Access to the flash internal

Similar Questions

• the guest account can access encrypted USB flash drive?

  So here's the scenario

  I encrypted an external usb flash drive.  If I have access to this USB key, enter my password, decrypt the USB key. then close the session,

  and go to access as a guest (ALWAYS logged IN MY ACCOUNT) so that the family can use my computer,

  What happens to someone else, they can access the flash drive which has been deciphered from my account?

  should not the external drive is accessible to the account, that it has been deciphered?

  Once the drive is mounted (enabling access through decryption as well) is accessible to all users.

• Access to the internal mail (Exchange) by centimeters remote VPN server

  Hi all

  I have a problem in the configuration of ASA 5510 to access my internal mail (Exchange) through remote access VPN server

  one... I have set up my D-Link ADSL router to port before the SMPTP (25) & POP3 (110) to the external interface of ASA 5510 (192.168.5.101 255.255.255.0)

  b. How can I configure ASA 5510 (using ASDM) to portforward (SMTP POP3 110 25) to my internal mail server with IP 192.168.50.2 255.255.255.0

  c. my internal LAN network (192.168.50.0 255.255.255.0) is coordinated at 10.1.1.0 255.255.255.224 for vpn clients

  d. my IP of mail server (192.168.50.2 255.255.255.0) will also be translated while clients are accessing content through remote VPN access

  e.What IP (Exchange of IP of the server (192.168.50.2) do I have to set up in Microsoft Outlook (incoming & outgoing mail server), vpn clients receive using a NAT IP 10.1.1.10

  Here's my configuration details of access remote vpn

  : Saved

  : Written by enable_15 at 13:42:51.243 UTC Thursday, November 27, 2008

  !

  ASA Version 7.0 (6)

  !

  hostname xxxx

  domain xxxx

  enable the encrypted password xxxxx

  XXXXX encrypted passwd

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP 192.168.5.101 255.255.255.0

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.50.101 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  !

  interface Management0/0

  nameif management

  security-level 100

  management only

  IP 192.168.1.1 255.255.255.0

  !

  passive FTP mode

  list of access inside the _nat0_outbound extended permits all ip 10.1.1.0 255.255.255.224

  allow a standard vpn access list

  outside_cryptomap_dyn_20 list of allowed ip extended access any 10.1.1.0 255.255.255.224

  vpn-ip-pool 10.1.1.10 mask - 255.255.255.0 IP local pool 10.1.1.25

  Global interface 10 (external)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 10 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 192.168.5.1 (D-Link ADSL router LAN IP) 1

  internal vpn group policy

  attributes of vpn group policy

  Split-tunnel-policy excludespecified

  Split-tunnel-network-list value vpn

  WebVPN

  xxxxx xxxx of encrypted password privilege 0 username

  attributes of username xxxxx

  Strategy-Group-VPN vpn

  WebVPN

  ASDM image disk0: / asdm - 508.bin

  don't allow no asdm history

  ARP timeout 14400

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-SHA edes-esp esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card outside_map 655535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  tunnel vpn ipsec-ra group type

  VPN tunnel-group general attributes

  ip vpn-pool address pool

  Group Policy - by default-vpn

  Tunnel vpn ipsec-attributes group

  pre-shared-key *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  dhcpd lease 3600

  dhcpd ping_timeout 50

  enable dhcpd management

  !

  Policy-map global_policy

  class inspection_default

  inspect the dns-length maximum 512

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  : end

  So can someone help me, how can I configure these tasks

  You can without problem

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• internal web server access to the content of the network using the public ip address

  Hi, I saw similar topics, but not a clear answer about it. I have a PIX 515e with two interfaces, a web server internal (ip 192.168.0.5) and internal users want to access the server by its (99.99.99.9) ie public ip address is not using DNS. Tried the command alias ' alias (inside) 99.99.99.9 192.168.0.5 "but does not work for http. I can access the server on the local network using the public address for smtp, pop3 and ftp with or without command alias, but not the http service. Any idea?

  a few quick comments.

  a function of the command "alias" is to force the pix to manipulate the dns response. However, you mentioned that you didn't use dns.

  'alias' command will also force the pix to send traffic to 192.168.0.5 when it receives a packet from the inside and intended to be 99.99.99.9. However, since the host and the server are located in the same segment, i.e. pix must re - route the packet to the inside interface, and this operation is not supported with pix v6.x.

  In addition, you mentioned the inside host can access the smtp, pop3 and ftp using 99.99.99.9. This is interesting because the host of 192.168.0.0 would not directly have access to the host of 99.99.99.x without router.

• When trying to download Adobe Flash player, error, do not have access to the installation program

  I have a windows 7 64-bit and I am the administrator, but when I try to download flash player, it says that I don't have access to the installation program, now I'm without flash and almost nothing works. Any ideas?

