Access to the OPC in a time zone different server console: security audit

Similar Questions

• The IPCC Outbound Option time zone setting

  Hello

  Option out of the IPCC, how can I set time zone for each customer record?

  I might be able to set the GMTZone and GMTZoneWOrk fields in the DB Dialing_List to set the timezone for each customer record. However, if I want to import a list of contacts file(CSV or fixed) using the function to import the Option out of the IPCC and the request function rules, how can I set the time zone in the file list of contacts?

  Have you had a glance at the documentation online for outgoing messages of ORC?

  Fundamentally, the outbound dialer uses the table Prefix in the region. The region and area prefix tables are configurable to the ICM Admin workstation.

  The prefix of each region has the zone attribute. If the Dialer is a region with the x prefix match first digits in the phone number, then time zone that is used when you place the call.

  There is a mechanism for bulk load the prefixes of the region in bulk insertion tools.

  The IPCC system comes pre-loaded with a set of prefixes of the North America region.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Necessary to define the database time zone differs from the OS

  We have a database of who currently resides in New York. Let's move to another server that resides in London. This is a problem, because each date which is currently in the time base is New York time, but after the move, all the new data that created time will always be time to London. We do not want users to have to remind any date preceding the date of move, will idle 5 hours if we would like to do is to have the database always on time in New York despite the BONE being London time. The server will be shared with other applications for the operating system time zone will have to remain with London time. The database will only have data for our application. So is there a setting of database that we can use to set the time zone database is different from the operating system time zone? The database is currently 10 GB but is promoted as part of the move to 11 g.

  What is the data type of the column? If the date or timestamp, then there is no time zone stored with the data. If timestamp with time zone, then the time zone of the data remains the same regardless of the time zone database and operating systems.

  SQL> select dbtimezone from dual;                    
  
  DBTIME
  ------
  -05:00                                               
  
  SQL> alter database set time_zone='EST';             
  
  Database altered.
  

• List based on the system date or time zone user

  Hello
  
  We have been questioning a service request list based on the timestamp created with criteria = today.
  
  But the result is inconsistent. Sometimes records created within today do not appear on the list.
  
  What is the definition of SOD ' today ' today '? It applies to the date system (time US) or Pacific time zone (for example the + 8) user?
  
  Thank you, SAB.

  Hi Sab!

  I did some tests and found that this is directly related to the user zone set on the user details page.

  I am with paris (gmt + 1) time zone, and when you go to the created SR list today, I have a lot of records.
  I set the time zone of eniwetok (gmt - 12). It is 11 now in france, therefore, with this zone, it is p 11 m yesterday.

  And when I went back on the list (after the closing session and connection), there is no trace!

  I hope it's useful!

  Max

  Published by: Max K on Nov. 16. 2008 19:35

• Get write access to the VI API to allow stopping a server ESXi via Toolkit VI

  Shutdown, APC by 3i

  Referring to the above link and more precisely the following statement ' VMware ESXi 3.5u4 has just been launched and the internal API seems to have been fixed and exposed VI API will have only read-only access when you use the version of ESXi license.

  I did some playing with 3.5u4 ESXi and use the VI Toolkit to connect to the host of 3i. I have been unable to stop the ESXi host as it gives me the error "fault. RestrictedVersion.summary ".

  I understand the question (see this link fault. RestrictedVersion.summary).

  My question is how can I pay for that to work (which agents do I need to buy).

  In my scenario (small client under 15 users), I have a server terminal server in physics and I want to implement SBS on a box of 3i. I want to be able to issue a stop command to the area of 3i of the terminal server using the VI toolkit.

  So I'm able to buy an agent / license to allow write access to the API?

  My first thoughts were:

  • I need to purchase a license to host VirtualCenter for this box of 3i.

  • Then, he would be more free and I was able to 'write' API?

  • I guess on the SBS box, I wouldn't need to install virtual center, just the license service so I got somewhere to point the box of 3i in a location of license

  • VirtualCenter can be provided as a serial number or the host license?

  Any ideas or suggestions?

  I like the VI Toolkit to be able to issue the shutdown command, in turn will stop the VM guest for me.

  At least you need the Foundation license which includes vCenter. Which will give you full access r/w to the VI API, this limited restriction applies only to the free version of ESXi, you are aware of.

  This KB provides details on the type of license required for full access in RCLI: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006543

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  http://Twitter.com/lamw

• EliteBook 8460p nootbook: uninstall hp protect access to the tool Device Manager to remove HP protect Tools Security Manager

  I'm trying to update my Windows 10 computer and it says I need to remove "HP protect tools security Manager. I had to first remove the other programs, but now I can not remove the last "HP protect tools Device Access Manager" program a window pops up saying: you must be an administrator which I am on my computer. help please

  Tell him that you get another account with administration full wrights

  https://www.YouTube.com/watch?v=3NiTNj1pm2o

  made easy and you can uninstall everything, you need to activate this account when you are finished

• Make the same comp several times with different text

  Hello!

  I'm looking for a way to make my 100 + times with a different text in two layers. I thought batch replicate this model and then batch change text layers, but I've been Googling autour and found no solutions.

  I need is ready solution, just a direction on an approach I take to perform this task. Told me on another forum to ask here and there are a few scripts that are just what I need assistance excellent file as data. You could point me to them?

  Thank you!

  This is an old thread from Creative Cow that deals with a way to do what you want using a file text and Expressions:

  CreativeCOW

  There are also some commercial script tools that automate the process very well:

  CompsFromSpreadsheet 5 - aescripts + aeplugins - aescripts.com

  Templater - aescripts + aeplugins - Rig aescripts.com

• I tried the download items 3 times following different suggestions on the forum.

