Acer z3s ringtone settings

Similar Questions

• With my Acer TO3 APN settings

  I can't access the APN settings on my laptop TO3. The only choice is to reset the APN settings. I have no datacom not connected to wifi. How should I go about this?

  on the screen of the AFN, with the ' market not "SIM, do you have a list of the APNs?

  If so, maybe you can try to modify one of the existing.

  have you tried to do a long press on the screen, if you do not have a list of the APNs?

• Setting custom ringtones, blackBerry smartphones

  Hello

  I downloaded 3 ringtones for my 8320.  I tried to put ringtones customized for specific people.

  I went to the list of contacts - edited my contact and apply a custom ring tone.

  Then in the box - less advanced - profiles I tried specifying "use an active profile EXCEPT for: and selected the friend I assigned a specific ringtone."

  When my phone rings that person or I receive an SMS on their part... It still sounds generic ringtone for all calls and sms.

  Any help would be greatly appreciated!

  Welcome to the blackberry forums.  Ringtones ringtones and SMS are set up differently as my friends shared above.  I agree with JSanders, SMS is a bit complicated, but once you get the hang of it - it won't take you long!  It took me awhile to do - but I did it! I followed these sub JSANDERS management.

  It's complicated for SMS ringtones, but possible. Follow the instructions here:

  This work around will allow you to receive specific alerts for e-mail and messages from specific senders:

  (Works with OS 4.2 and later)

  1. go to the profiles on your BlackBerry and create a custom profile, naming the name of your sender targeted.

  2. Edit and change the custom ringtones that you prefer for this contact message notifications, Messages of level 1, MMS, phone and SMS for this profile. You don't change things like the calendar, tasks, and Messenger alerts do not matter for individual users.

  3. once all your ringtone settings are defined for the new custom profile, save the changes. Now, you will be in your list of profiles and see your customized profile that there are listed with the standard.

  4. now click on the wheel, and then select new Exception.

  5. title except for what you want (would be smart to again name the name of this particular contact).

  6. in the line, click the trackball or trackwheel and select the user in your address book. They should show now in your line.

  7 scroll to the bottom and change the option use the active profile in your custom group newly created profile.

  8. you can dislodge the "Custom phone Tune" box if you already have a custom phone tune for this contact, or leave it and set it in the new custom as well profile.

  9 save the changes.

  Now once you have followed these for each SMS contact - click Save as indicated by the number nine.  Go back to your profile and click on normal or hard for the sound profile. Make sure that you have all of the exceptions already in your area of exception for those you did a SMS tone for. If you do, remove them so you your SMS does not work.  You can actually set your ringtones under each one that you set up as well. When you change your SMS sounds, you can click on the phone and change your ringtone to that specific one.  Hope you can understand this.

  Each of us will be more than happy to help you, let know us!

  Have a great day and good luck. Take advantage of your blackberry!

• Can't change ringtone on Centro

  This problem started a few days ago.  I can set the ringer on my Centro what in the list and it saves the day, but no matter what I choose, the ringtone I get when a call comes in is the ringing of the alarm.  If I go back to the preferences of his that he still has my chosen ringtone settings - the settings are apparently just ignored.  Initially, he played a few other ringtone (that I forgot it) and I deleted this ringtone to try to solve the problem, but then it just took alarm.  I could remove alarm too, but it will most likely just choose another ring to get stuck on.  Removing the battery does not solve the problem.  Thanks for any help.

  Hello carrion and welcome to the forums.

  When was the last time you hotsynced your device? The reason why I ask this is I want to suggest a hard reset as the first step to solve this problem.

  After HotSync to back up all of your PIM data, follow the directions for a Hard Reset here:

  http://KB.Palm.com/wps/portal/KB/na/Centro/Centro/Verizon/solutions/article/887_en.html

  After the Hard Reset, try to set ringtones before HotSync and restoring the information on your device. If the problem is resolved, hotsync and restore your device, and then try again. If after the restoration of your data that you have this probem again, then probably there is a problem with a program that you have installed on your device.

  Hope this helps,

  TreoAide

• Note the application crashes...

  Note the application crashes... I have discovered that by putting my phone on "airplane mode" the app not crushed. This makes me think that there may be a conflict with the iCloud? I tried to restart but the problem persists...  Anyone has a solution, pleas?

