How can I clean the radiator and the fan on my Equium L20?

Similar Questions

• Acer Aspire 481TG-M5. How can I clean the fan?

  Hi all

  Until recently my laptop was automatically shut down and the fan makes a noise excessive even when I'm not under what whatsoever. My guess is that dust in the fan should be cleaned, but I'm not sure how to clean since it is a monohull. Any ideas? I tried the google search, but the only thing that comes up is how to clean a Macbook.

  I have attached the links for instructions, video is for M5-581TG, but both look like. HTH.

  http://www.insidemylaptop.com/disassemble-Acer-Aspire-M5/

  https://www.YouTube.com/watch?v=Fw1pj_vvDXE

• I bought a used laptop. How can I clean the computer and only the program that the value of the factory. It's a dv4000 HP clubhouse with windows xp

  I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session.  How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings.  It's a HP Pavilion dv4000 with windows xp?  I have not all discs.

  Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).

  Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:

  
  

  Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .

  Do the following to reformat the hard drive and reinstall the operating system.

  1. Connect the PC to the power adapter.
  2. Close all programs.
  3. Click Start , click principally made programs , select System Restore and click on the PC recovery .
  4. When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
  5. The PC will restart.
  6. When the recovery of the PC of welcome message, click OK to continue.
  7. In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
  8. Restart the PC when prompted.

  As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.

  The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.

  NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired).  If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software.  So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.

  NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• How can I clean the accumulation of dust on the Satellite?

  The laptop is pretty hot - how can I clean dust accumulation.

  Hello

  If you want to clean the fans if the vacuum cleaner is a good tool.
  But be careful. If you n? t know how to do this, you should ask the Toshiba service partner for details. Guys have more experience of these things.

• Satellite P100 - 400 PSPA6A: How can I control the fan speed manually

  Good evening

  I would like to know how can I manually control the speed of the fan?
  I ask this question because my laptop rarely use the fan at a higher speed.

  Today, I listened to more than the normal fan, I have check the temperatures and the CPU was Core1:95ºC Core2:99ºC
  I'll clean the fan, but I want to know how can I manually control the fan (of course with the software: P)

  Kind regards.

  Hello

  I guess that the Toshiba Power Saver has been installed on your laptop and you use this software from Toshiba.

  If you are using Win XP and that the GST is installed, then you can check the configuration of basic settings and you might find the options to control CPU, CPU processing speed and method of cooling.

  If you are using Vista, then you should check the Vista Power Options:
  Check this thread how to manage Windows Vista power management features
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=38906&TSTART=0

  But in most cases, the cooling modules are controlled by fan that is stored in the BIOS table.

• How can I clean the keyboard on Satellite A210-127?

  After a week of use for non computer keys on my keyboard "cvbn_" became sticky (but still working)? What I need to replace the keyboard, or I can clean it by myself? Please tell me * how can I under key *? Do I have to remove all the computer or the buttons are removable?

  Due to the non - using sticky keys. Very strange! I was three weeks on holiday and none of the keys on the keyboard are sticky.
  Anyway, unique key can be disassembled and if they are sticky because of the separation of coke inside or something similar I don't think you can clean it properly.
  Want you can do is to remove the plastic cover and watch what happens with the little mechanism under the lid. Place again put it in the right of the cover place and push down, but gently. You will hear a click and the cover should be in place again. You can remove this cover for each unique key.

  Check it out!

• How can I clean the Bitmap Images imported

  Hi, I am using Flash 5. I have imported a .png image sequence and they look pretty rough and bitmap so I wanted to clean them.

  1. what I have to select each frame after import and adjust the settings of the bitmap for each image or I can doo this somewhere so it affects al images?

  2. I can't find the settings to clean up the bitmaps. I thought they would be in the Panel "Properties"?

  3. is it possible to set the pixelation or clean a .swf imported or is it better to clean the sequence before you save it as a .swf?

