accidentally disabled computer speakers.

Similar Questions

• Pavilion 500-056: accidentally disabled my speakers! sound/no

  So here's the scoop. My computer (HP Pavilion 500-056) had been broken for a year now, and I finally fixed and reinstalled windows 10. Everything worked well and I was very happy until I realized that I had no sound coming out of my speakers. Through my process of DIY autour, check the cables and the entry and other output sockets, there seemed to be no problem. I went in the sound mixer, and there, I accidentally disabled my speakers, so they don't pop up on the list more! I have no idea how to turn them on now, and I still have no idea how fix my sound. If someone could help pronto, I would be very happy! Thank you!

  Hello

  If they were just disabled, you can re-enable the as follows.

  Do a right-click the speaker icon in the taskbar and select "playback devices".

  In the next window, right-click on an empty area and enter a checkmark against "Show disabled devices".

  If your speakers are now listed, right-click them, then select activate.

  Kind regards

  DP - K

• I accidentally disabled my speakers and do not know how to activate them again.

  I went the sound settings because my sound stopped working and I accidentally clicked the button disable to the speakers. Now I don't know how to enable them again so I can get the sound.

  I went the sound settings because my sound stopped working and I accidentally clicked the button disable to the speakers. Now I don't know how to enable them again so I can get the sound.

  I use Vista Home Premium SP2. Hoping that the following steps are apllicable to your version...
  Taskbar, the Notification area > right-click on the Volume icon > playback devices > read tab > scroll to find speakers/headphones, highlight > properties > at the bottom, use of the device. Click on the pointer in order touse this device (enabled) > OK.

  t-4-2

• Accidentally disabled Windows Vista by default speakers?

  Well the little volume icon that appears in the taskbar was not visible so I did:
  Start > Control Panel > Sound > playback.

  Then I thought that if I turned off the speakers that their licence it would bring back the icon... then once I clicked on disable the "speaker" icon has disappeared from the Read tab, and now I have no sound on my laptop.

  How can I get the rear speakers on my laptop so I can get her again?

  I use a HP G60 - 125NR Notebook PC with Windows Vista Service Pack 1.

  PLEASE HELP ME!

  Note: This is the program of speaker I accidentally disabled:

  Conexant high definition SmartAudio 221

  Also, I went into the Device Manager and I still installed on my computer, it's just that when I click it, it says 0 just next to "places". I just need help to return to the tab 'Read'

  PLEASE PLEASE PLEASE HELP ME! My parents will kill me if I screw up anything here!

  Hey O Rio,

  Thanks for posting answers.microsoft.com

  One thing you can try to start Orb / Control Panel / Sound / the reading tab right click on an empty spot on the window and select Show all disabled devices.  This should show this audio device listed again.  You should be able to right-click on it from there, then select Enable.

  Let us know if it gets you to the top and run again.

  Thanks for posting on our community forum! Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I accidentally disabled my internal speakers, how re - activate them?

  Help!

  I have a HP Pavilion dv6700 and I accidentally disabled my internal speakers, how re - activate them?

  Do a right-click the sound icon in the Notification area
  of your taskbar... choose the different options...
  and uncheck the mute box.

  And the following items may be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

  How to disable the internal speakers on an HP Compaq
  http://www.ehow.com/how_7177045_disable-internal-speakers-HP-Compaq.html
  (may also work to "Allow" the speakers)

• accidentally disabled enhanced usb controller now can not log on to windows

  I accidentally disabled thr enhanced usb host controller.now no usb ports don't work so I can't open the computor to reactivate the controller

  Hello

  Start the computer in safe mode and start the desktop.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in SafeMode (Windows 7)

  Then perform the following steps:

  A: right click on my computer, and then select Properties.

  B: then go to Manager of devices and then, on the Action menu, click scan for hardware changes

  Hope that helps.

• HP K5H28AA #ABL: accidentally disable all usb port

  Looking to change the settings in my BIOS I accidentally disable all USB ports. Now I can't use the keyboard and mouse. I want to know if there is a way to reset to the factory settings, the computer from the motherboard

  Hello

  Before you try this, unplug the devices all attached, turn off the PC and remove the power plug.

  There should be a jumper on the Board that you can use to remove the settings current CMOS, located just above the cmos battery - move the jumper to the clear position for 30 seconds and then bring him back - see the image at the link below.

  http://support.HP.com/us-en/product/HP-110-500-desktop-PC-series/7450567/model/7748407/document/c04439095

  Kind regards

  DP - K

• HP Touchsmart: Touch screen accidentally disabled decide and PC not install mouse

  My HP Touchsmart was installing all new devices, the slice would always fail. Try to fix it I went to the Device Manager and accidentally disabled the touch screen device. Now I can't click the screen anyway, so I was wondering if there is that a way to factory reset the computer without a connection inside or by clicking on the screen or to activate the touch screen (once again without being able to click on the screen). If you would like more information for a solution please ask. So basically no mouse, touchscreen disabled and can not use my computer! Thank you.

  Yes, you can reset the computer without going through Windows, but I advise to use a mouse to touch before you do. Also try to start in sate mode and allowing the touch function.

