ACL tcp port filter

Similar Questions

• Open the TCP Port

  I'm trying to implement a TCP port to listen to music on my home network through JRiver. The server and work remotely on my home network. But I want to access on the network side.

  I use ATT Uverse to access the internet. I disabled wireless and ATT modem to transmit to my Airport Extreme.

  I have these instructions to configure the port:

  1. Open AirPort Utility and change your AirPort Extreme or AirPort Express. Select the tab network (image). Select the sign of closer Port settings box. The Type of Firewall entry should be IPv4 Port Mapping. Enter a description like JRiver Media Center. Enter the Public 52199 TCP Port. Enter the private IP address, it's the IP address of your JRiver Media Center PC at home. Enter the TCP Port private 52199. Click on save, and then click Update. (image)

  When coming to this page, however, the firewall main entry box Type "IPv6" entered and grayed out, so it cannot be changed.

  Any help would be greatly appreciated.

  Sorry, but no image is available.

  However, to start, running the AirPort Utility > select the AirPort Extreme > change > Internet tab > Internet Options...

  What is the value to configure IPv6? If it is 'Automatically', change it to "Link-local." only (Note: I'm assuming that your ISP DO provide you IPv6 service still.)

• I can't play Backgammon MSN or Spades. Said the Coachman TCP Port... I CAN play computer well... simply not another player

  Can not play backgammon MSN or Spades said... Check TCP Port... I did nothing...

  It works very well for computer... can't play other players

  Hello

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/why-is-MSN-zone-down-this-weekend/451c019e-a29d-4A32-bd1f-e1d4137622aa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• enable outbound access to TCP ports

  would figure out how to open the outbound for TCP ports access and allow outgoing TCP access to certain ports? I know where to add a port. Put the name of am I let pass like Second Life?

  Hello Angela12,

  What operating system is installed on your computer?

  This can be useful for you:

  http://Windows.Microsoft.com/en-us/Windows7/open-a-port-in-Windows-Firewall

  Kind regards

  Savan - Microsoft technical support.

• Windows Server 2008 R2, driver HP 7410 AIO, TCP Port printing

  I just finished a new installation of Windows Server 2008 R2 64 bit on my computer that was previously using Windows Server 2008 64 bit and can't set up access to the network at my AIO 7410 printer. I would use the most recent driver Windows 7 64 bit (AIO_CDB_FSW_Full_Win_WW_130_141.exe), but the installation of the driver complains "this type of product does not have the list of the types of supported products. My first question is a driver Windows 2008 R2 64-bit will be available soon since none are currently provided?

  The way, I have Vista (AIO_CDB_Full_Network_enu_NB.exe) that does not detect the printer (192.168.1.100) of the computer (192.168.1.2) if I get the installation to complete using the USB option then try the last driver. Once done, I try to change the properties of the printer to change the used "USB001" port - virtual printer to USB port to a TCP port. However, when I click on the "add a Port" and choose "Standard TCP/IP Port" I get a dialog with a title "Add Printer Ports" and the error message "cannot add port specified. Access is denied. »

  Has anyone solved what is the root cause of this error? I am an administrator on the PC and have never seen this before curve ball.

  I should add that a test page print correctly via the USB cable and another Vista PC on the network continues to access the printer through the network so that the printer works fine.

  Thanks in advance!

  Google is my friend! Found this thread: http://forums.techguy.org/windows-vista/541278-solved-access-denied-network-printers.html that helped.

  The main steps are to create a new local printer, select the TCP port and provide the IP address of the printer. Windows query the printer and will automatically detect the HP 7410 driver is already installed and ask if it should use this driver I have answered Yes to. You should see a second printer now available in the control panel which is probably selected as the default printer. I unplugged the USB cable, print a test page using the new TCP profile and it works beautifully.

  I wish it was not so difficult to switch from a USB port to a TCP port, but I'm happy to have found a work around.

  I hope that this avoids some of the pain of losing a darker night of their lives thanks to the peculiarities of Windows!

• EasyVPN and TCP ports

  Hey people,

  You have another problem with EasyVPN that requires assistance.

  Or actually, not as a problem but more a wish.

  I saw that easyVPN is able to send the VPN on TCP traffic.

