accumulation of hierarchy

Similar Questions

• Chargeback Manager does not display the hierarchy

  Hello

  After you have created a new hierarchy, Chargeback Manager cannot display hosts, clusters, etc. In vCenterDC_Errors.log, following error appears constantly:

  2013 08-09 T 12: 48:30.442 + ERROR 0200 [StorageSyncJob (4) on VC 515] [storage. StorageSyncJob] 4433: Transport error: error 503: Service unavailable

  org. Apache.Axis2.AxisFault: Transport error: error 503: Service unavailable

  at org.apache.axis2.transport.http.HTTPSender.handleResponse(HTTPSender.java:311)

  at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:200)

  at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:76)

  at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:400)

  at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:225)

  at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:438)

  at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402)

  at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)

  at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)

  at com.vmware.vc.sps.InternalSpsServiceStub.queryCapability (unknown Source)

  at com.vmware.vim.vcenter.datacollector.job.storage.StorageCapabilityInfoCollector.collectCbStorageCapabilities(StorageCapabilityInfoCollector.java:68)

  at com.vmware.vim.vcenter.datacollector.job.storage.StorageCapabilityInfoCollector.collect(StorageCapabilityInfoCollector.java:50)

  at com.vmware.vim.vcenter.datacollector.job.storage.Accumulator.collectAndStore(Accumulator.java:98)

  at com.vmware.vim.vcenter.datacollector.job.storage.Accumulator.accumulate(Accumulator.java:72)

  at com.vmware.vim.vcenter.datacollector.job.storage.StorageSyncJob.run(StorageSyncJob.java:54)

  And, in the GUI, the collector of data has linked errors with synchronization of storage, can someone please help me fix?

  Kind regards.

  Hello

  Could check you if the storage VMware Profile-Driven Service runs on the server vCenter added Server... ? If not, start the service. It should work

  Thank you

• I can isolate a bookmark with the filter, but how 'find' a bookmark in the hierarchy of the ShowAllBookmarks window?

  I want to find a bookmark to its location in the hierarchy of bookmarks, but all I can do with the filter is isolate a bookmark [s]; or by using the filter bar bookmarks, or in the ShowAllBookmarks window. For example, I know I have bookmarked some, but I want to move it into a new "folder" and rename it, perhaps; for this I need to be able to * see * in the hierarchy, as in the Mac Finder, when the filter turns into a file, and then "Show Original" to "Open the enclosing folder."

  Watch these extensions:

  • Show Parent Folder: https://addons.mozilla.org/firefox/addon/show-parent-folder/
  • Go Parent Folder: https://addons.mozilla.org/firefox/addon/go-parent-folder/

• Where is bookmarked in my favorites folder hierarchy?

  I have a comprehensive set of bookmarks, organized into a hierarchy of nested folders. Sometimes the bookmark I want is not where I expect to be. I can find it easily by using the search engine to organize bookmarks and I can then move to where I think it should be kept, but I can't find out where it was hidden! I put it somewhere just as sensitive? She was stored or moved inadvertently to the wrong place?
  It would be useful that, when a bookmark is highlighted in the right pane of the window to organize it, its current location could appear in the left pane emphasizing and expanding its hierarchy of folders. If not, perhaps the full path to the bookmark could be given in a column in the right pane which can be made visible or not by the user by right clicking on the column headers of the usual way.

  Install Show Parent Folder: https://addons.mozilla.org/en-US/firefox/addon/7372/

  • After installation, tools > Modules > Extensions, click view the Parent folder, click Options, set your options, there are only 2 Articles.
  • After installation, the bookmarks > organize bookmarks, click views, click show columns, click Parent folder to place a check mark, the new Parent folder column in the right pane. Rearrange the columns in the right pane by dragging the column to the desired position headers.

  See also go Parent folder: https://addons.mozilla.org/en-US/firefox/addon/7377/

• How to delete incorrect user names that have accumulated on gmail? Clear the cache and history do not help.

  Over time, because of me hitting the keys hard, my gmail login has accumulated several misspelled usernames. Every time I have access to gmail, all pop-up. I want to clean first, but I can't get rid of them. I followed your instructions to clear my cache and history, but nothing helped. I followed the instructions, click in the user name and then use the arrow and delete keys - also without success. I'm on a Mac OSX 10.4.11. Thank you!

  See:
  http://KB.mozillazine.org/Deleting_autocomplete_entries
  http://KB.mozillazine.org/Password_Manager

• How can I clean the accumulation of dust on the Satellite?

