white pixel on acer iconia w510 difficulty anyway?

Similar Questions

• No image with customized image of Windows 10 Acer Iconia W510

  I'm trying machines Acer Iconia W510 image with an image of Windows 10 we did. We have already photographed a few tens of individuals. A dozen, however, refuse to take the picture. They are currently on Windows 8. The image on an external hard drive that plug us into the USB port.

  The steps I take to the imaging process are as follows: "Change PC settings"->"update and recovery"-> "recovery"->"Advanced startup" and I click on the button 'Restart now', who sends me to a screen with three options, continue to windows 8.1, troubleshooting, and turn off your PC.

  I select 'Troubleshoot '->' Advanced'-> "Image system recovery"

  The Acer screen appears with "Preparation of the system image recovery" at the bottom. I sign in the administrator account when prompted to choose an account.

  A window appears and scans for images. I selected the "Select a system image" option and then select the correct image of Windows 10.

  Then, I select the only available option for "select the date and time of the system image to restore.

  After that, there is a message that says "for the restoration of this computer, needs of Windows to format the drive that the Windows recovery environment is running on." To continue with the restore, shut down this computer and it boot from a Windows installation disc or a disc repair system, then try the restore again. "At this point, I have no way to continue.

  Even if I plug the USB recovery drive we used, I get the same message. I don't know what the problem is or how to get past. Any help is appreciated!

  Hi Ryan,

  According to the description, you can not install updates and the this issue may occur if one or more of the following conditions are met: 

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  Try it out below mentioned methods and see if it works for you.

  Method 1

  First of all, I suggest you run Windows update troubleshooting tool to get the problem automatically detected and corrected. This fixit checks the configuration of the Windows Update components and repairs, fixes incorrect Windows Update the locations of data and records of necessary services. For the race, the troubleshooter refer to sub article what can I do if I have problems to install updates.

  Windows Update: FAQ

  Method 2

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Keep us.

  Kind regards

• Reboot Acer iconia W510 problem

  Every time when I start my Tablet (Acer Iconia W510) after the password a message saying something like a reboot is necessary due to some problems (the message and the Tablet works very well after that and I have not noticed any reboots after the password, but maybe before).

  In any case, the message said that the problems exist in the following files

  C:\Windows\Minidump\063013-12703-01.dmp
  C:\users\helja\appdata\local\temp\wer-31921-0.SysData.XML
  C:\Windows\MEMORY. DMP

  Also during the installation of some programs or updates and if the restart is required after installation of the tablet to the first encounters a problem and fails to restart at first but can solve the problem and Tablet so far started normally. (only a message that there are reboot problems but no precise information on the nature of the problem is given)

  Hi Kari,

  Thanks for the update.

  Sometimes, between the uninstalling and reinstalling software/drivers, it's a good idea to run the Windows Disk Cleanup utility. The disk cleanup utility to free disk space by deleting unnecessary files from your computer.

  Please consult the following link and remove some unwanted files:

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Please get back to us with the State of the question.

• Acer Iconia W510 | Demotion in Windows 8

  I upgraded my Acer Iconia W510 at 10 Windows Tablet a few months ago. It was supposed to be all very well and all that, but when a month passed, funky things began to happen.

  -The Tablet would break streaming

  -Taskbar is almost always does not

  -Entry is very slow and registry keys after 5 seconds.

  -Graphics drivers are not compatible with Windows 10

  I would like to go back to windows 8, but all windows.old and all other windows 8 file was deleted...

  10 Windows will not let me downgrade, because it has been more than 10 days that I used it.

  Is it possible that I can downgrade to Windows 8, or am I supposed to stay with a piece of a $150 of junk?

  In your win8 device, you can create recovery media that will help you to re - install win8 in win10 machine, if the recovery partition is still intact.

• Acer Iconia W510 won't batteries

  I got the W510 Iconia for a month or two, and I have a problem that the computer shuts down with no warning or anything.

  Me I found the problem, because it only happens when the battery in the keyboard is very close to 0% power.

  The thing is that there are 95% of the power of the Tablet battery, so it's as if the computer will not pass through one battery (the one on the keyboard) to the other (in the Tablet).

  I don't know if it's a Win8 parameter or if there is something I can do?

  It's really annoying, because it gives me only about 3-4 hours of battery life with the connected keyboard.

  Any help will be greatly appreciated.

  "first of all use the docking station battery, and once she is discharged at 1%, it will move to the Tablet battery." Looks like yours does not commute. The question then becomes "where is the failover of 1%? If in the material, you have a defective unit. If the software, the issue would be to find.

