Acer had G 4752 BIOS screen HELP!

Similar Questions

• MY Acer Aspire T135 starts, stops at BIOS screen does not. F10 at startup not working. NOW?

  No matter what I do, the PC goes to the BIOS screen and stops. I have the system restore disk and a recovery disk. How can I get the system to answer?

  I don't know how it happened - it's in an office space with all the cables at the rear - BUT... the keyboard is disconnected!  All is well now!

• No satellite P300-17R no boot after BIOS screen

  Hi I have a major problem:

  When starting the laptop, I have the chance to see the bios screen after that normally you should see that win 7 starts up. I get a blank, backlight screen works but no cursor blinking or what so ever.

  Ive tried the following things:

  1. try all a/c topics like removing batteries etc related.
  -> nothing going on (white screen)

  2. ive tried inorder of key combinations possible to reach safe mode option:
  -> nothing going on (white screen)

  3. I remove the HARD drive and tried to boot from dvd - rom windows 7:
  -> works fine

  4. replace the HARD drive and set the bios to boot from dvd - rom only:
  -> nothing going on (white screen)

  5 ive got another laptop so I put the toshiba HARD drive and tried to see if it works:
  -> Win 7 works fine and I can get access to my HARD drive works fine and Win 7 also works very well

  6 ive the other the other laptop in the Toshiba laptop HARD drive then put it:
  -> ive got a work screen where windows vista asks to restore from a certain point (maybe cause of the difference in hardware between 2 laptops?)

  What's wrong???

  Please help me...

  Can we continue discussion under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=226565?

  I mean, why start the second thread with the same problem.

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  I have install this laptop brand new, pre-installed with Windows 8.1 for my sister-in-law who bought it.  The installation went well BUT the 16 GB USB device I bought such as advised by the literature of Acer to store the recovery partition was not large enough, 14.4 GB physical capacity.  Acer the book says to use a 16 GB or more, so I did.  I naively thought that a USB key which has been marked 16 GB would be appropriate.  Not the case.  I had to buy a bigger but am still waiting for delivery.

  So I decided to any HARD drive to save the work I had done, but found only the Acronis Backup and Recovery DVD would not start the image.  I went into the utility configuration and adjusted the start parameters to inherited and modified device priority.  Acronis wouldn't so I did not continue.  I went back into the configuration utility, use F9 to restore the default value and to my astonishment that the DUAL boot option was now gone and Windows startup option was also gone.

  This means that £800 this laptop is now unusable.  The installer standalone reconfigured without warning.  Nowhere is there at - it advice or advice do not use the Setup utility when it erases the features that cannot be recovered by using F9 to restore the default configuration.  If this isn't a serious design flaw, I don't know what is.

  I am deeply worried because the idea of a BIOS setup utility behave in this way seems so unlikely that I wonder if anyone will believe me.  How are the Setup utility has been designed to self-harm like this?

  Your suggested action works!  Thank you very much.  You saved my life.

  loungehake

• Hello-bios screen for 5-10 seconds before his stop

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  HI - my computer crashed running xp pro... now when I try to start up it shows the screen of the bios for about 5-10 seconds before stopping... long is not open enough to even check the bios. Help, please

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What kind of computer you have? vader95 Windows 95-7 office 97 - 2010 Ubuntu 9.10 - 10.10

• Computer Vista gets to the BIOS screen, then restarts continually.

  It's on a Dell Inspiron desktop PC. I was browsing youtube, when I noticed when I clicked on something, he did not. Although the outlines of the buttons flashed as soon as I waved above them. If I clicked on a bookmark, it says that my internet connection is bad. But I was watching youtube, 3 minutes earlier.
  I close firefox, then go to the office. I CAN'T RIGHT CLICK! OR LEFT CLICK. On some points, I can click.  And some I can't. I unplug the computer from the wall. Rinse power. Wait 5 minutes. Restarts. Computer gets to the Dell BIOS screen. Will beep once, makes a sound of flickering, light flashes orange and repeats the process forever. I press F12 for the boot menu. Press enter on the SATA hard drive. And it starts fine. But I want to solve this problem, help!

  Hello

  You do not have the cold hard first permanently in the boot order?