  The laptop is pretty hot - how can I clean dust accumulation.

  Hello

  If you want to clean the fans if the vacuum cleaner is a good tool.
  But be careful. If you n? t know how to do this, you should ask the Toshiba service partner for details. Guys have more experience of these things.

• Equium U400-145 full stop by an accumulation of static electricity

  I recently bought an Equium U400-145, really happy with it except...

  Yesterday, when I tried to turn it on, absolutely nothing happened - no light, no sound, nothing. I checked the plug, battery etc but nothing.

  I took it directly to the store and the guy told me it was due to an accumulation of static. He unplugged the power cord, took out the battery and you press the Start button for 30 seconds (to static discharge), replaced the battery and it started immediately.

  It is great except that it now that I have at home, it does the same thing about whenever I turn it off. I do not think that we live in a particularly "staticy" House and it is a bit of a pain to have to remove the battery, press the button for 30 seconds, replace the battery and turn it on whenever I want to put the machine running!

  I was wondering if anyone else has had the same problem and if there is a simple solution?

  see you soon

  These issues cannot be resolved by simple solutions.
  Simply the solution was done by your local dealer, but as you can see it was a temporary solution only.

  Then, contact the nearest service provider authorized as soon as possible.
  The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Do the Satellite P850-30V fan to run more quickly or reduce heat accumulation?

  So I've always had a lot of problems with this laptop of heating, and when maintenance of the fixed Bank nothing I assumed it was a feature, not a bug (so to speak). I often use it to play games, but while most of the games to automatically detect high graphics settings, I can't actually run these because of the massive accumulation of heat.

  If I put the machine in power saving mode, use a cooling pad and transform the graphics for the smaller settings, I can usually run things (even if they are slow and ugly), so even if it was a discomfort I treated just with her.

  However, when today I was installing an update of the BIOS, I noticed that the fan ran faster that I never saw before, that irritated me a bit because it runs more slowly even when the computer is about to overheat.

  Since then it can clearly go fast that the problem is obviously not an accumulation of dust.
  The only options for control of heat are those in power options, that are totally unnecessary. Is there something wrong with my computer, I'm missing something in terms of fan control or I was just a sucker for the purchase of this company in the first place?

  > The only options for control of heat are those in power options, that are totally unnecessary
  Windows power options are not useless
  Is that you can control the CPU as well as the method of cooling performance.

  Here is a very detailed explanation of each option
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  I recommend you to check the CPU power management area and change the State of the processor Maximum max 85%
  Also the cooling method should be set to 'active '.

  In any case, to avoid the high temperature of the GPU, you also use the Toshiba page graphics cards drivers because these drivers are modified and released for mobile use

• Dust has accumulated in the speakers.

  Dust is get accumulated inside the tiny gaps in the speakers of my motorcycle G 2nd Gen.
  
  How to remove it? I think it affects the quality of the sound from the speakers. Help, please.

  Hmm they sell these cans of compressed gas called dust electronic and detacheur plush, seems that would be the logical way to go for me.

• Important, I can't find the table of the hierarchy for Sony - for a research paper

  Hello

  Student and a PS3 gamer.

  I need a chart of the hierarchy for Sony - for a research paper

  I thank.

  Hi J D,

  Welcome to the community of Sony!

  Unfortunately, the information on research in education or reports can be provided online. I recommend the book "MADE IN JAPAN", written by Akio Morita (our founder) as an excellent resource for the history of Sony and our products. You can also visit the following Web site for a detailed presentation of the history of the company:

  http://www.Sony.net/SonyInfo/CorporateInfo/history/SonyHistory/

  You can also view our annual financial report to:

  http://www.Sony.net/SonyInfo/IR/financial/ar/index.html

  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• Organization chart... .to leave Vi hierarchy?

  I know that I went on this point the wrong way... probably the point #1 in the top ten things not to do when programming, not but...  (I'm not a software engineer, you guessed?)

  I have a state machine relatively complex vi developed and deployed and I don't have a chart for it. As I was only working on this, I know it all and how it works, but I need to have an overview for non-geeks out there, who will use the standalone version.

  Is it possible to generate a diagram of the VI hierarchy?

  or what is the best way to develop the organizational chart (not from the beginning..)

  Kind regards

  Leeser

  There is nothing automatic.

  Condition is not based on a construction of QSM (this design model can enable transitions that are impossible to document completely...), it can be done by hand with your favorite flowchart software (don't wince but I use paint and PP for this for so long I know all shortcuts and can do it quickly).

