Acer Aspire 481TG-M5. How can I clean the fan?

Similar Questions

• I have an Aspire 7739 G. How can I disable the mousepad on the keyboard?

  I have an Aspire 7739 G.  How can I disable the mousepad on the keyboard so that only my external mouse works?

  Thanks for any help on this.

  FN + F7

• I bought a used laptop. How can I clean the computer and only the program that the value of the factory. It's a dv4000 HP clubhouse with windows xp

  I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session.  How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings.  It's a HP Pavilion dv4000 with windows xp?  I have not all discs.

  Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).

  Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:

  
  

  Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .

  Do the following to reformat the hard drive and reinstall the operating system.

  1. Connect the PC to the power adapter.
  2. Close all programs.
  3. Click Start , click principally made programs , select System Restore and click on the PC recovery .
  4. When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
  5. The PC will restart.
  6. When the recovery of the PC of welcome message, click OK to continue.
  7. In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
  8. Restart the PC when prompted.

  As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.

  The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.

  NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired).  If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software.  So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.

  NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• How can I clean the accumulation of dust on the Satellite?

  The laptop is pretty hot - how can I clean dust accumulation.

  Hello

  If you want to clean the fans if the vacuum cleaner is a good tool.
  But be careful. If you n? t know how to do this, you should ask the Toshiba service partner for details. Guys have more experience of these things.

• Satellite P100 - 400 PSPA6A: How can I control the fan speed manually

  Good evening

  I would like to know how can I manually control the speed of the fan?
  I ask this question because my laptop rarely use the fan at a higher speed.

  Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
  I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)

  Kind regards.

  Hello

  I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.

  If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.

  If you are using Vista, then you should check the Vista Power Options:
  Check this thread how to manage Windows Vista power management features
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0

  But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.

• How can I clean the keyboard on Satellite A210-127?

  After a week of use for non computer keys on my keyboard "cvbn_" became sticky (but still working)? What I need to replace the keyboard, or I can clean it by myself? Please tell me * how can I under key *? Do I have to remove all the computer or the buttons are removable?

  Due to the non - using sticky keys. Very strange! I was three weeks on holiday and none of the keys on the keyboard are sticky.
  Anyway, unique key can be disassembled and if they are sticky because of the separation of coke inside or something similar I don't think you can clean it properly.
  Want you can do is to remove the plastic cover and watch what happens with the little mechanism under the lid. Place again put it in the right of the cover place and push down, but gently. You will hear a click and the cover should be in place again. You can remove this cover for each unique key.

  Check it out!

• How can I clean the radiator and the fan on my Equium L20?

  3 years I've had it now, and I think he needs a cleaning.
  The tutorials to open it, or how to access the fan and the heat sink?

  Hello!

  It of not necessary to disassemble the laptop. This should be done by a technician for laptop.

  To clean the radiator and fan, you can use compressed air jet or something else and could blow the dust from the fan.

  You will get no tutorials or manual how to take apart Toshiba notebooks only FSA (authorized service provider) have some guides.

  Good bye

• How can I clean the Bitmap Images imported

  Hi, I am using Flash 5. I have imported a .png image sequence and they look pretty rough and bitmap so I wanted to clean them.

  1. what I have to select each frame after import and adjust the settings of the bitmap for each image or I can doo this somewhere so it affects al images?

  2. I can't find the settings to clean up the bitmaps. I thought they would be in the Panel "Properties"?

  3. is it possible to set the pixelation or clean a .swf imported or is it better to clean the sequence before you save it as a .swf?

  Ideally, you should have images cleaned / correctly size / optimised before import you them into Flash.  Once they are in Flash, one thing that you can do that can help how the image appears, especially if manipulate you its size in Flash, is to set the image to allow smoothing.  This can be set using code or can be applied manually to the image in the library do a right-click, selecting Properties and by checking the option to allow smoothing.

• How can I clean the bookmarks dropdown?

  Over time, I gained a lot of undergrowth and shit in the bookmarks dropdown. I've deleted most. But there are still two problems.

  (1) < < search | Firefox Help > > lines and there are a lot of them (I don't know why) will not disappear when I right click and click on delete.

