon dealer repair told me they had several people the impression that I did - he was the photographer / me as a new user having the problem and not the camera. Now, I know it's my camera.

  Let me clarify that I do not own a 70 d, so what I say about it is to look at what others have said, especially in this forum. But it is disconcerting to see so much complaint about a camera that is supposed to have an innovative system of development. One is strongly tempted to suspect they went overboard in trying to put the camera to the service still photographers and videographers.

  That said, I'm not a big fan of the rebel line, because they do not have af microadjustment, and I at least have a Canon lens excellent also which would be useless without it. (The 70 d there AFMA, a point in his favor.)

  What about spending the $280 for the repair, I understand why it is difficult to call. If I were in your shoes and were convinced that Canon includes the question and he'll fix it properly and permanently, I guess I'd go for it. If you do not do, they fell that you need something a notch above the rebels, is perhaps a good time to buy a 7 d remains or rehabilitated. Even though I now have a 3 out of 5, I always use my 7 d a good amount and have been very happy with them. And the 2 7 got such a favorable reception it was practically forced to put at the disposal of the most 7 d at a decent price.

• Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  How do I rebuild the icon Cache in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Whenever I try to download something, he said that he could not access APPDATA Error 1606. How can I solve this problem without any of my stuff getting deleted?

  Whenever I try to download something, he said that he could not access APPDATA Error 1606. How can I solve this problem without any of my stuff getting deleted?

  Hello
  1. what Internet browser do you use?
  2 are you having the same problem with other browsers also?
   
   
  Method 1: I suggest you try SFC running [System File Checker] scan on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2: If the problem persists, you can try the steps mentioned below and check if it helps.
   
  (a) click Start.
  (b) type regedit in the Start Search and press enter.
  (c) access the site mentioned below.
  "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
  (d) then change the appdata read "% USERPROFILE%\AppData\Roaming" thing
   
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
  
  
  Hope this information is useful.

• Windows XP security does not allow me access to the browser or the internet

  I'm having a problem with XP Security that keeps popping up almost continuously and prevents me from doing anything , without ordering the software.   It also shows that I have 26 virus, but an another separate scanning with a newly installed anti-virus [Ioio] program stated that 5 and were all deleted/purged.

  I have been using FireFox as my browser and still cannot access Yahoo homepage - impossible to go to the post office or anything else.  Pop up warnings keep coming and display 'Windows XP Security' is still waiting for me to buy their program - and I can not change anything on this menu at all since it keeps redirecting me to the purchase.  I can't get FireFox or even Internet Explorer since it shows a terrible message and does not allow me to circumvent it.

  What can I do to get rid of this problem?  I had to use using another computer to communicate with you and don't know what to do to solve this problem.  This same message/problem seems to resurface every year and made it for 2-3 years.  I resorted to an online, remote help to alleviate the problem in the past, and it still costs a lot of money to solve.  How can I FIX?

  See if that helps.

  http://www.bleepingcomputer.com/virus-removal/remove-total-security

• Access to the eccentric camera and GPS problem

  I love this phone and use it for a few weeks now. I know that the update just worked for T-mobile, and the biggest problem he treats is the camera. My question is if anyone knows if this update fixes other issues?

  One of them is how he takes the X bike to pin point its location. I know that most of the Android phones are simply not very fast when it comes to this, but this phone takes more time than many other phones I've used (most recently a HTC One).

  Another problem is, like many of us, I take lots of photos, and access to the camera can be tricky. I like to review my photos before I quit the application. Later if I want to go in the camera app, it brings me to the last image I tested, instead of the camera. Very well, but when I swipe to the left to reach the camera, he leaves the app. Also the camera icon on the bar above the image is missing, so I can't easily access the camera.

  Is the application gallary your default program for image manipulation? This happened to me when I made the default handler quickpic.

• Delete the browsing history in IE8 problem - Windows XP.

  I tried to remove IE8 browsing history using tools/Internet Options.  I have Windows XP.  He ran for more than 2 hours before I canceled it.  I have not had this problem in the past.  Why does it takes so long and is there a problem with my IE?

  Try to close Internet Explorer, then:

  Go to start, control panel

  Double-click Internet Options.

  Delete the browsing history from here

  If it runs for a long period of time, try to restart your computer and do the steps above before you open Internet Explorer.

  Let me know if it works. I have more options, just try it first. Do not download not the cleaners registry or things. Usually, they cause more problems then they solve.

• After plugging in a closed to a new laptop HDD, a window pops up saying: "F: / is not available." Access denied. " Is there a way to solve this problem, or am I out of luck?

  On my last laptop, I got a virus that has corrupted my OS files (Windows XP). I was using a version of Linux to run it, and then I crashed my AC adaptor port, making it essentially useless computer. I now have a 'new' laptop (for about a year now) that works under Windows 7.

  I took possession of files but also address options for sharing and security in my username and I am the administrator.

  The only option I've heard that I have not tried is a command prompt. I'm not familiar with this system, so if there is anything else I can do, I would rather try everything first. If not, I'll settle for anything at this point.

  Thanks a lot for all the suggestions.

  Hello

  You can follow the steps mentioned below in order to resolve the error.

  Method 1:

  Note: Check with the different ports on the computer to reproduce the problem.

  If you use a USB hub, try connecting the USB key directly and check.