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• Adobe flash player 11.0 blocks access to the Web site home pages

  Why is Adobe flash player 11.0, allowed to block access to the Web site home pages, until their trash is installed?  They should be prosecuted for punishment of the loss of time by Internet users, who spend countless hours trying to fix their garbage, which takes control of the web and blocks PCs access to their program settings, unless it is done according to their specific updates. N ' ILS OWN INTERNET and everything on it, or what?

  Are you sure he blocked it, or the web page requires Flash Player to see this?

  Most web pages require an element of Adobe Flash Player.

  First of all, try to enable Active Scripting in the areas of Sites Internet Options, security settings, trust.

  You should also add a corrupted on.

  Click Start, type: Internet Options

  Press enter

  Select the "Advanced" tab

  Under reset Internet Explorer settings, click "reset".

  This should restore the Internet Explorer default settings.

  Then reinstall Flash Player

  http://get.Adobe.com/flashplayer/

  ----------

  Flash Player

  Troubleshoot installation of Flash Player for Windows

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Troubleshooting player stability and performance

  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Uninstaller

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Flash Player Support Forum

  http://forums.Adobe.com/community/webplayers/flash_player

• cancel the right of access to Adobe Flash Professional CC,

  Hello

  We want to cancel a right of access to Adobe Flash Professional CC

  which is the right if we use our monthly payment

  But always keep the membership.

  Could you help me?

  Thank you.

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need a ins

  I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need an installation file that won't connect to the internet. -help

  Hi colinkerr22,

  Offline installers are displayed at the bottom of the Installation problems | Flash Player | Windows in the section "problems".

  --

  Maria

• Access to the Camera Roll AS3 Flash CS5.5

  Hello

  I'm looking and looking, but can´t can't find anything on access to the camera and camera to take a picture of my application, nobody has any code to do?

  No class please, just AS3

  Or perhaps point me to a URL?

  Thank you

  There are a few differences between the two needs. For fun, I made an entry screen to turn the example of aid for CameraRoll a timeline version! Here is the registration form:

  http://XFiles.funnygarbage.com/~colinholgate/video/camerrolltimeline.mov

  and here is the final code, which includes the error various trapping, and Android support too:

  import flash.media.CameraRoll;

  import flash.media.MediaPromise;

  import flash.media.MediaType;

  import flash.events.MediaEvent;

  import flash.events.Event;

  import flash.display.Loader;

  import flash.display.Sprite;

  import flash.events.IOErrorEvent;

  import flash.display.StageAlign;

  import flash.display.StageScaleMode;

  var mediaSource:CameraRoll = new CameraRoll();

  CameraRollTest();

  function CameraRollTest() {}

  This.stage.Align = StageAlign.TOP_LEFT;

  this.stage.scaleMode = StageScaleMode.NO_SCALE;

  If {(CameraRoll.supportsBrowseForImage)

  Newspaper (or "Browsing for image... ») ;

  mediaSource.addEventListener (MediaEvent.SELECT, imageSelected);

  mediaSource.addEventListener (Event.CANCEL, browseCanceled);

  mediaSource.browseForImage ();

  } else {}

  Log ('navigation in camera roll no is not supported.");

  }

  }

  var imageLoader:Loader;

  function imageSelected (event: MediaEvent): void {}

  Log ("picture... ») ;

  var imagePromise:MediaPromise = event.data;

  imageLoader = new Loader();

  If {(imagePromise.isAsync)

  Log (' media asynchronous promise. ");

  imageLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, imageLoaded);

  imageLoader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, imageLoadFailed);

  imageLoader.loadFilePromise (imagePromise);

  } else {}

  Log (' media synchronous promise. ");

  imageLoader.loadFilePromise (imagePromise);

  this.addChild (chargeurImage);

  }

  }

  function browseCanceled (event: Event): void {}

  Log ("Image Browse cancelled.");

  }

  function imageLoaded (event: Event): void {}

  Log ('loaded asynchronously Image.");

  this.addChild (chargeurImage);

  }

  function imageLoadFailed (event: Event): void {}

  Log ("Load Image failed.");

  }

  The function log (text: String): void {}

  trace (text);

  }

• How can I stop the URLLoader access caching in the Flash development environment

  I am loading an external XML file when it is in the Flash development environment. ActionScript 3.0 (CS3) accesses the XML file using URLLoader. All right until I need to change the XML file. When you test the Flash application in the development environment, he does not see the changes I made to the XML file, because the URLLoader is sort of caching the results. For example, the XML file is exactly the same. It's very frustrating. Is there a way I can blow this cache so that URLLoader is obliged to load the XML file? Currently, I have to restart the Flash environment or change the name of the XML file. Whatever it is, it's painful. Thank you.

  What do you mean «if the XML target is local...» » ???  If it's local it is not hidden.  otherwise it's.