  Hello, Craig2099!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your Notes application to close unexpectedly when you try to use it. I keep a lot of information in the Notes, so I know it's important to be able to access the app. I'd be happy to help you!

  I have some troubleshooting I suggest to go through. Before you start, I recommend you make a backup of your iPhone by following the instructions here: How to backup your iPhone, iPad and iPod touch

  Once your backup is created, go through the following steps, in order. Test after each step, stopping when the problem is resolved.

  1. Leaving the app all opened, as shown here:force a nearby application on your iPhone, iPad or iPod touch

     Then, restart your iPhone after this article: restart your iPad, iPhone or iPod touch

  2. Uninstall the Notes application, and then reinstall it. Instructions on how to do this can be found here: remove the apps Apple integrated from the home screen on your device iOS with iOS 10
  3. Reset settings on your iPhone in settings > general > reset > reset all settings. This will not delete your personal data (like contacts, photos, calendar of events, etc.), but he'll be back customizable settings (as your background screen and display brightness, sounds of alert and ringtones, settings of Date and time, etc.) to the factory settings. It will also remove saved networks Wi - Fi and passwords, as well as all the VPN or APN settings used previously.
  4. Restore your iPhone settings by following the steps here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Then test Notes. If it works and not unexpectedly ends, you can restore your backup by following the steps described here: restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• The application of music Apple with ios 9.3.5 accidents

  I upgraded an iPone 5 to ios 9.3.5 and the music apple application crashes

  Hi, jpwill123!

  Thank you for using communities Support from Apple! After reading your post, I see that your Apple music app is leaving unexpectedly, which began after you updated your iOS software. I like the Apple's music and listen to it frequently, so I definitely want to make sure that your app works!

  I have some troubleshooting by what you can spend. Try the steps in order, stopping once the problem has been resolved.

  1. Exit music. You can find instructions on how to exit an application here: force a nearby application on your iPhone, iPad or iPod touch
  2. Restart the iPhone. Restart instructions can be found here: restart your iPad, iPhone or iPod touch
  3. Reset settings on your iPhone by going to settings > general > reset > reset all settings.  This will not delete your content (such as photos, Notes, calendar of events, reminders, and contacts), but he'll be back customizable settings (background screen and display brightness, sounds of alert and ringtones, settings of Date and time, etc.) to their default values. It will also remove any saved Wi - Fi networks and passwords, as well as any VPN or previously used APN settings.
  4. Back up your iPhone and restore it to factory settings. You can use iCloud or iTunes to create a backup by following the instructions in the article listed here: How to backup your iPhone, iPad and iPod touch

     Once a backup is created, you can use the instructions in the following article to restore the iPhone via iTunes on a computer: use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings

     After restoring, set your iPhone as a new device (i.e. without your backup, at least temporarily). You can register in iCloud, FaceTime iMessage and the iTunes and App Store using your Apple ID.

  5. If everything works while the iPhone is set up as a new device, you can restore your backup by following these instructions: restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• V5-572pg Image retention, contrast flashing and limitation of

  Hello, people

  I bought this super ultrabook on February of this year and just started using it.

  There are a few problems that I am aware of I checked some of them and even asked the Acer support,.

  and so now im asking you.

  And if there is any chance that you have not this laptop again and planning to buy it. Buy the one with nvidia, do not ask, but just buy the nvidia card. Less troubles there.

  _________________________ solved

  The first and the main problem im aware of is the persistence of image or whatever it's called.

  Whenever you stay inet-Surfin ' for half an hour or two hours - an chrome address bar

  with its own symbols and favorite STAR button remains on screen, even if you close the chrome.

  Still, even if you restart your computer and melted from a while. I heard that it is a picture

  support for retention and acer told me that it is not usual and I have to go to the service, but

  every single user of the laptop was told that happens some time and OK at all. no need to worry

  They said. On the screen as you can see my wallpaper of space and a slightly noticeable google chrome address bar:

  

  found an old topic on S7 series and he talked about saturated contrast by acer and it seems FINE

  Confirm it as resolved. Driver Intel HD seems to saturate contrast... the 'lower contrast (increase)' to 0 and there's nothing left.

  A question to a technician: is retention bit in contrast to saturated hurts the display somehow? and it's the retention can get permanent?

