Accidental UG of vista for win7 32 64

Similar Questions

• Windows Easy Transfer has not transferred any Windows Mail in Vista for Win7

  WET worked great for the migration of a Vista system to a Win7 system, except that my old stuff Windows Mail has not been transferred.  Is there an option simple copy/paste to move my email folders and content to Live Mail 2011?

  Hello

   
  See the link and check if it helps.
   
  Looking for Windows Mail?
  http://Windows.Microsoft.com/en-us/Windows7/looking-for-Windows-Mail
   
  E-mail
  http://Windows.Microsoft.com/en-us/Windows7/products/features/email

• Tecra S10 - 64 bit of Vista and Win7 64 bit driver question

  Hello

  I own a Tecra S10 and using Vista 64-bit operating system.
  Unfortunately Toshiba isn't supporting this version of the OS, because pilots proposed must be taken on different products that use the same hardware.

  Is anyone know wether Toshiba will start sharing the drivers for Vista 64 bit soon and whats on Win7?

  I think that Vista 64-bit drivers will run under Win7, but * when they officially released drivers for 64 bit Vista or Win7?

  Any info would be interesting.

  Thanks in advance.

  Hello!

  Normally it comes out drivers * after the release of the operating system. This means you have to wait a few months more I think
  But you think contacting Toshiba? Guys, you should know better than us users here. If you write an email or call, it takes only a few minutes!

  In addition, you should try the Vista 64 bit drivers. Most of them also works under Windows 7.
  And it s worth a try! ;)

  Good bye

• Satellite A350D - 20K - need Toshiba Recovery Disc Creator for Win7

  Guys I'm on Satellite A350D - 20K

  before or the original operating system from my laptop has been * Win Vista 32 bit * but I have choose changed from * Win7 64 bit *...
  I have already downloaded the other drivers from this site for my new OS, but it is not complete, in any case, this isn't a big deal.

  I just want to have an installer for * Toshiba Recovery Disc Creator for win7 64 bit *.
  before on my win7 32 bit there is a Toshiba Recovery Disc Creator ("but it doesn't have an installer on my backup CD I do not know why?")

  I looked for an installer here but the only thing I saw was for Win Vista, I tried to install it luckily it has been done successfully. He invited s to restart, so I restart my laptop so I tried to open the application, but there was an error message that invites it goes like this

  "NO HDD RECOVERY AREA!
  "The Toshiba Recovery disc can not be started."

  CONCERNS:

  * I want to ask you guys if you have an idea why it goes like that?
  * You have an idea where I can get the good installer for my new OS

  Please GUYS I NEED YOUR URGENT help BECAUSE I want TO SAVE FIRST MY drive HARD BEFORE I'll install new applications or before so I will use it.

  Thank you good guys...

  Hello

  Toshiba Recovery Disc Creator is a tool of Toshiba that created the recovery disk available on HARD drive recovery image.
  It s NOT support tool like Ghost, etc. that allows you to create an image of your operating system preinstalled.
  If the Toshiba Recovery files are not available on the HARD drive then the Toshiba Recovery Disc Creator will not work!

  Welcome them

• Qosmio F50 - 10K - Atheros Wifi & Touch pad drivers for Win7?

  Hello

  Could you please tell us when will we be able to download Win7 drivers for Atheros wifi cards & Touch pad devices? I check the box "Download drivers" daily, but the drivers for these two devices are not yet published...
  Also please provide some information about the BIOS - is there need for specific adaptations for better compatibility with Win7? You will soon release the update of BIOS for Win7?

  Thanks in advance for your answers!

  Check it please for WLAN driver Toshiba WLAN http://aps2.toshiba-tro.de/wlan/ Portal
  For the touchpad, you can try to use the Vista drivers. It works fine on my Win7 preinstalled Satellite A500.

• Satellite A110 - BIOS for Win7 and FN key features

  Hello
  I installed the new Windows 7 on my computer laptop toshiba a110 and surprisingly almost every device was dected and installed by win7. There is problem with PCMCIA driver for Vista solved the problem. But I always have problems with the function keys and of the extra buttons. Do you know which driver should I install to operate the keys Fn?
  Either way, I would ask if toshiba will be dedicated for toshiba satellite A110 Windows 7 drivers?

