Accidentally set by default on the sound settings

Similar Questions

• Sound on my laptop is not as strong that used to be, all the sound settings are set to high

  Hi my laptop is a hp g6 on windows 7 64 bit.

  My problem is that my volume seems not to be so strong that used to be, all the settings of the machine are set to full volume. the only thing I can think is the software I have installed all the latest drivers can have down loaded a wrong?

  concerning

  DigitalKen

  P/S, please help it's driving me crazy, lol

  Hello

  One thing that may help is the following: If this option is available depends on the IDT pilot.

  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Sound problems on computer, cannot change the sound settings

  I had a long-standing problem in the audio settings of the Control Panel on Windows 7 where I can't change settings, configure anything or especially toggle of the devices. The options are there, but they have no effect when selected. Recently, I tried to connect my laptop to a TV, and as I could not set as the default audio device, I finally decided to try to fix things. I deleted and reinstalled the software Realtek my laptop and everything he has done is completely turn off my speakers, and all attempts to reactivate failed them. The unit displays in the control panel as a default active device, but claims of the taskbar that there are no speakers is connected, and if I click to set up the Realtek Audio, I have the same situation that before where absolutely nothing is happening.

  I tried troubleshooting sound problems, and all I get is the statement that an audio device is disabled, no attempt to fix or any option to enable. Apart from a system restore, that in general, I try to avoid, I feel that I have tried everything I can think of to fix this and only managed to make it worse. No help available would be appreciated to receive my laptop back to a functioning State.

  Model is a fickle Dell XPS L501X, if this is any help.

  I tried both of these methods several times without success, but since I found a result to this problem online. (Here: http://www.techsupportforum.com/forums/f217/solved-no-sound-the-unsolvable-problem-take-the-challenge-594113.html)

  I will stick also the solution here should someone stumbles on this page in the future trying to solve the same problem:

  Hi, go to start search and type cmd search will return the click right on cmd.exe and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Thanks for the help though, Yann!

• Clueless users accidentally restore their machines to the factory settings. How is that possible?

  I had one up to four cases where users have restored their machines to the factory settings. These users know nothing about computers and appear to be shocked as much as me on the fact that it has been restored. By default, all windows restore features are disabled by group policy which covers everyone. This means that they are using the Dell restore feature on their machines and unknowingly restore their systems. It only happens on newer Dell computers that we began to receive that comes with Windows 7.

  The last of them was the straw that broke the camels back. She said she kept tripping his power strip that caused here system constantly crash. I don't know who got the windows of catering for here to push blindly. She does not deny that she does nothing wrong and now trying to blame us (IT Dept) for the system being reset.

  Is it possible that the System Restore automatically after constant incidents or the user must press a button to get there? Questions that you need to restore, I see that there may be a restoration to a simple pressure to default settings. Or am I wrong?

  I found as follows to disable the system restore feature Dell and will apply to all new machines. I searched for examples of what happens to others but have not turned to the top of any "accidental restores.

  wesodo,

  System Restore should not be the problem, something has caused the shutdown of the system. Try to run full diagnostics, press F12 on startup and report to the back of any error message.

  Since you are the it Department, maybe delete the original image, given that you should have drives for the operating system for each system. If no disk were made, the attempt to read...

  Windows 7 - IMPORTANT Windows 7 to create backup discs

  I guess that when the system crashed, he triggered the problem with starting the system. The person should have come to you at this moment there, but didn't. Then they tried to startup repair, when they were invited, then it did not work, then, you are prompted to restore the original image system. If the original image is deleted, then they will have to come to you for help.

  Rick

• Satellite P300-190 - can't find the stereo mix in the sound settings

  Hello

  Maybe this question is posted before, but I can't seem to turn on the stereo mix option in my sound settings.
  It simply isn't there.

  Does anyone know how to fix this? Or is it not possible.

  Are you sure that this option should be available somewhere?
  All the settings of the sound your laptop are placed either in sound properties the audio presets in the Panel.
  As far as I know that s all.

  Has your laptop factory settings?
  Can you please tell us what you want to do exactly with your laptop?

