Access VPN DMZ subnet

Similar Questions

• The VPN Clients need access to the subnet on another router

  Hello

  We have a pix 515e PIX Version 8.0 (2)

  We have two subnet 10.1.x.x/16 and 10.2.x.x/16

  The firewall is on 10.1.x.x and vpn clients can access this subnet.

  The firewall can ping 10.2.x.y where x is a server in the other subnet.

  On the 10.2.x.x customers out the firewall.

  The problem is that vpn clients cannot access the server of 10.2.x.y even if the pix can ping 10.2.x.y and the road for him.

  What I need to check that the vpn rules are correct in the pix 515e?

  I think it is a rule of exemption nat or something like that not exactly sure.

  Everything would be a great help.

  Thank you

  Hello

  For clients VPN access to these subnets, check the following:

  1 NAT exemption include these subnets (if not using NAT)... it's the NAT0 ACL command

  2. these subnets is included in the split tunneling

  3. these subnets have a route to the PIX to send traffic to the VPN client pool.

  4. There are no ACLs not applied to the inside interface of the PIX deny this communication.

  Federico.

• Remote access VPN Cisco ASA

  Hello!

  I have 9.1 (3) version of Cisco ASA with remote access VPN set UP on the outside interface. When the user connects to the Internet on the outside interface, it works well. My goal is to allow the connection of all other interfaces (inside the dmz and etc.) to the outside interface. Cisco ASA allows to do? Order to packet - trace output is less to:

  MSK-hq-fw1 # packet - trace entry inside tcp 10.10.10.1 14214 1.1.1.2 443

  Phase: 1

  Type:-ROUTE SEARCH

  Subtype: entry

  Result: ALLOW

  Config:

  Additional information:

  developed 1.1.1.2 255.255.255.255 identity

  Phase: 2

  Type:-ROUTE SEARCH

  Subtype: entry

  Result: ALLOW

  Config:

  Additional information:

  developed 1.1.1.2 255.255.255.255 identity

  Result:

  input interface: inside

  entry status: to the top

  entry-line-status: to the top

  the output interface: NP identity Ifc

  the status of the output: to the top

  output-line-status: to the top

  Action: drop

  Drop-reason: (headwall) No. road to host

  Hello

  Well, you can of course turn VPN on other interfaces, but to be honest, I never even tried to set up the VPN it otherwise than of multiple multiple external interfaces in the case of the ISP and in this case only for testing purposes.

  Some things related to the ASA are well known but not well documented.

  The official document that I can remember: this is the following (which only refers to this limitation regarding the ICMP)

  Note 
  For  security purposes the security appliance does not support far-end  interface ping, that is pinging the IP address of the outside interface  from the inside network.
  

  Source (old configuration guide):

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa71/configuration/guide/conf_gd/trouble.html#wp1059645

  -Jouni

• Unable to SSH/telnet through the remote access VPN to ASA interface

  Hi all - im trying to SSH/telnet to my ASA in my remote access VPN tunnel but

  can't get this to work.  what Miss me?

  remote access VPN subnet: 192.168.25.0

  LAN subnet: 192.168.1.0

  config is attached.  THX-

  Please enter the command

  Private access Managament

  and you will be able to telnet/ssh to the asa on this ip 192.168.1.253

• ODA IP ASA when you browse the web via remote access vpn

  Hi all

  I was wondering if it is possible to configure an ASA5510 in a way to allow users remote access VPN use external IP of the ASA when browsing the web. So what I'm looking for is a solution to hide my IP address and use the IP address of the ASA, when browsing.

  The firmware version of the ASA is 9.1 (6)

  Thanks in advance

  Hello

  What you want to achieve is calles u-turn.

  You must enable the feature allowed same-security-traffic intra-interface

  For the configuration of the asa, here's the Cisco documentation (I don't copy paste on the post):

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Thank you

  PS: Please do not forget to rate and score as good response if this solves your problem

• remote access VPN not connected - no access inside

  Hi, I have successfully configured remote access VPN router, it is connected, but no access to the inside, none of my ip addresses. I do not know SPLIT_ACL is ok and I've denied NATting them. For me, everything is ok. I did a lot in ASA, without anyproblem. Thanks for the comments.

  enable secret 5 $1$ y0AJ$ rhrjbrpe5NDiAyHGlfeNi.