  You can also specify the port to use.

  vpnclient ipsec-over-tcp port 
  
      
  Now it would be really great if it would be possible to set up the tunnel over a standard port
  
      that is open on most firewalls: 443
  
      

  Unfortanetly when I do this:

  vpnclient ipsec-over-tcp port 443
  
  
      The tunnel is gone and wont set itself back up.
  
      
  Is it possible to do this, and send it over 443 or another standard port?
  
  The errors/messages in the EasyVPN server log:
  Built inbound TCP connection 625 for outside:10.1.0.2/1075 (10.1.0.2/1075) to identity:10.0.0.1/443 (10.0.0.1/443)
  
  Teardown TCP connection 625 for outside:10.1.0.2/1075 to identity:10.0.0.1/443 duration 0:00:08 bytes 0 TCP Reset-O
  
  
      Any ideas on this?
  
      

  Unfortunately can't use any of the well known ports, IE: anything below port 1024.

• ACE - probe on VIP sfarm TCP port failed

  Hello

  I noticed that AS addresses for TCP SYN sent by external device (in my example: GSS device) to the virtual IP address of a serverfarm is perfected OUTOFSERVICE - due to the failure rservers (ARP failed).

  A context is configured on the ACE module that is in bridge mode. VIP serverfarm is listening on a TCP port.

  Do you know why the AS sends TCP SYN ACK, even if all the rservers in the serverfarm are declining?

  How address this situation and to define the ACE to respond on these request only if VIP is ACTIVE because of the State CONTINUES to sfarm?

  Krzysztof salvation,

  What version of ACE are you running?

  When ACE meets the keepalive GSS what is the status of VIP (in-service or out-of-service) in show-service policy

  It could be a bug like the one below:

  CSCtz42618 VIP on port 443 accepts the connection when all real servers are down

  Kind regards

  Kanwal

• Error related to access TCP port 443

  Hello ,
  
  I of submit an application for approval through the application loader and I am always bump on one access error related to TCP port 443.
  Nobody knows How to set up this access on mac. I have the version 10.8.3 montain lion mac os x.
  
  Sending a photo of the error .

  
  

  If you are working behind a corporate network, contact your IT. Also try turning on your Internet/Web Sharing sharing in the system preferences topic.

• Which TCP port is used for VMWare Infrastructure Client?

  Hello, my ESXi server sits on the private network, and I'm trying to PAT so that I can access the external network using VMWare Infrastructure Client Server. Does anyone know what port is VMWare Infrastructure Client listen? Thank you.

  Priscilla

  Do the external network for VMware NAT

  I guess you mean that your server is located in the internal network and Client is on the outside.

  If the customer does not have to "listen" for connections it opens TCP ports - HI 1024-65535 to servers as follows.

  Servers (including GSX) TCP ports: 8222, 8333, 902

  If you have ESX (i) then TCP ports: 80, 443, 902

  T:OMI

  Psalm Points, please

• Provisioning of password in Active Directory and TCP ports

  Hello
  
  -I want available to users and their passwords in Active Directory
  -J' need to declare precisely what TCP ports that I use to have open in the FW:
  -TCP port if an IDM and the gateway (or server connector): 9278 (or 8759)
  -some ports between gateway and AD.
  
  Can someone tell me what ports I need between catwalk and IDM? I tried 389 and 636, but this is obviously not sufficient...
  
  Thank you.

  OK, let me tell you how it works then ;-)

  -I am speaking here of the AD adapter only, and not the connector (I'll dig this one later)
  -In the resource configuration page, you can choose the type of encryption: none, SSL, or Kerberos.

  -None:
  everything is done on the LDAP port (389) except password management which is done on port TCP 445 (Microsoft proprietary protocol)
  If 445 is blocked, no password provisioning is done and you will see the bridge trying to reach the ad on this port try ICMP (ping), then give up.

  -SSL:
  everything is done on LDAP 636. Everything.
  Why it does not work at first on my environment:
  -a been configured correctly AD? Yep: private key in the local computer AD certificate store, CA in the trusted CA on the local computer data store
  -have I forgotten to configure something on the side of the door? No, CA has been properly placed in the trusted CA on the local computer store
  -the fact that I made typo somewhere? Nope.
  -What I forgot, it is to restart the gateway service after having put the certificate in the trusted CA data store. And given that the computer does not restart for more than a month, the gateway service was not properly SSL-protocol of communication with AD...