  If you do, try the following steps to find your problem:

  "The computer does not start in Microsoft Windows Vista"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=DSN_343119&isLegacy=true

  Using Dell Diagnostics:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  See you soon.

• keyboard does not work when you start. Unable to get to the bios screen.

  When I reboot to get to the bios screen my keyboard does become functional until windows load. I don't remember what is a problem in the past, but since I disconnected everything recently I was wondering if it happens to be a USB port which remains hot during startup.  I have a Gigabyte motherboard.

  Thanks for all the help.  I found a port that remained hot during startup.  Not an easy feat because there are 6 USB ports on my MB.  Then after may restart to finally find, I remembered that I have also 2 USB ports on my Dell monitor that remain hot even when the computer is off.  A lesson I will never forget.

• My lil brother has used a fake iphone charger to charge his Iphone on my mac pro and my laptop down, someone had something similar happen? Help

  My lil brother has used a fake iphone charger to charge his Iphone on my mac pro and my cell phone shot someone had something similar happen? Help

  Try http://www.makeuseof.com/tag/reset-macs-smc-pram/

• Re: Satellite L635 (PSK04E) starts, but there is no BIOS screen

  Hello

  I have some problems with book L635, it starts without the BIOS screen. I checked the memory, cpu-OK-Ok.
  There a reaction on the service Fan Fun + B + F key.

  BIG THX IF I GET THE ANSWER.

  > it starts without the BIOS screen
  How to understand this?
  See Toshiba welcome screen on startup?
  Have you tried to use F2 to enter the BIOS settings?
  Windows starts correctly?

• Need to access the BIOS screens

  "HP Pavilion p7-1447 c desktop PC Win8x64.  FN2 gives me the diagnosis UEFI screens.  I need to enter the BIOS to set the NumLock on at all times.  How to access the BIOS screen?

  Hello

  Turn on and immediately press the ESC key to access the select start--> F10 menu to access the BIOS.

  Best regards

  ERICO

• Again the stuck BIOS screen

  Yet once my moms 7 workflow gets stuck on the Bios screen. Is it normal to happen twice or is my defult of flow 7 moms also is there a way of turing on the Bios updated?

  You could try updating the BIOS with the latest version if you have not already?

• My acer m3 - 581 t bios 1.13 preinstalled windows 7 and acer bios t 2.17 m3 - 581 preinstalled windows 8.

  I'm just curious and I need answer

  My acer m3 - 581 t bios 1.13 preinstalled windows 7 and acer bios t 2.17 m3 - 581 preinstalled windows 8, this pc two 2 have the same hardware
  Why acer unlock bios 2.17 the two different whit pc operating system that is my question to acer please need explanation

  Ok. I understand your desire to use the latest technology. Unfortunately, there is not a way to upgrade a template provided with Legacy BIOS to EUFI. I apologize for any inconvenience.

• When I restart Windows 7 home premium, the computer hangs on the bios screen.

  I don't know what exactly when this problem started, but I can stop the machine and it will start normally.  If upodates are installed and the machine restart it hangs at the bios screen all the time.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Blocked everything by improving Windows 8.1, the upgrade to the screen "help us protect your account.

  Original title: "Help us protect your account" freeze
  I recently tried to update my windows to 8.1. I thought it was a simple task, now, my computer has completely locked me because he says I need a security code. I jumped through all the hoops and entered the code and it says theres a temporary problem with the service, please try again. If you continue to get this message, try again later. I have tried this over a dozen times and I'm extremely frustrated. I can't even undo what I was trying and simply abandon my 8.1 update using my desktop again. It is just frozen on the screen 'Help us protect your account' HELP!
  Frustrated

  Hi Carol,.

  We are sorry to know that while you were trying to upgrade to 8.1 Windows, upgrade stuck to the screen "help us protect your account. Not to worry, Carol, we try our level best to solve this problem.

  I am pleased to inform you that I came across the similar post where in, turn off WIFI, Ethernet and restarting the computer has helped many users with this problem. Check out the link next where a member of the community has provided the solution for this problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/81-installation-cannot-get-past-help-us-to-protect/a4481db9-d75e-48D0-B462-78dd8385e37f

  Please post here with the State of the question and we will be happy to help you further.