  Ideally, you should have images cleaned / correctly size / optimised before import you them into Flash.  Once they are in Flash, one thing that you can do that can help how the image appears, especially if manipulate you its size in Flash, is to set the image to allow smoothing.  This can be set using code or can be applied manually to the image in the library do a right-click, selecting Properties and by checking the option to allow smoothing.

• How can I clean the bookmarks dropdown?

  Over time, I gained a lot of undergrowth and shit in the bookmarks dropdown. I've deleted most. But there are still two problems.

  (1) < < search | Firefox Help > > lines and there are a lot of them (I don't know why) will not disappear when I right click and click on delete.

  2) there are dozens, perhaps hundreds, of blank lines. They are useless and clutter my HTML backup.

  How can I get rid of these two irritants?

  Thank you.

  Budd

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_places-database-file

• How can I clean the app Gallery?

  I recently connected the phone to my computer in the data transfer mode (see the SD card as a windows device). Here, I cleaned the .dcim file: moved and deleted hundreds of photos.

  But the Gallery still show them all as being on the phone. They appear in the comprehensive view with the version of the 'icon '. But the real pictures are of course not.

  I can't get rid of icons or different index tags. For deleted photos option delete is simply not there.

  Delete is only one possibility for images that are still on the device.

  Hi andershl,

  Please go to settings--> applications--> applications--> all--> storage media

  Here, press clear the cache and delete data.

  This will remove the storage media library, but not the actual files. Restart the phone and give him five minutes to rebuild the media library.

  If it worked then your phone should display your photos properly again.

  See you soon,.

  Nicole

• How can I clean the sides of my mouse rubber?

  I have the MS Wireless IntelliMouse Explorer 2.0.  I have about 2 years.  The rubberized sides became tights/pantyhose.  What can I use to clean?  The mouse works fine; It's the texture of the handles that is gross.

  Kirstin McDonald,
  Thank you for visiting the Microsoft Answers community forum.

  On hard plastic parts, you can use any kind of cleaner household soft on a soft cloth, never spray anything directly on any electronics.  You can get special cleaners to computer / electronic stores, but they are fundamentally very different from your common all-purpose cleaner.  Never use something hard that break down the plastic.  The soft rubber surfaces, to be more prudent to use something very gentle like a gentle liquid hand SOAP, just a tiny DAB on a cloth of web.  Or try these pre-humidifiees hand wipes.  If there is enough soft to wipe their hands with, then it should be safe for the mouse.  If the rubber started falling and sticking, do not try to clean it up, it's time to get a new mouse.

  I hope this helps.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I clean the remains of unwanted downloaded software files?

  as the remains of pieces of files

  Hello!

  
  
  You posted in the wrong forum, I'm afraid, because you don't really have a problem with the malware (unless this unwanted software is malware).
  If this is not malware, you can not be helped here.
  However, I would recommend looking up the software name in 'computer '. If you see "Softwarename'log or something like that, you can delete it as long as you are sure that it is nothing important to do with existing programs or your operating system."

• How can I clean the file deleted? All started doing this! don24

  WHEN I CLICK ON DELETED ITEMS RIGHT

  'EMPTY DELETED ITEMS' FOLDER BOX GOES UP.  I CLICK ABOVE

  THEN I CLICK ON 'YES' "ARE YOU SURE YOU WANT DLET"FOLDER OF THE DELETED ELEMENT CONTENT.

  BOX COMESUP "UNKOWN ERROR HAS OCCURRED."    IT WILL NOT REMOVE THE 'DELETED ITEMS FOLDER.

  HELP, HELP, HELP

  THIS JUST STARTED THIS AFTER YEARS OF NO PROBLEMS

  lee24don

  What is Windows Mail? Try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   

• How can I clean the unwanted spot?

  I want to take the colors of my drawing and convert them to spot. I would put these tones on a group of custom colors. However, after I did my approach, I have 2 exact same tones in my color chart, as the image below.

  

  I want to get rid of one outside the swatch group (one that the yellow arrow pointing towards). However, if I

  app.activeDocument.spots[0].remove()
  

  two of them disappeared.

