Similar Questions

• Connected to CC to download Muse trial and get Adobe Muse is now downloading... Continue to learn page. Cloud creative app shows ripple sphincter and the app or the Installer are nowhere to be seen on my computer. The server is down? That is what it is?

  Connected to CC to download Muse trial and get Adobe Muse is now downloading... Continue to learn page. Cloud creative app shows ripple sphincter and the app or the Installer are nowhere to be seen on my computer. The server is down? That is what it is?

  I had put to the index a number of Adobe servers previously in Little Snitch because of their annoying habit of continually calling home and interrupt my goal. Upgrade to Little Snitch and removed a black list and restarted the Mac and everything of fine.

• Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

  I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.

  Is it right, that we use View 3.1.

  Thank you

  It's strange that I can restart my server connection without worrying about all the users.   How brokers connection you have and do you have activated all at direct connection?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• No emails arrived today, the server is down?

  I'm not a COMPUTER guru so when to stop my emails, I don't know how to check that everything is ok.
  I get regular e-mails through accounts not on Thunderbird but our business email come via Thunderbird ([email protected]; [email protected]; [email protected]).

  Grateful for the help.

  What SERVER would that be?
  Thunderbird is the client software of e-mail running on YOUR computer.
  You can contact your provider of mail on their servers.

• the server is down?

  There is down or just incredibly slow.

  It was lightning fast during the holidays.

  anyone else having problems this morning?

  Dave

  http://status.adobedps.com/ to see updates on service outages or maintenance windows. In short, no.... He is not down.

• Link to aurora seems not work - is the wrong url or the server is down? (or is it just me?)

  Update of the Aurora is a failure and I can't download the last Aurora on the firefox site. The url provided points http://www.mozilla.org/en-US/firefox/channel/#aurora to https://ftp.mozilla.org/pub/mozilla.org/firefox/nightly/latest-mozilla-aurora/firefox-26.0a2.en-US.mac.dmg and it seems to hang (it seems strange that it is https and ftp...)

  Have you tried to close and restart Aurora?

  If something goes wrong with the updater, so it can get stuck in the connection, especially if a part has been already downloaded (updates\0 folder contains a update.mar file) and in such a case, you may need to delete the folder updates\0 to restart the download of the update of Firefox.

• Failure of Hotmail - compromised account and cannot reset the password. The server is down, and the moderators are not admit it?

  DEAR MODERATOR, PLEASE READ THIS EMAIL CAREFULLY, IN ORDER TO AVOID THAT SUGGESTS A SOLUTION, I HAVE TRIED SEVERAL TIMES.

  I tried for five days to access my hotmail without success. Wednesday, December 14 I accessed my account the morning normally. However, in the afternoon, I found that my account has been blocked, apparently due to receive a large amount of spam. I followed the link in the window that asked me to provide a mobile number, so a code can be sent to me, and I would then be able to unlock the account. I provide my number, but received no codes for this date.

  I then entered the hotmail Help Center and asked a question asking for my account to be unblocked. I got a response the next day, saying the account was then unblocked and I could use it normally. However, I was unpleasantly surprised to discover that I couldn't open my hotmail, my password was not recognized. I tried to reset my password, but if you follow a link sent to an alternative email, every time since Thursday, the result was a page saying:

  There is a temporary problem

  There is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.

  I tried to reset my password more than 10 times in the last four days and nothing. I tried different browsers, tried to optimize the browsers, tried five different computers - AND NOTHING.

  I reported this problem on several occasions in the Help Center, but I got repetitive suggestions or 'solutions' that didn't work. Whenever I post an entry in my open question, I get the same suggestions over and over again. I realized that I'm only receive automated messages, and that no one really looking to my problem to offer assistance of effetive.

  Can anyone help me please with a decent and effective action?

  S ' Please don't ask if I tried different browsers, if I optimized browsers or if I tried other computers. I tried all of these options.

  S ' Please don't tell me reset the password. Your system says "there is a temporary problem" every time it has been 4 days, so it is not temporary, of course.

  -I would like someone to reset my password for me and send me a link to open my email. I have to open my email! I used it for over 14 years now, and this has never happened before!

  Please do not ignore this. Read it carefully and help me!

  Moreover, the account in question is the * address email is removed from the privacy *.

  Hi annao,.

  I don't know if you've already been on this link, but just in case, please see below:

  http://explore.live.com/Windows-Live-Hotmail-hacked-account-FAQ

  Also, as Windows Live has it's own Forum I'd followed with your other thread you posted in for assistance.

  Thank you!

• access to the file on the server goes down

  following my directory tree
  
  -root-
  -file1.php
  -file2.php
  -file3.php
  -folder1 (dir)
  -file4.php
  -textfile.txt
  
  
  the following code works for the first three pages in the poster, but not the fourth.
  
  the fourth MUST be here for the other links work properly, I tried to use the fourth at the root, does not work.
  
  What is the correct syntax to allow script access to the files in the root directory when the command is executed with a folder that is located in the directry root.
  
  I tried
  
  ./
  ./.. /
  .. /
  and with no attack. or / of
  
  None of them work for all four pages.
  
  not sure but will try would this work if I use the COMPLETE system directory?
  
  It's what code that I use and that works for the first three pages. but not the fourth.
  
  $names = @file ('textfile.txt');
  $rand_titles = array_rand ($names, 5);
  
  
  I hope someone can help with this problem.
  
  Thank you.
  
  

  Well, it was an afterthought and it woks...

  Follow the path of COMPLETE system to a working file.

• Unable to connect to the server on Money 2006 and have not changed the password

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Original title: Money 2006 cannot connect. The server is down. I have not changed my passwd. Can you help me

  Money 2006 can not connect.  The server is down?  I have not changed my passwd.  Help!

