Acer Predator G3620 does not start / has stopped working

Similar Questions

• New Acer desktop PC does not start

  Original title: Please help! New Acer desktop PC does not start and the Acer Support is useless! 

  Have desktop Acer running Vista.  When turning the power on, screen stops at a black screen with "American Megatrends" and "press Delete to enter Setup or F12 for BBS Popup.  Bed features but cold stops at Auto detecting USB storage devices.  Have you tried typing Delete on startup and F12 also.  Also tried F8 and F10 control.  Nothing seems to work.  Sometimes when I hit Delete or F12 at the power, subsequently will pass on their corresponding monitors but it takes literally hours sometimes.  I downloaded a Vista Recovery of Neotech and tried to have the start of the DVD system, but obviously, it didn't work.  Had the same problems when I had to restart.  Please help had only 1 month, is going to launch windows soon!

  Hello

  You have serious hardware problems and need to file a complaint with Acer.

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• 9.01 Firefox does not start, has a dialog box saying: it is still ongoing.

  Does anyone have ideas with the following Firefox Vista problem.

  9.01 Firefox does not start, has a dialog box saying: it is still ongoing.

  There is no instance of firefox in the Task Manager.
  I uninstalled firefox and reinstalled both of
  Desktop mode and course in vista.

  I have deleted all instances of firewall.

  I tried with firewall failure

  Still having the same problem

  Solved by uninstalling all the firefox - including my settings

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Office Starter has stopped working

  This morning, after an undate to my computer at night (11/09/13), Microsoft Office Starter has stopped working. The icons for the changed document in generic (orange in colour) instead of word or Excel documents. When attempting to open a word document, a screen wanting me to buy Office.  All of the suggestions.

  Computer is a HP h8 - 1287c with Windows 7,

  Microsoft - link - how to repair Office Starter

  http://support.HP.com/us-en/document/c02981221

• Microsoft 2010 Starter has stopped working - and it does not open. any suggestions?

  Computer is a HP Pavilion series g with Windows 7 Home

  The problem is that Microsoft Starter 2010 has stopped working and will not open. When I try to open it I get this message "starter stopped working - go to control panel to set" but I do not know how to fix it - can anyone help please?  Thank you hjmm

  Hello

  Please follow the instructions from the following link for repair:

  http://Office.Microsoft.com/en-us/Excel-Help/Update-repair-or-uninstall-Office-click-to-run-products-HA010382089.aspx

  Good luck.

• 4540 proBook s does not start after stopping

  Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.

  I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.

  I turned it off, by pressing the power button / stop 5 sec.

  After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.

  I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.

  One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.

  Should I change a motherboard?

  After replacing the motherboard (systemboard), everything works.

• Acer Aspire V5-473PG: FN + F5 has stopped working.

  Hello!

  FN + F5 of my Acer Aspire V5-473PG has stopped working. The other functions work fine.

  Operating system is Windows 8.

  Help, please. I don't know what to do.

  Thank you

  E.

  Hello

  See this topic from Acer: keyboard shortcuts does not and my shortcut keys do not work, how can I fix?

• Acer aspire 5742 does not start

  Hi all hope you can help - I have an acer aspire 5742 running windows 7. the problem is that it doesn't start not until after bios acer launched toward the top of page and just continuously loop around. F2 and F12 keys available no. function F8 or F10. tried to re-don't boot from the recovery disk no joy. Startup disk in the bios change still no joy. Cannot make a secure boot or system reset as unavailable F8 and F10 keys.

  fan does not (not over heating)

  HD is running

  can you please help

  Hi - I've worked with thanks to you all, I'll wish to explain how to fix at the base.

  1 - Download partition manager free 2014. http://www.Paragon-Software.com/home/pm-express/

  2. run the partition manager and select go delet.

  3 - Select the partition that has 100 MB space and delete

  4. then select the larger partition and delete.

  5 - turn off the power to the laptop

  6 - Turn on the laptop

  7. when the acer page appears, press ALT + F10 ONLY once.

  8. then I chose to install full. higher setting.

  Bingo it completed the complete installation without blocking upward on the desktop.

  This has been mentioned somewhere else where but should be simplified.

  hope that it all works for you.

• Acer V5-573 does not start. Starts sometimes for 2 seconds.

  I have a problem with my Acer V5-573, 6 months of age.

  A few days ago it is not started when you press the Start button. I removed the charger and tried again, still nothing. Then I removed the rear access to the battery. I removed the battery and tried to connect just the charger.

  Which results in the laptop to start for 2 seconds as normally, fans start for like 1 second and then just stops and the start button wont work again. This happens whenever I connect the charger and the battery power is turned off.

  Sometimes when I press the Start button, works and housing starts as it should and then at a random time, it stops once more. For the most part he just does not react on the start button.

  I have not replaced or modified the original material.

  Any ideas?

  Jyrks,

  Thanks for the update. Of after what you're saying, it sounds like there might be a hardware problem. I suggest you contact Support technique Acer and have your device put in place for the service.

• Acer A3 - A10 does not start, go to acer, explore beyond and crashes it

  I tried to use the high volume and power key combination, which does not work.  I don't have an SD card so that the issue can be eliminated.  Have you tried now on the button / stop and plug it into the charger, it works now, anyone got any suggestions as to what I also migh try.

  Thank you.

  http://metalbeans.blogspot.it/2014/09/how-to-unbrick-fix-Acer-Iconia-A3-A10.html

• VISTA computer does not start until "STOP: 0xc0000139 {Entry Point not found}".

  Original title: computer VISTA will not start

  I get this error when you try to start my vista 32 bit

  blue screen with:

  Stop c0000139 (entry point not found)
  Wcsncpy_s procedure entry point could not be located in the dynamic link library ntdll.dll.

  tried to start in every mood and nothing works. Help, please

  Hi Ad-HocHelp,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MY ACER INSPIRE 5820TG does not start black screen?

  Hi all

  It will not start, seems a connection lost the Start button.

  Ant the solution or similar problems?

  Sincerely, Kenneth

  Hello

  Could you give me more details?

• Action Script 3 code works does not start and stop button?

  OK so I have what I have created simple animations of a circle that moves from one side of the stage to the other. I have added a new layer and named her buttons. On this layer, I added 2 buttons. One for the beginning and another to stop. The goal is to get my circle to pass from one side of the stage to the other, but be able to use my buttons so that I can start and stop times random animations during playback. I've corrected all my faults of the compiler now the problem is that whenever I click on the start or the stop button, I get an error output. I have a 3rd layer which is called actions and that's where all my code is displayed. I removed this layer and put my code in the first frame of the layer of buttons to see if that would change anything but I still get the same errors of output. So I just added back my layer actions. What could I do it wrong? I made sure to name all of my video clips and buttons correctly and I even added an instance name for them.

  Here is my code and errors I get when I press play and stop button - test

  start_btn.addEventListener (MouseEvent.CLICK, startCircle);

  stop_btn.addEventListener (MouseEvent.CLICK, stopCircle);

  function startCircle(e:MouseEvent):void {}

  Circle.Play ();

  }

  function stopCircle(e:MouseEvent):void {}

  Circle.Stop ();

  }

  
  green_btn.addEventListener (MouseEvent.CLICK, greenCircle);

  red_btn.addEventListener (MouseEvent.CLICK, redCircle);

  function greenCircle(e:MouseEvent):void {}

  Circle.Play ();

  }

  function redCircle(e:MouseEvent):void {}

  Circle.Stop ();

  }

  Here's my output errors-

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at exercise2_fla::MainTimeline/redCircle()
  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at exercise2_fla::MainTimeline/greenCircle()

  What timeline you want to stop?

• Acer Aspire 471 - V5 - 6876 Touchpad has stopped working

  Has been working well for a few days then suddly stopped working (no cursor appears and movement does nothing). Keyboard mouse external, fine when it's plugged in works fine.

  Rebooted and no change, no events in the log events for material, looks fine in Device Manager. I have not discarded with drivers yet, but it is brand new and worked great for the first 2 days. Tried Fn + F7 in case it has been disabled. It's computer of my mother, and she is a pretty basic user, so it is unlikely that she played with all relevant parameters.

  Any ideas? Help?

  I have had dealing with this problem for almost a year now.  I developed a small workaround solution that may be useful to others.

  If you let the laptop all of the time and the action set to "Do nothing" when you close the lid of the laptop... (breath),

  The touchpad seems to have sleep code of its own and will remain in standby state after opening the cover.  It is a design flaw (suspected).  The workaround is to hit CTRL-ESC and use the arrow keys to navigate down to the 'Shut Down', 'Hibernate', 'Log Out', 'Lock', function 'Sleep' in the Start button menu options.   Select 'Sleep' and leave the laptop you're going to sleep.  It must be completely in mode "Eve" in 15 to 20 seconds.  Once it is in a sleep state, press the ESC key and it will wake up upward with the Mouse touchpad functionality restored.

  Hope this helps