Acer Iconia W510 portUSB Tablet

Similar Questions

• Reboot Acer iconia W510 problem

  Every time when I start my Tablet (Acer Iconia W510) after the password a message saying something like a reboot is necessary due to some problems (the message and the Tablet works very well after that and I have not noticed any reboots after the password, but maybe before).

  In any case, the message said that the problems exist in the following files

  C:\Windows\Minidump\063013-12703-01.dmp
  C:\users\helja\appdata\local\temp\wer-31921-0.SysData.XML
  C:\Windows\MEMORY. DMP

  Also during the installation of some programs or updates and if the restart is required after installation of the tablet to the first encounters a problem and fails to restart at first but can solve the problem and Tablet so far started normally. (only a message that there are reboot problems but no precise information on the nature of the problem is given)

  Hi Kari,

  Thanks for the update.

  Sometimes, between the uninstalling and reinstalling software/drivers, it's a good idea to run the Windows Disk Cleanup utility. The disk cleanup utility to free disk space by deleting unnecessary files from your computer.

  Please consult the following link and remove some unwanted files:

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Please get back to us with the State of the question.

• Acer Iconia W510 | Demotion in Windows 8

  I upgraded my Acer Iconia W510 at 10 Windows Tablet a few months ago. It was supposed to be all very well and all that, but when a month passed, funky things began to happen.

  -The Tablet would break streaming

  -Taskbar is almost always does not

  -Entry is very slow and registry keys after 5 seconds.

  -Graphics drivers are not compatible with Windows 10

  I would like to go back to windows 8, but all windows.old and all other windows 8 file was deleted...

  10 Windows will not let me downgrade, because it has been more than 10 days that I used it.

  Is it possible that I can downgrade to Windows 8, or am I supposed to stay with a piece of a $150 of junk?

  In your win8 device, you can create recovery media that will help you to re - install win8 in win10 machine, if the recovery partition is still intact.

• No image with customized image of Windows 10 Acer Iconia W510

  I'm trying machines Acer Iconia W510 image with an image of Windows 10 we did. We have already photographed a few tens of individuals. A dozen, however, refuse to take the picture. They are currently on Windows 8. The image on an external hard drive that plug us into the USB port.

  The steps I take to the imaging process are as follows: "Change PC settings"->"update and recovery"-> "recovery"->"Advanced startup" and I click on the button 'Restart now', who sends me to a screen with three options, continue to windows 8.1, troubleshooting, and turn off your PC.

  I select 'Troubleshoot '->' Advanced'-> "Image system recovery"

  The Acer screen appears with "Preparation of the system image recovery" at the bottom. I sign in the administrator account when prompted to choose an account.

  A window appears and scans for images. I selected the "Select a system image" option and then select the correct image of Windows 10.

  Then, I select the only available option for "select the date and time of the system image to restore.

  After that, there is a message that says "for the restoration of this computer, needs of Windows to format the drive that the Windows recovery environment is running on." To continue with the restore, shut down this computer and it boot from a Windows installation disc or a disc repair system, then try the restore again. "At this point, I have no way to continue.

  Even if I plug the USB recovery drive we used, I get the same message. I don't know what the problem is or how to get past. Any help is appreciated!

  Hi Ryan,

  According to the description, you can not install updates and the this issue may occur if one or more of the following conditions are met: 

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  Try it out below mentioned methods and see if it works for you.

  Method 1

  First of all, I suggest you run Windows update troubleshooting tool to get the problem automatically detected and corrected. This fixit checks the configuration of the Windows Update components and repairs, fixes incorrect Windows Update the locations of data and records of necessary services. For the race, the troubleshooter refer to sub article what can I do if I have problems to install updates.

  Windows Update: FAQ

  Method 2

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Keep us.