  I have another problem with the BIOS.
  I have seen that there is new bios update available for my laptop but I don't know which version should I use for WINDOWS 7?
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  I thought that if I have win7 OS independent bios update should be fine for me, but in this version, there is a warning, that 2, 00 - bios WIN is not dedicated for users of Vista. I've heard that Windows 7 is based on Vista OS so I don't completely now which version should I choose.

  Waiting for help
  Simon

  I assume that your Satellite A110 will not be supported for Win7. This means that you probably won't be able to find any driver, tool or utility designed for Win7.
  In my opinion, you should be happy that Win7 works and you have no serious problems with the physical property of work. Then you probably need to have lived without some specific features of Toshiba FN options, but most of them, you can use in different contexts.

  On the BIOS I say not a lot but, as far as I know, Toshiba will offer no special Win7 BIOS update for old models of laptops and if everything works well, you have to update BIOS at all.
  In any case for me, it makes sense to use the latest version of the BIOS that is designed for Vista OS.

• Download HP F19 Bios for win7

  I'll upgrade of processor T7100 to T8100 on my laptop HP 6910 P.

  The latest bios HP technical support Web - F19 - is only available for Windows XP systems,

  not for Vista or Win7?

  Björn

  Thanks-will try last updated bios for win2k - in safe mode...

  concerning

  Björn

• VB6 with DAQmx compatibility with Microsoft Vista and Win7?

  Hello

  I'm trying to figure out how what are my options for running my VB6 applications that use the API C of NOR-DAQmx with Vista or Win7.

  I have certain applications that we have maintained in VB6 (with Measurement Studio 6).  I programmed the software for traditional OR-DAQ hardware originally.  I suppose that I used for about 10 years or more.  About 2 years ago or if we needed to use our software with hardware recent DaqMX I've been able to use the API C OR-DAQmx for Visual Basic 6.0.  My application really support two hardware platforms simultaneously.  The person responsible for the project wanted to have 1 single application managed the two platforms (daqmx and inheritance).  So far, it's all great.

  If anyone knows what are my options if I want to use Windows Vista or Windows 7.  We are currently running this app on Windows XP.  I'm ready to upgrade my software if necessary although I have to spend to VB.net and Measurement Studio 7.1 (I currently have).  But if we were to happen tomorrow is there any compatilibility. I read that the traditional / legacy NOR-DAQ is not supported in Vista (Win7).  I googled and found there was a beta version which seemed to weakly in support of the legacy but did not support USB devices which is what I have (6020e (inheritance), SCXI (daqmx), 6259 (daqmx).)  I've heard that Windows 7 will have a virtualization system for XP applications that do not work natively under Win7, but for some reason, I doubt that the drivers and hardware will be run this way.

  Also, should there be differences between Vista and 7? I'm an XP user and computers I support many XP so I really have no experience with Vista.  I plan to install the Windows 7 RC to try some of this stuff.

  Thank you, David

  Use of our released traditional DAQ drivers is not supported on Vista systems, even running in virtual Windows XP mode. The driver works at a lower level which can emulate a virtual mode.

  However, we have a public beta version for a traditional DAQ driver that works for Vista. You can read about this version beta here

  -Abram

• HP Pavilion 15-p031st: I could not find the drivers for Win7

  Hello!

  I could not find the drivers for win7. Except these things, my computer works perfectly with win7.

  BCM43142A0: USB\VID_0A5C & PID_216C & REV_0112 (I think it's a bluetooth driver)

  Unknown device: ACPI\HPQ6007 (I don't know, but it is a driver of Wi - fi button)

  Driver Finder online from HP could not find those too. I don't want to use win8 on my laptop because ı couldn't figured out. So please help as soon as possible...

  Greetings from the Turkey

  Hello:

  You need this driver for the 6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart hard drive Protection) for the laptop models running a supported operating system. HP 3D Driveguard protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp67280.exe

• How to get pc-doctor for win7?

  How to get pc-doctor for win7?  Thank you.

