Accountant of the window 7 with customer FSHost

Similar Questions

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• Can you please tell me where to locate the Windows Explorer with Windows Vista?

  Can you please tell me where to locate the Windows Explorer with Windows Vista?

  Thank you for your sincere help.

  Start | All programs | Accessories | Windows Explorer. Or, just use the Windows key and the E key.

• Add the windows firewall with the security log for windows 2008 Event Viewer

  Hi all

  I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.

  As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.

  Is anyway to add this in Windows 2008?

  Your help is very appreciated.

  BR/WT.

  Hi all

  I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.

  As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.

  Is anyway to add this in Windows 2008?

  Your help is very appreciated.

  BR/WT.

  Best place to get the most appropriate response is technet...

  Please repost this under, http://social.technet.microsoft.com/Forums/windowsserver/en-US/home

• 'alert disruptive account' from the Windows Live team (_ @_. _). is is authentic?

  I received ' disruptive account alert from the Windows Live team ( * address email is removed from the privacy * ), asking me to provide my personal information, including the password. It is also said that if I didn't, my account will be disabled. What should I do?

  Hello

  MS will never send you an email asking you to password or personal information. Delete the e-mail. It is NOT legitimate.

• Open the windows Explorer with no expanded document folders

  I would like to open windows explorerer with undeveloped Document folder.  It is for Vista, saw tips for XP but not tried yet

  Thank you

  Hello

  I suggest you follow the steps proposed by david vinod from the link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/changing-start-up-folder-in-Windows-Explorer/a5eb21ab-e2a8-4918-92ae-770cf9c57992

• (Redirected) The worst experience with customer

  I've been buying Dell computers among more than 15 years for me and help my friends for more than 15 years.  I would say that I've spent more than $20 K with them.  The most recent experience I had with Dell is the worst and I will no longer consider them as a source.  Here is a chronology of the events:

  11 August 2014: place an order for the laptop computer Inspiron 17R for a customer.

  August 14, 2014: received the laptop.  I tried to turn on the laptop.  It feeds for 5 seconds and stops (not "Dell" screen).  I checked all cables power, power supply and plug different.  I was very disappointed because the customer needs of the computer by the weekend.

  August 15, 2014: at 10:00, I called Dell to try and get a replacement via 800-822-8965 computer.  Dell said that they need the computer in front of me to help diagnose the problem.  I told them that this computer does not stay on.  They indicated that they me to run the installation program and a diagnostic problem.  I told them not possible because the computer does not stay on.  I said at this point, I want to send it to dell and have dell ship me a new.  They asked me to call 800-624-9896.  After you dial the #, they said they can't help me and asked me to call the # original (800-822-8965).  I have re-made the original # and they after me in good number of different departments, I need to call another # (800-624-9896).  I called the # asked and they have sent me everywhere in places (and repeating the problem each time).  He is now 6 hours later.  I retried the # more later in the evening and give all the information.  At this stage, they said that according to the information I gave them, it is not a Dell computer.  I said "(pas possible-j'ai obtenu l'ordinateur par l'intermédiaire de dell.com, a reçu avec un dell boîte avec l'ordinateur a un logo dell)."  I insisted to speak to a Manager.  Roy's came on the line and said that I can call 800-695-8133 day and next call and they would take care of her.

  August 16, 2014.  At 10:00, I called 800-695-8133, and they said that, because I want to exchange the phone, I need to call 800-822-8965 and they will refer me to a special division to have my computer fixed and that they are available during business hours only.

  At this point, I'm a bit fed up!  Why don't dell.com help me when I call during business hours to resolve the issue and rather me directions in all directions.  At this point, I want dell to take the laptop and give back me the money.  I will NEVER buy another computer from the new.

  Hi blee123,

  I'm sorry that you are having so many problems.

  Please repost this in the forum to support customer care.

  http://en.community.Dell.com/support-forums/customercare/

• Problem blackBerry Z30 register my e-mail account in the HUB Z30 / with my french carrier "FREE".

  I am confuse

  I have a regular e-mail account with "Free Webmail"

  Later, I add 2 more on «Webmail Free» e-mail accounts

  I've used them for a while now and I remember even the connection of these last two account.

  Now when I want to save my e-mail account in the HUB, he always says, my connection is bad...:!

  Why?

  It is perhaps one of the other 2.

