move the local ip address to a different server (problem natting)

Similar Questions

• Cannot SSH in vmware player (can use the local IP address but not external IP)

  As above

  Cannot SSH in vmware player (can use the local IP address but not external IP)

  Am new to vmware, so if you need information to help me on what you'll need to tell me how to get

  See you soon

  Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host.  Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port.  Then, you will be able to access from outside local physical host network.  If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine.  If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.

  Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

• [View 5.3] Connection to security through Blast Server redirected to the Local IP address private view Desktop in Google Chrome

  Hello

  I am currently facing a questions in my test harness which happens when I connect to public IP address on server security by the breath. No problem if I connect using view Client.

  Using the breath, I can log on, select a desktop view, then the url of the Web page showing my ip Server security for about 10 seconds and then I was redirected to the private IP address of NAT from the desktop view target and of course I couldn't connect.

  

  Note: The local private ip address redirection does not happens if I configured to connect to show the connection to the server through breath.

  I have:

  • Self-signed SSL installed without warnings
  • activated the tunnel to connect to the server
  • Tunneling on server security enabled
  • disabled all firewall for testing purposes
  • locally defined in the host file to resolve my domain name full of security server static IP used in my office. (vsecurity.icliq.com in this case)
  • required ports are configured with port forwarding in my router from office

  

  I hope someone could throw some light on this issue. Thank you

  
  

  Eddy
  

  Yes, the option of Blast Secure Gateway is used to ensure that Blast connections are routed from your browser by the server security (or connect to the server). That's what you want to access remotely. If you do not select this option, Blast connections will be direct to your virtual desktop. This is for internal connections.

  It goes the same for PCoIP and PCoIP Secure Gateway.

  Mark

• Whenever I start my PC, a message appears, says another user using the same IP address. Is this a problem

  Whenever I start my PC, a message appears, says another user using the same IP address.

  Is this a problem

  Yes.  One or both may not work properly.  If you use static IP ADDRESS a simple reboot of all devices should correct this.

• Move the external drive of Lightroom on new server

  I use Lightroom 6 (standalone - latest version) on an iMac. All Lightroom files are on an external drive attached in a hierarchy like this:

  Photos (folder)

  Lightroom Files (folder)

  LR-2 Previews.lrdata library (folder)

  Library of LR - 2.lrcat

  Photos of LR (folder)

  1999 (folder)

  2000 (folder)

  etc.

  etc.

  I would like to move this set of the player to a network attached server and continue to access it from the iMac. Can I move the player, point Lightroom for the .lrcat file and continue? Additional measures should be taken?

  The connected server network is a Mac Mini running Mac OS Server (last).

  Thanks for any help.

  Previews and catalog file should stay together, if you don't move the previews they will be re-created by LR in any case

• Impossible to launch the store "we were not able to connect to the store.this could not have due server problem or the network connection has expired.

  Original title: PROBLEM WITH WINDOWS STORE

  Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.

  Hello

  Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.

  I suggest you create a new user account and checkif the problem persists.

  Create a new user account.

  Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Try to connect with the user account that is having right of the administrator and check if the problem persists.

  I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.

• Cisco ASA 5515 - Anyconnect users can connect to ASA, but cannot ping inside the local IP address

  Hello!

  I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.

  ASA Version 9.1 (1)

  !

  ASA host name

  domain xxx.xx

  names of

  local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask

  !

  interface GigabitEthernet0/0

  nameif inside

  security-level 100

  192.168.11.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description Interface_to_VPN

  nameif outside

  security-level 0

  IP 111.222.333.444 255.255.255.240

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  management only

  nameif management

  security-level 100

  192.168.5.1 IP address 255.255.255.0

  !

  passive FTP mode

  DNS server-group DefaultDNS

  www.ww domain name

  permit same-security-traffic intra-interface

  the object of the LAN network

  subnet 192.168.11.0 255.255.255.0

  LAN description

  network of the SSLVPN_POOL object

  255.255.255.0 subnet 192.168.12.0

  VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 711.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN

  Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  list of URLS no

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  LOCAL AAA authorization exec

  Enable http server

  http 192.168.5.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec pmtu aging infinite - the security association