  Hello

  The PC Doctor that HP had provided on some PCs using VISTA was a licensed software.  If you still are running VISTA then you can burn a bootable CD containing PC Doctor. A non - OEM for PC Doctor license is quite expensive in the last time that I had checked.

• Update XP, Vista and win7 PC with disk ssd

  Hello

  I have 3 computers with XP, Vista and Win7.

  I wonder if computers laptops XP and Vista (sata) will be able to get the most out of the SSD HDD?
  The sine qua non of not losing a lot of performance, is that the bios ahci mode available for hard disk?
  Is there something else?
  Some older computers, laptops and desktops may not use a SSD HDD?

  I have an external SATA enclosure for a disk hard 2.5 "regular who was not particularly to adapt to an SSD HDD. It fit? I'm wanting to copy the contents of all of the hard drive to the hard drives(xp,vista,win7) on the new discs, including the hidden partition which has the OS on it with something like Norton ghost or acronis true image software. Are there suggestions which we use, and which cable (what is a sata to usb cable?) do I need for the migration if I use a laptop computer to copy these disks?

  Does anyone have any suggestions of what SSD to use? I'm looking for a 120gig SATA 3 with faster speeds.

  Thanks in advance

  Hello

  3 SSD have more fast read and write times when they are installed in PCs that use the latest SATA 3 interface. You may be able to search online by using your favorite search engine to know the different manufacturers.

  SATA cables would be also faster to transfer the data.

  See: http://windows.microsoft.com/en-US/windows7/Install-or-remove-a-hard-disk-drive

• Accidentally installed windows vista 2 times

  Can Hi you help me please? the problem is that I tried to restart my laptop now, it was my first time doing that so I found 2 CD that came with my laptop. The problem is that I put in the wrong CD and accidentally installed Windows Vista again on the (d :)) thinking to myself it will be re - boot my laptop in the car.) Now I'm sure that in every computer/laptop, all files, programs and software be saved on the (c :)) drive, but now that I have installed Windows Vista again on the (:)) d car, everything is saved on disk (d :)).) () That I don't want to). Please can someone tell me how to remove this 2nd Vista Windows Vista so then I can start reusing my drive (C :). Please can someone me help... really urgent.)

  Hello Naeem237,

  Thank you for your message.  Looks like you have installed on your recovery partition.  Please see Andre post and follow her advice on the thread HERE regarding the suppression of the 2nd install.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Hello, I am looking for driver for card reader memory vgn-fz250e for win7 64-bit

  Hello, I'm looking for a driver for card reader memory vgn-fz250e for win7 64 bit, I downloaded all the driver on your Web site and try, buy does not work, can you tell me which one is right, thank you very much!

  Try this one from HP:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...

  Other people have said that the HP driver works fine with 64-bit Vista VAIO.  If it doesn't work no, just roll back the driver in Windows Device Manager.

• Be provided drivers for win7 for dv2804tx?

  My nb is dv2804tx using Windows Vista and I want to upgrade the system to Windows 7. But found no available driver for win7. So, be provided drivers for win7 for this model? Thanks for the reply.

  To do this you must contact the HP Support directly.

• Find the Audio driver for HP dc7600 convertible minitowers PC for Win7

  Dear all Member,

  I have two HP dc 7600 and computer in minitour convertible HP dc 7800 PCs, recently I upgraded the old OS win XP of them for the new OS Win 7, I'm looking for drivers for Win7 in here, but until now, I couldn't find the Audio driver for Win 7.

  Some audio that I found them on the web for HP to be compatible with Win7 drivers, but they are unsupported when I installed them on my computer.

  You help me by sending the right link to download the Audio drivers for Win7 on HP dc7600, dc7800?

  Thank you very much.

  Chinh_Ng.

  Hello:

  For the dc7600, the best thing to do is to go to the realtek website and download and install the latest driver for the audio.

  Accept the agreement. Download and install the driver either the 1st or the 2nd on the list depending on whether you have installed W7 32-bit or 64-bit.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  I have a dc7800 CMT and I used the audio driver from the support page and driver and it worked perfectly for me, so I can't help you there.

  I used the one on the link below.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3459240 & prodNameId = 3459243 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-75954-1