  Step 1:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  (Applies to Windows 7)

  Refer,

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

   

  Step 2: Check if you have any restrictions for the use of a USB key in the registry and fix them.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. Click Start Menu > go to run command and type regedit to open the Registry Editor window open.

  b. expand the folder HKEY_LOCAL_MACHINE, then SYSTEM > CURRENT CONTROL SET > SERVICES > USBstor, located in the left pane.

  c. find the 'Start' in the right pane with the blue icon.

  d. Double click on 'start '. A box labeled "Edit DWORD value" will open.

  e. type '4' in the field 'value data '.

  f. click OK and then close the registry editor.

  g. re, insert the USB key and check.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Access to the mobile phone HTC WIFI problem

  Hello

  We have Cisco LAP wireless environment, The WLC is WISN (software version is 7.0.98.0), access point is Cisco 1142. We have a user with HTC mobile phone (OS is Android 2.2) can not access the WLAN (WEP key + WEB-based authentication), it must take a lot of time to get the IP address or IP address cannot be obtained. Is there someone have similar problem?

  Best regards

  Jackson Ku

  Glad to know that it works...

  At first I don't think that the problem was the device but conffigured load balancing...

  Well, since you wanted to have certain amount of units in the network, by AP.  If this limit is reached by the AP, brand-new answer association will respond with code 17 the customer tell "hey dude, im complete, look for a different access point", is the customer later new which either decides if he get another one or continues to try to associate with the access point in the box...

  This feature can be used in order to customers balance the load through towers on a single controller. Customers choose the AP based on the client to report Signal to noise (SNR) in this AP and the window of the load balancing.

  Dynamic balancing works in the link phase. If active and the conditions to balance the load, when a wireless client attempts to join a TOUR, association executives of response are sent to the customer with a package of 802.11 response that includes the code of State 17. This code indicates that the PA is too busy to accept any associations.

  It is the responsibility of the customer to honour, process or ignore this frame of response association with reason code 17. Some clients to ignore it, even if it is part of the 802.11 specification. The standard requires that the client driver must seek another AP to connect to since he receives a 'busy' of the first AP message he's trying. Many customers do not do this and send it to the request of the association. The customer in question is allowed on the network wireless during subsequent attempts to associate.

  The controller sends a response with reason code 17 association frame to the client. If the customer decides to ignore the reason code 17, the customer can try the same AP again and this time the PA allows the customer to complete the association.

  If the customer meets the association 17 response status code, the client then tries to associate with a different access point. For example, if balancing is activated and the window of load balancing is configured as five customers, when a sixth client tries to associate to the AP, the client receives a frame of response of the 802.11 Association with 17, status code that indicates that the AP is busy.

  Here is the link on how it works...

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00809c2fc3.shtml

• What should I do after getting error messages trying to change the registry to solve a problem of inability to create folders

  I copied a file titled "windows registry editor version 5.00" to solve the problem of records but when running, got an error message that says: "cannot import c:\...\NewFolder.reg: not all data was successfully written to the registry." some keys are open by the system or other processes.

  I've eliminated the "windows registry editor version 5.00" header then tried to run again.

  This time, I got an error saying "cannot import c:\...\NewFolder.reg: the specified file is not a registry script." You can only import files from binary registry within the registry editor. »

  What should I do now?

  I can't yet create a folder. This problem started after I had the help of Norton to eliminate a problem of phishing.

  Did you use one of them? The first is a zip file that does all the work for you.
   
   
   
  You have installed chrome? It's looking like a recent update of chromium may be the cause. Here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   

• I tried running Photoshop on Windows 10 CC, but it gives me "error 213:11". What is the procedure to solve this problem?

  I have Photoshop CC (64-bit) on Windows 10. Until yesterday, Photoshop worked normally, but now if I run the Photoshop application, the PC gives me an error window 213:11 and Photoshop will not start. What should I do to solve the problem?

  Not exactly the same code error, but may have an idea

  Error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions

• Muse phone site does not display correctly when read on the mobile device, all the tips to solve this problem?

  You can visit the Web at www.conceptfizz.co.uk, office computer works great, but version phone does not charge full-screen, only on the left side. Thank you

  It is no doubt loading the mobile version. Select all items on the page to verify that you haven't left anything on the right side of the page, or the areas encompassing the widgets have not expanded too far - this often happens when you move components.

  David

• I get a windows security alert. "application cannot be run. The file wuauclt.exe is infected. There is a virus program that opens asking me the task to solve my problem. What can I do to fix this?

  I don't know what to do.

  Please help me with this problem.

• Microsoft call you and tell you they want access to your computer so that they can solve a problem?

  I got a phone call today saying they were Microsoft and for me to turn on my computer because what they saw in the error message in the sent reports that I have problems with my computer. I don't, but they call me back tomorrow to do. I have caller ID on my phone and it came without a name or phone number. Microsoft did that? His name was Franklin, but it seemed Asian tells me the man. An hour earlier, I received a call from a place called Tecnocure of this John guy on my computer and he wanted to me too on my computer? It is for real or is it a scam? Please advise, thank you very much!... Michele

  http://answers.Microsoft.com/en-us/feedback/forum/feedback_other-na/annoying-phone-calls-from-Microsoft/ff577b79-7e5f-4975-8a01-05e261beb003

  read the thread above, phone calls are a scam.