Accidentally blocked access to the local disk - how to unlock?

Similar Questions

• block access to the local asa firewall vpn accounts

  I'm looking for the local accounts on the firewall and would like to make sure that users who have local accounts for vpn do not have for the firewall itself through asdm, telnet, ssh to the management.

  Is the only aaa on the firewall command

  the ssh LOCAL console AAA authentication

  With this command, if I change the local account setting to 'NO ASDM, SSH, Telnet or access Console' (see attached screenshot) will that still allow users to vpn in and access the network because they have to take off but any what potential access to the firewall?

  Thank you

  Hello

  Yes, if you select the option "No., ASDM, SSH, TELNET or Console access" allows to block only the admin access to the firewall. Here's the equivalent CLI for this option:

  myASA(config-username) # type of service?

  the user mode options/controls:
  Admin user is authorized to access the configuration prompt.
  NAS-prompt user is allowed access to the exec prompt.
  remote user has access to the network.

  If you use this option you will be on the third option in the above list that is remote access. Users will have the option of VPN in but no admin (asdm, ssh, telnet or console)

  Thank you

  Waris Hussain.

• Change sharing permissions, now I can't access the local disk

  Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
  Thank you

  Hello

  I suggest you to follow the steps in the link given below and check if it helps.

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Let us know the status of the issue.

• all my data is all save on the local disk c, how to share the data with the other drive, local drive d.

  all my data records on the local disk c, how to share the data with the other drive, local drive d.

  Hi Jasonbichard,

  1. what type of drive is D? Is - this another partition on the same disk?

  2 Windows operating system you are using?

  You can change the location of the disk to save the data in the d: instead of C: and check if it helps.

  a. navigate to the location (username) C:\Users\.
  b. right click on the folder that you want to change the location, and then select Properties.
  c. click on the location tab and change the location to D: drive.

  d. click on apply and Ok.

• Access denied to the local disk (D)

  Hello
  I have a problem with windows 7. In fact, I changed the permissions on the local drive (D) to "total control has declined. I tried to go back to the 'authorized' by following the tutorial posted on your support site, but I am facing a tiring situation, since I have to repeat the process (right click--> Properties/Security /...) for each subfolder and the thousands of files in the folder. Is there a solution to this problem? If I install a new system that will overcome the problem?
  Please help me I'm stuck!

  I changed the permissions on the local disk (D) "total control has declined.

  Why would you do that?

  You will need to take ownership of files to repair the damage - see here:
  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• Problems downloading a file of muse for the first time. Museutils.js is not on the local disk on the file index.html.

  Hi all

  I hope someone can help because I'm a little desperate.

  I started to design a page with a muse of Qooqee model: SENSE.

  I worked for a month on this issue. When I was about to finish, I got a message that there is a new version of Muse to update. I did the update when I was still working in the design.

  When I finished the desktop version, I downloaded using the "upload to the ftp host" button. All fine until he has gave a "error on the index.html file.

  

  So, I was unable to complete the first uploaded to the online page.

  My husband, who knows a bit about coding, opened the index.html file, and we have seen a warning: MUSEUTILS. JS IS NOT ON THE LOCAL DISK.

  

  Reading questions similar to the forum that I can guess that the problem has been built with I started with the earlier version of the Muse and updated the Muse version in the workplace, when I finished the page.

  Now, the page is not alive because I am not able to download the file.

  I don't know if that's the problem, however. I downloaded a fresh sense of QooQee model and erase all content and pages name I will use them (he has added a few pages and I moved the contact page somewhere else on the site map). Then, publish the page Go Daddy and have the same problem. Error on the index.html file. For that I am lost again, because everything has been done with the same version of Muse and the latest model of sense (I don't know how they update the models).

  Can you please give an idea on how to solve the problem? What I have to redo the entire page?

  Thanks in advance, you are my last hope.

  Good to see that we can exclude a Muse for the functioning and the collection of production. The problem must lie in the specifics and/or requirements of GoDaddy, hosting provider. The Muse team is very aware of being a very popular hosting provider GoDaddy , so they want to learn all the occasional problems or quirks that might appear with Muse in combination with these suppliers. It might have to do with the current version of Muse, but it could also be a coincidence that GoDaddy has begun to change some things on their side as well. Or it could even be a Gremlin (colloquial term for a software bug temporary and inexplicable) blocking a circuit which seems to happen from time to time...