  Crypto ca trustpoint ASDM_TrustPoint5

  Terminal registration

  E-mail [email protected] / * /

  name of the object CN = ASA

  address-IP 111.222.333.444

  Configure CRL

  Crypto ca trustpoint ASDM_TrustPoint6

  Terminal registration

  domain name full vpn.domain.com

  E-mail [email protected] / * /

  name of the object CN = vpn.domain.com

  address-IP 111.222.333.444

  pair of keys sslvpn

  Configure CRL

  trustpool crypto ca policy

  string encryption ca ASDM_TrustPoint6 certificates

  Telnet timeout 5

  SSH 192.168.11.0 255.255.255.0 inside

  SSH timeout 30

  Console timeout 0

  No ipv6-vpn-addr-assign aaa

  no local ipv6-vpn-addr-assign

  192.168.5.2 management - dhcpd addresses 192.168.5.254

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint6 point

  WebVPN

  allow outside

  CSD image disk0:/csd_3.5.2008-k9.pkg

  AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

  internal VPN_CLIENT_POLICY group policy

  VPN_CLIENT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - 5 concurrent connections

  VPN-session-timeout 480

  client ssl-VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  myComp.local value by default-field

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  time to generate a new key 30 AnyConnect ssl

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 30

  dpd-interval gateway AnyConnect 30

  AnyConnect dtls lzs compression

  AnyConnect modules value vpngina

  value of customization DfltCustomization

  internal IT_POLICY group policy

  IT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - connections 3

  VPN-session-timeout 120

  Protocol-tunnel-VPN-client ssl clientless ssl

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  field default value societe.com

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  AnyConnect dtls lzs compression

  value of customization DfltCustomization

  username vpnuser password PA$ encrypted $WORD

  vpnuser username attributes

  VPN-group-policy VPN_CLIENT_POLICY

  type of remote access service

  Username vpnuser2 password PA$ encrypted $W

  username vpnuser2 attributes

  type of remote access service

  username admin password ADMINPA$ $ encrypted privilege 15

  VPN Tunnel-group type remote access

  General-attributes of VPN Tunnel-group

  address VPN_CLIENT_POOL pool

  Group Policy - by default-VPN_CLIENT_POLICY

  VPN Tunnel-group webvpn-attributes

  the aaa authentication certificate

  enable VPN_to_R group-alias

  type tunnel-group IT_PROFILE remote access

  attributes global-tunnel-group IT_PROFILE

  address VPN_CLIENT_POOL pool

  Group Policy - by default-IT_POLICY

  tunnel-group IT_PROFILE webvpn-attributes

  the aaa authentication certificate

  enable IT Group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  : end

  Help me please! Thank you!

  Hello

  Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.

  Thank you

  swap

• move the e-mail address to address book

  When an e-mail arrives and I want it in my address book, how do I do that

  When you view a message in the messages pane, a tab or a new window, you will see a star to the right of the address of the sender. If the star is filled with color that is already in one of your address books. If the star is not filled with color, you can click on it to add it to your address book. Click on a star filled will open the Edit dialog box so you can make changes or additions to this contact.

  This isn't the same star which is located to the left of the message header in the Inbox window.

• move the subscription / phone number to a different account/Skype-name

  Hello

  I have 2 Skype numbers connected to my account. It's not optimal because I wish to convey two different mobile numbers and this is not possible. If I want to spend a number of a new Skype account, which will result in 2 different account, each tied to a Skype number.

  But I can't find a way to achieve this. I could cancel a subscription and claim to another account. But I'm not sure that this number is available immediately.

  Anyone have any idea?

  Thank you.

  Hi, PvdB and welcome to the community,

  You are on the right track: because Skype does not allow the transfer of a function call, subscription or credit from one account to another, our only recourse is to terminate a subscription Skype number and start a new subscription to a new account, thus achieving the goal of being able to transfer two Skype two-digit numbers different mobile phone.

  You'd have to do without guarantee of success - would be to cancel one of the numbers Skype subscriptions (which would still be usable until the end of the subscription period), then wait 90 days when the number is held in reserve to reactivate your account, and then hope you can 'catch' the number when it came out in the pool of available numbers from which to choose.

  To keep things simple, there is no flexibility to changing plans or subscriptions.