  If your xml file is not local in addition a changing query string:

  "www.domain.com/xml/yourxml.xml?queryS=" + Math.Random ();

• Cannot access the Flash drive

  I recently got a laptop (Lenovo, 6-8 years but initially ran old, running Windows 7 Vista.) and I plugged my USB key and was able to use it. A few days later (I had stayed at a friend's House and I left the drive in the laptop, so I have taken into account the fact that it could become corrupted). I was unable to use it. I can't try to change the drive letter for the drive does not appear in disk management and it gives me an error message saying 'Please insert a disk in the removable (e :)) disk '. When a look at the properties, the driver is good, but no data appears either. II is 16GB and I had about 10 GB of data on it. When I inserted the disc in my computer that is running Windows 8, the USB has not even appear. Device drivers have been installed, but when I went to the Windows Explorer, there is no drive not showing.

  Hi Sam,

  According to the description of the problem, it seems, the Flash drive is dead and it is not get recognized.

  If the Flash drive is under warranty, contact the manufacturer of the drive to be replaced.

  However, you can also run the fixit to solve any problem with the computer and see if that fixes the problem:

  https://support.Microsoft.com/en-us/mats/hardware_device_problems/en-us

  Hope this helps, let us know if you need help with Windows.

• Regarding access to the ADF JS internal.

  Hello
  Is there a way we can get a handle to the ADF internal JS functions? My requirement goes something like this.
  There is a sign box\accordion that opens by clicking on the icon of the disclosure. I need to get a handle on this disclosure js function so that I can call it elsewhere on the page.
  Note: I currently do not have necessary to override the js function to do anything else, just call him also.
  Please let me know if this is possible and how.
  
  Kind regards

  Hello

  no need to use an internal API

  var Panel = AdfPage.PAGE.findComponentByAbsoluteId (showDetailPanelId);
  Panel.Broadcast (new AdfDisclosureEvent (Panel, true_or_false));

  Frank

• How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002

  How to download MicrosoftFixit50202.msi of the flash player for my not more long computer work - error 0 x 80070002.   I found the site for download fixit, but I have no desktop feature other than the startup repair options.  I thot I could download fixit from my flash drive solution, but I can't find a command prompt to access.  It is the only page from command prompt I can find... I'm in x:\windows\system32\cmd.exe trying to find the good order for my location flashdrive G:

  I used to go G and get G but it says only that go and get are not internal or external commands and not an executable program or batch file

  HELLLLLLLPPPPPPP!   Thank you!

  x:\ I do not think it is a 'valid' for what you intend. I used a 2nd computer and the original disk, I don't remember tho if I used windows file transfer or just copy, but I had the disc copied to the flash drive and reinstalled windows 7. I have still no working dvd rom (x 2) they open and close (sometimes), but the drivers need to be mounted to something incomplete. repair is absent as well. some other problems too but its been executed in this way for months (apx5). here and there, I get an email from answers, that's how I arived here really (enroute) hope this helps (a bit)

• Why not consult the Flash-based videos through a web proxy?

  We are an agency of the Government and require that all browsers to surf through a proxy because of web safety regulations. There is no way on our internal network to a desktop PC or his web browser or plugins to route traffic directly to the public Internet, and don't we have no access to the public Internet NAT either.

  All navigation on the web (including browser plugin traffic) must go through the proxy system or that it is not permitted to go... period.

  We must now be able to access videos in streaming Flash-base from a hosting out there on the Internet provider, and any of their videos will work. The tech in this business people are morons and have zero idea what proxy is same! When you try to open a video on their website, a sniffer shows that the Flash player plugin is not obedient settings for the proxy to the web browser (IE, Firefox, or Chrome), but instead seeks to make a track end around the proxy and achieve public IP address of the video server out there on Internet directly, which is impossible on our network.

  Other providers video Flash out there (YouTube, Hulu, etc.) have no problem through our proxies work and their videos play very well.  In fact, 99.9% of just about everything out there on the world wide web works without problem through our agents.

  Why is Flash videos do not work with our environment? Is this some configurations that the streaming video service company is that said the plugin Flash player to disobey the browser proxy settings and try to go live? Is there some setting of the local computer, can I change to force Flash Player to use the proxy?

  I'll ask around this subject tomorrow, but it seems that the data flow that is going through perhaps use RTMP.  There is no way for the player plain RTMP traffic through the proxy in the browser. By default, the RTMP traffic is sent through the port 1935, but browser proxies don't re - route non-HTTP traffic. It is, that's what makes the RTMPT variant, its traffic is routed via HTTP and the browser has the ability to route through a proxy.

  You have a link that you can share for the flow of problem?  I'll see if there is a way to determine what type of Protocol is used.  You can also check this thread that comes up when I search proxy rtmp.  Looks like the approach of sockify for the browser.  I also had some success with this in the past, if I used a different utility than that described in the article.

  Chris