  Are you sure that you follow all the advice and guidelines in this FAQ: download an Adobe Muse of the site to a third-party hosting service ?

  Hang on!

• my windows Live ID has been blocked access to the vlsc site. What can I do?

  I tried to access the vlsc site, and I got a page saying that my account was blocked access to the site.

  WHA t I can do

  Your login status is invited or blocked because you are currently signed in with a Windows Live ID that is not associated with the Microsoft Partner Network.
   
  While you are connected as a guest, you will be able to access content available for public view. Links that display locked icons are contained premium for members of partner network, and you will not be able to view that content until you either you sign in with a Windows Live ID associated with the network of partners or register in the network of partners and then sign in with your newly associated Windows Live ID.

  You will need to check with the Volume Licensing Service Center:
  https://partner.Microsoft.com/us/40046574

  
  For more information about how to contact the VLSC, click below:
  https://partner.Microsoft.com/us/40031077
   
   
   
  Sincerely,

  Marilyn

• Semi-automatic updates of local disk - how?

  Hello!

  What I want to do should be fairly simple, but I have not found the solution quite yet. What I want is for a machine target - with no internet or slow internet - to be able to pull updates from a locally attached disk, but also the internet.

  At this point, I will say that I don't want to apply updates individually or in a batch. One is laborious, and the other is not selective. Here's how I want the updates to work:

  1. the target machine determines the updates to download / apply. Either he finds this information from the Microsoft Update site or catalog stored locally (wsusscn2.cab) updates.

  2 present updates on the local disk are copied and applied.

  3 not present updates on the local drive are downloaded as usual from Microsoft Update by using the internet connection of the machine.

  -*-

  After some googling I found a script that partially accomplishes my aim here:

  http://msdn.Microsoft.com/en-us/library/aa387290 (v = vs. 85) .aspx

  Simply, this analysis the wsusscn2.cab file and lists the updates that the machine will have to. It doesn't download or obtain it from a local disk. It is also a script, which is good, but more work I have to learn Windows scripting.

  Another suggested approach running WSUS on a laptop running Windows Server, or even running WSUS on a Windows virtual machine... the two methods seem too complicated for this seemingly simple task. And the two methods require a Windows Server license. Given that this is not intended to be used in the environment domain, but on some PCs to the home user, I'm not like buying Server 2008 ;)

  As I said, I'm sure this must have been done already. I know some 3rd party applications this offline update (now called WSUS offline update) t, for example, but don't wish to not use non-free software from unapproved sources. A MS application would be preferable.

  Thanks in advance for your help :)

  (Key words for google: offline, standalone, usb, sccm, sms itmu)

  Hi k9wazere,

  The question you have posted is related to scripts and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm not able to merge the partition not used to the local disk partition

  I'm using windows xp service pack 3 and I have deleted my partitions from disk 2, but im not able to merge the partition not used to the local disk partition, what should I do?

   
  Original title: HELP ASAP!

  Hi Joseph.

  Suggestion of PML in the thread below, can be very useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-do-i-merge-two-partitions-in-XP/d2a7fa28-b2dc-41F6-9cd3-2c2beb6c6865

• User duplicated on the Local disk folder

  Hello

  I was looking through the C: drive and found two user folders.  I went to the location of the folder of each and both were located on the Local disk and both had the same files folders and dates:

  Intel
  PerfLogs
  Program Files
  SwSetup
  Users
  WINDOWS

  I don't remember ever having seen two user folders.  Is it a normal thing?

  Thank you!

  M

  Hello

  1. how many accounts user are there on your computer?

  2. have you created a new user account?

  The files you mentioned are the same for all users.

  Please post the screenshot of the users folder that would help us helping you better.

  See the link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• Groups and permissions of the user is added to the local disk post-conversion?

  We currently have a security policy with our Windows servers requiring admins to remove unnecessary security groups and users on the local disks. Basically, the SYSTEM and administrators retain full control, but all other users and groups are deleted for security reasons. We find that during a P2V conversion/clone servers, security groups and users are added to the readers of these new virtual machines (see screenshots below):

  Security before and after conversion. Could this be a function of the sysprep post-conversion tasks that work?

