MY ACER INSPIRE 5820TG does not start black screen?

Similar Questions

• M17x R1 does not start - black screen - fan turns, turns on the keyboard, nothing on the screen.

  Hi all

  Newbie here and desperate.

  I have a problem with M17x my son this morning. Everything worked very well and after some time, turned off the machine it self.  Now it does not start even - at least I think, it won't because there is nothing on the screen as it is empty.

  I've tried several things, including trying to move on and outside, with or without a battery of the power cord.

  I'm at a loss as to what could have happened.

  Help, please.

  Smakwam.

  The gpu of cooking is very easy in fact, that you have designated your oven to about 275 degrees cover a cookie sheet with paper and configure the map out of it by winding 4 balls of aluminum foil and their definition on each corner of the map. you never want to have it put all directly on the sheet. do Cook for about 10 minutes then cool before coming back into the laptop. Always be sure to remove all of the components and the radiator and any residue of thermal paste. After sick cooking you need to reapply a fresh thermal paste. I use artic silver 5. It is has more detailed instructions on this online, as well as photos. You want to make sure it's your video card before you do it just to be sure. I just had to do it again last week, works like a charm for me every time.

• Satellite M60-170 does not start - black screen

  I have toshiba M60-170, before it was perfect, but now I don't know what is happening?
  When I try to start my computer just for 2 sec, everything is good, then the fan of sounds of the CPU and the screen is black and the stop of HARD drive.
  So everything is stop!
  I try to start again but still does not.

  Some body told me that it is the motherboard!
  Please, someone tell me what is happens with my beautiful laptop?

  Thank you

  It does not sound good friend :(

  But let's try this; Remove the battery and unplug the power adapter for about 20 min.
  After this short period of time connect the two parts, and try to start Notepad.

  If it doesn t help the chances are that your hardware is defective. Like other guys said, it could be a fault of the motherboard or something different like CPU, memory modules.
  I can speculate on failure.

  I think that you don't have many choices. In your case, you should contact the ASP in your country for a control of the laptop.

  Good bye

• Satellite L850D does not start - black screen

  Ok.. My wife L850D had problems with black screening started upward after the toshiba screen.

  I ran a few different utilities, including a reset... it all started about 3 weeks after the victory 8.1 upgrade.

  Rang technical support who kindly informed that because we put 8.1 on that he cancelled the guarantee. (btw nice guy)
  Then refused to help.

  And went and reloaded Win 8 of my happens, just to see if it was a problem of hardware, software.
  (yes I know, but it must have been only temp).

  It starts fine, sitting there for centuries without problem.
  It wasn't until I downloaded the drivers toshiba, (Yes the good) did a reboot and hey presto. black screen again.

  A little, this would imply that there is a problem with the drivers of toshiba?

  OK so the wife decided screw it, put Win 7 on it.
  Restarted with disk in. sat and sat. Google finally informed me that I had to disable secureboot and put uefi in the csm.

  OK fine, went into the bios, off course start, changed to the csm uefi and restart the computer.
  Now I get nothing; screen all turns on, fan starts, cd rom shots on and nothing stops down immediately if I push the power button.

  I pulled the battery, external and internal, let rest for half an hour and still the same thing.

  Any ideas?

  The history is for me a little confused so let me start from the beginning with some basic stuff.
  In your ad write you didn t what model do you have exactly (L850D-xxx) and I can't check the specs of the laptop but I presume that this laptop comes with preinstalled OS, probably Win8.
  Laptop with factory preinstalled OS that includes all the necessary drivers and tools and utilities. One of them is Toshiba Recovery Media Creator. With this tool, you can create a recovery (DVD or USB) media and it lets reinstall the original OS if it s some problem and HDD recovery does not work.
  Best option now would be to use these media and install original recovery image. Did you create this recovery media?

  Generally speaking when you new notebook you do not have to use the original OS. You can install anything you want, and it has nothing to do with security. You can install any OS, all supported operating systems. So I do not understand how you could get info from technical support.

  In any case, try please connect your laptop to the power supply and restart laptop. What exactly happens? See Toshiba welcome screen? Try pressing F12 repeatedly. There any reaction?

• Pavilion dm4 does not start: black screen with cursor blinking up to no left, no error message

  Nowhere on my HP Pavilion dm4 close last night and does not restart.  When I turn on the computer, I get a black screen with a cursor blinking in the upper left corner.  I ran a variety of diagnostics and all seems OK (i.e. no error message).

  I am able to start the computer in mode 'Media' - and I see all my files.  However, I'm unable to start the computer normally.  Help, please.

  My computer is old - 1 year and 25 days to 25 days outside the warranty period.

  Thank you.

  Hello

  Boot from the new rescue CD, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart now.

  Kind regards

  DP - K

• Satellite C855D-124 does not start - black screen

  Hello

  I have a problem on my PC (by Satellite C855D-124) specifically was playing a game, and stopped from nowhere I could not do any command then off button.

  But as I returned the call and turned the lights appeared as the charge appears as a small light and also appears on your but then nothing appeared on the monitor, no warning or error message...

  Then it connects but does not seem to do anything and I would like to know if you can help with advice on what happened and what I do or what I can do...

  Sorry for the mistakes but I do on google translator...

  Hello Adrian

  For me it is not easy to understand your problem, but what you can do right now is to restart your laptop and check if the basic operations are working properly. Try restarting several times to see what will happen.