  Kind regards

• Acer Iconia A1 - 810 Tablet

  I have an Acer Iconia Tablet A1-810. And now, it will go past start screen. The reason why. Is the cause I let some teenagers play on it, and every time I got it home would not work. When I asked what they were doing. They said they played the games and remained on the market for the APA. Then I said to their parents, but they cannot afford to have it fixed and they said he daughter says that boys strive to root it. Than just numbers. The Tablet is jellybean and they tried to put a kitkat on it. As much as I hate it. There is nothing I can do now. But it fixed if all goes well. < br > < br > Acer Will fix this for me. And if so how can I get it fixed. I never wanted it rooted cause of the risks of not having on a roadtrip on go on a DATE. < br > it be nice if you can have sent to acer to be fixed. Is it? And how?

  I think that Acer may only be fixed, please contact your regional Acer support service.
  I don't know if it will be cheaper to buy a new.

• Acer Iconia W510 won't batteries

  I got the W510 Iconia for a month or two, and I have a problem that the computer shuts down with no warning or anything.

  Me I found the problem, because it only happens when the battery in the keyboard is very close to 0% power.

  The thing is that there are 95% of the power of the Tablet battery, so it's as if the computer will not pass through one battery (the one on the keyboard) to the other (in the Tablet).

  I don't know if it's a Win8 parameter or if there is something I can do?

  It's really annoying, because it gives me only about 3-4 hours of battery life with the connected keyboard.

  Any help will be greatly appreciated.

  "first of all use the docking station battery, and once she is discharged at 1%, it will move to the Tablet battery." Looks like yours does not commute. The question then becomes "where is the failover of 1%? If in the material, you have a defective unit. If the software, the issue would be to find.

  For me the easiest way would be to have a switch on the printed circuit relay (with perhaps a darlington in front but discrete components.) When a good dock is connected, the tension of mooring is used to change the power source to the dock. When the dock is disconnected or goes ded the coild is greater and the main battery is attached.

  The tab work main battery if you disconnect the dock?

  If she then just had a wall out - thought: If you go into control panel > power > open the current plan and select "advanced options" will open an "Advanced settings" list and you will have a number of options.

  I don't know if the battery of the dock is considered to be local but if a switching relay, I suspect it is. Note the switch designed ACER will be 1%. The setting of low battery on the laptop I have at the moment is low at 10% and 5% critical battery. It is possible to set the 'low battery action' to 'stop, sleep or into hibernation'.

  So it is possible for Windows power management be set so as to close the tab until it reaches the passage of 1%.

  Maybe worth a visit.

  PS I do not have to exhaust all the batteries completely. Personally would fix the passage will take place at 10% or more.

• Acer Iconia W510 Bios password forgotten

  I added a password for bios if I could change the boot mode, now I forgot the password. How can I get in the Boot section? The Tablet starts normally in windows!

  If removing the CMOS battery is not paractical you can search online for freeware reset.

• Acer Iconia W510 someone arriving kkkkk to work?

  I installed kkkkk but when I run the app, all I get is a black screen.  Someone at - it get this working?

  For the acer recovery management software, check under C:\OEM\Preload\Autorun\app\Acer Recovery Management v6

• The wires for the Acer Iconia W510/W511 of power

  Hello.

  Is there anyone who had to take a closer look how the wires are connected to the 12V socket?

  Reason is, I would use the tablet in my garden, where the only power is my solar cell / battery of 12V of the summer.

  I know that I could rip it myself, but the Tablet is still under warranty, I think not only encouraged. Also I know that I can use a UPS, but a) my inverter is noisy and b) it's a bit silly to transform 12V-->--> 12V 220V

  concerning

  / Henning

  FYI here is a photo taken with my phone, as you can see just on the ground and Vout being on the ground, at the end of the connector,-, + as shown in the photo on the PSU should be child's play to hit something up.

  Image of Picasa PSU

• white pixel on acer iconia w510 difficulty anyway?

  I recently noticed a white pixel bright on my Tablet his only visible on white screens and are visible on the desktop. Is it possible to fix this? Can it be sent repair. I'm picky when it comes to my devices and that a small pixel does not bother me.

  almost all the screen have a pixel that is stuck somewhere, I don't think that sending to the service help

  Maybe according to the place where pixel on the screen?