  Kind regards

  Elaine

  __________________________________________________________________________________________________
  Your question has been answered? Please click on the link to accept as a Solutionfor everyone can quickly find what works! As a post or want to say, 'Thank You ' -? Click on the button of congratulations!
  Reliable information: Brian Krebs: 3 basic rules for online safety

• Touch a touch monitor moves the cursor to respond on a different system Windows Vista multi-display monitor

  Hello!

  I joined just a touchscreen multi-touch Dell ST2220T the VGA on a Toshiba laptop. The multiscreen correctly display features, however touch events on the new monitor are sent to the screen of the laptop. There doesn't seem to be a way to make the new monitor the primary monitor, as in something similar here. In addition, if the option to solve this problem in a similar way to this solution exists in Windows Vista, it is certainly well hidden. I've sifted through all the options in Vista and came away empty-handed.
  No one knows how to fix this problem on WIndows Vista with a built-in screen that can not be changed by default?

  Hello

  Is the touch screen as the default monitor?

  Set up your touchmonitor active by default. To do this follow the steps mentioned in the link below

  Change-Display-Settings-on-multiple-Monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  For more information, see the links below

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• Move the "Data Service" volume ZFS on OSX Server

  Hi all

  I would like to move all the data service to a ZFS volume on a Mavericks OSX Server. This option can be found here:
  Server.app-> your server-> settings
  and is called "Data Service". As someone has already done this? It works or what I have to do a manual config, whenever the server restarts?

  Hi all

  So I'll answer my own question.  The answer is no, in fact, the app Server does not detect even the zfs volume.  I also try to cheat and to synchronize the/Library/Server volume ZFS and softlink then the original file to the copy of the zfs volume, but App Server would no longer work.

  Then Mac OS x still don't like ZFS much.

  I reformatted the drive with appleRAID, and then I could move everything using the button in the application.  I noticed that this original file is still there.  If it's really just an arrangement written somewhere.  Anyone know where this parameter is written?  Maybe I could get data on the ZFS drive sync and write this setting by hand.

• Access to the OPC in a time zone different server console: security audit

  Hello

  I noticed this on several instances when CPO console in a time zone (example: CSE) tries to access an OPC server in any other time zone, the console is unable to connect to the OPC Server and I see this error message:

  "An error has occurred during the security check for the message"

  Is there a known issue with the console to access the OPC Server and a handshake that goes?

  Newspapers:

  @@Logging the process Tidal.Automation.Console.Loader.exe (id = 13248)

  || 8. 06/03/2013 19:20:00.365 | 13736. Failed to get server ID for Assembly store connection:

  || 9. 19:20:00.366 06/03/2013 | 13736. EXCEPTION (System.ServiceModel.Security.MessageSecurityException): A secure or incorrectly secured error was received from the other party. See the inner FaultException for the code of error and detail.

  Stack trace:

  Server stack trace:

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.ProcessReply (answer Message, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.Request (Message message, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation (SecuritySessionOperation operation, target EndpointAddress, Uri, SecurityToken currentToken, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore (TimeSpan timeout)

  at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken (TimeSpan timeout)

  to System.ServiceModel.Security.SecuritySessionClientSettings'1.ClientSecuritySessionChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce (TimeSpan timeout, CallOnceManager waterfall)

  at System.ServiceModel.Channels.ServiceChannel.EnsureOpened (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)

  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)

  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:

  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)

  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)

  at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId)

  at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles)

  || 10. 19:20:00.366 06/03/2013 | 13736.   EXCEPTION INTERNALLY (System.ServiceModel.FaultException): An error has occurred during the security check for the message.

  Stack trace:

  || 11. 19:20:37.696 06/03/2013 | 13736. Failed to get server ID for Assembly store connection:

  || 12. 19:20:37.696 06/03/2013 | 13736. EXCEPTION (System.ServiceModel.Security.MessageSecurityException): A secure or incorrectly secured error was received from the other party. See the inner FaultException for the code of error and detail.

