access to the file on the server goes down

Similar Questions

• Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

  I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.

  Is it right, that we use View 3.1.

  Thank you

  It's strange that I can restart my server connection without worrying about all the users.   How brokers connection you have and do you have activated all at direct connection?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• AppPortal error: remote access to the server is not enabled

  I'm lost on this one.

  Using the full client of AppPortal on a Win7 64 bit machine (version 8.0 of the customer)

  Double-click the icon, download authenticated - published applications show, then double click a published application, the end user receives:

  Remote access to the server is not enabled.

  This happens only on a single computer

  From this profile of users on the given computer I can MSTSC on the same server without problem

  The error also follows the profiles on the given computer.

  I have closed the Antivirus and Windows Firewall and still can not get this to work.

  Even uninstalled and reinstalled the client.

  From my computer, I can easily log in as this user.

  Customers get automatically configured through an XML file.

  After installation, I tested this laptop and he always gave the same error.

  I ended up him to give me the phone for a few hours.

  Uninstalled the version that was there (build 8.0.0.forget) and scoured the Windows Explorer for all left overs (a little here and there in user profiles and delete).

  Then scoured the registry for expressions; vWorkspace, Quest Software and Provision Networks and remove all instances

  Reinstalled all THE SUCCESS with the new connector to our servers (8.0.306.1427)

  Thanks for the help Dave

• If the server is down

  Hello.
  I m developing a game.

  There many variables URLLoaders thereon.

  I m adding an IOErrorEvent listener for each of them.

  I´d I just wanted to know:

  For example, if I-m the game, then

  I ask (I call a Flash php file that will send or get information from a database).

  What happens if the server is down right now?

  What is going on?

  Flash triggers an IOErrorEvent?

  Thank you

  @Lee: ' why not try to use a url that does not exist and see what happens...» »

  There are major differences between the nonexistent files on the server/domain valid and not valid domains - non-existent servers.

  @marcelozepgames:

  In both cases, IO_ERROR will return error #2032 error of flow. However, if monitor you HTTP_STATUS - you will notice the difference in status. Most likely, if the server is down (or not valid server) - status will be 0. In the case of the invalid url on the valid server - it will be 404.

  In any case-, it is not difficult to check it out on your own server local tilt head on a stop.

• While using my phone and the battery goes down sometimes while it is on the charger

  While using my phone and the battery goes down sometimes while it is on the charger

  What charger do you use? Which shouldn't happen with the Apple adapter, but it might with adapters that cannot provide informed that the phone needs.

• What happens if the network goes down when the broker DataGurad (with fast failover) is configured?

  Hello Experts,

  We have configured Dataguard in our environment, now anxious as the broker. But we have some queries.

  1. what happens if primary fails (failover or passage)?

  2-if failover occurs, go back manually when the primary is available?

  3-if Eve falls down, how would react broker?

  4 - If the network goes down (for any reason) for some time, observer cant find primary and standby, how would he react then?

  Please help me with your advice.

  Thank you and best regards,

  Vignacourt zerwali.

  Hi David,

  Let me put in a way if I understand your question. So, you have broker + observer configured in your environment. FSFO occurred which means your watch becomes primary and is running. Then after some main real-time is alive and what will be the observer will do here. ? right. ?,...

  If my interpretation is correct, here is the answer,

  (i) when the old primary remains alive, just bring up the State. The observer resets automatically (if its market) the database, bounce the old primary and synchronize with the new primary (i.e. your old database pending). But remember that your old primary will undergo sleep role yet...

  After the process described above,

  (II) If you want that your old primary again, we have to do a manual failover to get your old configuration.

  Hope he would have deleted you. !!

  Kind regards

  Pradeep. V

• Connected to CC to download Muse trial and get Adobe Muse is now downloading... Continue to learn page. Cloud creative app shows ripple sphincter and the app or the Installer are nowhere to be seen on my computer. The server is down? That is what it is?

  Connected to CC to download Muse trial and get Adobe Muse is now downloading... Continue to learn page. Cloud creative app shows ripple sphincter and the app or the Installer are nowhere to be seen on my computer. The server is down? That is what it is?

  I had put to the index a number of Adobe servers previously in Little Snitch because of their annoying habit of continually calling home and interrupt my goal. Upgrade to Little Snitch and removed a black list and restarted the Mac and everything of fine.

• How do you get alerts if your mail server goes down?