  Here are my steps of creating the color of the work task:

  1. target the work I want to convert color;

  2. create a new instance of the Spot on the document because the place is not a public constructor;

  3. create a new color whose RGB values are the same as the filling of the work;

  4. create a new instance of SpotColor;

  5. set the spot on SpotColor instance property and property of color on the property of Spot;

  6 Add the SpotColor instance for the swatch group.

  7. the work instance SpotColor fillColor value.

  And here's the code.

  var doc = app.activeDocument;
  var layer = doc.layers.getByName('art');
  var rect = layer.pageItems.getByName('rect');
  
  
  var newRGB = new RGBColor();
  newRGB.red = rect.fillColor.red;
  newRGB.green = rect.fillColor.green;
  newRGB.blue = rect.fillColor.blue;
  
  
  var newSpot = doc.spots.add();
  newSpot.name = 'R=' + newRGB.red +
    ' G=' + newRGB.green +
    ' B=' + newRGB.blue;
  newSpot.color = newRGB;
  
  
  var newSpotColor = new SpotColor();
  newSpotColor.spot = newSpot;
  newSpotColor.tint = 100;
  
  
  var newSwatch = doc.swatches.add();
  newSwatch.color = newSpotColor;
  
  
  var swatchGroup = doc.swatchGroups.getByName('my_color');
  swatchGroup.addSwatch(newSwatch);
  
  
  rect.fillColor = newSpotColor;
  

  AHA!  It's actually giving you the desired result: Add the newly created directly in the swatchGroup place using the addSpot command, it seems that there is no need of adding a nuance to the document first.

  function test(){
      var doc = app.activeDocument;
      var layer = doc.layers.getByName('art');
      var rect = layer.pageItems.getByName('rect'); 
  
      var newRGB = new RGBColor();
      newRGB.red = rect.fillColor.red;
      newRGB.green = rect.fillColor.green;
      newRGB.blue = rect.fillColor.blue; 
  
      var newSpot = doc.spots.add();
      newSpot.name = 'R=' + newRGB.red +
        ' G=' + newRGB.green +
        ' B=' + newRGB.blue;
      newSpot.color = newRGB; 
  
      var newSpotColor = new SpotColor();
      newSpotColor.spot = newSpot;
      newSpotColor.tint = 100; 
  
      var swatchGroup = doc.swatchGroups.getByName('my_color');
      swatchGroup.addSpot(newSpot);
  }
  
  test();
  

• How can I clean the data which are drawn upward during the filling of fields?

  For example, when I start typing my e-mail address I get a few suggestions that have been misspelled errors.  Thank you

  Depends on what browser you use the approach. Set your browser to clear 'Saved historical form' it will clear.

• I tried to reload XP using my drive but it failed due to a hardware or software problem, XP is stuck in a loop and does not load. How can I clean my disks and reload XP?

  I have a HP XP of 2005. After a year of use of a premium support tech, my OS must be installed.

  I used the disk and followed the installation steps. I received a message on there was a hardware or software that would effect the install and may not work properly. In any case, I continued and of course I am stuck in a loop.

  I can't go to my office.

  First of all, I get a notice on a black screen to select the operating system to start. There are 2 identical choices. Microsoft Media edition.

  Once selected, a screen appears. "We apologize for the inconvenience, but Windows did not start successfully.
  a recent hardware or software change might have caused this. "

  I have enough to make choices and none work.

  1. choose the last known good configuration to return to the most recent settings that worked. :

  2. do not apply

  3. There is a selection in the Safe Mode with command prompt and if I had used the F8 key to reinstall this option would have worked. To do this, do not hurry.

  what I get is a list of drivers that are installed.

  I'M IN A LOOP BETWEEN CHOOSE TO START WINDOWS WITH MICROSOFT XP THEN A NEW SCREEN APPEARS, WHATEVER I HAVE THAT LISTS THE CHOICES ABOVE.

  I need help reload my OS and wipe the hard drive clean. Is there a software I can download to help?

  Hi btbtms,

  You can follow this link to find out how to install Windows XP on your computer.

  How to install or upgrade to Windows XP