  Hey oldturkeyhunter

  you will get the best support if repost you in the forum of money microsoft specific to the link below

  Use this forum to discuss Microsoft Money. This includes money, more and more older versions.

  http://social.Microsoft.com/forums/en/money/threads

  Walter, the time zone traveller

• Secondary HA failover of the server URL does not

  Hi all

  Ive set up a Foglight HA environment but I keep having a problem getting the fail URL to work.

  e.g. the IP address of the primary server 10.10.10.1 (active)

  When I type the IP address in the browser to test whether it will redirect to the primary server (active), he gives a page cannot be secondary servers display message.

  Can some please help?

  Concerning

  CM

  Is this also the case if you primary fails?  If the primary is in place and running the day before may be not accepting connections.

  Check this box

  https://support.quest.com/SolutionDetail.aspx?ID=SOL46114&PR=Foglight

  46114 knowledge article

  RSS subscription

  close

  The solution that you want to subscribe covers a number of software products from Dell. Please choose the one that is of primary interest;

  
   

  Foglight

   
  • Return

  • Title

    In a Foglight HA installation what URL you hit to access the console?

  • Description

  Question: In a high availability installation Foglight what URL you hit to access the console? You have to know which server is primary and hit this one, or if the server goes down you are automatically redirected to the correct FMS?

  • Resolution

  Answer: You need to hit the URL of the primary there is no common URL. Using a proxy is the way to give users a common URL and automatic redirection in the event of failure of the primary.

  and this

  http://eDOCS.quest.com/Foglight/567/files/FoglightHighAvailability_Field.PDF

  "Mode high availability is a configuration of multiple Foglight management servers in a cluster where a Management Server is the primary server and the others are backup servers. If the primary server stops responding, one of the servers in the cluster HA standby takes over the responsibility of monitoring. HA mode uses redundancy and failover to ensure that Foglight monitoring continues without interruption. "

  Golan

• http using aaa authentication when Ganymede server is down

  I installed AAA using Ganymede and everything works well except for authentication http through a browser or a network Assistant when the RADIUS server is down. For console and telnet connections, the default authentication line when Ganymede is out of service.

  AAA new-model

  AAA authentication login default group Ganymede + line

  AAA authorization exec default group Ganymede + authenticated if

  AAA accounting update newinfo

  AAA accounting exec default start-stop Ganymede group.

  only AAA 0 default stop accounting controls group Ganymede +.

  only AAA 1 default stop accounting controls group Ganymede +.

  accounting AAA commands default 15 stop only Ganymede group.

  !

  aaa IP http authentication

  !

  radius-server host 10.161.161.20

  111111 radius-server key

  It must be something with the fact that on http or ANC, it connects to the router at level 15, but I have played with all sorts of orders of different authorization and cannot operate.

  Paul

  What you want to do for authentication if the RADIUS server is down? For telnet and console access you can use the line as a backup method because it is possible to configure a password for the line on the console and vty ports. Which type of backup method you want for HTTP? The one that seems most logical to me would be to a local authentication in order to cover the situation where the server is down.

  To use local authentication, you must do the following:

  -create a definition of the local user (maybe more if you need extended security).

  -specify a special method for authentication of the aaa.

  -specify that http, using the special method.

  The configuration might look like this:

  password user tech1 tech1

  AAA authentication login http_auth group Ganymede + local

  IP http authentication aaa - authentication of the connection http_auth

  Or you can decide to use the secret to activate (or password that is configured in office). The config might look like this:

  AAA authentication login http_auth group Ganymede + activate

  IP http authentication aaa - authentication of the connection http_auth

  If you want a different backup method, let us know what it is and we'll see how it could be implemented.

  HTH

  Rick

• Windows 7 Advisor - cannot reach the server

  I installed the Windows 7 advisor and both yesterday and today, he cannot reach the server updates - or before scanning - so it does not work for me.  Any ideas? The server is down? I can access many other things!

  It seems to run normally today.

• IOM server can be started without an administrator of the server running?

  We have configured a 11 GR 2 IOM in high availability environment, we set up two nodes and an administrator of the server, the server administrator is running on node 1, If this node fails for hardware problems, we risk not being able to start the node 2 If this does not work too. The question is: can be Server IOM be launched on node 2 without the administrator of the server running?

  
  

  Any help is appreciated.

  Thank you and best regards,

  You can start servers managed weblogic which is running IOM on even when the administrator of the server is down.

  Basically, once there is a managed instance has started successfully (IE with the connection to the server administrator), these details are cached locally to the managed server and it can use that starts when the administration server is not available. This type of startup is called MSI, see http://docs.oracle.com/cd/E28280_01/web.1111/e13708/failures.htm#START162

• can not display the webpage error something about the Server internal and 500 are down for maintenance

  can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message.  tried to restart and got the same answer.  Just set Windows to update when I logged on tonight.

  Hi ginnypierson,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.

  Before you start the troubleshooting steps, I need the information required

  1. what web browser do you use?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular website?

  Method 1:

  If you use Internet explorer, I suggest you to see link and check.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Method 2:

  I suggest you to see link and check.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Application server is down at the moment

  Hi all

  I installed Peoplesoft 9.1 PT 8.5 on a stand-alone PC. Whenever I start my PC, I start the database, the application server, process and Web Server Scheduler, and it works very well. However, I noticed that if I leave open my PC without touching Peoplesoft for awhile and when I try to log in the back, he always says "the application server is down at the moment" and if I try to start the Server Application again, it says "already running."

  From now on, the only solution I've found so far is to close the application server and start it again.

  Please guide.

  Kind regards

  Mohsin

  Hi Mohsin,

  Looking at the error, I think that you are using Windows server for the application server. Can you please try to start the application server with the admin account, which automatically disconnect after a certain time.

  Thank you