  For me the easiest way would be to have a switch on the printed circuit relay (with perhaps a darlington in front but discrete components.) When a good dock is connected, the tension of mooring is used to change the power source to the dock. When the dock is disconnected or goes ded the coild is greater and the main battery is attached.

  The tab work main battery if you disconnect the dock?

  If she then just had a wall out - thought: If you go into control panel > power > open the current plan and select "advanced options" will open an "Advanced settings" list and you will have a number of options.

  I don't know if the battery of the dock is considered to be local but if a switching relay, I suspect it is. Note the switch designed ACER will be 1%. The setting of low battery on the laptop I have at the moment is low at 10% and 5% critical battery. It is possible to set the 'low battery action' to 'stop, sleep or into hibernation'.

  So it is possible for Windows power management be set so as to close the tab until it reaches the passage of 1%.

  Maybe worth a visit.

  PS I do not have to exhaust all the batteries completely. Personally would fix the passage will take place at 10% or more.

• Acer Iconia W510 someone arriving kkkkk to work?

  I installed kkkkk but when I run the app, all I get is a black screen.  Someone at - it get this working?

  For the acer recovery management software, check under C:\OEM\Preload\Autorun\app\Acer Recovery Management v6

• Acer Iconia W510 Bios password forgotten

  I added a password for bios if I could change the boot mode, now I forgot the password. How can I get in the Boot section? The Tablet starts normally in windows!

  If removing the CMOS battery is not paractical you can search online for freeware reset.

• The wires for the Acer Iconia W510/W511 of power

  Hello.

  Is there anyone who had to take a closer look how the wires are connected to the 12V socket?

  Reason is, I would use the tablet in my garden, where the only power is my solar cell / battery of 12V of the summer.

  I know that I could rip it myself, but the Tablet is still under warranty, I think not only encouraged. Also I know that I can use a UPS, but a) my inverter is noisy and b) it's a bit silly to transform 12V-->--> 12V 220V

  concerning

  / Henning

  FYI here is a photo taken with my phone, as you can see just on the ground and Vout being on the ground, at the end of the connector,-, + as shown in the photo on the PSU should be child's play to hit something up.

  Image of Picasa PSU

• Acer Iconia W510 portUSB Tablet

  USB - A on the keyboard works very well.

  But connection USB key to the connector micro USB Tablet (via adapter USB A/female-microB/male) is quite dead.
  Any suggestions?

  Thank you for your proposals. But I move forward without having a USB mouse.

  But the problem is now solved: the cause of the failure was a default quit new USB adapter

• is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  Hello everyone

  is it possible to tell me how I can make program in labview that take black and with image pixels and give the coordinates of black or white pixels again to me.

  It depends on the image and the module LabVIEW available to you. LabVIEW can open bitmap and png files and convert them into tables: if it's really a monochromatic (depth of 1 bit) you get a table 2D boolean, T for white, F for black. Just look at the index of the item to its details (don't forget that LabVIEW does not use the order of rows and columns, so you must transpose and reflect the table). If you have a 24 bit bitmap, the table will contain the color in hexadecimal synthesis (000000 for black, FFFFFF is white and so on); Yet once, you simply check if the element of the array correspond to your requirements and get its index.

  With the vision that you module con open other pictures and perform advanced on them without convert them into tables. Anyway, you can just type the extension of your image using LabVIEW and see what you get.

  Here is a code snippet to open a monochromatic image

  

• Iconia W510 is not compatible with Windows 10

  My 64 GB Iconia W510 runs all the latest drivers and updates available from Acer and Microsoft.

  I have the app get 10 Windows in the taskbar and planned to upgrade. When I check the compatibility of Windows 10 within the app, it says that my PC cannot install Windows 10. It says "Intel Graphics Media Accelerator - display will not work.

  Other users Iconia W510 know the same and what is Acer boards?

  After I started this topic I received an automated e-mail to the Board asking if she has not resolved since I got a lot of responses. No, it wasn't - but it is now.

  I applied all updates from Windows Update and now the app get Windows 10 says my W510 Iconia is compatible. Update problem solved. I am aware that there is still certainly a lot of things that need to be corrected with Windows 10, but the specific problem on this issue has been resolved.

  I thank all those who contributed and repost the link to ACE padgett for his answer to how to change the driver once the upgrade to Windows 10 is done:

  http://community.Acer.com/T5/Windows-tablets-and-convertibles/w3-amp-W510-Windows-10-amp-Intel-DPTF/...

  Since MS now "reset" the W510 for Windows 10, I guess it will be soon added to the list of supported Windows 10 units Acer.