  !

  AAA new-model

  !

  !

  AAA authentication login bcc_users local

  AAA authorization bcc_group LAN

  !

  crypto ISAKMP policy 10

  BA aes

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group ra_vpn_bcc

  key *.

  DNS 8.8.8.8

  bcc.local field

  pool vpn_pool

  ACL SPLIT_ACL

  Max-users 7

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

  tunnel mode

  !

  !

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  market arriere-route

  !

  !

  card crypto client CRYPTO_VPN of authentication list bcc_users

  card crypto isakmp authorization list bcc_group CRYPTO_VPN

  crypto card for the CRYPTO_VPN client configuration address respond

  map CRYPTO_VPN 10-isakmp ipsec crypto dynamic dynmap

  !

  !

  interface GigabitEthernet0/0/4

  IP address %.

  NAT outside IP

  auto negotiation

  BFD interval 50 50 5 min_rx multiplier

  card crypto CRYPTO_VPN

  !

  !

  IP local pool vpn_pool 172.31.255.0 172.31.255.250

  NAT extended IP access list

  deny ip 10.0.0.0 0.255.255.255 172.31.255.0 0.0.0.255

  deny ip 172.16.0.0 0.0.255.255 172.31.255.0 0.0.0.255

  deny ip 192.168.0.0 0.0.255.255 172.31.255.0 0.0.0.255

  IP address 172.16.0.0 allow 0.15.255.255 all

  IP 192.168.0.0 allow 0.0.255.255 everything

  IP 10.0.0.0 allow 0.255.255.255 everything

   

  SPLIT_ACL extended IP access list

  IP 10.0.0.0 allow 0.255.255.255 172.31.255.0 0.0.0.255

  IP address 172.16.0.0 allow 0.0.255.255 172.31.255.0 0.0.0.255

  IP 192.168.0.0 allow 0.0.255.255 172.31.255.0 0.0.0.255

  Take a look at the delivery.

  You do not have a route to the VPN pool on a nearby device.

• RV042G REMOTE ACCESS VPN Config Shrew Soft

  Hello

  I am trying to set up a VPN with IPSEC remote access, I have a router Cisco Small Business RV042G. I have managed to connect with the QuickVPN client using a previously created user. I also managed to establish a connection with the TheGreenBow pre-shared key customer with customer authentication by IP address or by mail. Exactly the same method I managed with the Shrew Soft VPN Client. I would like to Shrew Soft VPN with only establish a connection with the nicknames as if only the pre-shared key is used all over the world can access VPN set up on this computer.

  shrewsoftauthlocalidentity.PNG

  

  shrewsoftauthremoteidentity.PNG

  

  shrewsoftauthcredentials.PNG

  

  

  To sum it up can you tell me what configuration must be put to use the identification of the user only with the Shrew Soft VPN Client?

  Thank you very much.

  Hello

  Usually it is used Mutual PSK + XAuth, when you want to set up user and password, outside the pre-shared key authentication.

  But RV042G don't support XAuth, which means that you can not create a separate user/pass to connect VPN Shrew.

  Kind regards

  Bismuth

• Remote access VPN user permission

  Hi support them.

  It is a way for a remote access VPN to allow some users access to "Host A, B, C" and other users to access hosts D, E, F? Basically, we want to have some users have access at home to a few servers and other users have access only to some other servers. Is this possible without a GANYMEDE or some other device? Thank you guys!

  Hi John,.

  Yes, you can configure split tunneling to allow a specific group of users access to specific hosts.
  How this is achieved, it is that you create a connection profile different for different users, associate a policy group and the title of each group policy, you have a split tunnelling access-list defined with entries of different hosts.