  _________________________ solved

  The second thing is freaking flashing contrast. I unchecked all points of auto contrast

  options on a intel driver and firmware but its still takes a very big bites of my nerves.

  Whenver you change a big colorful image to one another, but not so much contrast - screen changes

  the contrast itself and the eyes go BOOM like that in a few moments.

  Thank you, it seems I got a solution on the flashing. Œuvres and clocks.

  _ cannot do anything yet

  Third problem is the limitation. I don't really know how is it resolved and google a few points of it.

  But couldn't some temperatures to implement high temperatures to choke and I'm totally stupid

  at his home. So seek help. BF3 and Mortal Kombat with 60 images/s is ok, but after a few minutes its similar 5 fps

  and it's hot, but every time you take of your charging cable and bring him back he comes quickly that it was

  for some time yet... then repeat.

  And the only thing more. I do not understand why, but I just can't disable buttons brightening. Whenever I turn it off

  and then to lock my computer as it gets activated whenever I get my laptop started.

  Thank you very much. I'm sorry for my English, as I have learned through the internet and also sorry for not really

  Google search through the forum cause I'm short on traffic. Thanks for all those who will enter the topic

  I'm trying to update the message at the top of the page as soon as possible. Please correct me on my troubles because most

  topics/solutions that I found do not directly concern v5-572pg

  I do not think that Acer put available settings.

• Restoration of W3 problem

  Recently I want to redo my w3 when I got it while I was using the dvd provided with the system.  I could run the process and have it installed everything but when he starts first, and displays a screen of windows at the top saying it implants acer verification userAlaunch a message appears and says C:\Windows\system32\OEM\alaunchx\alaunchX.exe A reference was returned by the server and don't continue install. What can I do?

  Today happened 4 discs: SCD Bootable, RCD 1, RCD 2 DAY (German language pack).

  Booted SCD - seemed known Acer Recovery Management v 9.1.8

  After a few seconds asked 1 RCD and copy the images. STORMWATER MANAGEMENT. She takes a few long minutes.

  The progress of the copy then shows 72%, he asks 2 RCD and continues to copy images.

  -The difference to the original recovery DVD - the copy images copy does not stop at 86% as before but continues until 100% - I think it is a good sign for a result of different restoration. ----

  After about 20 min, I inserted disk system again, then the language pack in no time.

  Then follows the operation called update system - requires about half an hour.

  Now, after an hour of installation, system and language pack the system rebooted and installs the software. It did not go with a DVD of original restoration.

  Strange, the software installation breaks in a 5/64 point and restarts. OK, after that reboot continues to point 6/64. Curious... Follows SW installation with several reboots of Tablet. It is endless...

  You definitely need recovery W3, is much of patience. Since the beginning of the recovery is already 2.5 hours and still not finished.

  Is the last step of the installation: installation of Sysprep - Factory Mode. It takes about 30 min. installation restart, account and PC, settings, and applications. I want to record factory in Acer Recovery Management settings - it doesn't "disk configuration hard don't answer to factory settings. Strange, just after installation. I let it go and continue to install Windows and antivirus updates.

  Seems to be the problem with alaunchx.exe has been resolved. Good job, Acer. I'm really happy, I discovered the recovery DVDs in a warranty period that failed.

• I think that my system of basic windows files have been changed and currupted can someone please help!

  I get major errors that led me to think my windows files have been modified and currupted I just can't install microsoft updates they download, but I'm unable to install, I'm unable to use the Disk Defragmenter and disk scan as it said my system is already in use. I am also unable to use my acer factory restore settings because it loads but never finishes running can someone please help! I am not in a position to buy or pay for a new cd of windows so that I can make a new clean instalation as I can't afford it can someone please help!

  Download of updates of work but the installation of updates arnt working
  installation of games arnt working cd - I get errors
  disk defragment simply does not work I click top but nothing happnens - perhaps sumthing to do with priviliages admin, but I am the administrator.
  Scan disk does not work as it says system is already used but works if I put it to run at reboot
  MY acer DEFAULT factory restore setting does not work it loads but never short - that led me to believe I have no control over my privliages of basic windows system, but I am the adminsitror.