• < f: view > tag is not set by default under the < jsp:root > tag of the root while creating .jspx in jDeveloper 11 g Release 1

  Hi all

  I am a beginner for Jdeveloper and ADF, I installed Oracle XE and Jdeveloper11g R1 in practice.

  I created the application, under the model, project Viewcontroler, created components BC and made mapping.

  Now created new page and tried to expose VO (from data control) on the page, immediately it's end with the error message saying "invalid parent for the element af:document element.

  I found that the problem with the tag < f: view > isn't there (not defaulted) under the tag root, by go - ogle.

  My question is why < f: view > tag is not set by default when creating the .jspx page.

  is there any work around to avoid this problem, because every time I can't add this tag manually to the new page?

  Thank you

  Aurore

  You are created JSP, not the a jsf page.

  Here's what you'll need:

  

• Can I create by default of the sequence settings?

  Hello

  It is possible to create a default value established for new sequences instead of having to set up manually.

  For example, I love my deadlines to be developed entirely with display set to display all the images etc.

  It would be great if there was a way to always open a new sequence in this way.

  Brian

  What I did, for some here, the 'standard' editing work is to create an empty project with set of sequences, with just the titles, stores, etc., I like and then save this provision as a 'model '. I have just open one of these templates and make a Save_As for the new project I'm starting immediately. I have also these PRPROJ (project) files hidden from the outside, in case I forgot the step Save_As. I just import the unique strengths, then change now. Now, not every aspect of the screen will be exactly as I could the love, but 95% of the work is done for me.

  Good luck

  Hunt

• DROID? : when on a phone call set by default to the dial pad?

  After I answered a call or phoned, I want my phone by default to the dial pad. Is there a way to do this?

  > Is there a way to do this?

  Yes.

  The default is for the phone to take you to your call log screen when you end a call.

  But you can install an application called on the Marketplace:

  NO CALL LOG

  You can change this redirect to anything you want.

  I put it to do exactly what you want to do: when I end a call, the phone returns to the dial pad display.

  -michael

• How to edit about: config to set by default on the desktop

  I use the Sony Xperia Z and Firefox for Android tablet. On a screen 10 "I'd rather see the desktop version of websites (always hated the web version, even on a small phone screen). I set the preference on the desktop by checking the box in the menu > Office of the application. But firefox always unticks this box every time the page is refreshed, a new page opens, opens a new tab or a new session begins. When shopping on eBay, for example, I check the box, connect on the desktop page, are sent to the mobile version, click on the box, refresh, back to the mobile version, manually enter the url for ebay desktop, get the mobile version. This happens on all websites. I might ask to office but I have mobile site each time. Makes me crazy! I need to set default values by typing about: config. Can someone tell me what the Protocol allows to set the default value AND ensure that it is recalled whenever I use firefox.

  As a matter of general interest, someone knows what is the cause? Whatever it is, it does not to my other customizations. For example, I deleted all the provided search engines and don't use StartPage and DuckDuckGo. And I added the ghostery and bluhell modules that work very well also. Thanks for your help.

  Use the default extension Office. https://addons.Mozilla.org/en-us/Android/addon/desktop-by-default/?src=SS

• I have no sound on my PC (with the exception of BEEEEEEEPS!). I checked under the hardware profile and all audio devices work but when I go in the sound settings it says there is no device installed.

  I have a HP Pavillion PC that I am running Windows XP Home Edition with Service Pack 2 on it.

  In the device section in the Control Panel, it says that all audio devices are working properly.  I even went to Microsoft Help on each one and there is no solution.

  When I go to Sound Devices, once again in the Control Panel, I see a message on each tab indicating that no device is installed.

  Other noise problem, I have no other problems.

  Help, please!

  Hello Sonier,

  Thank you for your message.  Do you know what type of sound card you have?
  Click 'Start' > right click on 'My computer' > click 'manage '.
  Click on Device Manager.
  In the right pane, click the (+) sign next to sound, video...
  Underneath, you should see your sound card.
  With this information you can go to the manufacturer website and download/install the latest driver for your card.
  Please let us know if this information was or was not useful for getting your problem be resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Set by default to the value of another text field

  I imported a several page PDF in LiveCycle Designer.  I place a text field on each page of the PDF file.  I want the user can click in the text field on the first page and type its value.  Then I want to fill in any other fields of text on other pages.  How do I put the default value of the other fields to make this work?

  You can bind the fields in the object > tab link. Simply, name them all the same thing and change the global default binding.

• Set by default in the management commands 11.5.10.2

  Hello
  
  I found my error in 790103.1.
  
  
  I ordered and I want copy this sales order and change the type of command to return. In the standard copy function does not copy point FAB. That's why I created the procedure.
  
  create or replace package xx_lp1 is
  
  function xx_get_fob (p_database_object_name IN VARCHAR2,
  p_attribute_code IN VARCHAR2) RETURN VARCHAR2;
  end xx_lp1;
  
  create or replace package body is xx_lp1
  function xx_get_fob (p_database_object_name IN VARCHAR2,
  p_attribute_code IN VARCHAR2) RETURN VARCHAR2 IS
  p_fob varchar2 (100): = NULL;
  p_header_rec OE_AK_ORDER_HEADERS_V % ROWTYPE;
  BEGIN
  
  p_header_rec: = ONT_Header_Def_Hdlr.g_record;
  
  Select FOB. LOOKUP_CODE
  
  in p_fob
  of oe_order_headers_all volume.
  oe_order_headers_all ohas,
  Fab FND_LOOKUP_VALUES_VL
  where ohar.source_document_id = ohas.header_id
  and Fab. LOOKUP_CODE = ohas.fob_point_code
  and ohar.order_number = p_header_rec.order_number;
  -Select "04FCA" in the double p_fob;
  
  If p_fob is null then
  Returns a null value.
  end if;
  
  If p_header_rec.order_number is null then
  Returns a null value.
  end if;
  RETURN p_fob;
  
  EXCEPTION
  WHILE OTHERS THEN
  Returns a null value.
  END;
  
  end xx_lp1;
  
  Default configuration FOB Point.
  I've added new type default 'always' condition and source attribut1 PL/SQL API and xx_lp1.xx_get_fob OE_AK_ORDER_HEADERS_V.
  
  Procedure always goes to others.
  
  Could someone give me some advice?
  
  Kind regards
  Luko

  Hello

  I found my error in 790103.1

  Thanks for sharing the solution.

  If it is no longer a problem, please mark this thread as answered for others he can view later.

  Thank you
  Hussein

• How can I set my privacy and the security settings to 'medium '. The library of Congress required for online presentations.

  I don't see all the levels in the tabs of the privacy and security in the preferences.

  Hello, there is no "security levels" in firefox - this review is probably suitable for internet explore only...

• Muse of update - pinning of items is set by default to the widget and impossible to disable

  Using the Widget

  Recommended news - Compositions-

  I moved 3 triggers above the target zone for better circulation.  Abobe Muse last updated: added a new option for pinning and triggers are defined on a left defect that cannot be disabled.

  When I download all three 3 triggers are moving to the left, and on top of the other.

  You will need to fix this ASAP...

  Pin the foot of page

  Workaround is to not pin down page more that corrects this problem.

  Composition - recommended News widget is now broken through their new options of PIN.

  Composition - Blank still allows triggers to be placed anywhere on the page...

• How can I change the network settings and air play setting up the itunes which is running on my laptop (windows 10)

  A few weeks ago, I was streaming of photos to my TV using my apple TV. Now, whenever I try to play music in my laptop itunes I get the error message "the airplay APPLETV device is not available," he goes on to say "Please check your airtime... configuration and network settings. "I searched for days for these parameters.

  Now the itunes on my laptop has no audio data.

  The only way I can hear the track I'm playing, is to select the option at the foot of the error message that says "use this computer for now" - this gets quite annoying after awhile!

  any suggestions?

  Thank you.

  Hello [email protected],

  I understand that you encounter some problems with the sound settings on your PC after using a home since iTunes for Windows sharing.   The resources below has some basic for home sharing troubleshooting. Specifically, I would say the software updates, cycling the power to the modem/router and check the sound settings in Control Panel to do the internal speakers are of course selected.

  Get help with sharing at home

  Where is the control panel?

  Take care.