  See suite for the reset:

  http://support.HP.com/us-en/document/c01867418

  http://support.HP.com/us-en/document/c03546603

  Docs also applies to Vista.

• I accidentally disabled my mouse/touchpad? (on another laptop... Sony Vaio) I can't move my cursor. How it back on?

  I accidentally disabled my mouse/touchpad?  (on another laptop... Sony Vaio) I can't move my cursor.  How it back on?

  Hi Jakes,

  Please go to the Microsoft Community Forums.
  Description of the question, we understand that you are not able to move the cursor with touchpad.
  Let us move forward and help the issue.

  If you could answer a few questions that would help us resolve this problem:

  "1. What do you mean by" ","I accidentally disabled my mouse/touchpad?

  2. where did you make changes in the computer before the show?

   

  We invite you to check out the link and follow the steps in the article:

  What if the touchpad is not working properly, works without touching, functions intermittently or erratically or is completely insensitive?
  http://www.Sony.co.in/support/FAQ/409262

   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Accidentally disabled account administrator Windows 8.

  Hi all

  I have a problem that "accidentally disabled 8 Administrator Windows account. The case is now that I only have one Standard account here that I can connect with this account, but due to the STANDARD ACCOUNT, I can not activate the ACCOUNT ADMINISTRATOR.

  I know the NAME Admin and PASSWORD. But turning off the Admin account, I don't find any Option on SIGN IN .

  IF anyone has the answer, please answer...

  Thank you

  Prem

  The built-in Administrator account system is supposed to be disabled.  If you have administrator rights, create your own account under another name (not "Administrator") and give him those rights.

  The built-in Administrator account system is automatically activated when you start in safe mode.  So follow these steps:

  1. Press the Windows key + i to display the settings.
  2. Click the Power Options icon., then hold down the SHIFT key while you click the restart option.  Give him a few moments.
  3. On the first screen, select Troubleshooting. then click on Advanced Options.
  4. On the next screen, select Start Settings , and then click the restart button.
  5. On the next screen, press the number 4 key.  The computer starts in Safe Mode.
  6. Click on the arrow icon, and then select the administrator account.
  7. After the Safe Mode boot, open Control Panel / user accounts.
  8. Select Manage another account , and then select the account you want to switch to an administrator account. Select change the account Type. Select administrator , and click the button change the account type .
  9. Exit control panel and restart the computer.
  10. Log on with the account that you changed to an administrator account.

  Let us know if you have any other questions.

• I was on Redbox and accidentally disabled the part location function. How to re - activate this?

  I was on the site of Redbox and clicked on DVD to find nearby and accidentally disabled the part location function. Anyone know how I can reactivate this function?

  You can also check specific permission settings by using the permissions of the Page Info dialog Committee. While on the site, you can call this using one of these:

  • Right click and select View Page Info > permissions
  • (menu bar) Menu Tools > Page Info > permissions
  • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

  Scroll down and look for "access your location. If it is set to block and you want to enable it, you can make the change. (If necessary, uncheck the box to activate specific use default settings.)

• I accidentally disabled remember passwords. How to re-enable?

  I accidentally disabled remember password for sites and so now I have to retype the password every time I have something connexiona that I use on a daily basis. How to activate passwords? It won't let me check box.

  Make sure that you are not Firefox running in permanent private browsing mode (don't remember history).

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > privacy > Firefox will be: "use the custom settings for history".
  • : Uncheck the [] "always use the private browsing mode.

• I have an iPad 2 Air myPhone does not appear at the bottom of the screen on FaceTime, when call is received. Tried typing the wallpaper nothing.  Could I have accidentally disabled something?  Any suggestion would be appreciated.

  I have an air of the iPad 2. I can't answer my incoming calls on facetime no phone on the screen.  I tried to hit the bottom of the screen and nothing happened.  could I have accidentally disabled somethng? Any help would be appreciated.

  Hello Freckles60,

  After reviewing your post, it looks like you aren't able to answer calls FaceTime on iPad. I recommend you to read this article, it may be able to help solve the problem.

  Get help if you cannot make or receive calls FaceTime - Apple Support

  Thank you for using communities of Apple Support.
  Good day.

• Play music from Sansa Fuze my computer speakers?

  Can I listen to music on my Sansa Fuze MP3 player in my computer speakers?

  If I can, how can I connect the "rocket" on my computer or on my speakers?

  Connect the "rocket" to your computer with the USB cable. Looking for the "rocket" as a disc or two discs (one for unity, for card) in Windows Explorer (computer or workstation). Discover music. Assuming that you have a drive in your computer - such as Windows Media Player or Winamp or iTunes - you should be able to click on a file and read it.

• How to play a sound through computer speakers when the HDMI cable is used as I can't get the audio content

  I have a desktop monitor and an Alienware Alpha I bought recently, which of course is not a speaker. I use a HDMI cable to get the video of the Alpha on the screen, but when I plug the HDMI on my monitor I can not any audio to the fate of the computer speakers. In the Alpha settings, when I try to switch the audio in HDMI mode, it is said that the HDMI is not connected or incorrectly connected. Any help is appreciated. Thank you.

  I'm not quite familiar with the Alpha console, so I can only suggest to visit their support page where you can chat with an expert.

  I hope that you can solve your problem.