  You must create 2 profiles of connection here and match them with 2-group policy allowing access to 2 differernt resources (they can be multiple as well)

  Here is a reference document: -.

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-next-generation-firewalls/100936-asa8x-split-tunnel-AnyConnect-config.html

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Configuring remote access VPN

  Hi all

  I need help with remote access vpn configuration. I want to some remote users who have access to the internet on their system to connect and access an application server in my seat social cisco vpn client user. I use Cisco 881. I am unable to use the SDM configuration because it seems that SDM is not supported by the router so I'm using command line. I'd appreciate any help I can get. Thank you.

  This is the configuration I have:

  VPNROUT #sho run
  Building configuration...

  Current configuration: 6832 bytes
  !
  ! Last configuration change at 10:50:45 UTC Saturday, May 30, 2015, by thomas
  version 15.2
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname VPNROUT
  !
  boot-start-marker
  boot-end-marker
  !
  !
  logging buffered 51200 warnings
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login userauthen1 local
  AAA authorization groupauthor1 LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  iomem 10 memory size
  !
  Crypto pki trustpoint TP-self-signed-1632305899
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1632305899
  revocation checking no
  rsakeypair TP-self-signed-1632305899
  !
  !
  TP-self-signed-1632305899 crypto pki certificate chain
  certificate self-signed 01
  3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
  69666963 31363332 33303538 6174652D 3939301E 170 3134 30313233 31323132
  33325A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36333233 65642D
  30353839 3930819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
  8100BC0C 341CD79B A38572CE 1F0F9A91 F96B133C A889B564 E8352034 1CF5EE4B
  B505616B 6014041B EC498C0A F6C5CD2B F5BF62DA BD6E1C44 0C7B9089 1FD0C6E5
  299CEB40 28CD3F3B ADE3468A B07AAA9F AC42F0A7 4087172A 33C4013D 9A50884D
  5778727E 53A4940E 6E622460 560C F597DD53 3B 261584 E45E8776 A848B73D 5252
  92 50203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355 D
  551 2304 18301680 14E85AD0 DEF133D8 E09516FD 0AA5FDAD E10EAB1A FA301D06
  03551D0E E85AD0DE 04160414 F133D8E0 9516FD0A A5FDADE1 0EAB1AFA 300 D 0609
  2A 864886 818100A 5 05050003 5B23ED5B 9A380E1F 467ABB03 BAB1070B F70D0101
  7A 218377 73089DC1 D32DA585 C5FD7ECE 0D000F96 7F3AB6CC 71509E8F 3F1C55AE
  E37536A3 1008FBF9 A29329D5 6F76DDC0 AA1C70AE 958AAE5D 32388BE4 2C1C6839
  0369 D 533 027B612C 8D199C35 C008FE00 F7E1DF62 9C73E603 85C3240A 63611D 93
  854A61E2 794F8EF5 DA535DCC B209DA
  quit smoking
  !
  !
  !
  no record of conflict ip dhcp
  DHCP excluded-address IP 10.10.10.1
  DHCP excluded-address IP 172.20.0.1 172.20.0.50
  !
  DHCP IP CCP-pool
  import all
  Network 10.10.10.0 255.255.255.248
  default router 10.10.10.1
  Rental 2 0
  !
  IP dhcp pool 1
  network 172.20.0.0 255.255.240.0
  domain meogl.net
  router by default - 172.20.0.1
  172.20.0.4 DNS server 41.79.4.11 4.2.2.2 8.8.8.8
  8 rental
  !
  !
  !
  no ip domain search
  IP domain name meogl.net
  name of the IP-server 172.20.0.4
  name of the IP-server 41.79.4.11
  IP-server names 4.2.2.2
  8.8.8.8 IP name-server
  IP cef
  No ipv6 cef
  !
  !
  license udi pid CISCO881-K9 sn FCZ1804C3SL
  !
  !
  username secret privilege 15 thomas 4 JXSizd1r/hMqPpGz94vKBb5somtpZLy03k50rJvHO6c
  username privilege 15 secret 4 mowe hlfv/rdDRCAeTUzRXbOIfdaKhJCl1onoGdaQeaQsAnw
  !
  !
  !
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  ISAKMP crypto client configuration group moweclients
  XXXXXXX key
  DNS 172.20.0.4
  meogl.net field
  pool mowepool
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac moweset
  tunnel mode
  !
  !
  !
  Dynmap crypto dynamic-map 1
  Set transform-set moweset
  market arriere-route
  !
  !
  card crypto client mowemap of authentication list userauthen1
  card crypto isakmp authorization list groupauthor1 mowemap
  client configuration address card crypto mowemap answer
  mowemap 1 card crypto ipsec-isakmp dynamic dynmap
  !
  !
  !
  !
  !
  interface Loopback0
  IP 172.30.30.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  !
  interface FastEthernet0
  no ip address
  !
  interface FastEthernet1
  no ip address
  !
  interface FastEthernet2
  switchport access vlan 100
  no ip address
  !
  interface FastEthernet3
  no ip address
  !
  interface FastEthernet4
  IP 41.7.8.13 255.255.255.252
  NAT outside IP
  IP virtual-reassembly in
  intellectual property policy map route VPN-CLIENT
  Shutdown
  automatic duplex
  automatic speed
  mowemap card crypto
  !
  interface Vlan1
  Description $ETH_LAN$
  IP 10.10.10.1 255.255.255.248
  IP tcp adjust-mss 1452
  !
  interface Vlan100
  IP 172.20.0.1 255.255.240.0
  IP nat inside
  IP virtual-reassembly in
  !
  local pool IP 192.168.1.1 mowepool 192.168.1.100
  IP forward-Protocol ND
  IP http server
  23 class IP http access
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source overload map route interface FastEthernet4 LAT
  IP route 0.0.0.0 0.0.0.0 41.7.8.12
  !
  access-list 23 allow 10.10.10.0 0.0.0.7
  access-list 23 allow 172.20.0.0 0.0.15.255
  access-list 100 permit ip 172.20.0.0 0.0.15.255 everything
  access-list 144 allow ip 192.168.1.0 0.0.0.255 any
  not run cdp
  !
  LAT route map permit 1
  corresponds to the IP 100
  IP 41.7.8.12 jump according to the value
  !
  route VPN-CLIENT map permit 1
  corresponds to the IP 144
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  access-class 23 in
  privilege level 15
  transport input telnet ssh
  line vty 5 15
  access-class 23 in
  privilege level 15
  transport input telnet ssh
  !
  !
  end