• Acer Iconia W3 mit Tastatur verbinden

  Hallo zusammen,
  ICH besitze ein Acer Iconia W3 810 Tablet.
  Habe ich zum repair enchanted, leider wurde dieses're after auf den Werkszustand zuruckgesetzt.
  ICH habe die official, dazu for Bluetooth Tastatur von Acer one. Schaffe ich Jetzt nicht mehr, die Tastatur mit dem Tablet zu verbinden.
  WER kann mir helfen?
  Viele Grüße, Felix

  Hi Felix,.

  Acer hat 2 keyboards passend zum W3.

  1 normal Tastatur

  http://global-download.Acer.com/GDFiles/document/user%20Manual/user%20Manual_Acer_1.0_A_A.zip?acerid...

  Yesterday of the auf der back neben dem Einschalter eine taste, erfahrungsgemass sharp as 5-10 Sekunden aatch, damit überhaupt musst was passiert.

  2 crunch KB

  Yesterday should're Tatsächlich die Powertaste breast, ein Handbuch hab ich aber leider nicht found.

  Die institution unterscheidet sich aber die I nach Windowsversion.

  The sagtest, dass das Gerät zuruckgesetzt wurde, geh ich davon aus, dass Windows 8 is ist noch da?

  Yesterday musst uber die Charmsleiste-> Einstellungen-> PC Einstellungen change-> Funk BT anschalten.

  Dann auf und Geräte hinzufügen, solange das keyboard Pairing ist im Gerät, ist are also visible.

  8.1 Litauen ist unter are PC - Einstellungen unter-> PC und Geräte-> Bluetooth (wird gesucht, wenn wird angeschaltet Bluetooth automatically).

  Probier was wrong am keyboard durch Knopfe print, wenn irgendwann voltage, war are schonmal richtig und der Rest dann auch going should.

  Gruss

  Ruta

• How to take a photo with the Acer Iconia W 4 820

  Hello

  Anyone know how to take a photo with the Acer Iconia W4 820 Tablet and get it back on my pc?

  hans0919

  Easiest is to copy the files with a USB key, but the most elegant (IMHO) is across the network. Just join each machine to your homegroup, and you can copy back.

• Manual Acer Iconia TAB A100-07U08U 7 inch Tablet (8 GB) by Acer

  How can I activate my

  Acer Iconia TAB A100-07U08U 7 inch Tablet (8 GB)

  ???

  Nice day

  Download the user manual from: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3849

  Kind regards

  FReeZA

• How to find the template information for an Acer Iconia Windows 8.1 Tablet

  I just got this Acer Iconia Windows 8.1 parent Tablet without CD and docs. Is there a way to discover its information model? Also, is it possible down to load its software system and recovery once I discovered its model?  Or can I reset it without CD? I need to back to factory setting because my parent forgot the password and I want to change the language.

  Thanks in advance!

  Welcome to.

  on recovery, read this KB:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/32035/~/Iconia-w3-810-recovery-using-Acer-RECOV...

  to purchase recovery media:

  Acer recovery media
  If you are in the United States, you can buy it:
  http://store.Acer.com/store/aceramer/en_US/eRecovery

  If you are outside the United States, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• Should what app I use to connect my ACER Iconia 8 tablet wireless to my Samsung TV compatible dongle?

  How can I move apps on my ACER Iconia Tablet 8 from the internal memory to the external micro-SD card installed?   Also, can what app I use to connect wireless to my Samsung TV with a dongle on this subject?

  official app from Samsung?

  https://play.Google.com/store/apps/details?ID=com.Samsung.companion

  on applications on SD card, applications of the system (the default application installed) can be moved; downloaded application can be moved if they have options.

  settings/applications

  Locate the application that you want to move, press and select move to SD card

  Note that this move (if possible) a part of the application, most of the files will remain in the internal memory.