  Until now, we thought that, apart from the usual physical changes inherent to a clone, security remains unchanged. We follow best practices for conversion of these machines (running this as a local administrator account, run this converter installed on the machine, by stopping services as much as possible and so on).

  You can compare it to a system where you don't resize volumes, but all other factors are the same?

  If you reduce the size of a hard disk volume during the conversion, it will make a copy of file by file from the source to the destination devices.  We may have to add permissions for the conversion process, but I don't know if it is real.

  If you maintain or increase the size of the hard drive, it is a clone of block level which should be a bit-by-bit copy the source system.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Edge code will not be installed, it keep asking to be installed on the local disk.

  I'm on Windows7 Home Premium, the Dungeon of the installer asks me to install on the local disk, which I am installing to the local drive C by default.

  

  Can anyone help? He comes to inspect the edge too

  Hi Nick,

  We had a few reports of this problem with the media as well.  You can try these workaround solutions and let us know how it goes?

  1. Make sure that you do not have other installers at the same time (see the "msiexec.exe" Task Manager)
  2. Make sure you have enough free hard disk space
  3. Restart your computer (installers are sometimes tricky if the installer from some other app ran earlier but is still saving a few tasks until the next reboot).
  4. Run the installer as admin, as follows:
     1. Click with the right button on the "Command Prompt" application and choose Run as administrator
     2. Use cd to navigate to the folder where you downloaded the .msi installation file
     3. Run the following: msiexec /i «2.msi Adobe Edge Code Preview»

  -Peter

• Sections is not on the local disk and the menu is not displayed correctly

  I get the sections is not

  on the local disk. When I click on the link 'Get' I get is not in a defined site... (PS CS5)

  http://www.dallasguesthouseinn.com/index.htm

  @charset "UTF-8";

  / * Sections - version 0.6 - Pre - Release Spry 1.6.1 * /.

  / * Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */

  /*******************************************************************************

  The AVAILABLE INFORMATION: Describes the box model, positioning, the order

  *******************************************************************************/

  / * The outermost container for the menu bar, an area of width auto without margin or padding * /.
  UL. MenuBarHorizontal
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 100%;
  cursor: default;
  Width: auto;
  }
  / The menu bar value active with this class, currently the definition of z-index to accommodate IE rendering bugs: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html * /.
  UL. MenuBarActive
  {
  z-index: 1000;
  }
  / * Menu item containers, position of children relative to this container and are a fixed width * /.
  UL. MenuBarHorizontal li
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  list-style: none;
  do-size: 100%;
  position: relative;
  text-align: left;
  cursor: pointer;
  Width: 20%;
  float: left;
  }
  / * Submenus should appear under their parent (top: 0) with a higher z-index, but they are first the left side of the screen (-1000em) * /.
  UL. MenuBarHorizontal ul
  {
  margin: 0;
  padding: 0;
  list-style-type: none;
  do-size: 100%;
  z index: 1020;
  cursor: default;
  Width: 8.2em;
  position: absolute;
  left:-1000em;
  }
  / * Submenu that shows with the designation of the class MenuBarSubmenuVisible, we put the car left so it happens on the screen below its parent menu item * /.
  UL. MenuBarHorizontal ul. MenuBarSubmenuVisible
  {
  left: auto;
  }
  / * Container of menu items are same fixed width parent * /.
  UL. MenuBarHorizontal ul li
  {
  Width: 8.2em;
  list-style-type: none;
  list-style: none;
  }
  / * Submenus should appear slightly overlapping to the right (95%) and upward (-5%) * /.
  UL. MenuBarHorizontal ul ul
  {
  position: absolute;
  margin:-5% 0 0 95%;
  }
  / * Submenu that shows with the designation of the class MenuBarSubmenuVisible, we have left to 0, it is on the screen * /.
  UL. MenuBarHorizontal ul. MenuBarSubmenuVisible ul. MenuBarSubmenuVisible
  {
  left: auto;
  top: 0;
  }

  /*******************************************************************************

  INFORMATION DESIGN: Describes the set of colors, borders, fonts

  *******************************************************************************/

  / * Submenu containers have borders on all sides * /.
  UL. MenuBarHorizontal ul
  {
  border: 1px solid #CCC;
  }
  / * Menu items are a light grey block with padding and no text decoration * /.
  UL. MenuBarHorizontal a
  {
  display: block;
  cursor: pointer;
  background-color: #EEE;
  Padding: 0.5em 0.75em;
  Color: #333;
  text-decoration: none;
  }
  / Components menu that have mouse over or focus have a blue background and white text * /.
  UL. MenuBarHorizontal a: hover, ul. MenuBarHorizontal a: focus
  {
  background-color: # 33;
  color: #FFF;
  }
  / * Menu items that are opened with the submenus are on MenuBarItemHover with a blue background and white text * /.
  UL. MenuBarHorizontal a.MenuBarItemHover, ul. MenuBarHorizontal a.MenuBarItemSubmenuHover, ul. MenuBarHorizontal a.MenuBarSubmenuVisible
  {
  background-color: # 33;
  color: #FFF;
  }

  /*******************************************************************************

  Submenu INDICATION: styles if there is a submenu in a given category

  *******************************************************************************/

  / * Menu items that have a submenu have the MenuBarItemSubmenu class designation and are set to use a positioned background the far left (95%) and vertically centered image (50%) * /.
  UL. MenuBarHorizontal a.MenuBarItemSubmenu
  {
  background-image: url (SpryMenuBarDown.gif);
  background-repeat: no-repeat;
  background-position: 50 95%;
  }
  / * Menu items that have a submenu have the MenuBarItemSubmenu class designation and are set to use a positioned background the far left (95%) and vertically centered image (50%) * /.
  UL. MenuBarHorizontal ul a.MenuBarItemSubmenu
  {
  background-image: url (SpryMenuBarRight.gif);
  background-repeat: no-repeat;
  background-position: 50 95%;
  }
  / * Menu items that are opened with the submenus have the designation of the MenuBarItemSubmenuHover class and are set to use a background image "hover" positioned on the far left (95%) and centered vertically (50%) * /.
  UL. MenuBarHorizontal a.MenuBarItemSubmenuHover
  {
  background-image: url (SpryMenuBarDownHover.gif);
  background-repeat: no-repeat;
  background-position: 50 95%;
  }
  / * Menu items that are opened with the submenus have the designation of the MenuBarItemSubmenuHover class and are set to use a background image "hover" positioned on the far left (95%) and centered vertically (50%) * /.
  UL. MenuBarHorizontal ul a.MenuBarItemSubmenuHover
  {
  background-image: url (SpryMenuBarRightHover.gif);
  background-repeat: no-repeat;
  background-position: 50 95%;
  }

  /*******************************************************************************

  BROWSER HACKS: hacks below should not be changed, unless you are an expert

  *******************************************************************************/

  / * HACK FOR IE: to ensure that sub menus show above form controls, underpin us each submenu with an iframe * /.
  UL. MenuBarHorizontal iframe
  {
  position: absolute;
  z index: 1010;
  Filter:alpha(opacity:0.1);
  }
  / * HACK FOR IE: to stabilize the appearance of the menu items. the slash in the float is to keep IE 5.0 analysis * /.
  @media screen, projection
  {
  UL. MenuBarHorizontal li. MenuBarItemIE
  {
  display: inline;
  f\loat: left;
  Background: #FFF;
  }
  }

  Dreamweaver code:

  < ul id = "MenuBar1" class = "MenuBarHorizontal" >
  < li > < a href = "index.htm" > accommodation rates / < /a > < /li > ""
  < li > < a href = "Reservation.htm" > book < /a > < /li > ""
  < li > < a href = "Amenities.htm" > equipment < /a > < /li > ""
  < li > < a href = "Location.htm" > location < /a > < /li > ""
  < li > < a href = "Attractions.htm" > Attractions and activities < /a > < /li > ""
  < /ul >

  Hello

  looking for your source code, I see this:

  
  file:///C|/users/public/documents/SpryAssets/SpryMenuBarHorizontal.CSS"rel ="stylesheet ".

  This means that your DW 'think' your *.css and *.js your are on your hard drive. You must remove the wrong way for example:

  
  

  or

  
  

  If your SpryAssets directory is nested a little bit.

  Hans-Günter

• Airport utility in windows 10 detect but wireless internet does not detect the hard disk, how to do?

  Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.

  What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?

  What model number is the most convenient airport?

  Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.

  In addition, not all drives are recognized.

  The internal drive of the TC must be recognized, but there could be problems as well according to the age.

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!