  Please the configuration above, give me the desired output.

  Thank you.

  Hello Thomas,.

  I'm glad to hear that you have found useful in the example configuration.

  I checked your configuration and everything seems ok with him, especially the statements of nat.

   ip local pool mowepool 192.168.1.1 192.168.1.100 access-list 100 deny ip 172.20.0.0 0.0.15.255 192.168.1.0 0.0.0.255 access-list 100 permit ip 172.20.0.0 0.0.15.255 any route-map LAT permit 1 match ip address 100 ip nat inside source route-map LAT interface FastEthernet4 overload interface Vlan100 ip address 172.20.0.1 255.255.240.0 ip nat inside ip virtual-reassembly in 

  Try to generate ICMP traffic behind your 100 VLANS to the client VPN in order to answer the following questions:

  -The router receives this traffic between VLAN100 unit?

  -The router is encrypt this traffic, after receiving the ICMP packet?

  #show crypto ipsec router its can help you with this question. Look for the program/decaps counters.

  -The same, but the other way around (from VPN client to device behind VLAN100) try to locate the problem.

  The following document explains more this crypto commands and debugs if necessary.

  http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation-IKE-protocols/5409-IPSec-debug-00.html#iosdbgs

• ASA remote access VPN cleaning

  Experts,

  I have about three or four remote access VPN that must be removed from my ASA. What is the best way to ensure that I remove all configurations of the ASA? Thank you. Best.