  -Kerberos:
  I do not tried this mode. (I wanted the standard LDAP bind for some reason)

  now I can start growing hair again...

• How can I programmatically determine if a TCP port is still open

  I use STM to go from communication between a GUI and a reat-time target. Everything works great except if the TCP connection is terminated at each end for a reason any. How I can programitcally queries the port to see if the connection is still valid with on a read or write on the port?

  LabVIEW is not any sort of TCP 'polling' VI. You will need to perform an operation of TCP and get the error provided to indicate that the connection has been lost. What did you do once you have discovered if the connection is no longer valid? Did you want to open a new connection and start using that one? If so, the best way to handle this is by trapping the error conditions in your code. If you get the error "connection interrupted" you open a new connection and try the operation again. I don't know how your code is structured, so I couldn't really tell you the best way to implement this in your code.

• TCP ports used by Cisco IPS

  I looked up and down by Google and cisco.com for the answer to this, but can do not seem to find it documented anywhere.  I'm looking to identify all the ports that are required to manage a Cisco IPS so that I can open the firewall.  I understand that the following ports are necessary, but I don't know if I am missing anything, please see below:

  TCP 22: Source-online sensor Admin

  TCP 443: Source-online sensor Admin

  UDP 123: Sensor-online NTP Server Admin

  Am I missing something?  Thank you!

  Jonathan

  Boulder, Co

  Jonathon;

  If you do use automatic signatures updates and updates overall correlation, you must also enable the IPS management IP address access TCP 80 (signature and updates to GC) and UDP 53 (updates of the GC).

  Scott

• Use of TCP Port when adding sensors to virtual machines

  What port TCP VMS use when adding a sensor to VMS security monitor, etc. Device Manager?

  RDEF listener uses port?

  Port UDP 45000 remained in IDS4.x or is it only required in ID 3 x?

  Thank you.

  A listener RDEP, if I understand the context of your question, is the process on the ID device that is connected to by customers RDEP (VEI, CTR, VMS / IDSMC). Since this is a server process, he listens to TCP 443. It can be configured to listen on TCP 80, but it is not a default setting.

  The only other default port used by Cisco IDS 4.x is TCP 22 (SSH) to access the CLI and some file copy operations (scp, for example). Again, you can configure the use of TCP 23 (TELNET) to access CLI, but is not a default setting.

  In summary, a device (IDS-42XX, JOINT-2, NM-CIDS) will have only two ports open by default. 22 TCP and 443. 22 TCP is used by SSH for CLI access and TCP 443 is used to access RDEP and IDM.

  Finally, UDP 45000 is not used by Cisco IDS 4.x; It was only used in 3.x and more for the former communication protocol.

  I hope this helps.

  Alex Arndt

• TCP ports not working does not - App installed on C: (Mac OS)

  Three of us are scratching our heads...

  Background: the server machine, we install on is a build of image provided by a clients outsource partner, so we don't know all the background of the build.

  An application that has been installed on the partition C: on a Windows Server 2008 R2 64-bit computer could not use many ports to connect to and from the web service in the application - we were running IE on the server itself and trying to navigate to http://localhost: 8080 / index.html. Windows, firewall and anti virus firewall to have been temporarily disabled but without resulting effect.

  When we installed the application on another partition (e :)) [on the same physical disks such as C:], the application runs now.) Ports seem to be more 'focused '.

  We are all curious as to why this would happen? What could have been done to the partition of drive C:/or on the server that would prevent an application to use port 8080? and then to use ports such as 161, 162, 443 to communicate from the server to other devices on the network?

  Thanks in advance

  R3Stu

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How bind/listen to a local TCP port?

  Hi - creating an application internal to our business that requires the FLEX application to bind to a local port. No idea how? I tried Googling for a few hours without result. Most of the examples are to connect to a remote port and not listen to a LAN port?
  
  Thank you.

  Unfortunately not. Basically, an AIR offers the same functionality as a regular web application more which is provided by a few extra libraries that are specific (ie. system tray, access to the files). Additional network support is not one of these additions.