  I already had major problems when WIndows would break and stops working when you start up, I managed to solve this problem in safe mode and disabling some start up programs to check the malware was eventually attached to my system using windows scanner and malwarebytes defnder, I managed, but it seems that it is undetectable.

  I am unable to afford a new cd for a new clean instalation of windows, I think I need. can someone please

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact Acer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://us-store.Acer.com/RCD/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It comes to the use of the partition Recovery of Acer to restore factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process.

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Some manufacturers have more available Vista recovery disks.

  If this happens or the recovery Partition is damaged, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• BlackBerry Smartphones SMS sounds

  Is there anyway to have a different SMS alerts or will be the same. I got a SMS number which shall be different from all the others.

  A newbie

  Welcme to Frums

  It's complicated for SMS ringtones, but possible. Follow the instructions here:

  This work around will allow you to receive specific alerts for e-mail and messages from specific senders:

  (Works with OS 4.2 and later)

  1. go to the profiles on your BlackBerry and create a custom profile, naming the name of your sender targeted.

  2. Edit and change the custom ringtones that you prefer for this contact message notifications, Messages of level 1, MMS, phone and SMS for this profile. You don't change things like the calendar, tasks, and Messenger alerts do not matter for individual users.

  3. once all your ringtone settings are defined for the new custom profile, save the changes. Now, you will be in your list of profiles and see your customized profile that there are listed with the standard.

  4. now click on the wheel, and then select new Exception.

  5. title except for what you want (would be smart to again name the name of this particular contact).

  6. in the line, click the trackball or trackwheel and select the user in your address book. They should show now in your line.

  7 scroll to the bottom and change the option use the active profile in your custom group newly created profile.

  8. you can dislodge the "Custom phone Tune" box if you already have a custom phone tune for this contact, or leave it and set it in the new custom as well profile.

  9 save the changes.

  Now once you have followed these for each SMS contact - click Save as indicated by the number nine.  Go back to your profile and click on normal or hard for the sound profile. Make sure that you have all of the exceptions already in your area of exception for those you did a SMS tone for. If you do, remove them so you your SMS does not work.  You can actually set your ringtones under each one that you set up as well. When you change your SMS sounds, you can click on the phone and change your ringtone to that specific one.  Hope you can understand this.

  Each of us will be more than happy to help you, let know us!

  Have a great day and good luck. Take advantage of your blackberry!

• HELP blackBerry Smartphones: intercepted the calls missed on the fritz, no Exception: java.lang.NullPointerException

  Hi all - I tried to figure this thing out of these last hours... and I'm about to smash my phone against the wall (of course, I've gotten nowhere with it).

  Here's the problem: about 2 days ago I noticed that my phone is no longer maintaining missing calls in the call log (the last "missed calls" are dated 3/22). Instead, what happens is that I'm going to take notice of the number of calls on my home screen, but then when I go on my call log, I see that calls that were actually sent or received and not those missed. Not long after that notice, the following message appeared: Eception Exception: java.lang.NullPointerException. Also, until this happened, I used to get a pop up after each missed call that would tell me that I missed a call and give me the possibility to display or dismiss the alert. Is no longer comes after he missed a call, so I think it's the functionality of java which was damaged.

  So I tried to pull the battery and all that jazz, but nothing has changed. At one point, pulling the battery caused the phone to give me some other errors of java and back to put on the original page of the home screen, but after removing the battery once more, everything is returned to my original problem. Only happened once. Today I finally decided to search online for a quick fix and I was thinking about something. I tried pulling the battery and remove the sim/memory card, then tried to re-sync, then try clearing the addressbook of device and re-sync, tried to backup everything, then checked more OS updates (mine is already the most recent)... and now I'm stuck. The only thing I have not actually tried is wiping and nine with a reload of the OS. I would really like to avoid this

  Also, for some reason after that the software update RIM has checked my phone for its version of the OS, my ringtone settings reset itself. Not sure if this is related to the java problem or just a chance to complication/bad?

  Does anyone have an idea what could have happened to my phone? It is literally out of nowhere, so you can imagine my frustration...

  Any suggestions on how to fix it?

  Yes, you will need to remove the current operating system, and reload later.

  The software seems to be corrupted.

  Make sure you have the latest version of the software for your device and your carrier installed on the computer.

  It's the device, software, not the Office Manager.

  Once done, go to drive C: Program Files: common files: Research in Motion: App Loader and double-click on loader.exe.

  Once the Welcome screen appears, plug the battery in and click Next. When you see the PIN number appear after maybe a few minutes press next.

  Once he arrives at the device application part, select only things you need, uncheck all other languages, etc..

  On the last page before you click on finish, you see an option "EITHER", click here and make sure that both check boxes are fixed.

  Do not press the save option and select Finish

  This will fix the problem.

• Smartphones blackBerry Curve 8330 custom Notifications

  Hi all. New Blackberry user here. Just got the unit yesterday and spent a few hours trying to get everything put in place.

  The problem I have is trying to get my notifications customized to work with my contacts.

  OK, so here we are:

  A sender sends me a text or email and I want to let Notifier_ChiGong as the sound for them.

  B the sender sends me a text or email and I want to tell you its A on my media card to play for them.

  Now, I want all the other texts and emails from all over the world (on or not on my contact list) to play lets say its B on my media card to play for these.

  When I get a voice mail notification, I would sound completely different, let's say C sound of my media card to play in this one.

  I tried establishing exceptions and everything, but nothing works... All emails texts and voicemail notifications the same b strong and healthy parts.

  I searched the forums, but I can't understand this thing for the life of me. Everything else is coming for me as I continue to play with the device. I also spent 2 hours last night manually keying in my contacts in this unit, because my previous phone was not a smartphone, and I didn't Sync in my email software and destroy my many lists of various contacts...

  Andy help would be greatly appreciated.

  Thank you

  The f

  Surf City, NC

  I tried to adjust the exceptions, and it does not work.

  Welcome to the frums!

   

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=26725#M26725

  I copied and pasted the post below.

  It's complicated for SMS ringtones, but possible. Follow the instructions here:

  This work around will allow you to receive specific alerts for e-mail and messages from specific senders:

  (Works with OS 4.2 and later)

  1. go to the profiles on your BlackBerry and create a custom profile, naming the name of your sender targeted.

  2. Edit and change the custom ringtones that you prefer for this contact message notifications, Messages of level 1, MMS, phone and SMS for this profile. You don't change things like the calendar, tasks, and Messenger alerts do not matter for individual users.

  3. once all your ringtone settings are defined for the new custom profile, save the changes. Now, you will be in your list of profiles and see your customized profile that there are listed with the standard.

  4. now click on the wheel, and then select new Exception.

  5. title except for what you want (would be smart to again name the name of this particular contact).

  6. in the line, click the trackball or trackwheel and select the user in your address book. They should show now in your line.

  7 scroll to the bottom and change the option use the active profile in your custom group newly created profile.

  8. you can dislodge the "Custom phone Tune" box if you already have a custom phone tune for this contact, or leave it and set it in the new custom as well profile.

  9 save the changes.

  Now once you have followed these for each SMS contact - click Save as indicated by the number nine.  Go back to your profile and click on normal or hard for the sound profile. Make sure that you have all of the exceptions already in your area of exception for those you did a SMS tone for. If you do, remove them so you your SMS does not work.  You can actually set your ringtones under each one that you set up as well. When you change your SMS sounds, you can click on the phone and change your ringtone to that specific one.  Hope you can understand this.

  Each of us will be more than happy to help you, let know us!

  Have a great day and good luck. Take advantage of your blackberry!

• How to customize the ringtone in acer liquid z220?

  How to customize the ringtone in acer liquid z220?

  You must copy your ringtone (mp3 file is ok) in storage/internal or external storage/ringtones ringtones

  Then, go to settings / sound - phone ringtone

  your ringtone will appear and you can select

• How to put a ringtone for Acer Liquid Z110?

  I can't put a ringtone for my Acer Liquid z110, how can I do?

  Hello!

  You can use apps like Ringtone Toolbox or Top Riongtone Downloader, both available for download from the Google play, customize the ringtone on the Z110.  Simply copy the ringtone file in the SD card and select one of these applications to help to set as the default ringtone.

  You can do this as often as you want and build your own ringtone collection. You can change the default ringtone in the settings > Audio profiles > General. Tap on general and select phone ringing. You should see the list of all available ringtones here and choose the one you want.

  I hope that helps!

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/