  Can someone help me?

  Maybe I don't understand your question, but without the connection information, you cannot add accounts. Add in your accounts go to settings > accounts and enter the credentials it. If you do not know your passwords, you need to reset with these suppliers.

• Is there a way to hide the image of user account on the windows login screen?

  I am trying to find a way to hide the user account picture, because it does not match the custom wallpaper that I've put on to the login screen.

  We can change the image to something less offensive (even an empty frame - the procedure of which is in this article:http://smallvoid.com/article/vista-welcome-screen.html), but they cannot be removed entirely.  If you want the Welcome screen, you will have to live with the icons.

  Sorry, but this option is being Setup.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• move the window app with a finger slide

  Hello

  I lost a feature of my OS X (El Capitan) I really like and do not know how to bring it back. This feature allows to move a window from one space to another app just using one finger around any window title bar. He is still working on my Macbook, but not on my iMac. I guess you why. If anyone can help me.

  I never heard of 'one finger '; You can set to hang out with 'slide three fingers' in system preferences - > accessibility-> mouse and Trackpad-> Trackpad Options. Perhaps by comparing the settings that you have here and those in the system-> between your two Mac Trackpad preferences you can understand what is different.

  Or maybe you have a few add-on from third party that is installed on a mac, but not the other?

• Why the firefox profile is messed up and does not restore the tabs when you replace the Windows shell with something like bbLean

  I use Windows 8.1 x 64 but I can replace the Explorer bblean shell and when I do that firefox has issues with the profile such that cancel last closed tab or not to restore the tabs at startup.
  I was able to use the replacement of shell of bblean for years in previous versions of Windows, but he always had a weird behavior with firefox. Of course, I am currently in contact with bbLean developers working on the problem, but I would also like to hear what may be the cause of this.
  Thank you in advance.

  @guigs2
  Thanks for responding but I solved it somehow.
  'Replace the shell' means that I have deliberately change value in HKCU NT\CurrentVersion\Winlogon\Shell so it does not point explorer.exe but blackbox.exe.
  After the reset of my installation of windows and get rid of all programs, including firefox now I use firefox portable (not installation of vanilla from the original site) and found, I have no problem with profiles so far.

• How to share printer connected to the Windows XP with Windows 7 computer

  Original title: printer problem

  I have a HP USB printer connected to a PC running XP.  My wife has a laptop and connects to my Internet connection through a router.  Is there a command in XP that will access the printer even though it is not wireless?  The laptop is running Windows 7 and using Microsoft Home and Business 2010, and therefore the PC.   I was told that it is a command, but can't find it.

  Hi BudRamey,
   
  Share the printer from Windows XP for use with Windows 7 as well.
   
  See this link for more information on this operation:
  How to use Windows XP to share a printer with other people on your network
   
  Additional reference on:
  To share your printer 
   
  Once you share the printer from the computer Windows XP, select the wizard file sharing and printers in Windows 7 as well.
   
  Refer to the section "to turn on network discovery, file and sharing, printers and files public sharing under Windows 7" from the link given below to do the same thing.
   

  Networking of computers running different versions of Windows

• Reinstall the Windows XP with SP3 causes flickering on the screen

  Hello

  I recently reinstalled Windows XP SP 3 on my laptop. After installation, I started to notice that the screen flashes when I try to move or down in windows Explorer or even browsers. I thought that it could be linked to the frequency of the screen refresh.

  I noticed that refresh is set to "default to the setting material" and it gives me no option to change to 60 htz.

  can someone help me figure this out?

  
  

  You probably need to update driver for video (monitor) card. Or simply you need set the appropriate (through software coming with driver) discount rate.

  Optional: You can also customize some parameters of performance (uncheck the display contents of windows slides & lala).

• find the windows source with Ext. MSWMM file Director to edit saved slide show

  Windows Movie Maker. I want to edit a saved show. Need to source ending MSWMM file

  Hello

  What version of Movie Maker are you using?

  The value default save location for a Movie Maker-.mswmm project file is the 'My videos' folder and the default file name is "untitled.mswmm". Navigate to the following location:
  C:\users\username\My videos

  NOTE: with the extension mswmm files cannot be opened with Windows Movie Maker. You cannot open these files with other programs.

  You can also search files with extension .mswmm using Windows Search.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.