  I get the error message 109, but I am not convinced that I can try with out downloading Wizard download.  Any other suggestions?

  Hi J6211,

  Please see the solution to troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html

  If you continue to experience difficulties, you can try to start a direct download by following the steps listed in http://forums.adobe.com/thread/981369

• move the local ip address to a different server (problem natting)

  Dear,

  I have a local database server with a local ip 192.168.101.3 and cisco ASA 5500, I use nat static as below:

  #static (Interior, exterior) xx.xx.xx.xx 192.168.101.3 netmask 255.255.255.255

  the server has been broken, and we moved the data to another server and give him the exact address of the intellectual property.

  Now we can ping the actual ip side.

  Help, please.

  Thanks in advance.

  Hello Asad,

  I've seen this problem before, hosts with the firewall or anti virus windows will not respond to any other host that is not on their Local network.

  Customer think usually it is a question of ASA, but as soon as we set up a NAT (OUTSIDE) 10 your_public_ip

  Global (inside) 10 interface;   We can see how it works because the server will now receive the packets of the SAA within the interface

  Anyway glad to hear it works fine.

  Please check the question as answered so future users can pull of this

  Julio

• Recreate the database with backup to a different server

  Dear friends,
  
  I'm backup with RMAN
  
  Level 0 backup on Sunday and level 1 in week
  
  Now, I want to recreate this database on another server.
  
  Is this possible? I don't want to duplicate or cloning.
  
  Any suggestions?
  
  What we call this kind of recovery?
  
  Should I do something like that?
  

  Make a full backup all of current your database files instead of using the Level 0 or Level 1 backups.
  Place all database files to same directories.
  Create the Windows service if removed.
  C:\> oradim.exe -new -sid <ORACLE_SID> -startmode -manual
  
  Startup instance.
  C:\> net start OracleService<ORACLE_SID>
  C:\> sqlplus /nolog
  SQL> connect / as sysdba

  Thank you!

  Salvation;

  What is the version of DB?

  pelase see:
  How do I move/restore DB to new host and filesystem using RMAN [1338193.1 ID]

  Respect of
  HELIOS

• I use thunderbird in the New Zealand House and time zone settings, and when I invite people NZ for a new event it automatically creates a calendar for UTC entry

  I bought my computer laptop to the United Kingdom and installed Thunderbird there initially, but remains in NZ and reset home location and time zone accordingly. However, when I send invites to an event it resets the invite calendar for the recipient to UTC/GMT. My record of entry and invite calendar still shows what I entered in, but not their end. And it's the same thing in reverse, they send me something for 15:00, I get like 03:00.

  ... to restore the original location and time zone accordingly.

  Where exactly did you do that?

• POS 6.1 can choose the correct time zone please?

  Hello.

  IM at the stage of configuration VDP now (...:8543/vdp-configure) and I can't find the good zone time (I need UTC + 7). I use usually Asia/Krasnoyarsk tz, there are a lot of UTC + 7 areas here invalid time zone values and in the SLES itself BUT without these areas at the POS configure the web interface. Can someone tell me why? May be I can complete the configuration with wrong time zone and change later recreating the link/etc/localtime or in the console vm POS? Or should I choose correct time zone during the initial Setup?

  OK, I got a solution. Initial configuration of POS has been completed with the incorrect time zone. Then I changed timzone in the vm console VDP (define-> Asia-> Russia-> Krasnoyarsk time zone), but the bad timzone was still in the POS-configure page. However after the restart of the POS POS-configure vm page indicates the correct time zone (Asia/Krasnoyarsk). Unfortunately, I still can not choose this area to POS - configure-> time zone.

• How to set the server time zone at the Site level profile option

  Hello
  I have the problem that is mentioned in the note of support ' cannot display the chart of status or does not work after upgrade (Doc ID 304685.1). This note offers this solution:
  
  To implement the solution, please perform the following steps:
  
  1 set the profile server time zone at the level of the Site (which should be set to the value of database time zone).
  2 bounce the Apache server.
  
  I also read the notes 275876.1 , but I was not able to understand what exactly I need to do...
  
  Please, can you explain in words simple (or orders) how can I 'set the server profile zone at the level of the Site (which should be set to the value of timezone database)?

  >
  1 set the profile server time zone at the level of the Site (which should be set to the value of database time zone).
  >

  PL identify the zone where the database server. Using responsibility of the system administrator, search profile--> system, application of the profile to the site level, and then select the time zone appropriate to the LOV. Then save.

  HTH
  Srini

• How get/check out the time portion of timestamp with time zone?

  Using Oracle 10 g, I have a timestamp with time zone.
  
  We have treatment that uses hourly (as a shift of the day of treatment). I want to 'get' the time contained in a timestamp, so that I can compare it to one of our differences for example (pseudocode)
  
  If the time in the timestamp = 0 then
  treatment of midnight
  on the other
  do other hourly treatment
  FI
  
  I thought that "extract" was the right way to get the time portion of the time stamp, but it returns an interval based on UTC - so where I could expect
  
  SELECT extract (time OF THE TIMESTAMP ' 2009-06-08 00:34:56 Europe/London ') FROM dual
  
  to return to 0, it is actually 23 since it's time for the time zone UTC.
  
  Then... How should I be getting time in order to have it make 'sense' in the context of its time zone? I simply use to_char and analyze the time part?
  
  Thoughts?
  
  --
  Andy

  Not the literal timestamp ' 2009-06-08 00:34:56 Europe/London ' specifies TIMESTAMP (9) WITH ZONE TIME, subsequent DISTRIBUTION converts this TIMESTAMP value (6).