  I have send and text alerts sent via my server Exchange but is it built to send alerts in case our email server goes down? Foglight has a mechanism to send alerts that do not require a mail server?

  Hello

  Yes... Make sure that the failover on monitoring of Server SMTP is selected in the Config > Admin > SMTP settings area. This will continue to route alerts through our mail server, in which case your crashes.

  Thank you

• Configure the settings of the server going out with Wide Open West

  Wide Open West is changing the out going server settings. I talked to support WOW, and according to them I have all the correct settings.
  Server name: smtpauth.mail.wowway.com
  Port: 587
  Connection security: STARTTLS
  Authentication method: Normal password
  Username: "my wow username.

  When you try to send a message, I get the following error message:
  The message send failed.
  The message could not be sent to the help of Outgoing server (SMTP) smtpauth.mail.wowway.com for an unknown reason. Check that your outgoing (SMTP) server settings are correct and try again.

  Then a window opens with the title Security Exception Add asking me to add a certificate for the site. When I click on the button get certificate button to confirm a Security Exception is grey and my only option is to cancel.

  Someone has encountered this problem and have a solution? WoW is changing their Dec 15 servers and my old settings (which works) will be no longer valid. WoW customer was unnecessary and was told to contact Thunderbird.

  After a few other game I discovered that rather than clicking the button get certificate I could ignore that and simply click on the button confirm Security Exception and everything worked.

• Routing and remote access to the Server 2003

  I configured the remote access and routing service in my Server 2003 duly NAT enabled. All my clients are not in the field. All use internet and intranet connection using my proxy authentication provided by the administrator of the proxy server. I would like to restrict the clients except intranet connection. How to limit the customer?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Access to the server

  Hello

  Im trying to make a public Server Terminal Server from outside. I have a SonicWall firewall, but I can't connect to the DMZ server.

  I used the Connection Wizard to give public access to the terminal server, I changed the Port TS on the server and when I try to connect to public_ip:port the web displays an error like "Connection refused".

  Could you help me please? There's a tutorial about it?

  Thanks in advance.

  You need a loop return policy if you are trying to access the server by its public of the n/w internal IP address (IE behind the sonicwall).

  Below the video will help you with the political feedback loop.

  cs_setInnerHtml ('video_5745f812 - 4 c 21-4eea-8da2-bfc9afcb0fc9', ");

• Win 7 Pro - make a name of user and password request when accessing to the server computer in the workgroup. Credentials, then considered non valid.

  Recently bought a Dell Dimension 3847 with Windows 7 Pro to replace a workstation that is connected to a network that uses Windows Server 2003. I already set up two other PC's (not same model) with Win 7 Pro, for existing users and had no problems whatsoever. The user of this workstation is an existing one (implemented as an administrator).  I've set up his account and she joined the working group. The other computers in the workgroup are listed under network location. However, when I tried to access the server computer in the Working Group, I got a pop-up window asking for a username and password. This would not have taken place. However, I entered the username and password for that particular user and received a message that the user name and password were not valid. I set up my user account (it has administrative privileges too), on this computer, joined the Working Group, Windows recognizes the other computers in the workgroup, but when I tried to access the server computer I got the same pop-up and had the same problem with my credentials not being recognized. While remaining under my user name, I tried and then access the server computer again but when I arrived at the prompt for the user name and password, I used the 'Administrator' user name with the appropriate password (the credentials used to connect to the server computer) and it worked. I registered to the account of the other user and used the same method to access the server and it worked as well. Any ideas why the user credentials, other than the administrator account, are not recognized?

  Hello

  Sorry for the late reply.

  This problem is better suited in the TechNet forum where we have experts working on the same topic.

  Please post your request in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  I hope this information helps, get back to us if you need help with Windows.

  Thank you.

• Access to the server vCenter Server security policy

  Scenario:

  Users must have different levels of access to virtual machines.  Some need only to be able to turn it on, restart and shut down the virtual machines.  Some need taking pictures, power on, power off, then restart.

  Others must be able to do anything.

  There is an existing Active Directory server.

  We do not want to overwhelm vCenter server with too many concurrent connections.  More than 3000 users must turn on and off the virtual machines and take snapshots.

  Less than 50 administrators full privileges in vCenter Server.

  We must use AD when it is possible to set up groups of users who have different privileges.

  What are the strategies to achieve this?  We should create a 'leap VMs' set in an area of special security for those who need access to vCenter Server to power on virtual machines and take pictures?