  Hi Thomas,

  You can run the command "clear configure vpn" to clear some vpn commands, if you do not have all the certificates or site to site, you can run the command "claire configure crypto" and remove any command associated crypto.

  Rate if helps.

  -Randy-

• PIX 515E and remote access VPN

  I use a PIX 515E with: ASDM Version: 5,0000 51 PIX Version: 8.0 (4) and configure it with remote access VPN.

  I would like to get an email every time that a user login (and or disconnection) to the VPN. Remote clients use the Cisco VPN Client.

  Any help is appreciated,

  Hello

  Here is a link to the email configuration when you log in to the ASA/PIX: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc7

  Then you can create a list of message to send the logs only for the connection/disconnection of the VPN user: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/63884-config-asa-00.html#anc18

  There is a wire that is linked here: https://supportforums.cisco.com/discussion/10798976/asa-email-logging-issue

• Remote access VPN fails after upgrading to 8.04

  Hello:

  Sorry if this has been posted, but I couldn't find it anywhere.

  After the upgrade of my 2 of my 5510 s to 8.04, my remote access VPN does not work. I can connect via Radius without problem. Once connected, I can't do anything on the network. When I try to telnet to any device, I get a white screen with no response. As it is to find the device but it does not. E-mail, intranet, nothing works. Seems to be time. I tried to upgrade to the latest version of Windows Client, still no go.

  Everyone knows this at all? Any help appreciated.

  TIA,

  Brad

  I saw the same problem after upgrading to 8.0.4. And it is caused by the "IP Compression" option enabled in group policy. After deactivation, it works. Cisco has just completed this bug recently:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsu26649

  Zhenning

• Road of default remote access VPN session

  ASA version 8.2.2

  How do you assign remote access VPN sessions a single default route?  Other than the default route assigned to ASA.  For example, my VPN ASA (handles vpn sessions), defaults to the Internet.  I wish that sessions VPN for remote access by default internal network first, then follow the default route to the Internet on another firewall.

  The SAA outside the IP address of the interface is a public.  Inside is a private 10.x.x.x.  VPN clients receive 172.17.x.x.

  Thank you

  After the command 'road' added keyword "tunnel".

  in the tunnel

  Specifies the route as the default gateway of tunnel for the VPN traffic.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/QR.html#wp1767323

• Remote access VPN pix version 8.0 (3)

  Hi all

  First of all, I would like to thank to all members of the forum who got help in several messages on the configuration of the pix 515.

  I am now configuring remote VPN access with radius authentication to my network, but I can't connect.

  I use the cisco vpn client 5.0.03.0560, I have also tested my pix radius (inside) server authentication and works very well.

  I already tried to retype the key of the cli, but I still can't remote access vpn to work.

  I also tried to create another remote vpn with another name and local authentication, but I have the same problem.

  I use 8.0 (3) version pix.

  Can someone help me

  I attach the log file of the cisco vpn client to help solve the problem, as well a configuration of the pix folder.

  Thank you very much in advance and I seek prior information.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/configuration/guide/vpnadd.html#wp999516

  [Pls RATE if HELP]

• Service of ASA module does on 6509-E support remote access VPN?

  I'm having a problem of configuration of remote access VPN (SSL, Anyconnect ect.) on the Module of ASA Service on 6509-E. It is even supported or I'm wasting my time trying to do something that won't work in a first place :) to work? Site-to-Site works without any problem.

  Technical info:

  6509-E current SUP 2 t SY 15.1 (2)

  Module of ASA - WS-SVC-ASA-SM1 running of the image - asa912-smp-k8 & asdm-712

  Licenses on ASA:

  Encryption--Activated

  3DES-AES-Encryption - enabled

  Thank you for the support.

  You run multiple context mode?

  If you are, access remote VPN only is not supported in this case:

  "Note several context mode only applies to the IKEv2 and IKEv1 site to another and applies not to the AnyConnect, clientless SSL VPN, the legacy Cisco VPN, native VPN client client of Apple, the VPN client from Microsoft or cTCP for IKEv1 IPsec."

  Reference.