• Iconia W510 and Windows 8.1 RTM

  Hi, I tried to install Windows RTM 8.1 x 86 US of the official ISO image of Microsoft on my W510 Iconia (created the bootable flash drive), the installation worked, but the problem is that a lot of missing drivers or not after the initial installation.

  I tried to apply the latest pack of pilot of pilot site of Acer, which is designed for Windows 8, but after restarting that the Tablet is most likely stuck in infinity driver GPU reboot loop, all I see is black screen and start bar blinks every second.

  So the question is how to do a clean install of Windows 8.1 GTR on Iconia W510? Or should I wait until the correct driver pack for Windows 8.1 is out?

  Thank you

  I just want to jump in to clarify, Windows 8.1 is not released to the public and we don't post drivers or provide support for the operating system until it is officially released by Microsoft. Pilots and other media will be available on our support to http://www.acer.com site as soon as they are available after the launch.

• Acer iconia w3... ERST should update auf win going 10... Jetzt fehlermeldung

  Bildschirm soll nicht installed breast

  There're eine Lösung oder muss ich damit "leben"?

  danke fur eure antwort

  Hallo jo2,

  denke der entry von Torben, dem Iconia W510 Post, dass auch Dir helfen, ich.

  http://community.Acer.com/T5/tablets/Acer-W-510-nicht-mit-Windows-10-kompatibel/TD-p/371973/page/3

  Die beiden tablets should be den gleichen Chipsatz haben.

  Viele Grüße

  Bertram

• Iconia W510: Register a new product has failed.

  I get a message (the serial number is not valid) to try the new registry Iconia W510.

  The main advantage is to have your machine on file in case there is anything you need to know or if you need to contact support.

  One of the problems with pills is generally that when computers in desktop computers laptops/computers laptops/netbooks used to have s/n and SNID (and the Windows license keys) on stickers on the underside or back, that are not visible on the shelves (at least W3 and W510) and exist on the box or by electronic means.

  This means that if you have a problem that prevents the boot you have no way to identify the specific Acer device.

  OTOH if you are registered, all this information is preserved.

  I do both: Save and keep a copy of the label of the box.

  The interesting thing is that I had a lot of laptops over the years, including five from Acer and everything works always including a 4.77 MHz dual floppy "luggable" - what happens when you live in the same House for thutty yar.

• iMac 24 "(2006) begins with Pink/White pixelated screen"

  Hi, my iMac 24 "2006 frozen while watching a YouTube video. Its done but the video froze. Had to force a shutdown. Handed on to a screen to Pink/White pixelated patterns. It starts, Apple logo, spinning wheel, then a blip, but just a pixelated pink and white screen blank. He went 3 - 4 (screen pixelated) Apple hardware test, 4 passes a Memtest, I got in Single User Mode (screen black green pixelated), Verbose Mode (screen pixelated), Disk Mode target (no problems in this mode) and Boot Mode target (no problems in this mode) with an another iMac. Fix problems with the HARD drive and also repaired permissions. All my files are intact and my OS x (Snow Leopard) seems well intact. It won't start any disk inserted in the drive Superdrive. I can eject the disc with a re - start to hold the eject button on the keyboard or the mouse. I get the startup chime, no beeps, no codes and only get the kernel panic when I try to boot from a CD/DVD disc. Do NVRAM/PRAM rested and reset the SMC have swapped the RAM with new RAM without result. It shows a ZERO GPU issues or fail before that. But he began to act more slow when t switched to firefox as my browser. With only 3 GB of Ram, not surprising. Other odd and random questions like losing all my personal settings one night a week earlier, as well as all my applications at rest again. As when I opened iTunes I got the Welcome screen and start again with iTunes. My files were intact, but even some of my emails had to be searched and imported again. Things like this. I thought of something was about to give... and it was probably the case. I'd hoped to Ram instead of the GPU problem. I do not suspect the GPU at the moment, even if many tell me that it's probably the GPU.  The only thing I found was under "Graphics" bad Apple hardware test it reads 'Unknown Video' in the profile section. No other beeps, errors, codes, etc. other than the screen pixelated and don't pretend to begin the OSX. I know it's 10 years old, obsolete, etc... but he has run nearly impeccable and had a very easy life so far.  My next step is to try an external monitor and see what happens. I need to find and get the right adapter for this first. It's a bit frustrating that I read some say HDD, another RAM, many GPU, some the OSX... but it has passed all Tests of material thin Apple. No error codes, beeps, blinking, nothing. Any other ideas? Thank you.

  DWD

  To connect an external monitor to this iMac, you'll need a Mini DVI to... Adapter (DVI, VGA, or HDMI) .

  See > https://www.google.com/search?q=mini+dvi+adapters