  Stack trace:

  Server stack trace:

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.ProcessReply (answer Message, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)

  to System.ServiceModel.Channels.SecurityChannelFactory'1.SecurityRequestChannel.Request (Message message, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation (SecuritySessionOperation operation, target EndpointAddress, Uri, SecurityToken currentToken, TimeSpan timeout)

  at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore (TimeSpan timeout)

  at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken (TimeSpan timeout)

  to System.ServiceModel.Security.SecuritySessionClientSettings'1.ClientSecuritySessionChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.OnOpen (TimeSpan timeout)

  at System.ServiceModel.Channels.CommunicationObject.Open (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce (TimeSpan timeout, CallOnceManager waterfall)

  at System.ServiceModel.Channels.ServiceChannel.EnsureOpened (TimeSpan timeout)

  at System.ServiceModel.Channels.ServiceChannel.Call (String action, ProxyOperationRuntime, Boolean, Object [ins] oneway operation, Object [], TimeSpan timeout breaks)

  to System.ServiceModel.Channels.ServiceChannelProxy.InvokeService (IMethodCallMessage methodCall, operation of ProxyOperationRuntime)

  at System.ServiceModel.Channels.ServiceChannelProxy.Invoke (IMessage message)

  Exception thrown once again [0]:

  at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage (IMessage reqMsg, IMessage retMsg)

  at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke (MessageData & msgData, Int32 type)

  at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId)

  at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles)

  || 13. 19:20:37.696 06/03/2013 | 13736.   EXCEPTION INTERNALLY (System.ServiceModel.FaultException): An error has occurred during the security check for the message.

  Stack trace:

  More important than if their zones are different if their * time * differ.

  12:00 EST = 09:00 in PST as long as everyone (including Windows) is concerned.

  If both are 12:00 then the synchronization time is the problem, and this would cause problems of authentication handshake.  NT authentication allows only something like 10 minutes of clock skew.  My example here has 180 minutes of clock skew.

• Recreate the database with backup to a different server

  Dear friends,
  
  I'm backup with RMAN
  
  Level 0 backup on Sunday and level 1 in week
  
  Now, I want to recreate this database on another server.
  
  Is this possible? I don't want to duplicate or cloning.
  
  Any suggestions?
  
  What we call this kind of recovery?
  
  Should I do something like that?
  

  Make a full backup all of current your database files instead of using the Level 0 or Level 1 backups.
  Place all database files to same directories.
  Create the Windows service if removed.
  C:\> oradim.exe -new -sid <ORACLE_SID> -startmode -manual
  
  Startup instance.
  C:\> net start OracleService<ORACLE_SID>
  C:\> sqlplus /nolog
  SQL> connect / as sysdba

  Thank you!

  Salvation;

  What is the version of DB?

  pelase see:
  How do I move/restore DB to new host and filesystem using RMAN [1338193.1 ID]

  Respect of
  HELIOS

• Local disk C has the least space, where the Local D drive has much more space: problem is drive C starts instead of because...

  I had to reinstall XP. Before reinstallation, D drive was the drive started on my computer and I have not had any problems with space. Obviously I screwed up letting it keep the partitioned drive or what I had to do at some point, because after reinstalling XP C drive the drive that begins (C has no space and D wants everything as before). Now, I don't have enough space to download programs, I need to work from. In fact, I don't have enough room to do anything! C drive only has 7. something GB on it compared with with 30 0r 32 GB!

  How can I get the D drive and do what is now drive C? Alternatively, I can change somehow D drive where all downloads to go and work from there anyway? I don't know how to change where a download will. Can someone please help me out here because I'm way behind with work; cannot afford professional maintenance COMP.; and have no idea what to do.

  Hello

  You may need to back up important data on the computer and and then format the D; drive to remove all the installation files and creates the disk space.

  Also I suggest you perform a disk cleanup on the computer. To get the procedure you can refer: Description of the tool in Windows XP Disk Cleanup: http://support.microsoft.com/kb/310312

  And uninstall unwanted computer programs, see: remove programs you don't need more: http://www.microsoft.com/windowsxp/using/setup/maintain/removeprog.mspx

• get the local host ip address

  For the convience of the end user, I would like to publish the ip address of the host on the front panel of the progr.  Is there a vi or something that will return the local ip address?

  See this post:

  http://forums.NI.com/T5/LabVIEW/hOW-to-find-the-IP-address-of-a-system/TD-p/784636