Access to windows vista

Similar Questions

• How to access my windows vista speech recognition software

  I saw that there is a function to convert the word to txt I would just know how can I to use on Windows vista?

  Please see:

  Accessibility in Windows Vista - speech recognition

  Windows Vista Speech recognition demo .

  There are also some 3rd party software available.

• Cannot access the Windows Vista operating system

  I read many entries of Vista users have the same problems of power outage, my laptop Dell just meeting after an update from Ms.  I can't access my operating system Vista same not the log in page after many attempts to solve the problem, starting with all the pre boot options on the f12, f2, f8 recovery CD! No go on all suggested corrections.  MS did NOT address this issue properly given what I've read.  MS is directly responsible for this problem and I ask a fix or a solution with no cost to me.  It wouldn't surprise me to learn that it is an intentional malicious attack by MS and or its subsidiaries.  I want some solutions and the solutions to this problem of power outage.   My computer hardware and memory passed check system tests.  I expect a response soon from MS, you have my email address.

  Original title: Vista is DEAD

  I read many entries of Vista users have the same problems of power outage, my laptop Dell just meeting after an update from Ms.  I can't access my operating system Vista same not the log in page after many attempts to solve the problem, starting with all the pre boot options on the f12, f2, f8 recovery CD! No go on all suggested corrections.  MS did NOT address this issue properly given what I've read.  MS is directly responsible for this problem and I ask a fix or a solution free of charge I. It wouldn't surprise me to learn that it is an intentional malicious attack by MS and or its affiliates.  I want some solutions and the solutions to this problem of power outage.   My computer hardware and memory passed check system tests.  I expect a response soon from MS, you have my email address.

  Hello

  It is a community facility by Microsoft, but we're especially of volunteers helping posters for free, so there is no use demand anything from us.

  And Microsoft does not intentionally try and destroy their own business by doing what you claim they do

  We can try and help you with your problem, but if you have a complaint against Microsoft, you will have to contact Microsoft directly.

  _________________________________

  Information about updates:

  "Sometimes Microsoft offers updates for the 3rd party hardware: graphics, network cards, etc..

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the performance and security of your system"

  ________________________________

  Startup Repair:

  You can do a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  ________________________________

  Dell-information:

  Here are the options of relocation:

  How ro reinstall from the Dell recovery partition:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=DSN_336966

  Reinstalling the printer Dell supplied disk:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_339949

  And I hope that these links should provide an explanation for all of your problems:

  Reference Dell troubleshooting with startup problems:

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=DHS&docid=DSN_343119

  Run the built-in diagnostic software:

  http://www.Dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=BSD&docid=266787

  And if this does not resolve your problem, please contact Dell:

  http://www.Dell.com/support/contents/us/en/19/category/contact-information

  Or you could ask their Support Forums:

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• How can I fix the error Code OxC000005 Access Violation (Windows Vista 64 - Bit)

  How can I remove error Code OxC0000005 breach of access to my Windows Vista 64-bit computer.

  Thanks for your help.

  Hello

  1. When you encounter this error message?
   
  2. what hardware or software change has been performed on the computer before the question?
   
  Follow the links below to solve the problem.
   
  Method 1
   
  a. start your computer in safe mode
   
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  If the problem does not occur in mode without failure, then search software conflict third party by following method 1B.
   
  b. how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
   
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned above to start the computer normally, once you have completed the necessary troubleshooting.
   
  Method 2
   
  Analyze the computer for violations of integrity and corrupted files.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  
  Method 3
   
  An application may stop working unexpectedly on a Windows Vista SP1 or Windows Server 2008 computer
   
  http://support.Microsoft.com/kb/967227
   
  I hope this helps.

• my laptop did not come with a dvd and it wont let me login to access my windows vista computer

  I have a Compaq Presario Notebook PC comes with Windows Vista Home Premium already installed so I don't have a recovery disk.  My computer has been locked up and I couldn't leave the screen then I removed the battery and then reinstalled.  Now I can not access my login.  Here is the message I get.

  The service User Profoile Service failed the logon.  User profile cannot be loaded.

  Help, please!  Thank you.

  Maryann Ramsdell

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  and if you need to reinstall vista, here are the different ways to do it:

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• No access to Windows Vista Home Premium more - need help please!

  Hello

  I made the most stupidest mistake by not creating a password reset disk.  I have one account administrator, and this is my account, I use as well.  I am currently logged in as "guest".  I tried to create a password reset disk from another computer with Vista Home Premium and tried to reset my password, but can not, as happens with an error.  Now, I know that there must be a way to get new.  I have an idea of what is my password, but I could have made a typo when I re-printing and since disconnecting and tried to reconnect to test, it didn't.  Lycky for me, I have activated the Geust account for a friend to use.  So now I'm stuck.  I need to reconnect, so I'm desperate, and re - install Windows is not an option either.  Pretty anyone can help me please.  I tried all combinations and tried to make deliberate typos to see if I can get the correct password, but not to go at all.  And the geust account limit me to access what it is, I can't install of the software, it asks me my administrator password.  Is there another way around it.  Please please help.  If there is anything I can do in Windows, there's a few other kindof thing I can do at least.  All that will be a great help.

  Thanks in advance.

  Ryan McR

  Ryan McRayne

  Please read the following article support on Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

  The only step that we recommend that you take in this scenario is either restore your computer to an earlier point, or to do a clean install of the Vista operating system.

  The following items can help you with either:

  How to use system restore to log in Windows Vista when you lose access to an account

  http://support.Microsoft.com/default.aspx/KB/940765

  Installing and reinstalling Windows

  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  Thank you for using the Microsoft Vista support community, let us know if we can be of further assistance!

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Source of data TO MS Access on Windows Vista

  I have windows vista and MS Access 2007. Have created data sources successfully to SQL server, I get this error when you submit a data source to an Access database.
  
  "Impossible to update the registry NT.
  DRIVERPATH variable is not set.
  
  No idea how to get this right?

  After hours of frustration, I discovered that the problem is with Coldfusion, not 64-bit, Vista 64-bit. 64-bit Coldfusion does not support the access drivers.

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb403277#_Toc193176418

  Reinstall 32bits Coldfusion on your Vista 64 bit, and you will then have the "Microsoft Access with Unicode" pilot.

  Hallelujah!

• access for Windows Vista Manager

  I set parental controls on my computer.  I put a password on the computer for the Access Manager.  However, regardless of the site, I get a message requesting the password.  I even deleted the accounts set up to get rid of this message and stop having to use a password to access the info from the internet.  Nothing has worked.

  Can someone tell me how to get rid of this pain that I call 'box of Messenger of the Access Manager with "Please enter a password'?

  Thank you bunches!

  carol2112

  Hello

  In IE, click on Tools/Internet Options/Content tab, click the button to disable the Access Manager and the password. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• What can I do when my computer show me connected with limited access to Windows Vista

  After my laptop has identified the n WEP network it shows limited access

  Wat can I do to solve the problem?

  Hello

  Try going into your router settings and make sure all are correct.

  Have reset you your router recently? or replaced different model?

  Try to remove the old connection then recornect...

  http://www.TP-link.com/in/article/?articleid=214

  Concerning

  GT4U

• Repair system and recovery of Microsoft Windows Vista Home Premium (Build Date 2009)

  Install us a computer with Microsoft Windows Vista Home Premium for our son system (14 years) in 2009. The system was working fine until 2 weeks when he started to grab him and restarted on its own while he was his school assignments. He tried to solve the problem itself by following the instructions you are invited by the system as insert discs and repair... Having done this, the system now we cannot access Microsoft Windows Vista Home Premium?

  Please indicate how we can restore the computer system so that he could continue his school assignment? Thank you.

  Best regards,

  LSC

  Hi LSC007,

  Try the steps in this thread to solve the problem with internet connectivity.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No access to Windows Update in Windows Vista safe mode with network

  Since yesterday every time I connect normally to Windows Vista, the programs stop responding at random and nothing works Manager tasks even not so I am forced to close it manually, the only way that I normally use my computer is in safe mode

  I googled and someone who has had a similar problem to mine all downloaded updates critical to windows update and that seems to fix the problem

  My question is how can I access Windows Update in Safe Mode with network, because when I click on start - Windows Update, nothing happens and I cannot use windows install either.

  Thank you

  Hi Renee,.

  Please use the Community Forums for Vista.

  Probably not the cause, but enabling it does update race and there is probably a problem there.

  Well, let's see. If all your restore points are gone, it's bad. Often, it is a virus.

  Here's what we need. Error codes, messages, etc.

  If no pop up, go into the event viewer (just type in the search bar) and look in the logs of Windows, Applications, and system folders. Please only after the event. We just need the event id and the application causing him.

  Here's what you can do in the meantime.

  Run the checker system files and chkdsk.

  Get back to us with error messages and follow the directions below.

  Follow these steps.

  Type cmd into the search bar and press to enter.

  The chkdsk command line type, then press on enter.

  If it finds errors, type chkdsk /f to repair.

  Once that is complete, insert your windows installation disc in the drive and return to the command prompt. Type sfc/scannow, and then enter.

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will not be updated to Service Pack 2 with the access denied 0x80070005 error

  I bought a new computer, and it came with Windows Vista Home Basic SP1. I've updated every day and a great success until this. When I tried to install after pressing accept on the license agreement screen, when it says computer preparation. I get an error indicating that the Installation has failed. I also tried some work around and find myself without success. So far, I turned my (even uninstalled), kaspersky internet security ran system update tool, disable most of the startup process, reset the permissions in my registry and created a new user with privileges to administrator, but when I access the user created recently, after the box at the top left corner that says personilizing (in the classic windows theme) need me just a blue screen error-free. But I can still access the Task Manager and its been like that since.

  And I also did an accesskchk command that noted:
  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\Package_for_KB955430~31bf3856ad364e35~x86~~6.0.1.18005\InstallCounter
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP2-KB948465~31bf3856ad364e35~x86~~6.0.0.18005\InstallCounter

  is their anyway to fix this?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Could not access Console in Fallout 3 in Windows Vista... How to disable MIRC?

  I bought the game Fallout 3 a few weeks ago and has recently wanted to access the game console command line, but the game does not recognize the support of the tilde (~) key.  I spent many hours trying to figure out why this is the case, and I got three main answers:

  1. change the size of the screen that you can 'see' the console command line.  The size of my screen was already the right size, and it has not resolved the question of 'recognition of tilde.

  2. find Fallout Notepad, locate the line AllowConsole = x (where x represents a number any) and change x 1.  I found the notebook and the line, but the value was already "AllowConsole = 1".  I changed the number 0 and then back to 1, to see if that would be 'reset', but still no use of the tilde in the game key.

  3 turn off the infrared remote Microsoft (MIRC) in the eHome folder.  It is the recommendation given to me by the works of Bethesda, the company that produced of Fallout 3.  However, when I asked what particular file searching (there nothing specifically named "infrared" whatever it is, nor do any application with a name sounding similar open when I clicked it), I was given the same two paragraphs already listed on the site Web of Bethesda, if there is no progress.

  My question is this; How find/disable the MIRC involved with the Windows Media Center/eHome?  OR... there at - it another method to allow recognition of the tilde key (~) so that in games like Fallout 3?  Because he was such a topic posted on other forums by users of Vista (on laptops, for the most part), I hope there are a few out there who have faced this problem before, and have a solution.  I run with a laptop Asus M51 series with Windows Vista, if that helps at all.  Any comments would be greatly appreciated!

  Hello YoungSolshee,

  In addition to what Jack said, when you press the tilde key, you hold the SHIFT key also.  Most of the time that the cheat console will not work unless you enter in the ~ symbol and not only hit / press.

  Please let us know how it works for you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to access computer because the account password for Windows Vista has been forgotten and don't have a password reset disk/hard to find ways to restore the system... Help please

  Hello
  I'm stuck on the screen on my computer for my Windows Vista Home Premium 64-bit edition. The password to the user account has been lost, and now I am unable to access my computer. I don't have a created password reset disk so I can't reset the password. I searched these forums and seems the most effective way is to run a system restore to a time where I did have a password for my account. Fortunately for me, I did an automatic update of Windows that created a system restore point literally moments before I put the password, so I should be able to get access to my computer once I figured out how to get system restore to work. The advice I found on other forums do not seem to work, because I'm in my Windows vista operating system disc, but no screen is coming up with 'Repair your computer', which indicate the steps happen. I need assistance to find another way to run the system restore on boot menus/Vista/DVD CD. Thank you.

  Go to Bestbuy or other PC shop. They can fix it for you. (Could I have so I am not allowed to post these alternative instructions.)

• Easy access - filter keys are automatically re-enabled after Windows Vista starts.

  Hello!

  I'm using Windows Vista and my problem is the following.

  Even if I disable FilterKeys, whenever I start my computer, filter keys are enabled again.
  This causes me to use the on-screen keyboard to connect (my keyboard is disabled), then I have to go to control panel - easy access and disable FilterKeys. Once I disabled it, I can use my keyboard.

  You can imagine that this is really boring to do this each time I restart my computer.

  I tried to change the registry key: HKEY_CURRENT_USER\Control Panel\Accessibility\StickyKeys--> Flags = 507, and it did not work. (also tried value 506).

  Suspicion, support, tip will be really appreciated.

  Thanks in advance.

  Ripka

  HAE a look at this. Maybe what you need, if you have not already tried this method...

  Disable the irritating sticky keys or filter dialog box shortcut keys
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-the-irritating-sticky-filter-keys-popup-dialogs/

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.