  Start the laptop computer can see you Toshiba welcome screen?
  Is there a usual activity of HARD disk at startup?

• HP 255 G2 does not start-> black screen (my fault)

  Here's the situation:

  Purchased a HP 255 G2 (windows 8.1) to be used with Linux Mint.

  I know that I have to enable the legacy mode in the BIOS and disable secure boot. I forgot the last part (disable startup secure).

  Now I can't do anything with the laptop, it does not meet the ESC or F10 to enter the BIOS to correct my error.

  I also have a USB stick with flash of the BIOS, but it does not boot from the USB key to reflash the BIOS.

  Does anyone have a clue as to what I can do next? Picked up by HP for repair?

  Hi Fd1sk,

  Your HP 255 G2 is a commercial product and get your question more exposure, I would say post in the trade forums. Here is a link to the forum Commercial Notebook.

• New Acer desktop PC does not start

  Original title: Please help! New Acer desktop PC does not start and the Acer Support is useless! 

  Have desktop Acer running Vista.  When turning the power on, screen stops at a black screen with "American Megatrends" and "press Delete to enter Setup or F12 for BBS Popup.  Bed features but cold stops at Auto detecting USB storage devices.  Have you tried typing Delete on startup and F12 also.  Also tried F8 and F10 control.  Nothing seems to work.  Sometimes when I hit Delete or F12 at the power, subsequently will pass on their corresponding monitors but it takes literally hours sometimes.  I downloaded a Vista Recovery of Neotech and tried to have the start of the DVD system, but obviously, it didn't work.  Had the same problems when I had to restart.  Please help had only 1 month, is going to launch windows soon!

  Hello

  You have serious hardware problems and need to file a complaint with Acer.

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Laptop does not start the screen to the top/black/blue

  Laptop will not start. HP Elite Book 250. Doesn't boot. Tried start run but says departure until a failed. Help, please.

  Hello Everlast87,

  Welcome to the HP Forums! I hope you enjoy your experience!

  I understand that your computer will not start correctly. I will do my best to help you with this problem! For help, try the procedure described in this document from HP: computer does not start

  This document contains the steps such as resetting the laptop and more, corresponding to the exact symptoms. I believe that this document will solve the problem. If this isn't the case, I would contact HP support by phone using equipment. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Since it a commercial product, you should post your question on the card for laptop of HP Enterprise Forumsfor more information.

  Please let me know if you have any questions or concerns. Thank you for bringing This problem on the HP Forums. Have a great day!

  Mario

• Tecra S1 - does not boot, black screen

  When I turn on my Tecra S1, fan starts, dvd starts up but screen stays black and hd light does not illuminate. If I press F8 or F12, or sometimes even if I do not support what it is, I've heard three beeps. I disconnected the battery, HD and RAM, but it seems that the same thing.

  What can I do to detect and debug the problem? Thank you

  Hey Buddy,

  I found and interesting article on the Web from Toshiba site:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  Overall this beep code means that a hardware malfunction has been detected. An ASP in your country can tell you what the problem is.

• Windows could not start - black screen

  My laptop does not start - I have a black screen with the message

  Windows could not start.  A recent hardware or software change might be the cause.

  
  

  File CLFS. SYS

  Status: 0xc00000e9

  Info: Windows could not load because a required file is missing or damaged.

  I ran the Vista startup repair disk, but results from that start-up cannot repair this computer automatically.  root cause found: critcal C:\CLFS boot file. SYS is corrupt

  I can't start in safe mode - when I try it starts to list files, stops after about 5 and then sends me the black screen message.

  Hello

  To begin with, would not be clfs.sys C:\, it would be under C:\Windows\System32. This could indicate one of the following two issues:

  (1) your boot sector is damaged.

  (2) you have a virus masquerading as a legitimate system file.

  For one, the first thing you should try are the steps detailed here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• MacBook Pro does not start, the screen is pixelated.

  MacBook Pro (2011) running iOS later.

  Screen went blue, at which time mac was turned off.  Try to be able to save and mac does not start.

  Tried to boot using utilities, but can not access this screen.  (the screen is also all the "pixelated".)

  Looking for ideas before making a trip to the Apple store.

  1 disconnect all devices (Ethernet, USB, external hard drives, mouse)

  2. start in safe mode

  3. go Finder - press Option-Go - ~/Library/ /DiagnosticReports ofnewspapers

  4. find the missing table inception report and post it please

  If your Mac will not turn on - Apple Support

• Portege 2010 does not start-> white screen

  Hello

  I need help because my 2010 does not start. When I press the power button, the power light turns on but I get nothing on the screen.

  He worked when my brother used it until the mouse has frozen and then turns off. He then lit it back in which case only the power led came up with nothing on the screen.

  The hard drive was clicking while it worked so I don't have a gut feeling that hard must the disc are dead and causing the cell not to return as when I power it on I get no hard drive light shape or sound the HDD at all.

  Even I get nothing on the screen. Not even the Red sign boot Toshiba. So, it's worry in me as well.

  Thank you, Claude

  Hello

  I put t think it is a HARD drive problem.
  If the HARD drive is dead, you will receive a message on the screen saying that the laptop is not able to find a boot device.

  If the Toshiba start screen does not appear I think that it s something wrong with the motherboard. I guess that the graphics card is dead. But to be 100% sure, verification is required.
  In my opinion, you should ask a partner or a technician for assistance.

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng