Acer Apsire XC update - 603 USB 3.0

Similar Questions

• Cable specifications Acer (CP Mini VGA/LAN/USB) converter

  Does anyone know the specification of the converter cable for Acer (CP Mini VGA/LAN/USB) NP. OTH11.00C? (The less physical, such as weight and length Specificaiton)

  It is heavier than the Acer CP Mini VGA Converter NP. OTH11.00B?

  Ok. Amazon says:

  Model number of point NP. OTH11.00C (Mini PC in VGA/LAN/USB)
  Article 41 g weight
  Dimensions of the product 27.7 x 18.1 x 2.4 cm

  Model number of point NP. OTH11.00B (Mini PC/VGA)
  Article 36 g weight
  Dimensions of the product 14.9 x 12 x 2,2 cm

• update the USB driver

  I have updated to service pack 3 and the need to update my USB driver but cannot find an update for Windows XP.

  The drivers of USB ports are "integrated" XP with installation of XP Service Pack 1 / 2 (?), which is automatically part of Service Pack 3.

• After update BIOS USB Ports not recognized on Satellite L500

  Hello!

  After a BIOS update to 2.1, two of my three USB Ports no longer work. Is it possible to downgrade to the previous BIOS? Or what else could cause this problem?

  The system is a Satellite L500 - 153 (PSJ3E)

  Post edited by: koocho

  Go to Device Manager.
  Remove all USB hubs and USB controllers in the list of devices.
  Restart the computer and wait for Win has recognized and installed again all USB devices.
  Then test the USB feature.

• WINDOWS 7 STARTER/ACER ASPIRE ONE UPDATE HELP

  I have a brand new Acer Aspire One Netbook.  It is brand new, so after I did the initial installation for the new netbook, Windows 7 is an update.  When the update is complete, it blocks my netbook.  I get a black screen and a cursor only.  The only way I can fix it is to restore back to the factory and start all over again.  Anyone know why this is happening or that updates 62 is the cause? I basically can't update my OS until it is fixed or know where it is and it can check the updated list.

  You say you have 62 updates. The only true way to know what update is the cause of the problem is by installing one at a time.

  I was looking especially the optional updates as shows drivers etc. If you are offered drivers, you should consult the manufacturer's website to see if indeed you really need the updated drivers.

  TaurArian [MVP] 2005-2011 - Update Services

• Acer iconia a100 update fails "network coverage is currently poor."

  My Acer Iconia A100 has Android 4.0.3 and all updates fail with the message:

  Network coverage is currently low

  but it is not 100%, and all other network functions work fine.

  I see a LOT of problems, debate and questions with this same error on models Iconia tab, but so far no clear solution.

  Is this one? or is this just an orphan machine?

  Their support website lists nothing available for the A-100.

  Your version is the latest for PA_CUS1.

  the documentation is normally in the update zip file.

• Acer a1 810 conect with usb 3g modem

  Acer a1 810 4.4.2 KK help how I conect usb 3g modem. Not rooted

  In my view, is not possible.

• Acer Aspire switch 10 - Boot USB / Windows 8.1 installation of USB

  Hello
  I recently bought Switch 10. As it has only 32 GB SSD cut into 24 GB of windows and 8 GB partition for recovery, I tried to merge these partition to get rid of the recovery and have only a single partition SSD. Longbstory short, I failed and got a blue screen, then a restart and now I have this:
  http://i.imgur.com/NmAkhgO.jpg

  I have Windows 8.1 the official site of Microsoft, I have orginal CDkey (not OEM Acer's). The version I downloaded is a 32/64-bit Installer (I think, but it can be 32-bit only)
  I tried to configure the BIOS by myself, but it always puts me the blue screen of windows (with error 0000225).
  I provided the BIOS with the default settings screens: http://imgur.com/a/jtyN2

  I prepared the USB stick to a .iso image with a program called Rufus, GPT partitioning system.

  Then I changed the BIOS settings to allow non-secure startup and boot from USB HDD first, and when you start, I hit F12. But I still get that: http://imgur.com/yE48diG

  -What would I do? Be able to start Windows 8.1 installator, clear all partitions on SSD and make sure that you have a 32GB with windows.
  -What I need? Help, because I can not boot from USB and run Windows 8.1 installator.

  I found the solution, everything works fine.

  To do this, you must keep two things in mind:

  1. you may not use Microsoft official .iso for the USB program - it does create a bootable USB stick for UEFI bios, the official downloader for Windows have the ability to create USB bootable .iso downloaded, but it is not able to do.

  You must create bootable ISO using software of Rufus (type simpy rufus in google or LINK), then all you have to do is to make sure that you have selected GPT partition scheme for your bootable usb key and the FAT32 file system.

  2. the most improtant thing which is our Acer Aspire Switch 10 supports ONLY 32-bit Windows, just all the instalators Windows that contains the version 64 bits are wrong. Conclusion is simple, you need only 32 bits instalator, the 32-bit/64-bit custom works (like only instalation of 64-bit that is obvious)

  Hope this has helped.

• ACER recovery to create a USB bootable Windows 10 disc.

  I used ACER Recovery of my Aspire E5-511-C7X7 to create a Windows 10 bootable USB drive. The USB key that I used was a 1 terabyte external hard drive.
  Once the process is complete, the drive appears as 32 gigabytes, with 18 GB used.
  What happened to the rest of the storage?

  It's a WD (Western Digital) Eleemnts 1 terabyte drive

• ACER Z2 SYSTEM UPDATE ERROR

  Hi, guys, my name is Udo and I, I think that a big problem. I bought an Acer Z2. But one day that he said that I have a new update of the system. I clicked, snd, it says 'this update is not allowed for your device'. What should I do!

  You re - check if an update is available now?

• update the usb drivers

  How update you the usb drivers

  Hello

  ·         What service pack is installed on the computer?

  ·         Are you referring to any specific USB device?

  To update these drivers, follow these steps:

  (a) click Start, run, type devmgmt.msc, and then click OK.

  (b) double-click the type of device you want to update.

  (c) double-click the specific device that you want to update.

  (d) click on the driver tab, then click on set to update driver.

  (e) follow the instructions in the Hardware Update Wizard.

  (f) repeat steps 2 to 5 for each USB device.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WRT610N updated firmware, USB hard drive no longer works

  Hi all

  Thanks in advance for any help you may have.  I noticed a few people have had this problem, so maybe there is a difficulty.  I updated the firmware to Ver.1.00.02.10 because the release notes, said that it had improved the function USB hard drive.  I've updated the firmware, which is is held reset, pedaled power button, restored my setup, replugged my USB drive & lit.  I am still unable to access the USB drive.  It shows not only upward.

  My hard drive is a Maxtor One Touch 750 GB, works perfectly when it is directly attached.  I have 2 PC (one connected via gigabit and either through N), both works very well.

  Any thoughts?

  Thank you so much in advance.

  -Tim

  When you upgrade the firmware of your router, you must reset your router and reconfigure the settings on it once again, do not restore the Configuration of return still file once on your router. Just reconfigure a fee net settings on your router. That might solve your problem.

• After Windows Vista update, the usb port does not recognize the external hard drive

  My external hard drive still worked, but once I have updated Windows Vista USB Port do not see at all. Once I plug it into the laptop (HP Compaq) the port next to the port I plug the also work stoppages which is a usb mouse. Usually, when I have something plugged into the usb ports the laptop would also a sound signal which it does not.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Update Firmware USB PC7024

  Does anyone have the Powerconnect firmware update instructions pulling the file from a USB Pendrive .stk?

  Page 328 of the user guide details the steps required for the use of the USB key to install the firmware.

  www.Dell.com/.../PowerConnect-7024

  Copy the file specified in the USB device to the

  internal file specified in flash.

  copy usb://filename {backup-config | image | running-config | script filename | startup-config |} Filename

• "not enough memory to complete the operation" when you try to update the USB mouse driver in Windows 7

  USB mouse does not work. Driver must be installed. When trying to update driver get error message "not enough memory for operation of somplete.

  Hello

  1. What is the brand and model of the mouse?
  2. don't you get the same error message when you connect the mouse to a different USB port?

  I suggest you try the steps from the following link:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-driver-problems

  See also the link:  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  We know if you need help. We will be happy to help you.