  What security products facilitate such scenarios?

  Subsequently vcloud or Automation Center vCenter vCenter Operations Manager will be used.  The solution must be able to integrate all the products of VMware management as opposed to replacing them.

  Thanks for your comments.

  Hello

  Actually, you are not generically allow access to a virtual machine, a console instead, if you allow access to a virtual machine that you want to monitor access very closely because it (other than RDP) console through the virtualization management services (ala vCenter). I would use tools such as HyTrust, Xceedium, Thycotic, etc. for monitor/audit access. Personally, I'm just saying my system administrators use RDP as it does not pass through the layers of virtualization management. If they need access CD for example, I provide other ways to access the ISOs of a common share (VCD, loop media) instead of asking someone to use vCenter.

  A poor man to get the same functionality is to create a proxy service that connects to all requests for access to the consoles and serves as additional security gateway in the virtualization management devices (ala vCenter). This way a request to go directly to the virtual console is properly logged and you can use this same proxy to make queries to Mount/unmount images, etc. By using a proxy, hytrust, Xceedium or Thycotic you can let him manage the 3000 user requests, limit the number of connections allowed at any time (which is a must), set timeouts, but especially you can delegate all through a service inside of vCenter account so that you can get the best control of your environment. Logging, these tools provide is enough to meet verification requirements.

  However, the best suggestion is to enable all simply do not. I have been broadcast to a virtual environment for years and I would order access to the console of a virtual computer was simply not necessary. You want a complete separation between the management of virtualization and the rest of the world.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, 2010, 2011,2012,2013,2014

  Author of the books ' VMWare ESX and ESXi in the business: Planning Server Virtualization Deployment, Copyright 2011 Pearson Education. ' Of VMware VSphere and Virtual Infrastructure Security: securing the virtual environment ', Copyright 2009 Pearson Education.

  Virtualization and Cloud Security Analyst: The Practice of virtualization, LLC - vSphere Upgrade Saga - virtualization security Table round Podcast

• Access to the server of BC e-mail via a script?

  We would like to have a course of training automatically email the instructor when a student successfully completes the course/quiz. I can integrate the javascript code in the course to do, but it needs to interact with a script on the Server Web that would actually send the email. I can code this script, but the need for information on the Colombia-British mail server and what script language you use.  Can one tell me if the mail BC server can be accessed for this?  Thank you!

  I think that I have answered your question in your other post on the forum: http://forums.adobe.com/message/5368954#5368954

• Access to multimedia files from another server problem

  Currently I am working in a project with streaming video on-demand and using FMS 4.5 .

  
  

  " Say the FMS is installed on a machine say ' 121.123.35.34 ' and there is another server"100.54.88.222". where all media files belong Now we need point to this third-party server to play videos of FMS. I did the changes below:

  In the fms.ini file: set VOD_DIR2 = \\100.54.88.222\myvideos

  In the application.xml: added stream: streams >/HR; ${VOD_DIR2} < / flow >

  My request for access to the path of the flv as: source = "rtmp: / / 121.123.35.34:1935/vod/hr/test. Not able to access the video.

  
  

  Note: If I say "C:hrvideos" in VOD_DIR2, then I'm able to access videos using the same URL.

  
  

  I also tried mapping the path shared the machine to the FMS and then saw the drive mapped path in the VOD_DIR2, but it does not work.

  Please let me know:
  

  1. If we set up any other parameter videos from another server.
  2. VOD_COMMON_DIR: I modified this similar to VOD_DIR in the directory "C:hrvideos", I am able to stream videos with http, rtmp, but not the jet of abl eto.

  Please let me know we can disseminate via http too as we need to run the f4m manifest file.

  http://121.123.35.34:8134/vod/hr/sample.mp4.

  http://121.123.35.34:8134/vod/hr/sample. F4M
  

  
  

  Thank you

  Anjali

  Hello

  For RTMP: Try mapping to another server.

  For HTTP: Yesy you can change the DocumentRoot directive, but then it will search for content in this folder for all types of applications and not just HDS VOD.

  To configure only HDS - VOD, positioned on the HttpStreamingContentPath:

  Change this HttpStreamingContentPath '... / webroot/vod " to HttpStreamingContentPath" C:/hrvideos "

  Note that the location is now absolute and oblique. Likewise, you can put in a network address.

  Thank you