  I received the code developed by other groups and drwaing place the diagram of the State was the first step in the estimate of what would be needed to begin to support it.

  This thread is for some years on a similar topic and can be useful.

  I'm safely assuming that you have learned your leason for ' first, second document ", or do you want a conference?

  Ben

• Create ASAM ODS hierarchy

  I am configuring an ASAM ODS server. I already create the server, export the configuration, and installed on the client computer. Then I am able to connect from a client computer to the server but when I try to run the script to the hierarchy that does not work. My understanding of the forums another is that the script "main.vbs" to create the hierarchy should be run in tiara 2012 (I'm running with 2012 SP1 and still does not work).

  The first thing I notice is that after the conection icons are not the same in the interface ASAM (NAVIGATOR) and then when I run the "main.vbs" and "CreateASAMModelHierarchy.SUC" the error attached.

  Can you please help me with this problem?

  Neither Chei,

  In case you have the same problem as did nrin, here is once again this solution:

  To connect to the NI ASAM-ODS server with AOP5 please follow these steps:
  1. open the NAVIGATOR tiara.
  2. go to settings - data banks...
  3. Add a new data store. Or using the first button on the toolbar or via the context menu.
  4. enter a name, select the use AOP5 and click OK.
  5. in the following configuration dialog box, you must enter the computer name of the machine running the server OR ASAM-ODS.
  (This information is also displayed in the dialog box settings ASAM Manager DataFinder (DFSE)
  6. click on the [...] button in the URL line. In the next dialog box, select your server ASAM-ODS.
  7 leave the dialog boxes for configuring two clicks on the [OK] button and open the new data store in the BROWSER.
  8 download the creative hierarchy script that has been updated on January 27, 2014 and run in DIAdem SCRIPT

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Why don't I have a green exclamation point on one of my vi in the hierarchy of VI?

  

  Hi seafood

  Stay of execution

  
  

  Suspend execution of a Subvi to change the values of
  controls and indicators, to control the number of times that the Subvi is running
  before you return to the caller, or return to the beginning of the
  the Subvi execution. You can get all calls to a Subvi
  with the suspended, or you can suspend a specific call to a Subvi.

  To suspend all calls a slot - VI, open the Subvi and select Operate"
  Suspend when it is called.
  The Subvi suspends automatically when another VI calls it. If you
  Select this option when single-no, the Subvi does not suspend
  immediately. The Subvi suspended when it is called.

  To end a call specific Subvi, click the Subvi on the block schema node, and then select node Subvi
  The installation program in the context menu. Check the suspend when it is called to suspend enforcement only to this instance of the Subvi.

  "The window of the Hierarchy of VI , which view you by selecting view" VI hierarchy.
  indicates if a VI is interrupted or suspended. An arrow glyph, shown as
  as a result, indicates a VI runs regularly or not not unique.

  

  A glyph break, shown below, indicates a VI interrupted or suspended.

  

  A green break glyph, or a hollow glyph in black and
  White, shows a VI that stops when it is called. A glyph of Red break, or a
  Glyph of solid black and white, shows a VI that is currently
  pause. A glyph of exclamation point, shown below, indicates that
  the Subvi is suspended.

  

  A VI can be suspended and stopped at the same time.

  Determination of the current Instance of a Subvi

  
  

  When you hold a Subvi, calls list
  pull down menu in the toolbar list the chain of callers of the
  first level VI down to the Subvi. This list is not the same list you see
  "When you select go" callers to this VI, which lists asking them all screws regardless of whether they are running. Use call list
  menu to determine the current instance of the Subvi if block
  diagram contains multiple instances. When you select a VI in the menu calls list , its block diagram opens, and LabVIEW highlights the current instance of the Subvi.

  content above http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/debug_techniques/

• display the VI hierarchy window

  Hi all

  How do I call/display window hierarchy VI programmatically >?

  Thank you.

  
  

• How to create the hierarchy without creating a Subvi files

  Hello

  I have an existing LabView program that uses blocks of Subvi.  I want to change it so that I can't copy files Subvi (when I transfer the program to another computer).  The goal is to have a single file/program that I can copy, paste, and run on other computers.  So, I want to know if there is a way to create the hierarchy without creating a Subvi files or how to integrate the Subvi in the program.  My program and Subvi files are included here.

  Thank you

  Rocky

  You can create a version in an executable file.  It would be the most common way if you insist on having a single file.

  You could also build a source distribution in a zip file.  Then you just copy and paste the zip file and unzip it anywhere where you want.