  2) there are dozens, perhaps hundreds, of blank lines. They are useless and clutter my HTML backup.

  How can I get rid of these two irritants?

  Thank you.

  Budd

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_places-database-file

• How can I clean the app Gallery?

  I recently connected the phone to my computer in the data transfer mode (see the SD card as a windows device). Here, I cleaned the .dcim file: moved and deleted hundreds of photos.

  But the Gallery still show them all as being on the phone. They appear in the comprehensive view with the version of the 'icon '. But the real pictures are of course not.

  I can't get rid of icons or different index tags. For deleted photos option delete is simply not there.

  Delete is only one possibility for images that are still on the device.

  Hi andershl,

  Please go to settings--> applications--> applications--> all--> storage media

  Here, press clear the cache and delete data.

  This will remove the storage media library, but not the actual files. Restart the phone and give him five minutes to rebuild the media library.

  If it worked then your phone should display your photos properly again.

  See you soon,.

  Nicole

• We want to wipe everything to an acer aspire 5630 laptop, how can we do

  My laptop is soaked, I have to wipe all the programs and I need help on how to do it.

  Hello

  This should help you.

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.

  If you have problems with the recovery Partition, you may buy Acer recovery disks.

  http://us-store.Acer.com/RCD/

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Aspire ZC - 606 how can I replace the hard drive

  Aspire ZC - 606, that will not start. It emits a sound once and asking you "Reboot and select proper boot device" or insert the bootable media...

  I can start the installation and the drive is missing, only the CD/DVD is here.

  I need to pull the HDD and backup all the data on it and replace it.

  I can't find anywhere that shows me the removal process.

  I replaced several HARD drives in all-in-one but have always found some instructions.

  Someone help?

  Pete

  before changing the HARD drive, I would try another SATA cable, is the part number: 50.U86D5.002

  to open the back of your ZC, you must open the 2 feet at the bottom of the back cover and unscrew the 2 screws; with a PIN that you had to push into the small hole in the DVD player until he slip; Then, you can lift the back cover.

• How can I clean the sides of my mouse rubber?

  I have the MS Wireless IntelliMouse Explorer 2.0.  I have about 2 years.  The rubberized sides became tights/pantyhose.  What can I use to clean?  The mouse works fine; It's the texture of the handles that is gross.

  Kirstin McDonald,
  Thank you for visiting the Microsoft Answers community forum.

  On hard plastic parts, you can use any kind of cleaner household soft on a soft cloth, never spray anything directly on any electronics.  You can get special cleaners to computer / electronic stores, but they are fundamentally very different from your common all-purpose cleaner.  Never use something hard that break down the plastic.  The soft rubber surfaces, to be more prudent to use something very gentle like a gentle liquid hand SOAP, just a tiny DAB on a cloth of web.  Or try these pre-humidifiees hand wipes.  If there is enough soft to wipe their hands with, then it should be safe for the mouse.  If the rubber started falling and sticking, do not try to clean it up, it's time to get a new mouse.

  I hope this helps.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I clean the remains of unwanted downloaded software files?

  as the remains of pieces of files

  Hello!

  
  
  You posted in the wrong forum, I'm afraid, because you don't really have a problem with the malware (unless this unwanted software is malware).
  If this is not malware, you can not be helped here.
  However, I would recommend looking up the software name in 'computer '. If you see "Softwarename'log or something like that, you can delete it as long as you are sure that it is nothing important to do with existing programs or your operating system."

• I have the acer S7 392. How can I disable the power button?

  Is there a way to disable the power button? Most of the PC force at least you press the power button for a few seconds before it shuts down, but this button, which is conveniently located for an accident, immediately stops the machine.

  Please someone tell me that I can turn it off or put it in the wok with a timer.

  BTW, love this machine (less button and power battery life)

  In this case, follow the steps below to solve the problem:
  1. click "Start" and select "Control Panel".
  2. in the control panel search window, search for Power Options.
  3 click on "Power Options" and in the window that appears, click on "Choose what the power button" option in the list of options in the left pane.
  4. click the drop-down menu besides that 'when I press the power button"and choose the option you want.
  5. click on "save changes".

  Hope this will help you.